Series

Super Gr.N 1/7 May 2007

Mitsubishi Lancer Evo X

TECHNICAL BULETIN

Data Subject: System technical details
Introduction The aim of this document is to inform the Super group N distributors and the users about the system features and components. In brief the only major components carried over from the Evo 9 is the front calliper and the pads.
Contents Front tarmac kit Front gravel kit Rear tarmac & gravel kit
Monobloc Calipers Front & Rear technical details P4 38/44 Aluminium forged mono-bloc caliper. Front left p/n XA5T0.03 Front right p/n XA5T0.04
P4 26/30 Aluminium forged mono-bloc caliper Rear left p/n XA7G0.11 Rear right p/n XA7G0.12
Pads Brembo recommend the use of Brembo RB170 pads.
Discs technical details Front Tarmac Cast iron disc 355X32 Front Gravel Cast iron disc 300X32 Rear Cast iron disc 295X25,4 47,5mm annulus 48 Vanes with Brembo logo 52mm annulus 48 Vanes with Brembo logo 64mm annulus 72 Vanes with Brembo logo
Brackets technical details Front Aluminium alloy with hard anodizing and heli-coil
P.S. The discs inside the kits are already assembled with the specific bells

Super Gr.N 2/7 May 2007

Data Caliper service The recommended working temperature for the Super Gr.N caliper is <200C, whereas the maximum acceptable working temperature is 220C. Over 240C the seals fitted into caliper can be overheated and they will not guarantee the right performances of the caliper (sealing, roll back, fluid absorption,). In order to keep under control the caliper temperature Brembo suggests to use its thermo-tape: scale 132C/210C scale 210C/260C p/n 025168.10 p/n 025168.13
If the caliper temperature goes over 240C the seals have to be opportunely refreshed.
After 1000km of special stage the caliper has to be serviced changing the following components:
1. pistons 2. seals 3. pad abutments 4. bleed screws 5. bridge pipe (if needed) Conversion Tarmac Gravel and vice versa In order to concert a Tarmac kit in a gravel kit it is necessary to change the front brackets and the front disc-bell assemblies. The calipers are the same.

Service kit

Super Gr.N 3/7 May 2007

Pads shape

Front tarmac pad shape Front gravel pad shape
Rear tarmac & gravel Pad shape
P.S. Pads are not included in the Brembo kit

Super Gr.N 4/7 May 2007

Kit Parts list:
XA7G0XX XA5T003/04 XA7G031/32 XA7G042 09930631/41 XA7G05582923 A31201120 A34110014 TARMAC CALIPER ASSEMBLY BRACKET DISC BELL BRACKET SCREW CALIPER SCREW BRACKET SCREW WASHER CALIPER SCREW WASHER 1+1 1+1+4 4
XA7G0YY XA5T003/04 XA7G021/22 XA7G043 09864713/23 XA7G05582923 A31201120 A34110014
GRAVEL CALIPER ASSEMBLY BRACKET DISC BELL BRACKET SCREW CALIPER SCREW BRACKET SCREW WASHER CALIPER SCREW WASHER

1+1 1+1+4 4

XA7G0ZZ XA7G011/12 XA7G023/24 09727709/19 XA7G026 A16441298 A36211120
REAR CALIPER ASSEMBLY DISC BELL CALIPER SCREW CALIPER SCREW WASHER

1+1 1+1 1+4 4

Brembo recommended pads:
PART NUMBER B19.17.170 B18.17.170 B09.20.170 DESCRIPTION BREMBO PAD KIT BREMBO PAD KIT BREMBO PAD KIT TARMAC GRAVEL REAR

Super Gr.N 5/7 May 2007

Monobloc Caliper Front & rear
Front Brackets TarmacGravel
(no rear bracket on Evo X)

Super Gr.N 6/7 May 2007

Patented Discs Tarmac Gravel-Rear
Bells Tarmac Gravel - Rear

Super Gr.N 7/7 May 2007

Disc assembly Tarmac Gravel Rear
Tandem hand brake Master cylinder
Tandem master cylinder for hand brake is available in the followings Part Numbers and Sizes: X A7 B16mm X A7 B17mm X A7 B18mm