- Use the charger away from water sources to avoid fire or electric shock.
- To avoid electric shock, use the charger only with a 120V power outlet. - Make sure that the charger's plug is inserted all the way into the outlet.
Plug the charger into a wall outlet.
When recharging is complete, Charge Completed will be displayed on the screen. To recharge by connecting the USB cable, select [Settings] [System] [PC Connect Mode] [Charge] in the menu screen. To charge through the USB cable, the PC has to be turned on. If the PC goes into power saving mode, the battery will not be charged. Charging the battery through USB cable takes approximate 6 hours, while charging the battery with the charger takes approximate 4 hours.

Components

Location of Controls
LINE IN Jack Earphone Jack

Display

Player

Earphones

Line-In Cable

USB Cable

MENU button TOOL button
Loop Repeat/ Record button

HOLD switch

USB Host Adaptor

User Manual

Charger

Installation CD

Docking Cradle

[Back Side] RESET Hole

Power On/Off Play/Pause button Skip/Search button Select/Navigation/ Volume Control Button

Model Built-in memory

YH-J70 SB/SW 20GB

YH-J70 LB/LW 30GB

Skip/Search button
q The capacity of the useable built-in memory is less than indicated as the internal firmware uses a part of the memory as well. q The appearance of the accessories shown is subject to change for product improvement without prior notice.
USB Cable Connection Port
- Reset the player by pressing the RESET hole using a pointed object such as a safety clip.

I Docking Cradle

Front Rear
EQ/SRS Indicator Play Mode Indicator
Battery remaining indicator Song number display
Volume Indicator USB Cable Connection Port LINE OUT jack Current Track Title
- You can listen to music by putting the player on the cradle and connecting earphones or speakers via

LINE OUT jack. Play Time Indicator Progress Indicator Play/Pause Indicator
- The screen pictures are for illustration purposes only. The actual screen may differ.
Connecting the player to your PC

System Requirements.

The PC system must meet the following specifications: Install Samsung Media Studio prior before connecting the player to PC.
q Pentium 200MHz or greater q Windows XP q 50MB of available hard disk space q CD-ROM drive (double speed or greater) q USB port (2.0) supported q DirectX 9.0 or above.
I Installing Software 1 Insert the Installation CD into CD-ROM drive.
The picture shown below appears. Select [Install Samsung Media Studio].
2 Follow the instructions in the window to complete the installation.
- Log into your PC as an administrator (Main User) and install the supplied software (Media / Multimedia Studio) for Windows XP. You can change account information by selecting [Start] [Control Panel] [User Account] from the taskbar of your PC.

Continued.

I Connecting the player to your PC with a USB cable 1 Connect the USB cable to the USB port of the computer. 2 Connect the other end of the USB cable to the USB cable connection port located
at the bottom of the player.
q If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly.
Windows XP: Control Panel System Hardware Device Manager Disk Drives Samsung YH-J70 USB Device
- To use by connecting to the rechargeable cradle, connect the USB cable to the USB cable connection port on the cradle.
3 The USB driver is installed with a message saying that it is searching for a
new device. You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed.
4 Upon installation of the USB driver "Samsung YH-J70 USB Device"
will appear in the [Device Manager].

Player PC PC

Caution Caution

- Disconnecting the USB cable during file download/upload may cause malfunction of the player. - The music file order displayed in Windows Explorer may differ from the play order on your player. - If you disconnect the USB cable improperly, the files on the device may be damaged and will not play.

Using Media Studio

q Media Studio is the program that enables you to download music files to the player, and play back music files on your PC. q Click Media Studio icon from the Desktop.
3 When music files appear, select the file(s) you want to transfer, and then press the

[Transfer] button.

ENG 23 q The selected file(s) are transferred to the player. q Select [Device] [Reconstruct Library] from Media Studio if file(s) are down-
I Downloading Music Files 1 Connect the player to PC.
q A device connection window will appear on the right side of the screen.
Select [Device] [Connect Device] at the top of the screen if device connection window does not automatically appear.
loaded using removable disk. Music files are automatically classified into Artist, Album, Genre and Track folders according to tag info. Artist, Album, Genre and Track folders can be found from [Settings] [Navigation] [Music Library].
2 Select the folder with the file(s) you want to transfer from the [Library] window.
q The music files within the folder appear on the center of the screen.
Library window Device connection window
- Refer to [Help] for more detailed information. - What is an ID3 Tag? This is what is attached to an MP3 to carry information relevant to the file, such as the title, artist, album, year, genre and a comment field.
I Sending Playlist 1 Connect the player to PC. 2 Press the [File] [Add Playlist] at the top of the screen.
q Enter the name of Playlist folder when input screen appears.
4 Drag & drop the desired files into the

created Playlist.

3 Select the folder with the file(s) you want to transfer from the [Library] window.

5 Press the [Transmit]

button in the Playlist window after selecting the Playlist. q Files within the Playlist are transferred to the player. q Disconnect the player from the PC and press the MENU button on the player. Then, select [Navigation] [Playlist] [PC Playlist] to view the transfered playlist.
- A new Playlist is created when [Add] button on the Playlist window is pressed. button is pressed. A selected Playlist is deleted when [Delete] - Refer to [Help] for more detailed information.
I Formattimg the Player 1 Connect the player to PC. 2 Press the [Device] [Format] at the top of the screen. 3 Press the [Start] button when the Format screen appears.

q The memory of the player is formatted and all the saved files will be deleted.
I Ripping Tracks from an Audio CD 1 Insert your CD including tracks to rip into the CD-ROM drive of your PC. 2 Press the [Search Audio CD] button on the lower part of the screen.
q The tracks on the CD are displayed. ENG 27
3 Select tracks to be ripped and press the [Rip a CD]
screen to change rip settings.

button.

q The selected file is converted into an MP3 file. q Select [Tools] [Audio Source Format Conversion Settings] on the top of the

Change format

Save path
- Refer to [Help] for more detailed information. - If you have formatted the player on your PC, please format it once again using yepp Studio.
- Refer to [Help] for more detailed information.
I Creating a Folder 1 Connect the player to PC. 2 Press the [Create Folder]
button at the bottom of device connection window.
I Deleting a Folder/File 2 Press the [Delete]
button at the bottom of the connection windows after selecting required files or folders from the device connection windows. q A selected folder or file is deleted.

ENG 29

1 Connect the player to PC.
3 Enter the name of the new folder when an input screen appears.
q A new folder is created. q If you open a new folder and transfer a file, the file is transferred to the newly

created folder.

I To View Help on Media Studio
Press F1 after starting Media Studio.
q Help window will appear.
Installing Multimedia Studio
q Multimedia Studio is a program that supports image editing, video playback and format conversion, and multimedia album creation. ENG
Click on [Help] at the top of the screen.
q Click on [Help] and the Help window will appear.
I Installing Software 1 Insert the installation CD into the CD-ROM drive.
Select [Install Multimedia Studio].
- Music recognition technology and related data are provided by Gracenote and Gracenote CDDB Music Recognition ServiceSM. - CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are trademarks of Gracenote. Music Recognition Service and MRS are service marks of Gracenote.

2 Select language

Using Multimedia Studio
q Run Multimedia Studio from on the Desktop.
I Editing Images 1 Select the folder containing images to edit 3 Follow the instructions in the window to complete the installation.
from the directory window at the upper left-hand section of Multimedia Studio.
q The saved files will be displayed in the file list window on the right.
2 Select the image to edit.

Press the button to pause playback.
q While in Pause mode, briefly press again to resume playback.

Loop Repeating

I Starting Point
While playing a music file, press the AB button at the beginning of the loop you want to set.
q A appears in the display.

I Adjusting Volume

Adjust volume by moving the SELECT button up and down.
q The volume can be adjusted in increments between 00(MIN) and 60(MAX).

I Ending Point

Press the AB button shortly at the point you wish to end Loop Repeat.
q AB appears in the display. q The loop is played repeatedly.
Press the AB button briefly to cancel the loop.
Searching for Music/Voice Files
I To Search for Specific Parts During Play
q Press and hold the , button during playback to search for the part you want to listen to. q Release the button to resume play normally.
Setting Main Functions in Music Mode
q You can move and select using the SELECT button. q Press the button to move to the previous screen.
I Add to Favorites 1 Press the TOOL button in music mode.
q Music Tool screen appears.

Music - Tool

Add to List 1 Favorites EQ SRS List 2 List 3 Play Mode 4 List File Info. 5 List
I To Change Tracks During Play
q Press the button briefly during playback to play the next track. q Press the button briefly within 5 seconds after playback starts to move to and play the previous track. Press the button briefly after 5 seconds to play the current track from the beginning.
2 Press the SELECT button after moving to

[Add to Favorites].

3 Press the SELECT button after moving to the list

to save.

I To Change Tracks when Stopped
q Press the , button in stop/pause mode to move to the previous/next track.
q The selected file will be added to the list. q 10 Playlists can be selected. q Added files can be found at [Navigation] [Playlist] [Favorites].
I EQ 1 Press the TOOL button in music mode.
Add to Favorites Normal EQ Jazz SRS Classic Play Mode Pop File Info. Rock
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file. - When playing a VBR file, you cannot move to and play the previous track even if you press the button within 5 seconds after playback starts. - Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.

2 Press the SELECT button after moving to [EQ]. 3 Press the SELECT button after moving to
the desired sound effect mode.
q Normal Jazz Classic Pop Rock Bass Boost Bass Cut R&B Club Dance House High Boost High Cut Loud Ballad Strings Vintage Vocal Boost Bluesy User EQ q When using User EQ, the desired sound effects can be set from [Settings] [Sound Effect] [User EQ Set]. 45
I SRS 1 Press the TOOL button in music mode.
I Play Mode 1 Press the TOOL button in music mode.
Add to Favorites Normal EQ SRS SRS TruBass Play Mode WOW File Info. HD
2 Press the SELECT button after moving to [SRS]. 3 Press the SELECT button after moving to the

desired SRS mode.

2 Press the SELECT button after moving to [Play Mode]. 3 Press the SELECT button after moving to the desired

Play Mode.

q Normal : To play all the files in order one time. q Repeat: Press the SELECT button at [Repeat]. - One : To repeat one file. - Folder : To repeat the current folder. - All : To repeat all files. q Shuffle : Press the SELECT button at [Shuffle]. - Folder : To play files in the folder at random. - All : To play files at random.
Add to Favorites Normal EQ Repeat SRS Shuffle Play Mode File Info.
q Normal SRS TruBass WOW HD q SRS: You will hear 3D Streo sound. q TruBass: This is bass boost feature that adds fillness to the sound. q WOW: This feature allows you to enjoy the SRS and Trubass features simultaneously. q HD: You can enjoy more clear voice and high tones.
is a trademark of SRS Labs, Inc. WOW technology is incorporated under license from SRS labs, Inc. - Please adjust the volume to a suitable level, as the volume may increase in the SRS setting. - This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.
I File Info. 1 Press the TOOL button while the music is

playing or has stopped.

Blue Sky Best Dance 7782656 bytes Title Artist Album Genres File Size

[File Info.].

q Information on file currently playing/paused is displayed. 46

MENU Options

Press the MENU button to switch to Menu mode.
Use the SELECT button to select the menu item you want, and then briefly press the SELECT button.

Listening to FM Radio

I Switching to FM Radio Mode
ENG 49 Press the MENU button. In the Menu, select FM Radio and then press the SELECT button.

01 I Music

02 I FM Radio

03 I Navigation

04 I Text

05 I Photo/Video

06 I USB Host

07 I Games

q Frequencies are automatically stored up to 30.
q You can manually preset desired FM frequencies. q You can store up to 30 frequencies.

Recording Voice

1 Press and hold the REC button.
q Recording screen appears. q Recording screen appears.

Recording FM Radio

1 Press and hold the REC button while receiving FM.
q Current FM broadcasting will be recorded. ENG

108.00 MHz

2 Press the REC button to start voice recording. 3 Press the REC button again.
q Recording stops and the file is created. q Files are recorded and renamed V001.mp3, V002.mp3, and so on. q MP3 files are added to [Navigation] [File Search] [RECORDED] [VOICE REC]. q Press the button to play the recorded file.
2 Press the REC button. 3 Press the REC button again.
q Recording stops and the file is created. q Files are recorded and renamed F001.mp3, F002.mp3, and so on. q MP3 files are added to [Navigation] [File Search] [RECORDED] [FM REC]. q Press the button to play the recorded file.

-REC:Start

-TOOL:Exit

V001.mp3

-REC:Start -TOOL:Exit

F001.mp3

- Even if you set the sampling and bit rates higher, voice recording will default to 44.1KHz.

Recording MP3s

1 Connect the Audio Output port on the
external audio source (or the Line Out port) to the LINE IN port on the device with the Line cable.
q Press the play button on the external device to play the music to record.
Setting Main Functions in Navigation
q You can move and select using the SELECT button. q Press the button to display the previous screen.
MENU button to move to Menu and then select Navigation.
q File Search : You can search for a file from MUSIC, PHOTO, TEXT or VIDEO folder. q Music Library : You can search for a music file by Artist, Album, Genre and Track. q Playlist : You can search for a file specified as a Favorite in the player or PC Playlist transmitted through yepp Studio.
2 Press and hold the REC button.
q Recording screen appears.
2 Select the file or folder that you want to play.
q : To move to a higher-level folder. q : To move to a lower-level folder. q v,w : To move to a file or folder in the same directory. q SELECT : To move to the next folder down.
3 Press the REC button again.
q Recording stops and the file is created. q Files are recorded and renamed L001.mp3, L002.mp3, and so on. q MP3 files are added to [Navigation] [File Search] [RECORDED] [LINE REC]. q Press the button to play the recorded file.
3 Press the SELECT button.
q The selected file will be played.

Navigation

File Search Music Library Playlist

File Search

MUSIC PHOTO RECORDED TEXT VIDEO POP

L001.mp3

- Do not disconnect the Line cable during Recording. - If the battery is not sufficiently charged, the player will not completely record the file. - Adjust the volume of the external audio source to a suitable level and recode it. If the volume level is too high, the sound quality may be poor.
Sexy boms.mp3 blue.mp3 Ill be there for you.mp3 San eye.mp3 Only for you.mp3 Happy.mp3
1 Press and hold the SELECT button to move to navigation mode, or press the
I Add to Favorites 1 Press the TOOL button after moving to the music

file in Navigation Mode.

q Navigation Tool screen appears.
I Go to Top 1 Press the TOOL button in Navigation Mode.
Go to Top 1 List Add toList 2

List 3 List 4 List 5

2 Press the SELECT button after moving to [Go to Top].
q Move to the File Navigation screen.

Navigation - Tool

3 Press the SELECT button after moving to the list to save.
q The selected file will be added on the list. q 10 Playlists can be selected. q Added files can be found at [Navigation] [Playlist] [Favorites].
Go to Top Add to Favorites

I Delete File

q Recorded files can be deleted in Navigation Mode.

VOICE REC

V001.MP3 V002.MP3 V003.MP3
Other files can be deleted using Media Studio.
1 Press the TOOL button after moving recorded file to
delete in Navigation Mode.
2 Press the SELECT button after moving to [Delete File].
q The selected file will be deleted.

Go to Top Delete File

Viewing Text
q Text Viewer allows you to read text files that were created on your PC. Text files must have a.txt extension to be viewed by Text Viewer. q You can select an text file to view while listening to the music.
Setting Main Functions in Text
1 Press the MENU button to move to menu, and then select Text.
q Navigation screen appears.
I Bookmark 1 Press the TOOL button while viewing reading text.
q Text Tool screen appears.
2 Press the SELECT button after moving to [Bookmark]. 3 Press the SELECT button after moving to [Add] or [Move].
q Add : Bookmark is created on the current page. q Move : Move to a bookmark within the text file.
2 Move to the text you want to read, and then press the SELECT button.

q The selected text file will be displayed. - v,w : Volume Control. , : Move to Previous/Next Page. - Text File Selection: Press and hold the SELECT button to move to navigation during a music is playing. Move to the desired text file, and then press the SELECT button.
Door.txt Identity.txt The Little Prince.txt

Text - Tool

Bookmark Add Go to page Move Page Scroll Type Auto Scroll

The Little Prince

0011 /0102
- You can create 1 bookmark within a file or 5 bookmarks within a directory.
Once when I was six years old I saw a magnificent picture in a book, called True Stories from Nature, about the primeval for
I Go to page 1 Press the TOOL button while viewing text.
I Page Scroll Type 1 Press the TOOL button while viewing text.
2 Press the SELECT button after moving to [Go to page]. 3 Press the SELECT button after selecting the desired page.
q Move to the selected page. q SELECT: Select page. q , : Move input box.

[Page Scroll Type].

Bookmark Go to page Page Line Up/Down Scroll Type Auto Scroll Up/Down Page

desired scroll settings.

q Line Up/Down : Pressing the q Page Up/Down : Pressing the , , button moves the text by 1 line. button moves the text by 1 page.
Bookmark v v v v Go to page /0 Page Scroll Type Auto Scroll

v v v v

I Auto Scroll 1 Press the TOOL button while viewing text.

All Pages

[Auto Scroll].
Bookmark Off Go to 1 sec page Page Scroll Type 3 sec Auto Scroll

5 sec 10 sec

desired Auto scroll time.
q Off, 1, 3, 5 or 10 second is available. q The page automatically moves after the time you set.

Viewing Image Files

1 Press the MENU button to move to menu, and then select Photo/Video.
q Photo/Video screen appears. q Photo/Video screen appears.

Viewing Video Files

1 Press the MENU button to move to menu, and then select Photo/Video. 2 Press the SELECT button after selecting [Video] folder. 3 Move to the video you want to view, and then press the MENU button.
q The selected video file is played. q v,w : Volume Control. , q (Short) : Move to previous/next video , q (Long) : Fast Search q MENU: Move to menu screen. q TOOL: Check video title, progress time, total time ENG 63
2 Press the SELECT button after selecting [Photo] folder. 3 Move to the image you want to view, and then press the MENU button.
q The selected image file will be displayed. q v,w : Volume Control. , q : Move to previous/next image. q MENU: Move to menu screen. q TOOL: Image Tool screen appears when TOOL button is pressed. Select [Slide Show] [On] in Image Tool screen to view saved image files in a slide show.

Playing Games Playing Games
I Tetris 1 Press the [START] to start game.

I Chips

2 Select level using the SELECT button when level screen appears. 2 Select level using the SELECT button when level screen appears.

LINES : SCORE : 30 0

Level Lines to clear in the current level Score Current Level
The remaining number of items you have to collect at the current level
- The objective of the game is to eliminate rows by stacking various shaped blocks. - SELECT : Change block shapes , : Move Left and Right - w : Pull down - TOOL: Restart, Exit
- The objective of the game is to reach the final gate by moving obstacles and acquiring keys and items. You can pass the gate only when you get the key, and you can proceed to the next level only after collecting the required number of items at the current level. - v,w : Move Up, Down and Select , : Move Left and Right - TOOL: Restart, Exit
Setting the Advanced Functions
1 Press the MENU button to move to menu, and then select Settings.

Screen Display Settings

Press the MENU button to move to menu, and then select [Settings] [Display]. ENG 73

I Scroll Speed

q Use the SELECT button to set the scroll speed to adjust the speed of the track title movement. q Scroll speed can be set to 0.5x, 1x, 1.5x or 2x.

Scroll Speed

0.5x 1x 1.5x 2x
2 In Settings, move to the function you want and press the SELECT button to select.
q Press the button to move to the previous menu.

Settings

Display Sound Effect Time/Schedule FM Radio Record System

I Backlight

q Use the SELECT button to set the backlight time. q Backlight time can be set to Off, 3 seconds, 5 seconds, 10 seconds or Always On. q When set to Always On, the Light stays on continuously.

Backlight

Off 3 sec 5 sec 10 sec Always On

I Lcd Off Time

q Use the SELECT button to set the LCD off Time. q LCD Off time can be set to 10 seconds, 20 seconds, 30 seconds or Always On. q When set to Always On, the Light stays on continuously. q The screen switches off after the set time. The screen returns when a button is pressed.

Lcd Off Time

10 sec 20 sec 30 sec Always On

Sound Effect Settings

Press the MENU button to move to menu, and then select [Settings] [Sound Effect].
I WOW Level 1 Select the desired WOW level.
I Text Set 1 Select the desired size and color of text.
q v,w, SELECT: Move Up, Down and Select , q : Move Left, Right and Change text size

Text Set

Font Size
q WOW level control is only applied when SRS, SRS TruBass or WOW is selected. You can set each level TruBass from 0 to 10. Definition Limiter q SELECT : Move Up, Down and Select , OK Cancel q : Move Level q SRS : You will hear 3D Streo sound. q TruBass : This is a bass boost feature that adds fullness to the sound. q Definition: Restores loss of sound to the original and provides better quality of sound. q Limiter: Minimizes the sound distortion that is produced during music playback.

WOW Level

2 After setting is complete, move to OK and then press the SELECT button. I WOW Optimum - It optimizes the SRS function according to the

connected device.

q Use the SELECT button to move to the connected device. q Earphone Headphone Speaker Carpack

Color OK Cancel

2 After setting is complete, move to OK and then press

the SELECT button.

q Text is displayed in the size and color according to the setting.

WOW Optimum

Earphone Headphone Speaker Carpack

I Auto EQ

q User the SELECT button to select Automatic EQ On/Off. q On : EQ is automatically selected from Jazz, Classic, Pop or Rock according to the music file's ID3 tag information. q Off : Music file is played in the current EQ mode chosen.
EQ MODE TAG INFO CLASSIC ROCK, CHRISTIAN ROCK, ROCK, ALTERNROCK, INSTRUMENTAL ROCK, SOUTHERN ROCK, ROCK & ROLL, HARD ROCK, FOLK-ROCK, GOTHIC ROCK, PROGRESSIVE ROCK, PSYCHEDELIC ROCK, SYMPHONIC ROCK, SLOW ROCK, PUNK ROCK, DEATH METAL CLASSIC, OPERA, CHAMBER MUSIC SONATA, SYMPHONY JAZZ, JAZZ+FUNK, ACID JAZZ POP, INSTRUMENTAL POP, POP-FOLK, DANCE EURODANCE, DANCEHALL, DISCO, HIP-HOP
I User EQ Set - If User EQ is selected in EQ, EQ can be set to
your preference in the User EQ Set.
, q Use the button to move to right or left and use the SELECT button to adjust the level. After setting is complete, move to OK and then press the SELECT button.

+10dB 0dB -10dB

250 1K 4K 16K 2K 8K

Auto EQ

On Off

Cancel

CLASSIC JAZZ POP

I Clicker

q Use the SELECT button to selecct Clicker On/Off. q On : A click sound alarms whenever the buttons are pressed. q Off : No click sound when a button is pressed.

Clicker

I Fade In - Protects your ears by gradually increasing the
volume when playback starts.
q Use the SELECT button to select the desired fade time. - Off : Music is played in the selected volume. - 3 sec : Music gradually increases for 3 seconds. - 5 sec : Music gradually increases for 5 seconds.

Fade In

Off 3 sec 5 sec

User EQ Set

Time/Schedule Settings
Press the MENU button to move to menu, and then select [Settings] [Time/Schedule].

3 Press the TOOL button.

q Keypad Set : You can change the keypad. You can select Korean Numeric Capital English Font Small English Font Special Characters. q Clear : Delete the whole memo.
Memo - Tool Keypad Set Clear 123 ABC abc !~^
I Memo 1 Select [New Memo] when memo screen appears. 2 Enter desired contents.
q Input Procedure ,and Move to a desired key by using v,w, buttons and press the SELECT button. Press the SELECT button twice to enter the second letter of the key. Ex) To enter MOVE, Move to the corresponding key and press the SELECT button. (Once) (3 times) (3 times) q Select to delete a letter, and select
4 After typing is complete, move to OK and then

press the SELECT button.

- Move to a memo to delete in the Select Memo list screen and press the TOOL button. Then, select [Delete] to delete the memo.

OK (2 times)

I Calendar 1 Press the TOOL button in calendar screen.
q Day: Move by day q Month: Move by month q Year: Move by year

Calendar

to enter blank space.
- You cannot enter more than a page of memo.
2 Move to the date you want to check.
q v,w : Move up and down , q : Move left and right
3 Press the SELECT button after checking.
q Previous screen is displayed. 78 79

I Sleep 1 Use the

FM Radio Settings
Press the MENU button to move to menu, and then select [Settings] [FM Radio]. ENG

FM Region

Korea/US Other Country
button to set sleep time.
q Sleep time can be set to Off, 10~120 minutes. The player will automatically turn off after the time you set. q When sleep time set to Off, the function is disabled.

Sleep Time

Sleep Time Off

I FM Region

q Use the SELECT button to select the desired

I Date/Time

q You can set the current date and time.

No Yes

MENU Table

MENU
MUSIC FM Radio Navigation Text Photo/Video USB Host Games
Clear Screen Othello Omok Tetris Chips
Volume = 40 Repeat = OFF Sound Effects Settings = OFF Backlight = 3 Seconds Initial Settings

I About

q Select About to check total capacity, available capacity and the software

Sound Effect

WOW Level WOW Optimum Auto EQ Fade In User EQ Set Clicker

Time/Schedule

Memo Calendar Sleep Date/Time

FM Radio

FM Region FM Search Level

Record

Bit Rate Auto Sync

System

Languages File Language Play Speed Resume PC Connect Mode Motion Sensor Defualt Set About

version.

Backlight Lcd Off Time Text Set
q Use the SELECT button to move and select.
q Use the SELECT button to select default set Yes or No. q If you select [Yes], a popup window will be displayed. If you select [OK], all selected

Troubleshooting

q After connecting the player to PC, run Media Studio, and then select [Device] [Reconstruct Library].
The playback time display during playback does not seem right. q Check if you are not playing a VBR (Variable Bit Rate) file. VBR files are only partially supported. The buttons on the player does not work.
The player doesn't work. There is nothing showing on the display panel.
q Reset the Player. q Connect the charger. q Make sure the Hold switch is in the off position.
q Make sure the Hold switch is in the off position. q Check if USB cable is connected. When USB cable is connected, the buttons will not work.
There is no sound even if I press the Play button in Music mode.
q Check if there are MP3 or WMA files on the player. q Non-playable file formats (e.g. MPEG1 LAYER 1 file) cannot be played.
The LCD window is too dark. q Check the backlight time/LCD off time. During playback, some unknown characters are displayed on the display panel. q Unsupported languages will be indicated by a question mark (?). "Null" appears on the playback screen in place of the selected music file's title. q There is no ID3 tag information for the music file. Edit the song title, artist, and album

information of the song.

I cannot download files.
q Check the battery's power level. q Check the USB connection between the player and your PC. q Check if there is the unplug/eject or Safely Remove Hardware icon located in your icon tray at the bottom of your screen.
The Backlight is off. q Please check the Backlight settings. q Backlight is automatically disabled for longer playback in case of low battery power.
It takes a long time when I search songs by Song Title, Artist, or Album. q If there are many music files on your player, it may take longer to read them.