Quick Installation Guide

TE100-P1U

Table of Contents Table of Contents
English.... 1. Before You Start... 2. How to Connect... 3. Configure the Print Server... 4. Add the Network Printer to your PC... 5

Troubleshooting... 7

Version 03.24.06

1. Before You Start

Package Content TE100-P1U Quick Installation Guide Utility CD-ROM Power Adapter (5V, 2.5A)

System Requirements

CD-ROM Drive CPU: Intel Pentium 100Mhz or above Memory: 8MB or above Windows 2003/XP/2000/ME/98SE, Unixware, Linux, Mac OS X

Application

10/100Mbps USB 2.0 Print Server

(TE100-P1U)

Cable/DSL 4-Port Broadband Router (TW100-S4W1CA)

Internet

Cable/DSL Modem

USB Printer

Workstations with Fast Ethernet Adapter (TE100-PCIWN)
*Mac Systems are only compatible with Post-Script printers

English

2. How to Connect
Note: Please power off all printers before connecting them to the print server. 1. Connect a RJ-45 network cable from a Switch/Router to the LAN port of the Print Server.
2. Connect the USB Printer to the USB port of the Print Server.
3. Connect the AC Power Adapter to the Print Server and then to a power outlet.

4. Power ON printer.

3. Configure the Print Server
Note: The Print Server can be managed using the PS-Utility or a web browser. For Mac Users, change your computers IP address to 192.168.0.X (where X is an available number from 2-254), and enter 192.168.0.1 in your web browser to access the Print Server's Web Utility. (The Print Server Utility only requires to be installed on one of the network PCs)

For Windows Users

1. Insert the Utility CD-ROM into your computer's CD-ROM Drive and then click Install Utility. Follow the InstallSheild Wizard instructions. Click Finish.
2. Click Start > All Programs > PSUtility, and then click PS-Utility.
3. Click the Print Server and click Change IP Address. Manually set the IP Address of the Print Server and then click OK. Note: The IP Address must match the same network segment as your computer.

4. Click Show Web Setup.

5. Write down the Server Name and Port Name.
Print Server configuration is now complete.
4. Add the Network Printer to your PC
Note: For TCP/IP Printing instructions, please consult the Users Guide included on the Utility CD-ROM.

Windows 2000/XP

1. Go into the Control Panel and double-click the Printers and Faxes icon. Click Add Printer and then click Next.
2. Select Network Printer and then click Next.
3. Select Connect to this printer and type in the server name and the printer name in the following format: \\server_name\printer_name Click Next.

4. Click OK.

5. Select the appropriate driver for your printer and then click OK.

6. Click Finish.

7. Repeat steps 1 to 6 to add the network printer to other computers on the network.
Add Network Printer is now complete.
For detailed information regarding the TE100-P1U configuration and advanced settings, please refer to the User's Guide included on the Utility CD-ROM or TRENDnet's website at www.trendnet.com

Troubleshooting

Q1. I correctly typed in the print server name and printer name, but I still cannot add a network printer. What should I do? A1. Double check your hardware connections; make sure that the print server and printer are powered ON and are properly connected. Also verify that the spelling of the server name and printer name are correct. Q2. I verified that the hardware installation is correct and that the print server name and printer name are correct, but I still cannot find the network printer. What should I do? A2. Make sure that the print server name and printer name are entered correctly. There should be no spaces, and the back slashes that separate the print server name and printer name should be this, \\, instead of this, //. Note that the Port Name is the same name used to identify the Printer Name. Q3. I successfully added a network printer to my computer and I can print a test page, but I cannot print anything from Microsoft Word or other applications. A3. Make sure to set the newly installed network printer as your default printer. Click Start and then click Printers & Faxes, verify that your printer icon has a check on it. Q4. I configured my print server to automatically receive an IP Address from a DHCP server, and now I cannot go into the print server's web utility. A4. Open PS-Utility v3.00 (See 3. Configure the Print Server) to locate your print server's IP Address. For Mac users, press the Reset button at the back of the TE100-P1U, hold the button for 15 seconds, release the button, and enter http://192.168.0.1 in a web browser to access the web features. Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.

Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.
TRENDnet Technical Support
US/Canada Support Center European Support Center

Contact

Telephone: 1(866) 845-3673 Email: support@trendnet.com
Visit our website for detail contact information http:// www.trendnet.com/support

Tech Support Hours

24/7 Toll Free Tech Support
Product Warranty Registration
Please take a moment to register your product online. Go to TRENDnets website at http://www.trendnet.com
3135 Kashiwa Street Torrance, CA 90505 USA
Copyright 2006. All Rights Reserved. TRENDnet.