REFERENCE MANUAL

2000 Alesis

Alesis airFX Reference Manual Copyright 2000, Alesis Studio Electronics. All rights reserved. Reproduction in whole or in part is prohibited. airFX and Axyz are trademarks of Alesis Studio Electronics, Inc. Axyz technology is patent pending.
ALESIS CONTACT INFORMATION

E-Mail: Website:

support@alesis.com http://www.alesis.com

AIRFX REFERENCE MANUAL

CONTENTS
Important Safety Instructions.. 5
Safety symbols used in this product...5 Instructions de Scurit Importantes (French)...7 Beim Benutzen dieses Produktes beachten Sie bitte die folgenden Sicherheitshinweise: (German)...9 CE Declaration of Conformity....10 INSTRUCTIONS TO THE USER (FCC compliance)...11

Quick Start Guide... 13

Step 1: Hook it up....13 Step 2: Select a Program...13 Step 3: Have fun....13

Connections... 15

Unpacking and Inspection....15 Basic Connections....15 Connecting between a CD Player and a Stereo Receiver..16 Connecting into a DJ System..17 Mounting on a Microphone Stand...18 Connecting to a Synthesizer..19 Connecting to a Studio Mixer...20 Mono Operation....20

Performance... 21

Selecting a Program...21 Using the Axyz Controller...22 Effect Hold....23 Effect Bypass....24

Troubleshooting... 25

Troubleshooting Index....25 Care and Maintenance....26 Cleaning....26 Obtaining Repair Service....26
Program Chart... 28 Specifications... 33 Alesis Limited Warranty... 34
Introduction/Safety Instructions

Introduction

Thank you for purchasing this Alesis airFX. To take full advantage of this processors functions, and to enjoy long and trouble-free use, please read this users manual carefully.

How to Use This Manual

This manual is divided into the following sections describing the various functions and applications for the airFX. Though we recommend you take time to read through the entire manual once carefully, those having general knowledge about signal processors should use the table of contents to look up specific functions. Chapter 1: Quick Start. If you want to start using the airFX right away, heres a one-page guide to hooking it up and trying it out with a CD player. Chapter 2: Connections. This chapter gives detailed instructions for connecting the airFX to a variety of typical sound systems. Chapter 3: Performance. This section explains how to select programs, use the Axyz Controller, and use the Hold and Bypass functions. Chapter 4: Troubleshooting. This chapter contains troubleshooting tips and service information should problems occur.
When something important appears in the manual, an icon (like the one on the left) will appear in the left margin. This symbol indicates that this information is vital when operating the airFX.
IMPORTANT SAFETY INSTRUCTIONS
Safety symbols used in this product
This symbol alerts the user that there are important operating and maintenance instructions in the literature accompanying this unit.
This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks.
This symbol warns the user that output connectors contain voltages that can cause dangerous electrical shock.
Please follow these precautions when using this product:
1. Read these instructions.
2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. Do not spray any liquid cleaner onto the faceplate, as this may damage the front panel controls or cause a dangerous condition. 7. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments or accessories specified by the manufacturer.
12. Use only with a cart, stand, bracket, or table designed for use with professional audio or music equipment. In any installation, make sure that injury or damage will not result from cables pulling on the apparatus and its mounting. If a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. This unit produces heat when operated normally. Operate in a wellventilated area with at least six inches of clearance from peripheral equipment. 16. This product, in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist.

This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the users authority to operate this equipment.

FRONT PANEL

Axyz Controller

Program Knob

LED Display

REAR PANEL

RCA Outputs

RCA Inputs

Power Jack
Chapter 1: Quick Start Guide

CHAPTER 1

QUICK START GUIDE
This page gives you brief instructions so that you can start using the airFX right away. If you have questions about any of the steps, dont worry the following chapters will expand on these instructions with mind-numbing detail.

Step 1: Hook it up

Pull the airFX out of the package, and plug it into the wall with the supplied Power Supply. Connect the Left and Right output of a CD player into the Left and Right inputs of the airFX. Connect the Left and Right outputs of the airFX into the Left and Right CD Inputs of a stereo receiver. Select CD as the input on the receiver.
NOTE: If your system looks different from this one, skip ahead to Chapter 2, Connections.

Step 2: Select a Program

Turn the Program Select knob and select a Program between 00 and 49. When youve found one you like, press the knob down to select it. There is a list of program names printed on the bottom of the unit.

Step 3: Have fun

Press play on your CD player, and move your hand over the black Axyz dome on the unit. Try moving from side to side, front to back, as well as up and down. Get down!
Quick Start Guide: Chapter 1

Chapter 2: Connections

CHAPTER 2

CONNECTIONS

Unpacking and Inspection
Your Alesis airFX was carefully packed at the factory, and the shipping carton was designed to protect the unit during shipping. Please retain this container in the highly unlikely event that you need to return your processor for servicing. The shipping carton should contain the following items: airFX Processor Two stereo phono-to-phono cables This instruction manual Program Chart Power Supply, Alesis model P3 Alesis Warranty card

It is important to register your purchase; if you have not already filled out your warranty card and mailed it back to Alesis, please take the time to do so now.

Basic Connections

The airFX is designed to function with a wide range of equipment, from CD players to musical instruments. The only requirement is that the input and output be line level (for the technically minded, unbalanced -10 dBu).
This means that you never want to plug the powered output of an amplifier or receiver into the airFX. These speaker-level voltages will fry the electronics inside of the airFX. The systems on the next few pages will give you some examples of typical systems where the airFX is used. If you cant apply one of these systems to your own setup, contact Alesis or your dealer for assistance.

Connections: Chapter 2

Connecting between a CD Player and a Stereo Receiver
The above system allows you to hear the effect of the airFX on a CD through any stereo system. Using one of the supplied stereo RCA (phono) cables, plug the Left and Right outputs of your CD player into the Left and Right Inputs of the airFX. Usually, the white connector is connected to the left side and the red connector is connected to the right side. Next, using the other stereo RCA cable, plug the Left and Right outputs of the airFX into the Left and Right CD inputs of your receiver. (Actually, any unused inputs on the receiver should work except for Phono or Record Player.) This hookup method also works with self-powered speaker systems instead of a stereo receiver. If the CD doesn't have line-level RCA outputs: The instructions above are fine for home or professional CD Players. However, most portable CD players dont have a pair of RCA outputs like component CD players do. Instead, they have a 1/8 Mini jack. This is usually labeled Line Out. If your CD Player doesnt have a Line Out, then use the Headphone output and set the Volume to about 80% or less to avoid distorting the airFX. Many portable CD players include a cable with a 1/8 mini jack on one side and a pair of RCA connectors on the other. You will need to locate or purchase this cable to use a portable CD player with the airFX. Plug the RCA connectors on this cable into the Left and Right Inputs of the airFX. You should be able to use these instructions to connect a game console, DVD player or video camera through the airFX.

Although the speaker outputs of many compact stereo systems use an RCA connector between the main outputs and the speakers, speaker level voltages like these will distort and possibly damage the airFX.
Connecting into a DJ System
This section explains how to connect the airFX into a DJ system. The first point to mention is that the output of a turntable is not at line level. Therefore, unlike a CD player, you cant just connect the output of the turntable into the airFX. You need to connect the turntable to a phono preamp, then connect this output to the airFX. In a DJ system, the preamp is usually built into a mixer. In the diagram above, we first connect the two turntables into the mixer. We then plug the Left and Right outputs of the mixer into the airFX, making sure that these are not speaker level outputs. Next, plug the Left and Right outputs of the airFX into the Left and Right inputs of your power amplifier.
If your amplifier is built into the mixer, make sure you dont plug those speaker-level outputs into the inputs of the airFX. The voltage levels needed to drive large DJ speakers will distort and possibly damage the airFX. If the amplifier is built into the mixer, there may be a main insert in the mixer, designed for an EQ. If so, plug the Left and Right Insert Sends into the inputs of the airFX and the Left and Right outputs of the airFX into the Insert Returns. With the setups above, you will hear the effect of the airFX on everything that comes out of your mixer. If you have a separate preamp for your turntable, or if you are using a CD player, you may
want to connect the airFX to one of the inputs to your mixer while the other plays unaffected. To do this, connect the outputs of your preamp or CD player into the inputs of the airFX. Then connect the outputs of the airFX into the inputs of your mixer. Now you can mix between the effected mix from one source to the uneffected source on another.
Mounting on a Microphone Stand
The bottom of the airFX features a threaded socket for a standard microphone stand. This allows the unit to be mounted away from the area where the other equipment is, so that unintended movements won't be picked up by the Axyz controller. When mounting on a stand, avoid tipover by: Using a stand with a heavy base Tying the input, output and power cables to the stand in several places, especially near the base (so if someone pulls on the cord, it pulls on the base) Using cords that are long enough
Connecting to a Synthesizer
The airFX can add great filter effects to a synthesizer. In the diagram above, we demonstrate how the Left and Right outputs of the synthesizer are connected to the inputs of the airFX, then the stereo outputs of the airFX are connected to two inputs of a mixer. The outputs of a synthesizer are usually 1/4 jacks, which means that youll need to purchase an adapter cable to use the airFX. The best choice is a cable with RCA (phono) jacks on one side and 1/4 jacks on the other. Your Alesis dealer will almost certainly carry these cables.

Connecting to a Studio Mixer
The best method of connecting the airFX to a mixing console or multitracker is to use the channel inserts. Youll need two "insert splitter" cables with a TRS stereo 1/4 connector on one side splitting to two RCA connectors on the other. (Note: this is NOT a "Y" cord; the ring is connected to one RCA and the tip to the other.) Insert the 1/4 stereo plug into the mixers channel insert, connect the send plug to the airFXs Input and the return to the airFXs output. You can also use the main inserts, if your mixer has them, to use the airFX on the entire mix, or on a group insert if you want to effect multiple channels at once but not the entire mix. Aux send/return: Note that in most cases, you won't connect the airFX to an effects send and return of a mixer, the way that many reverbs or other effect devices are. This is because when the effect is off, the airFX still sends the "dry" signal to its outputs. This may cause phase cancellation or other unwanted effects if the aux return is mixed back with the original.

Mono Operation

If your source does not have stereo outputs, you can use only one side of the airFX. Plug the mono output of your source into the Left input of the airFX, then connect the Left output of the airFX to the destination. If the destination is stereo, you may need a Y-cable to split the one RCA jack into two RCA jacks.

Chapter 3: Performance

CHAPTER 3

PERFORMANCE

Selecting a Program
The Alesis airFX contains 50 programs for adding a variety of new effects to the incoming signal. There is a list of program names printed on the bottom of the unit, and you should have received a program chart with the unit that describes each program. Selecting a new program is simple: 1. Turn the program knob on the bottom left side of the airFX to select a program number. The new program will not load right away, allowing you to keep using one program while you find another.
Notice that there is a decimal point after the program number to indicate that it hasnt been loaded yet. 2. Briefly press the Program knob to load this new program.
The decimal point goes away, showing that the program has been loaded.

Performance: Chapter 3

Using the Axyz Controller
The airFX is the first Alesis product to use the groundbreaking Axyz controller. This controller allows you to use your hand to control the sound of your music in a way never before possible. The Axyz controller works by sending a beam of invisible infrared light out of the top of the unit. There are sensors all around the dome which see the light when it is reflected back. By moving your hand around the dome, you reflect the light to different sensors, and this changes the sound of the effect. There are three sets of sensors in the Axyz controller, they are known as the X-axis, Y-axis, and Z-axis. The X-axis sensor reads your hand position from left to right. The Y-axis sensor reads your hand position from the front to the back of the unit. The Z-axis sensor reads how close your hand is to the sensor (up and down). Tip: When playing the airFX, make sure to move your hand in all three directions. Some of the programs dont use the Y-axis, but most use all three. You should hear an effect when your hand gets within 6 (15 cm) of the Axyz controller. For a list of what each axis does to the sound, see the Program Chart which came with your unit. Note that ambient light can affect the sensitivity of the Axyz controller. Make sure that you dont sit the airFX right next to a light source or in the sun, or you may notice that you need to move your hand closer to hear an effect. You may also notice this if a large light is pointed directly at the airFX when you are on stage.

Effect Hold

The airFX has a function that allows you to freeze the current effect from the airFX without needing to hold your hand in place. This function is called Hold. To use the Hold function: 1. Recall a program as described in the previous section. There should be no decimal points showing in the display.
Note that there are no decimal points in the display, showing that the effect is loaded and operational. 2. Move your hand around the Axyz controller, stopping your hand position when you find an effect that you want to freeze. 3. Press and hold the Program knob for about one second. A decimal point should appear in the display between the first and second number of the program.
A decimal point has appeared between the first and second digits of the program number, showing that the Hold function is set. 4. Move your hand away from the Axyz controller. Notice that the effect continues as if your hand was still there. 5. To turn off the hold function and resume normal operation, press the Program knob one more time. The decimal point should go away and you can use the Axyz controller again to modify the sound.

Effect Bypass

The effect Hold function can also be used as a Bypass. This function turns off the Axyz controller so that the effect is not accidentally triggered. To use the Bypass function: 1. Recall a program as described in the previous section. There should be no decimal points showing in the display.
Note that there are no decimal points in the display, showing that the effect is loaded and operational. 2. Move your hand away from the Axyz controller, making sure that the airFX isnt affecting the sound. 3. Press and hold the Program knob for one second. A decimal point should appear in the display between the first and second number of the program.
A decimal point has appeared between the first and second digits of the program number, showing that the Bypass/Hold function is set. 4. The Axyz controller should now have no effect, so moving your hand towards the Axyz dome should not change the sound. 5. To turn off the hold function and resume normal operation, press the Program knob one more time. The decimal point should go away and you can use the Axyz controller again to modify the sound.
Chapter 4: Troubleshooting

CHAPTER 4

TROUBLESHOOTING

Troubleshooting Index

If you experience problems while operating your airFX, please use the following table to locate possible causes and solutions before contacting Alesis Product Support for assistance. Symptom No audio from outputs Solution Try one of the programs that dont require input (#42-49) or check the source. Bad cables Replace the cables. Destination is turned Check the connections down and the level of the mixer or amp that the airFX is connected to. Power is not Time for a coffee connected break. Cables are crossing a Make sure that the power cable airFX and its audio cables are kept away from power cables, other power transformers and wall warts. Bad cables Replace the cable with a new, high-quality cable. Problem with the Try bypassing the source airFX by connecting the input cables to the output cables and see if the problem remains. Cause No input audio

Buzz from outputs

Troubleshooting
Symptom Axyz controller is not as sensitive as it should be
Cause Solution Infrared interference Shade the airFX from (rare) IR sources. Too much interference from smoke If a fog machine or cigarette smoke is nearby, try moving the airFX. Unplug the airFX and plug it back in If there is a decimal point between the numbers, hold the Program knob until it goes away. Try moving your hand closer to the sensor or switching to a different program.
Cant change programs No effect
Software problem Hold feature is turned on
Not close enough to the Axyz sensor, effect too subtle

Care and Maintenance

Cleaning
Disconnect the AC cord, then use a damp cloth to clean the airFXs metal and plastic surfaces. For heavy dirt, use a non-abrasive household cleaner such as Formula 409 or Fantastik. DO NOT SPRAY THE CLEANER DIRECTLY ONTO THE FRONT OF THE UNIT AS IT MAY DESTROY THE LUBRICANTS USED IN THE SWITCHES AND CONTROLS! Spray onto a cloth, then use cloth to clean the unit.
Refer All Servicing to Alesis
We believe that the airFX is one of the best processors that can be made using current technology, and should provide years of trouble-free use. However, should problems occur, DO NOT attempt to service the unit yourself. Service on this product should be performed only by qualified technicians. NO USER-SERVICEABLE PARTS INSIDE.

Obtaining Repair Service

Before contacting Alesis, check over all your connections, and make sure youve read the manual. Customers in the USA and Canada: If the problem persists, contact Alesis and request the Product Support department. Make sure you have the units serial number with you. Talk the 26
problem over with one of our technicians; if necessary, you will be given a return order (RO) number and instructions on how to return the unit. All units must be shipped prepaid and COD shipments will not be accepted. For prompt service, indicate the RO number on the shipping label. Units without an RO will not be accepted. If you do not have the original packing, ship the unit in a sturdy carton, with shock-absorbing materials such as Styrofoam pellets (the kind without CFCs, please) or bubble-pack surrounding the unit. Shipping damage caused by inadequate packing is not covered by the Alesis warranty. Tape a note to the top of the unit describing the problem, include your name and a phone number where Alesis can contact you if necessary, as well as instructions on where you want the product returned. Alesis will pay for standard one-way shipping back to you on any repair covered under the terms of this warranty. Next day service is available for a surcharge. Field repairs are not authorized during the warranty period, and repair attempts by unqualified personnel may invalidate the warranty.

Customers outside the USA and Canada: Contact your local Alesis distributor for any warranty assistance. The Alesis Limited Warranty applies only to products sold to users in the USA and Canada. Customers outside of the USA and Canada are not covered by this Limited Warranty and may or may not be covered by an independent distributor warranty in the country of sale. Do not return products to the factory unless you have been given specific instructions to do so. Internet Address: Important information and advice is available on our web site: http://www.alesis.com Email may be addressed to: Support@alesis.com

Program Chart

PROGRAM CHART

Special FX 1

# Program Name Description X Axis Synth Pitch Y Axis Z Axis Mix Mix Scratches Mix Mix Distortion Amount Mix Mix Mix 0 Pitch Out Like holding your finger on a record player, slows it down then stops the music 1 Lord of the A vocoder effect that fades Flies between noise and synth tones 2 Vinylizer Feed your tunes through this scratchy record player 3 Percolator Your music bubbles to the surface through bandpass filter peaks 4 Frankenstein's Random tones to accompany Lab your next experiment 5 Overdrive Makes your CD player sound like it's been thrown out of a moving bus 6 Kenneth's Like it's being beamed from Frequency the killer satellites that follow you around 7 Horror Show Ultra-fast vibrato for creepy effects 8 Decimator Digital distortion that sounds like you're chewing on sand 9 SunSpot Smoother, filtered distortion sounds great on drums
Synth/ Noise Balance Bandwidth Noise Pitch Range Pitch Range High Cut Filter Speed Speed Low Cut Filter
Ring Mod Speed FM Speed FM Depth Alias Filter Sample Rate
Lowpass Resonance Bit Frequency Reducer
The X-axis sensor reads your hand position from left to right. The Y-axis sensor reads your hand position from the front to the back of the unit. The Z-axis sensor reads how close your hand is to the sensor (up and down).

Filters

# Program Name Description Tight filter, great for thinning out the mix Six-pole lowpass filter, perfect for synths and bass Highpass filter, sucks all the bass out for icy sweeps The Lowpass LFO Filter wags in time with the music Like #13, but with a highpass filter for a thinner sound This "wah" is triggered by the music level X Axis Y Axis Z Axis 10 Telephone 11 Big Bottom 12 Snake Bite 13 Bow Wow 14 Smoke 15 AutoWah 16 Formented Frequency Bandwidth Mix Frequency Resonance Mix Frequency Resonance Mix Frequency Resonance LFO Rate Frequency Resonance LFO Rate Frequency Adds tempo control Mouth Mouth position position Mix

Mix Sounds like the music is coming out of someones mouth, great on a full mix Frequency Frequency Mix 17 Streetsweeper Crazy filters that change frequency and panning when you wave right to left 18 Orlyfilter Beat-synced random filter Frequency Resonance Tempo keeps time with the music 19 Killswitch Notch filter adds a narrow Frequency Notch Mix sweep to the mix Width

Flange/Phase

# Program Name Description X Axis Y Axis Z Axis Mix Mix Mix Mix 20 Tokyo Phase Phaser with positive feedback, like wasabi for guitars 21 Phasors on Other-worldly phasor with Stun negative feedback 22 Liquid Metal 25-band phase shifter for amazing metallic stereo effects 23 Spin Cycle Rubbery stereo phasor that plays in time with the music 24 Psychofaze Trippy stereo phasor makes you see helicopters 25 AutoFaze Phase pulsates based on the level of the music, give it a heavy beat to play with 26 Ghost Flange Deep flanger kicks you back to the '70s 27 Satellite Oscillating flanger, cool on pads and drums 28 Fazed Out Both a phasor and a flanger, for when a sound must be completely obliterated 29 Forever Barber-pole flanger that Flange keeps going and going Frequency Feedback Frequency Feedback Frequency Feedback LFO Tempo Depth Depth Rate Phase Delay Flange slope Feedback
Resonance Mix Feedback Feedback Feedback Mix Delay Width
Flange Feedback Frequency Feedback Mix

Special FX 2

# Program Name Description Stuttering tremolo effect that keeps time with the music Nervous A tremolo effect, it rapidly changes the volume up and down Psychic Pan Autopanner in sync to the beat, too much makes the dancefloor get dizzy Kung-Fu Pan the music with your Panner hand - it doesn't get much cooler Stop it! Kill the music with a wave of the hand, try it with applause for an ego boost Freq It! Pitch shifter to change your voice or someone else's Pitch Pitch transposer goes up or Transporter down an octave. Munchkin power! Gender Another pitch transposer, Bender this one goes up or down 4 steps Waterbed Vibrato effect for everything from a subtle shake to a sickening wobble Spin the Bottle Rotating speaker effect, it makes the room spin Centrifuge Another rotating speaker, great for keyboards and guitars Bottom Feeder Bass synthesizer adds punch and mass to any mix X Axis Rate Panning Panning Y Axis Z Axis 30 Strobe Gate 41 Duty Cycle Tempo Rate Depth Mix Cut Depth Depth Radius
Pitch up/down Pitch up/down Pitch up/down Rate Speed Speed Speed -
High/Low Horn Crossover Radius

Synth Patches

# Program Name Description The sound of a record scratching. Chicka-chicka Haunted Spooky wind effects to keep Landscape you up nights Headhunter Talking drum, move your hand down faster for a louder sound Beatbox Boombox: kick on the right and clap on the left. Keep away from breakdancers Slap Synth Synth tone, move hand faster for a louder sound Jungle Rip Bass synth slide, faster "hit" gets a higher pitch War! Noise synth, watch the bullets fly Sci-Fi Theatre Spooky synth tone for 50's Sci-Fi movies X Axis Y Axis Z Axis Scratch 42 Skratch! 49

Frequency Resonance Mix Pitch Decay Volume Volume Cutoff Pitch
Kick/Clap Decay Pitch Decay

Waveshape Decay

Lowpass Decay Volume Frequency Pitch Waveshape Volume

Specifications

SPECIFICATIONS
I/O: Nominal Input Voltage: Max Input Voltage: Dynamic Range: Signal to Noise Ratio: THD+N: Frequency Response: Sampling Frequency: Converter Resolution: Processor Resolution: Stereo RCA in and out -10dBu 11.96dBu (4.34Vpp) 102.8 dB (A-weighted) -102.4dB (A-weighted) 0.0065% 20-20000Hz +0/-2.0 dB 44.1KHz 24bit (ADC and DAC) 28bit
All measurements done over a 20Hz-22,000Hz range with 1KHz sine wave at Full Scale, except for the dynamic range which was done with a -60dBFS 1KHz sine wave.

Warranty

ALESIS LIMITED WARRANTY
ALESIS CORPORATION ("ALESIS") warrants this product to be free of defects in material and workmanship for a period of one (1) year for parts and for a period of one (1) year for labor from the date of original retail purchase. This warranty is enforceable only by the original retail purchaser and cannot be transferred or assigned. The purchaser should complete and return the enclosed warranty card within 14 days of purchase. During the warranty period ALESIS shall, at its sole and absolute option, either repair or replace free of charge any product that proves to be defective on inspection by ALESIS or its authorized service representative. In all cases disputes concerning this warranty shall be resolved as prescribed by law. To obtain warranty service, the purchaser must first call or write ALESIS at the address and telephone number printed below to obtain a Return Authorization Number and instructions concerning where to return the unit for service. All inquiries must be accompanied by a description of the problem. All authorized returns must be sent to ALESIS or an authorized ALESIS repair facility postage prepaid, insured and properly packaged. Proof of purchase must be presented in the form of a bill of sale, canceled check or some other positive proof that the product is within the warranty period. ALESIS reserves the right to update any unit returned for repair. ALESIS reserves the right to change or improve design of the product at any time without prior notice. This warranty does not cover claims for damage due to abuse, neglect, alteration or attempted repair by unauthorized personnel, and is limited to failures arising during normal use that are due to defects in material or workmanship in the product. THE ABOVE WARRANTIES ARE IN LIEU OF ANY OTHER WARRANTIES OR REPRESENTATIONS WHETHER EXPRESS OR IMPLIED OR OTHERWISE, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY EXCLUDE ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY OR OTHER IMPLIED WARRANTIES. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. IN NO EVENT WILL ALESIS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT OR OTHER DAMAGES RESULTING FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING, AMONG OTHER THINGS, DAMAGE TO PROPERTY, DAMAGE BASED ON INCONVENIENCE OR ON LOSS OF USE OF THE PRODUCT, AND, TO THE EXTENT PERMITTED BY LAW, DAMAGES FOR PERSONAL INJURY. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THIS CONTRACT SHALL BE GOVERNED BY THE INTERNAL LAWS OF THE STATE OF CALIFORNIA WITHOUT REFERENCE TO CONFLICTS OF LAWS. This warranty gives you specific legal rights, and you may also have other rights required by law which vary from state to state. This warranty only applies to products sold to purchasers in the United States of America or Canada. The terms of this warranty and any obligations of Alesis under this warranty shall apply only within the country of sale. Without limiting the foregoing, repairs under this warranty shall be made only by a duly authorized Alesis service representative in the country of sale. For warranty information in all other countries please refer to your local distributor.

REGISTER YOUR PRODUCT ONLINE AT www.alesis.com
2000 Alesis Corporation Specifications Subject To Change Without Notice 7-51-0095 B

Equipment Liste 12/2010 Equipment A-Regie DAW: 1 x Mac Pro 8 Core / 12 GB Ram / 3 TB SATA HD 2 x Philips 20 Widescreen TFT/ DVI 2 x Acer 19TFT / DVI 1 x TC Electronics Powercore Firewire 1x Motu PCI 424 / Motu PCI Express x Motu x Motu 2408 Mk II 1 x Motu x Emagic amt 8 Midi Interface HD Recording Software: Logic Studio ProTools 9 Waveburner Steinberg Cubase Yamaha Studio Manager (for DM2000 V2) Bias Peak Pro (for Mastering) Plugins: Waves, Powercore, etc Software Instruments: Spectrasonics Mixing Desk: Yamaha DM 2000 V2 Extension Cards: 8 x Adat optical i/O-4 x MY16 Inputs: 96 (72 over Adat / 24 XLR) Outputs: 88 (72 over Adat / 16 Analog) digital Desk with Total Recall and DAW Remote Monitoring: 2 x Genelec 1037 Active 3 Way System 116 dB SPL 1 x Genelec 7071A 118 dB SPL 2 x Alesis Point Seven Neareld 2 x Yamaha NS-40M Studio Neareld Outboard: 2 x Mindprint DTC (Digital AES/EBU- 24bit/96kHz) 1 x Mindprint En Voice (Digital SP-dif 24bit/48kHz) 2 x Drawmer DL 241 Dual Compressor-Limiter TC Finalizer PLUS Akai S6000 / 128 MB (ZIP & 36GB SCSI HD) div. FX Outboard DDrum 3 inkl. all Extensions & Triggers / Pads Technics MKII Sony DTC-55ES DAT Sony MDS-503 MD Sony TC-K615STape Technics SL PG-4 CD Equipment B-Regie DAW: Apple iMac 24Interl Core 2 Duo 2.8 GHz Frontier Design Alphatrack Kensington Expert Mouse Motu 828 MKII Motu Midi Timepiece MTPAV Emagic Amt 8
HD Recording Software: Logic Studio Ableton Live Propellerhead Record, Reason Steinberg Cubase Mixing: DAW Direct Out Samson PL2404 Mackie LM3204 Mackie 1604 Mackie 1204 Phonic Studio Wizard Crystal Phasematic KENT SA31 Monitoring: 2 x Fostex NX-6A Outboard:
Lexicon PCM80 DigiTech Quad4 Alesis Quadraverb2 Alesis AirFX TC PowerCore Firewire Focusrite Liquidmix Korg! KaossPad2 Korg! Mini KP Boss!Voice Transformer ART! Tube Channel Midi Controller: M-Audio Trigger Finger Novation Zero SLMK2 Novation Remote42 Novation Launchpad Frontier Alphatrack Korg! NanoControl
SONICLAB Equipment 2010 - 1 / 2
Equipment Recording Room Mics: Neumann U87 Neumann TLM 103 Rhode NTK Tube 10 x Shure SM x Shure SMx Shure Betax Shure SM x Shure Beta 56A 3 x AKG Cx EV REx Behringer B-x Behringer B-x Ribbon Mic The T.Bone RBx MXL Vx MXL 603 (matched pair) 2 x MXL x MXL V69 Mogami Edition 7 x Beyerdynamic OPUS 88 Drums: DW Drum complete with Hardware (10/12/14/16/22) Sonor Hi-Lite Exclusive Hardware Sonor Hi-Lite Exclusive Snaredrum Ludwig Black Beauty Snaredrum 13 Brady Snaredrum 12 Paiste Signature Cymbals (12+13+14HH/10/12/14/16/18/20) Paiste 2002 Cymbals (Soundedge HiHat) Paiste 3000 Cymbals Istanbul Cymbals Percussion (Shakers, Tambourines,.) Amps: Guitaramp Line6 Flextone II 60 Watts Guitaramp Behringer ACX 1000 Ultracoustic Park G10R Bassamp AMP 250 Watt Dual Channel Bass Amplier Bass Cabinet Hardke XL Series 210 Module Bass Cabinet Hardke XL Series 115 Bass Module Guitars: Takamine EF261S Acoustic Guitar, iAXE393 E-Guitar NoName Bass Guitar Synths / Instruments:
Clavia Nordlead Roland JP8000 Roland SJV1080 Korg! Electribe ER-1 Korg! M1 Korg! Kaosszilator Access Virus Indigo Boss! SP505 Novation Bass-Station Novation Drum-Station Novation SuperNova 2 Jomox AirBase99

Akai S6000

SONICLAB Equipment 2010 - 2 / 2