Regulatory notes and statements Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for example: Onboard airplanes, or In an explosive environment, or In case the interference risk to other devices or services is perceived or identified as harmful In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please ask for authorization to use these devices prior to operating the equipment.
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, of the substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.
USA-FCC (Federal Communications Commission) statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of this device.
FCC Radio Frequency Exposure statement
This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65 and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. The radiated output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is minimized. When nearby persons has to be kept to ensure RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help.

Export restrictions

This product or software contains encryption code that may not be exported or transferred from the US of Canada without an approved US Department of Commerce export license.

Safety Information

Your device contains a low power transmitter. When device is transmitted it sends out radio frequency (RF) signal. CAUTION: To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Protection requirements for health and safety Article 3.1a
Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient.
Protection requirements for electromagnetic compatibility Article 3.1b
Testing for electromagnetic compatibility according to EN 301 489-1, EN and EN 55024 has been conducted. These are considered relevant and sufficient.
Effective use of the radio spectrum Article 3.2
Testing for radio test suites according to EN 300 328-2 has been conducted. These are considered relevant and sufficient.
CE in which Countries where the product may be used freely:
Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland. France: except the channel 10 through 13, law prohibits the use of other channels.

TABLE OF CONTENT

ABOUT THIS GUIDE... 1
Purpose...... 1 Terms/Usage....... 1 Overview of this Users Guide..... 1

INTRODUCTION... 2

Applications:....... 2 Supported Features:...... 3

UNPACKING AND SETUP... 4

Unpacking...... 4 Setup....... 4
HARDWARE INSTALLATION... 5
Front Panel...... 5 Rear Panel...... 6 Side Panel....... 6 Hardware connections..... 7 Connecting the WLAN Router..... 7 Check the installation...... 7
PC NETWORK TCP/IP SETTING... 8
Windows 95/98/ME...... 8 Windows 2000...... 9 Windows XP...... 10

CONFIGURATION.... 11

Login to the WLAN Router through Wireless LAN.... 11 Login to the WLAN Router..... 11 Using the Web Browser...... 11 Setup Wizard...... 12 Advanced configuration...... 22 Main...... 22 LAN & DHCP Server..... 22 WAN...... 23 Password....... 24 Time....... 25 Dynamic DNS...... 26 Wireless...... 27 Basic....... 27 Security...... 28 Advanced...... 30 Wi-Fi Protected Setup...... 31 Status....... 31 Device Information...... 32 Log...... 33 Log Setting...... 33 Statistic...... 34 Wireless...... 36 v
Routing....... 37 Static....... 37 Dynamic...... 38 Routing Table...... 39 Access...... 40 Filters....... 40 Virtual Server...... 44 Special AP...... 45 DMZ....... 46 Management...... 46 Remote Management...... 46 Tools...... 48 Restart...... 48 Settings...... 49 Firmware....... 50 Ping Test....... 50

Supported Features: High speed data transfer rate NAT for sharing 1 IP address to all LAN/WLAN users. PPPoE and PPTP protocol for Dial-Up ADSL. 64/128 bit WEP Encryption WPA-PSK, WPA2-PSK, WPA, WPA2 security DHCP Server / Client. UPnP (Universal Plug and Play). WPS (Wi-Fi Protected Setup) Virtual Server mapping. MAC filtering. Protocol/IP filtering Domain/URL filtering DDNS Upgradeable firmware for future function. Simple installation using Setup Wizard. Easy configuration via Web Browser.

UNPACKING AND SETUP

This chapter provides unpacking and setup information for the IEEE 802.11b/g/n Wireless Home Router. Unpacking Open the box of the WLAN Router and carefully unpack it. The box should contain the following items: TEW-632BRP Wireless N Home Router Easy Go Installation CD Multi-Language Quick Installation Guide 2 x 2dBi gain dipole antenna External power adapter 1.5m (5ft) Cat.5 Ethernet Cable If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the WLAN Router can be performed properly using the following methods: The power outlet should be within 1.82 meters (6 feet) of the Broadband Router. Visually inspect the DC power jack and make sure that it is fully secured to the power adapter. Make sure that there is proper heat dissipation and adequate ventilation around the Broadband Router. Do not place heavy objects on the Broadband Router. Fix the direction of the antennas. Try to place the Wireless Router in a position that can best cover your wireless network. Normally, the higher you place the antenna, the better the performance will be. The antennas position enhances the receiving sensitivity.

HARDWARE INSTALLATION

Front Panel The figure below shows the front panel of the IEEE 802.11b/g/n Wireless Home Router.

Front Panel

POWER This indicator lights green when the hub is receives power, otherwise it is off. SYSTEM This indicator blinking green means the WLAN Router is working successfully. Otherwise, this indicator always on or off means the function of the WLAN Router has failed. WAN (Link/ACT) The indicators light green when the WAN port is connected to a xDSL/Cable modem successfully. The indicators blink green while the WAN port was transmitting or receiving data from the xDSL/Cable modem. WLAN (ACT) This indicator lights green when there are wireless devices connected and transmitting data to the WLAN Router. LAN (Link/ACT) These indicators light green when the LAN ports were connected successfully. These indicators blinking green while the LAN ports were accessing data.
Rear Panel The figure below shows the rear panel of the IEEE 802.11b/g/n Wireless Home Router.

Windows 2000 Double click on the My Computer icon on the desktop. When My Computer window opens, open the Control Panel and then open the Network dialup connection applet. Double click on the Local area network connection icon. Select Properties to enter the TCP/IP setting window. 1. In the Local area network status window, click on Properties. 2. In the Local area network connection window, first select TCP/IP setting and then select Properties. 3. Set both IP address and DNS to Automatic configuration.
Windows XP Point the cursor and click the right button on the My Network Place icon. Select properties to enter the TCP/IP setting window. 1. Set IP address to Obtain an IP address automatically. 2. Set DNS to Obtain DNS server address automatically.

CONFIGURATION

First make sure that the network connections are functioning normally. This WLAN Router can be configured using Internet Explorer 5.0 or newer web browser versions. Login to the WLAN Router through Wireless LAN Before configuring the WLAN Router through WLAN, make sure that the SSID, Channel and the WEP is set properly. The default setting of the WLAN Router that you will use: SSID: TRENDnet Channel: 6 Security: disable Login to the WLAN Router Before you configure this device, note that when the WLAN Router, make sure the host PC must be set on the IP subnet that can be accessed by the xDSL/Cable modem. For example, when the default network address of the xDSL/Cable modem Ethernet interface is 192.168.10.x, then the host PC should be set at 192.168.10.xxx (where xxx is a number between 2 and 254), and the default subnet mask is 255.255.255.0. Using the Web Browser 1. Open Internet Explorer 5.0 or above Internet browser. 2. Enter IP address http://192.168.10.1 (the factory-default IP address setting) to the URL web address location. 3. When the following dialog box appears, enter the user name and password to login to the main configuration window, the default username and password is admin.
Setup Wizard Setup wizard is provided as part of the web configuration utility. User can simply follow the step-by-step process to get the wireless Router configuration ready to run in 6 easy steps by clicking on` the Wizard button on the function menu. The following screen will appear. Please click Next to continue.

Step 1: Set your new password Setting the new admin password of the WLAN Router. Please click Next to continue.
Step 2: Choose time zone Select the time zone from the drop down list. Please click Next to continue.
Step 3: Set LAN connection and DHCP server Set users IP address and mask. The default IP is 192.168.10.1. If the user chooses to enable DHCP, please click Enable. DHCP enabled is able to automatically assign IP addresses. Please assign the range of IP addresses in the fields of Range start and Range end. Please click Next to continue.
Step 4: Set Internet connection The WLAN Router will attempt to auto detect your Internet Connection.
Obtain IP automatically (DHCP client):
If the user has enabled DHCP server, choose "Obtain IP automatically (DHCP client)" to have the WLAN Router assign IP addresses automatically.

Fixed IP Address:

If the Internet Service Provider (ISP) assigns a fixed IP address, choose this option and enter the assigned WAN IP Address, WAN Subnet Mask, WAN Gateway Address and DNS Server Addresses for the WLAN Router.
PPPoE to obtain IP automatically:
If connected to the Internet using a PPPoE (Dial-up xDSL) connection, and the ISP provides a User Name and Password, then choose this option and enter the required information.
PPPoE with a fixed IP address:
If connected to the Internet using a PPPoE (Dial-up xDSL) connection, and the ISP provides a User Name, Password and a Fixed IP Address, choose this option and enter the required information.
If connected to the Internet using a PPTP xDSL connection, enter your IP, Subnet Mask, Gateway, Server IP, PPTP Account and PPTP Password.
If connected to the Internet using a L2TP (Dial-up xDSL) connection and the ISP provides a Server IP, Account and Password information, choose this option and enter the required information.
Big Pond Cable(Australia):
If your ISP is Big Pond Cable, the ISP will provide a User Name, Password, Authentication Server and Login Server IP (Optional). Choose this option and enter the required information.
Step 5: Set Wireless LAN connection Click Enable to enable Wireless LAN. If user enables the Wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting to connect to the WLAN Router.
Step 6: Setup completed The Setup wizard is now completed. The new settings will be effective after the WLAN Router restarts. Please click Restart to reboot the WLAN Router. If user does not want to make any changes, please click Exit to quit without any changes. User also can go back to modify the setting by clicking Back.

Advanced configuration Main The screen enables users to configure the LAN & DHCP Server, set WAN parameters, create Administrator and User passwords, and set the local time, time zone, and dynamic DNS. LAN & DHCP Server This page allows the user to configure LAN and DHCP properties, such as the host name, IP address, subnet mask, and domain name. LAN and DHCP profiles are listed in the DHCP table at the bottom of the screen.
Host Name: Type the host name in the text box. The host name is required by some ISPs. The default host name is "AP-Router." IP Address: This is the IP address of the WLAN Router. The default IP address is 192.168.10.1. Subnet Mask: Type the subnet mask for the WLAN Router in the text box. The default subnet mask is 255.255.255.0. DHCP Server: Enables the DHCP server to allow the WLAN Router to automatically assign IP addresses to devices connecting to the LAN. DHCP is enabled by default. All DHCP client computers are listed in the table at the bottom of the screen, providing the host name, IP address, and MAC address of the client.
Start IP: Type an IP address to serve as the start of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the WLAN Router. End IP: Type an IP address to serve as the end of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the WLAN Router. Domain Name: Type the local domain name of the network in the text box. This item is optional. Lease Time: The lease time specifies the amount of connection time a network user be allowed with their current dynamic IP address. WAN This screen enables users to set up the WLAN Router WAN connection, specify the IP address for the WAN, add DNS numbers, and enter the MAC address.
Connection Type: Select the connection type, either DHCP client, Fixed IP, PPPoE, PPTP, L2TP or BigPond Cable from the drop-down list.
WAN IP: Select whether user wants to specify an IP address manually, or want DHCP to obtain an IP address automatically. When Specify IP is selected, type the IP address, subnet mask, and default gateway in the text boxes. Users ISP will provide with this information. DNS 1/2: Type up to three DNS numbers in the text boxes. Users ISP will provide this information. MAC Address: If required by users ISP, type the MAC address of the WLAN Router WAN interface in this field. Password This screen enables users to set administrative and user passwords. These passwords are used to gain access to the WLAN Router interface.
Administrator: Type the password the Administrator will use to log into the system. The password must be typed again for confirmation. The Administrator can also authorize users the ability to configure the WLAN Router. User: Type the password the User will use to log in to the system. The password must be typed again for confirmation.

Time This screen enables users to set the time and date for the WLAN Router's real-time clock, select properly time zone, and enable or disable daylight saving.
Local Time: Displays the local time and date. Time Zone: Select the time zone from the drop-down list. Synchronize the clock with: Select the clock adjustment method form the dropdown list. Automatic: Automatically adjust the system time from NTP Server. Manual: Manually adjust the system time when you press the Set Time button. Default NTP server: The Simple Network Time Protocol (SNTP) server allows the WLAN Router to synchronize the system clock to the global Internet through the SNTP Server. Specify the NTP domain name or IP address in the text box. Set the time: Manually setting the WLAN Router system time, press the Set Time button to update the system time. Daylight Saving: Enables users to enable or disable daylight saving time. When enabled, select the start and end date for daylight saving time.
Dynamic DNS This synchronizes the DDNS server with your current Public IP address when you are online. First, you need to register your preferred DNS with the DDNS provider. Then, please select the DDNS address in the Server Address and fill the related information in the below fields: Host Name, User Name and Password.
Wireless This section enables users to configuration the wireless communications parameters for the WLAN Router. Basic This page allow user to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications.
Enable/Disable: Enables or disables wireless LAN via the WLAN Router. SSID: Type an SSID in the text box. The SSID of any wireless device must match the SSID typed here in order for the wireless device to access the LAN and WAN via the WLAN Router. Channel: Select a transmission channel for wireless communications. The channel of any wireless device must match the channel selected here in order for the wireless device to access the LAN and WAN via the WLAN Router. 802.11 Mode: Select one of the following: Mixed 802.11g and 802.11g - Select if you are using both 802.11b and 802.11n wireless clients. Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. Channel Width: Select the Channel Width: Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients.

SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able to view the WLAN Routers SSID. For security purposes, users may want to disable SSID Broadcast to ensure only authorized clients have access. Security
Authentication Type: The authentication type default is set to open system. There are four options: Disabled, WEP, WPA, WPA2 and WPA-Auto. WEP Encryption
WEP: Open System and Shared Key requires the user to set a WEP key to exchange data with other wireless clients that have the same WEP key. Mode: Select the key type: ASCII or HEX
WEP Key: Select the level of encryption from the drop-down list. The WLAN Router supports, 64 and 128-bit encryption. Key 1 ~ Key 4: Enables users to create up to 4 different WEP keys. Manually enter a set of values for each key. Select a key to use by clicking the radio button next to the key. WPA/WPA2/WPA-Auto Security
If WPA, WPA2 or WPA-Auto EAP is selected, the above screen is shown. Please set the length of the encryption key and the parameters for the RADIUS server. Cipher Type: Select the cipher type for TKIP or AES encryption, Selected Auto for auto detects the cipher type. RASIUS Server: 1. Enter the IP address, Port used and Shared Secret by the Primary Radius Server. 2. Enter the IP address, Port used and Shared Secret by the Secondary Radius Server. (optional)
WPA-PSK/WPA2-PSK Security If WPA, WPA2 or WPA-Auto PSK is selected.
Cipher Type: Select the cipher type for TKIP or AES encryption, Selected Auto for auto detects the cipher type. Passphrase: The length should be 8 characters at least. Advanced This screen enables users to configure advanced wireless functions.
Beacon Interval: Type the beacon interval in the text box. User can specify a value from 25 to 1000. The default beacon interval is 100. RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes data flow. If data flow is irregular, choose values between 256 and 2346 until data flow is normalized. Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer error rates are high, choose values between 1500 and 2346 until packet transfer rates are minimized. (NOTE: set this fragmentation threshold value may diminish system performance.)
DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text box. User can specify a value between 1 and 255. The default value is 1. Antenna Transmit Power: Adjust the power of the antenna transmission by selecting from the drop down list: full, half (-3dB), quarter (-6dB), eighth (-9dB) or min. Wi-Fi Protected Setup This screen enables users to configure the Wi-Fi Protected Setup function.

Time: Displays the time and date that the log entry was created. Message: Displays summary information about the log entry. Log Setting This screen enables users to set Router Log parameters.
SMTP Authentication: Selected the Enabled if the SMTP server need for authentication, fill in account name and password in SMTP Account field and SMTP Password field. SMTP Account: If the SMTP Authentication enabled, fill in the SMTP account name here. SMTP Password: If the SMTP Authentication enabled, fill in the password of the SMTP account here. SMTP Server: Type your SMTP server address here. Send to: Type an email address for the log to be sent to. Click Email Log Now to immediately send the current log. Syslog Server: Type the IP address of the Syslog Server if user wants the WLAN Router to listen and receive incoming Syslog messages. Log Type: Enables users to select what items will be included in the log: System Activity: Displays information related to WLAN Router operation. Debug Information: Displays information related to errors and system malfunctions. Attacks: Displays information about any malicious activity on the network. Dropped Packets: Displays information about packets that have not been transferred successfully. Notice: Displays important notices by the system administrator. Statistic This screen displays a table that shows the rate of packet transmission via the WLAN Routers LAN, Wireless and WAN ports (in bytes per second).
Click Reset to erase all statistics and begin logging statistics again.
Wireless This screen enables users to view information about wireless devices that are connected to the WLAN Router.
Connected Time: Displays how long the wireless client has been connected to the WLAN Router. MAC Address: Displays the wireless clients MAC address.
Routing This selection enables users to set how the WLAN Router forwards data: Static and Dynamic. Routing Table enables users to view the information created by the WLAN Router that displays the network interconnection topology. Static It enables users to set parameters by which the WLAN Router forwards data to its destination if the network has a static IP address.

Network Address: Type the static IP address the network uses to access the Internet. Contact the ISP or network administrator for this information. Network Mask: Type the network (subnet) mask of the network. If this field is left blank, the network mask defaults to 255.255.255.0. Contact the ISP or network administrator for this information. Gateway Address: Type the gateway address of the network. Contact the ISP or network administrator for this information. Interface: Select an interface, WAN or LAN, to connect to the Internet. Metric: Select which metric that the user wants to apply to this configuration. Add: Click to add the configuration to the static IP address table at the bottom of the page. Update: Select one of the entries in the static IP address table at the bottom of the page, and after changing parameters, click Update to confirm the changes. Delete: Select one of the entries in the static IP address table at the bottom of the page and click Delete to remove the entry.
New: Click New to clear the text boxes and add required information to create a new entry. Dynamic This screen enables users to set NAT parameters.
Transmit: Click the radio buttons to set the desired transmit parameters, Disabled, RIP 1, or RIP 2. Receive: Click the radio buttons to set the desired transmit parameters, Disabled, RIP 1, or RIP 2.
Routing Table This screen enables users to view the routing table of the WLAN Router. The routing table is a database created by the WLAN Router that displays the network interconnection topology.
Network Address: Displays the network IP address of the connected node. Network Mask: Displays the network (subnet) mask of the connected node. Gateway Address: Displays the gateway address of the connected node. Interface: Displays whether the node is connected via a WAN or LAN. Metric: Displays the metric of the connected node. Type: Displays whether the node has a static or dynamic IP address
Access This page enables you to define access restrictions, set up protocol and IP filters, create virtual servers, define access for special applications such as games, and set firewall rules. Filters Using filters to deny or allow the users to access. Five types of filters to select: MAC, URL blocking, IP, Protocol filter and Domain blocking.

MAC Filters

MAC Filter: Enables you to allow or deny Internet access to users within the LAN based upon the MAC address of their network interface. Click the radio button next to Disabled to disable the MAC filter. Disable: Disable the MAC filter function. Allow: Only allow computers with MAC address listed in the MAC Table. Deny: Computers in the MAC Table are denied Internet access. MAC Table: Use this section to create a user profile which Internet access is denied or allowed. The user profiles are listed in the table at the bottom of the page. (Note: Click anywhere in the item. Once the line is selected, the fields automatically load the item's parameters, which you can edit.) Name: Type the name of the user to be permitted/denied access. MAC Address: Type the MAC address of the user's network interface. Add: Click to add the user to the list at the bottom of the page. Update: Click to update information for the user, if you have changed any of the fields. Delete: Select a user from the table at the bottom of the list and click Delete to remove the user profile.

Enable: Click to enable or disable the virtual server. Name: Type a descriptive name for the virtual server. Protocol: Select a protocol (TCP or UDP) to use for the virtual server. Private Port: Type the port number of the computer on the LAN that is being used to act as a virtual server. Public Port: Type the port number on the WAN that will be used to provide access to the virtual server. LAN Server: Type the LAN IP address that will be assigned to the virtual server. Add: Click to add the virtual server to the table at the bottom of the screen. Update: Click to update information for the virtual server if the user has selected a listed item and has made changes. Delete: Select a listed item and click Delete to remove the item from the list. Cancel: Click Cancel button to erase all fields and enter new information.
Special AP This screen enables users to specify special applications, such as games which require multiple connections that are blocked by NAT. The special applications profiles are listed in the table at the bottom of the page. Note: When selecting items in the table at the bottom, click anywhere in the item. The line is selected, and the fields automatically load the item's parameters, which user can edit.
Enable: Click to enable or disable the application profile. When enabled, users will be able to connect to the application via the WLAN Routers WAN connection. Click Disabled on a profile to prevent users from accessing the application on the WAN connection. Name: Type a descriptive name for the application. Trigger: Defines the outgoing communication that determines whether the user has legitimate access to the application. Protocol: Select the protocol (TCP, UDP, or ICMP) that can be used to access the application. Port Range: Type the port range that can be used to access the application in the text boxes. Incoming: Defines which incoming communications users are permitted to connect with. Protocol: Select the protocol (TCP, UDP, or ICMP) that can be used by the incoming communication. Port: Type the port number that can be used for the incoming communication.
Add: Click to add the special application profile to the table at the bottom of the screen. Update: Click to update information for the special application if user have selected a list item and have made changes. Delete: Select a list item and click Delete to remove the item from the list. Cancel: Click Cancel button to erase all fields and enter new information. DMZ This screen enables users to create a DMZ for those computers that cannot access Internet applications properly through the WLAN Router and associated security settings. Note: Any clients added to the DMZ exposes the clients to security risks such as viruses and unauthorized access.

Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Note: AC/DC Power Adapter, Cooling Fan, Cable, and Power Supply carry 1-Year Warranty

TEW-632BRP

Wireless N Home Router
The Wireless N Home Router delivers the highest level of security, 12x the speed and 4x the range of wireless g products. Install the product in minutes with Easy-Go installation and seamlessly stream live media, download files, play games and talk Online all at the same time and with no wireless lag. The latest in wireless encryption and a secure firewall provide the ultimate in wired and wireless security. Advanced MIMO antenna technology delivers superior range and eliminates dead spots. A quick and intuitive installation process, remote man-agement capabilities and a 3-year warranty make this product well suited for your most demanding networking needs.

FEATURES

Wi-Fi compliant with IEEE 802.11n (draft 2.0) and IEEE 802.11b/g standards 4 x 10/100Mbps Auto-MDIX LAN port and 1 x 10/100Mbps WAN port (Internet) Supports Cable/DSL modems with Dynamic IP, Static IP, PPPoE, PPTP, L2TP & BigPond connection types High-speed up to 300Mbps data rate using IEEE 802.11n connection 2 external antennas support high speed performance and great coverage with MIMO technology Firewall features Network Address Translation (NAT) Support Wi-Fi Protected Setup (WPS) for easy connection Universal Plug and Play (UPnP) and Application Level Gateway support for internet applications such as email, FTP, gaming, remote desktop, Net Meeting, telnet and more Provides additional security of enable/disable wireless SSID, Internet Access Control (MAC Address, Domain & IP Filtering) Easy management via web browser and remote management Supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK Works with Windows 95/98/NT/2000/XP/2003 Server/Vista, Linux and Mac OS Coverage up to 100 meters (330ft.) indoor;(depends on the environment) Coverage up to 300 meters (980ft.) outdoor;(depends on the environment) 3- year warranty

rev:09.13.2007

SPECIFICATIONS Hardware
Standards WAN LAN WPS Button Connection Type UPnP DMZ DNS Internet Access Control Logging LED Indicator Power Adapter Power Consumption Dimensions (LxWxH) Weight Temperature Humidity Emissions Wired: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX) Wireless: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) 1 x 10/100Mbps Auto-MDIX port (internet) 4 x 10/100Mbps Auto-MDIX ports WPS configuration Dynamic IP, Static (Fixed) IP, PPPoE, PPTP, L2TP, BigPond UPnP IGD 1.0 Compliant DMZ host & Virtual Servers Static or WAN assigned DNS servers; 3 verified services for DDNS MAC Address Filter, Domain/URL Filter, Protocol/IP Filter 5 types event logging Email report logging report Power, LAN1~LAN4, WAN, WLAN 5V DC, 2.5A external power adapter 7W 195 x 120 x 30 mm (7.7 x 4.7 x 1.1 inches) 335g (11.8oz) Operating: 0 ~ 40 C (32 ~ 104 F) Storage: -20 ~ 60 C (-4 ~ 140 F) Max. 90% (Non-Condensing) CE, FCC 2412~2484MHz ISM band 2 x 2dBi fixed dipole antenna CSMA/CA with ACK 802.11b: 11Mbps, 5.5Mbps, 2Mbps, and 1Mbps Data Rate 802.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps and 6Mbps 802.11n (draft 2.0) : up to 300Mbps WEP(HEX/ASCII): 64/128-bit Security WPA(AES/TKIP): WPA/WPA2, WPA-PSK/WPA2-PSK Enable/Disable SSID 802.11b: 17dBm (typical) Output Power 802.11g: 13dBm (typical) 802.11n: 13dBm (typical) 802.11b: -85dBm (typical) @ 11Mpbs Receiving Sensitivity Channels 802.11g: -68dBm (typical) @ 54Mbps 802.11n: -62dBm (typical) @ 300Mbps 1~11 (US), 1~13 (EU)

Wireless

Frequency Antenna Media Access Protocol
NETWORKING SOLUTIONS PACKAGE CONTENTS
TEW-632BRP Multi-language quick installation guide Easy-Go installation CD-ROM Power Adapter (5V DC, 2.5A) 1.5 meters (5 ft) Cat. 5 Ethernet cable

(TEW-632BRP)

RELATED PRODUCTS
TEW-621PC TEW-623PI TEW-624UB
300Mbps Wireless N-Draft PC Card 300Mbps Wireless N-Draft PCI Adapter 300Mbps Wireless N USB 2.0 Adapter 300Mbps Wireless N-Draft Access Point

TEW-630APB

300Mbps, share multimedia throughout the house

ORDERING INFORMATION

20675 Manhattan Place,Torrance, CA 90501 USA Tel: 1-310-961-5500 Fax: 1-310-961-5511 Web: www.trendnet.com Email: sales@trendnet.com

To Order Please Call:

1-888-326-6061
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright TRENDnet. All Rights Reserved.