S SA-300 SA-1000 SD-1 + SH-201 SL-20 Sonic Cell Expandable Synth Module BKT-S Desktop Stand Sonic Cell SP-404 + SP-555 SPD-20 SPD-S SRX 01-12 * SS-PC1 Support Stand for PC ST-100MB Microphone Stand w. Bag SYB-5 T * TD-4 Module TD-9 Module TD-12 Module TD-20 Module TDM-1 Drum Mat HD-1 TDM-10 Drum Mat small (120x130cm) TDM-20 Drum Mat large (160x150cm) * TDW-20 Expansion Board TD-20 TMC-6 TR-2 TU-2 TU-12 * TU-12BW TU-12H * TU-12EX TU-15 TU-80 TU-80W * TU-88BK * TU-88WH * TU-1000 Drum Sets inclusive Stands + HD-1 V-Drum Lite * TD-4K TD-9K TD-9KX TD-9KS TD-12KV-BK black/white TD-20K-BK black/white

CHF 258 CHF 448 CHF 9990

V * V-Piano * KS-V8 Stand for V-Piano + V-Synth GT V-Synth XT V-Stand KS-V7 * VB-99 + VG-99 CB-VG9 Carrying Bag VG-99 + VH-11 VH-12 VK-8 VK-8M BKT-8 Holder for VK-8M VK-88 VP-550 * VP-770 Vokal & Ensemble Keyboard VS8F-3 Cables/Cords PJ-1M MSC-15 MSC-25 MSC-50 RS-232-9C PC-Cable 9 Pin PCS-20A PCS-10/18 PCS-31 2xJack/Stereo Jack PCS-31L 2xJack/Stereo Jack Stnder/stands KS-12 KS-88 Stand VK-88 KS-C190 Stand C-190 KS-V7 V-Stand KS-STV7 secondary tier KS-G8 KS-8STG KS-18Z KSC-44-BK/WH stand FP-4/7 * KS-V8 PDS-2 Stand RMP-3/5 PDS-10 Stand HPD/SPD series * SS-PC1 ST-100MB Microphone Stand RODGERS 538 MD/ML Melanique Dark/Light 538 WD/WL Wood Dark/Light Allegiant 778 3-manual MX-200
CHF 598 CHF 35 CHF CHF 1898
Gig-Bags/Cases/Dust Covers BA-CB3 Gig Bag GT-8/10/RC-50,BR-1200CD BA-M-BR Play Case Micro-BR BA-MBR-S Silicon Rubber Case BA-PC15 Earphone/Cable Set BCB-30 Case for 3 Compact Pedals BCB-60 Case for 6 Compact Effect Pedals CB-50 Carrying Bag for ME-50/B CB-CD2 Carrying Bag CD-2e CB-CS1 Gig Bag Cube Street * CB-GT Carrying Bag GT-10 CB-HPD-10 Carrying Bag for HPD/SPD-Series CB-KSV7 Carrying Bag for V-Stand * CB-MBC1 Carrying Bag for MB-Cube CB-MC808 Carrying Bag for MC-808 CB-RMP Carrying Bag for RMP-3/5 CB-SP1 Carrying Bag SP/Sonic Cell CB-VG9 Carrying Bag VG-99 SC-2 Soft Case CD-2 DIM-BAG 2 ohne Rollen/sans roulettes Juno-D/G, GW-7/8 DIM-BAG 3 Rollen/roulettes C-190, FP-4 DIM-BAG 4 Rollen/roulettes EXR-7s, FP-7 DIM-BAG 6 Rollen/roulettes Fantom G6 DIM-BAG 70 Rollen/roulettes E-50,E-60, ep880Fantom X/G7,G-70 DIM-BAG 150 Rollen/roulettes Juno Stage DIM-BAG 700 Rollen/roulettes RD-700/300GX/SX DIM-BAG 8 Rollen/roulettes Fantom G8 DIM-BAG 80 Rollen/roulettes E-80 * = Neuheiten/nouveaux produits/novit + = neuer Verkaufspreis/nouveau prix de vente/nuovo prezzo di vendita = auf Anfrage/sur demande/su domanda
Roland/Boss Generalvertretung fr die Schweiz und das Frstentum Liechtenstein: Roland/Boss Importation et Distribution pour la Suisse et le territoire du Liechtenstein: Roland/Boss Importatore per la Svizzera e Liechtenstein: Roland (Switzerland) AG Landstrasse 5, Postfach, 4452 Itingen Telefon 99 99, Fax info@rolandmusik.ch, www.rolandmusik.ch Roland (Switzerland) AG Service Center Roland Boss Rodgers Landstrasse 5, Postfach, 4452 Itingen Telefon 99 87, Fax service@rolandmusik.ch Verkauf ber den Roland Vertragshndler Vente par le distributeur spcialis Vendita nei negozi specializati Edirol Distribution by Roland (Switzerland) AG Landstrasse 5, Postfach, 4452 Itingen Telefon 99 97, Fax info@edirol, www.edirol.ch RODGERS Distribution Landstrasse 5, Postfach, 4452 Itingen Telefon 99 96, Fax www.rodgers.ch

CHF 318 318

Preisliste Februar 2009
Liste de prix Listino prezzi
Produkte, welche in diesem Katalog ab e det, jedoch g bil nicht in der Preisliste aufgefhrt wurden, sind nicht mehr lieferbar. Bitte fragen Sie Ihren Roland Fachhndler oder die Roland (Switzerland) AG nach den entsprechenden Ersatzmodellen. Diese Preisliste ersetzt alle vorgngigen. Modell- und Preisnderungen vorbehalen. Keine Haftung t fr Druckfehler. Alle Preisangaben verstehen sich in CHF pro Einzelstck, ausgenommen spezielle Ver erke. m Die Preise verstehen sich inkl. MwSt. Tous les produits qui sont illustrs dans ce catalogue, mais qui ne paraissent pas dans la liste de prix, ne sont plus d isponibles. Veuillez contacter votre revendeur oland R spcialis ou directement la maison Roland (Switzerland) AG pour onnaitre les modles de emplaement. Cette liste c r de prix remplace toutes les prcdentes. ous rserve de S modifications et changements de tarifs. Nous dgageont toute responsabilit pour fautes impression. d Toutes les indications de prix entendent en s CHF et par pice. Prix T.V.A. inclues. Prodotti dei quali sono illustrati in questo catalogo ma non risultano sul listino prezzi, non sono pi disponibile. Prego consultare la Roland Svizzera o rivalgersi presso i negozi specializati, Roland per eventuali novit. Questo listino prezzi rimpiazza tutti i precendenti. Cambiamento dei modelli e prezzi o errori di stampa sotto riserva. Tutti prezzi indicati sono per pezzo e incluso T.V.A.

Andere Modelle sowie Erweiterungen auf Anfrage Autres modlles sur demande.
* = Neuheiten/nouveaux produits/novit + = neuer Verkaufspreis/nouveau prix de vente/nuovo prezzo di vendita = auf Anfrage/sur demande/su domanda

Schweiz Suisse Svizzera

A * AAP-1 Accordion Package AB-2 AC-3 AC-60 AC-90 ACA-230G AD-3 AD-8 APC-33 + ARX-Series Expansion Board Fantom G + AT-75 AT-100 AT-300 AT-500 AT-800 Atelier Organ AT-900 incl. Pedalboard AT-900C AW-3 * AX-Synth B BA-CB3 BA-M-BR Play Case Micro-BR BA-PC15 BCB-30 BCB-60 BD-2 BF-3 BKT-8 Holder for Kit VK-8M BKT-S Desk Top Stand Sonic Cell BNC-88 Bench for VK-88 BR-600 BR-900CD Version 2.00 BR-1200CD BR-1600CD Micro-BR * BA-CS10 Stereo Mic for Micro BR BA-M-BR Play Case Micro-BR C + C-30 incl. Stand C-190 KS-C190 Stand for C-190 * CB-MBC1 Carrying Bag MOBILE CUBE * CD-01A USB CD Drive + CD-2e + CB-CD2e Carrying Bag CD-2e CE-5 CE-20 CEB-3 CH-1 CM-30 CS-3 + CS-15R Mic CD-2e CUBE-15X CUBE-20X
CHF 1598 CHF 58 CHF 198 298
CUBE-30X CUBE-60D * CUBE-80X CUBE-ST Cube Street black CUBE-ST-R Cube Street red CB-CS1 Gig Bag Cube Street CB-30 Bass Cube CB-100 Bass Cube Mobile-Cube CY-5 CY-8 CY-12R/C CY-14C CY-15R CYM-10 D D-Bass 210 D-Bass 115 D-Bass 115X DAP-1 (for HD-1) DAP-3 DB-30 DB-60 DB-90 DD-3 DD-7 DD-20 DN-2 DP-2 DP-10 DP-990-SB/MC DR-HS5 Headset Mic DR-30 DR-50 DR-80C DR-3 Dr. Rhythm DR-670 Dr. Rhythm DR-880 Dr. Rhythm DS-1 DS-2 DS-5 DS-7 DS-8 DT-HD1 Drum Tutor

10 CHF CHF 1698

F CHF + Fantom G+ Fantom G+ Fantom GFantom XR 2398 DM-512FG 512MB DIMM Memory for Fantom 158 KS-G8 Stand Fantom GKS-STG8 Secondary Tier 128 FBM-FC-+ FC-FD-FDR-+ FP-4-BK/WH 2158 + FP-+ KSC-44-BK Stand for FP-4-BK/FP-+ KSC-44-WT Stand for FP-4-WH 268 * FR-* FR-1b 1948 FR-FR-2b 3390 FR-3 grey 3548 FR-3b grey, button 3998 FR-3s grey w. speaker 3898 FR-3s white w. speaker 4290 FR-3sb white, button, speaker 4790 FR-3sb grey, button, speaker 4290 FR-5 grey/red 5990 FR-5b button, grey/red 6290 FR-7 grey/red 7690 FR-7b button, grey/red 7790 FS-FS-5L 50 FS-5U 45 FS-FV-50H (high imp.) 108 FV-50L (low Imp.) 108 FV-500H (high imp.) 158 FV-500L (low Imp.) 168 FZ-G GE-7 GEB-7 GFC-50 GI-20 GK-3 GK-3B GKC-3 GR (cable 3m) GKC-5 GR (cable 5m) GKC-10 GR (cable 10m) GR-20GK CHF 89 1098
GT-10 GT-10B + GT-PRO + GW-8E Europe version * GW-8L Latin version BA-CB3 Gig Bag GT-8/6 H HD-1 HP-109P mini grand HP-201-ERW Rosewood HP-201-EMP Maple HP-203-ERW Rosewood HP-203-EMP Maple HP-203-ESB Satin Black HP-204-ERW Rosewood HP-204-ELA Light Oak HP-207-ERW Rosewood HP-207-ELA Light Oak HP-207-EPE Black polished + Piano Bench adjustable + Piano Bench Studio adjustable HPD-10 PDS-10 Stand HPD/SPD + HPD-15 HPi-6S-ERG German Version HPi-6S-ERW HPi-7S J + JC-120 Juno-D + Juno-G + Juno-Stage K KC-60 KC-150 KC-350 KC-550 * KC-880 KCW-1 KD-7 KD-8 + KD-85WT/BK KD-120BK/WT KR-107MH KR-111-PE KR-115-RPE KR-115M-RPE KR-117M-RPE KS-G8 Stand Fantom G8

CHF 5790 CHF CHF 35990 388
KS-STG8 Secondary Tier + KS-12 Stand KS-88 Stand for VK-88 KS-V7 V-Stand * KS-V8 Stand for V-Piano KS-STV7 secondary tier KS-18Z + KSC-44-BK/WH stand FP-4/7 L LMB-3 LS-2 * LX-10 M MD-2 MDH-10 * MDS-4 MDS-9 MDS-12BK MDS-20BK MDY-10 ME-20 Guitar Multiple Effect ME-20B Bass Multiple Effect ME-50 ME-50B CB-50 Carrying Bag ME-50/B * ME-70 MH-8 MH-10 MH-12 Micro-BR BA-M-BR Play Case Micro-BR BA-PC15 Earphone/Cable Set Micro Cube, black/white Micro Cube RX Micro Cube Bass RX Mobile Cube ML-2 MT-2 MT-90U MV-8800 MX-200 Rodgers Module N NS-2 O OC-3 OD-3 OD-20 ODB-3 OS-2 P PD-8 + PD-85WT/BK

CHF 6990 CHF 378

PD-105BK/WT PD-125BK/WT PDS-2 Stand for RMP-3/5 PDS-10 Stand for HPD/SPD PDX-8 PH-3 Piano Bench adjustable Piano Bench Studio adjust. PK-5A PK-7A PK-25 PM-01 PM-10 PM-30 PRELUDE PS-5 PSA-230/PSB-230 PW-10 V-Wah

CHF 378 288

R RAD-50 RAD-99 RC-2 RC-20XL RC-50 RD-300GX RD-700GX RE-20 Space Echo RG-1-SB RG-3 RG-3M (w. moving keys) RG-7-RPE RH-25 RH-50 RH-200 RH-200s RH-300 RH-A30 RH-iE3 Inner Ear Headphone RH-D20 Stage Headphone RH-D30 Stage Headphone RH-L20 Stage Headphone RK-300 (incl. Stand) RKS-88 Speaker Kit for VK-88 RMP-5A RMP-12 Marching Drum OP-RMP12 Carrier Attachment PDS-2 stand for RMP-3/5 RP-101-ERW Home Piano RT-10T RT-10S RT-10K RT-20 RV-5
1898 CHF 158 CHF 148 CHF 128 308

+ + + + * * + +

E-09/E-09W E-50 E-60 E-80 ep880 EQ-20 EV-5 EV-7 EXR-46 OR Oriental Keyboard

fig.explo

D G B C

9 b c b 20 12

g d e f e 32 g g

e 14 15

37 h 35

EXPLODED VIEW PARTS LIST

[PARTS]

No 39 PART CODE 40016512 Part name TOP PANEL BOTTOM COVER RUBBER FOOT EXP COVER DISPLAY HOLDER D C-ESCT HOLDER LM320191 A1DU2L3B034 DISPLAY COVER LED COVER MAIN BOARD ASSY PANEL BOARD ASSY JACK BOARD ASSY RUBBER SW B SPACER RUBBER SW A RUBBER SW ESCT INSULATING COVER ISOLATOR D C-ESCT PWB SPACER PWB SPACER PWB SPACER CARD SPACER WIRING W3 WIRING W1 WIRING BAN CARD BAN CARD BAN CARD COATING CLIP ESCUTCHEON J S-KNOB D R-KNOB(ALPHA-DIAL) J R-KNOB U S-KNOB KNOB G S-BUTTON INSULOK TIE Description QTY 1

FF-018 BLK

LCD UNIT SWITCHING REGULATOR
DA-2496 SW-PS D C-ESCT BX1H BLK WLS-20-0 RSPLS-12L RSPS-12L MPS-10-0
7X150-P2.5-XHP-XHP-F BNCD-P=1.00-K-24-260 BNCD-P=1.00-K-28-100 BNCD-P=1.00-K-30-100 CS-4 D-BEAM CONTROLLER ESCT BLK L BLK/LCG L BLK 248-303 SF-A BLK/LCG M BLK LCG MOLD KNOB BLK S1H BLK 249-175 80M/M T-18S

[SCREW]

No a b c d e f g h PART CODE Part name SCREW 3X6 SCREW 3X6 SCREW 3X8 SCREW M3X10 SCREW M3X6 SCREW 4X8 SCREW 3X8 RING Description BINDING TAPTITE B BZC BINDING TAPTITE B ZC BINDING TAPTITE B BZC BINDING MACHINE NI PAN MACHINE W/SW BZC BINDING TAPTITE P BZC BINDING TAPTITE P BZC SE-9 QTY 10 1

PARTS LIST

fig.part1e
SAFETY PRECAUTIONS: The parts marked have safety-related characteristics. Use only listed parts for replacement.
CONSIDERATION ON PARTS ORDRING
When ordering any parts listed in the parts list, please specify the following items in the order sheet. QTY PART NUMBER DESCRIPTION MODEL NUMBER Ex. Sharp Key C-20/2247017300 Knob (orange) DAC-15D Failure to completely fill the above items with correct number and description will result in delayed or even undelivered replacement.
NOTE: The parts marked # are new. (initial parts)

CASING # # # #

03017789 03017790
DISPLAY COVER LED COVER EXP COVER RUBBER SW ESCT ESCUTCHEON D C-ESCT TOP PANEL BOTTOM COVER
D-BEAM CONTROLLER ESCT BLK

D C-ESCT BX1H BLK

CHASSIS # #

03017745 03017890

D C-ESCT HOLDER DISPLAY HOLDER
KNOB, BUTTON 03014223 D S-KEYTOP D S-KEYTOP Y C-KEYTOP Y S-KEYTOP D T-KEYTOP D S-KEYTOP DS KEYTOP DS-KEYTOP D S-KEYTOP D S-KEYTOP D S-KEYTOP D S-KEYTOP D S-KEYTOP D S-KEYTOP G S-BUTTON DS-KEYTOP KNOB J R-KNOB D R-KNOB(ALPHA-DIAL) J S-KNOB U S-KNOB RUBBER SW A RUBBER SW B SD3H BLK SD2H BLK MX4H CLR LX1H BLK MX4B BLK SX1H DRD SD1H LCG SX1H LCG SX1H BLK SD4H BLK MD1H LCG SX2H BLK SX3H BLK SX1H BLK S1H BLK 249-175

# # # #

********
TC7W74FU TE12L TC74LCX245FT(EL) P2027A-08TR HD74HC238FPEL HD74LV04ATELL TC7SH08FU(TE85L) TC7SH00FU(TE85L) M51953BFP-600C GP1FA501TZ TX HD74LV11ATELL HD74LV245ATELL HY57V641620HGT-P GM71V18163CT-6 HD74LV139ATELL GP1FA501RZ RX TC7SH32FU(TE85L) TC7WU04FU(TE12L) TC74VHC175FT(EL) TC9271FS TC7S08F(TE85L) LC324260BJ-60-TLM M66273FP MBM29LV160BE70
IC IC (CMOS) IC IC (CMOS) IC (CMOS) IC (CMOS) IC (CMOS) IC (RESET) IC (OPTICAL CONNECTOR) IC (CMOS) IC (CMOS) IC (DRAM) IC (DRAM) IC (CMOS) IC (OPTICAL CONNECTOR) IC (CMOS) IC (CMOS) IC (COMS) IC (DIGITAL OUT IF) IC (CMOS) IC (DRAM) LCD-DRIVER IC (FLASH MEMORY)
IC 02900978 TRANSISTOR 15329103T2SC3326-A DTB113ZK-146T 2SK184-GR(TPE4) 2SC3052-T12-1E 2SA1586-GR(TE85R) RT1P141C-T12-1 2SA1037AKT146R RT1N141C-T12-1 2SC3265-Y(TE85R) 2SC2412KR T146 2SK880-GR(TE85R) PW MOSFET 2SJ325-Z-E1 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR FET TRANSISTOR Q11,Q10,Q9,Q8,Q7,Q6,Q5,Q4 on JACK BOARD Q29 on PANEL SHEET Q3 on JACK BOARD Q13,Q14 on JACK BOARD Q11,Q12 on MAIN BOARD Q16 on JACK BOARD Q1,Q12 on JACK BOARD Q13,Q14 on MAIN BOARD,Q2,Q30,Q1 on PANEL SHEET Q28,Q32 on PANEL SHEET Q55,Q3,Q4,Q51,Q52,Q54,Q56,Q57,Q58,Q53 on PANEL SHEET Q7,Q9,Q10,Q8 on MAIN BOARD Q6 on MAIN BOARD M66291GP IC (USB CONTROLLER) IC36 on MAIN BOARD 1
DIODE 00899023 LNJ282RKRXE LED LED102,LED90,LED88,LED41,LED33,LED3 1,LED25,LED17,LED9,LED89 on PANEL SHEET LED76,LED35,LED27,LED43,LED49,LED50 ,LED54,LED55,LED58,LED59,LED62,LED4 4,LED63,LED67,LED72,LED68 on PANEL SHEET LED94 on PANEL SHEET LED87,LED51,LED64,LED73,LED77,LED80 ,LED81,LED84,LED86,LED93,LED95,LED1 00,LED101,LED56,LED47,LED85,LED12,LE D69,LED46, LED3,LED4,LED5,LED8,LED11,LED6,LED 13,LED14,LED16,LED19,LED20,LED45,LE D21,LED40,LED38,LED36,LED37,LED32,L ED30,LED29,LED28,LED24,LED22 on PANEL SHEET Q35,Q34 on PANEL SHEET DA5,DA2,DA4,DA3 on MAIN BOARD,DA84,DA95,DA88,DA87,DA83,D A60,DA64 on PANEL SHEET D2 on JACK BOARD D1 on PANEL SHEET D1 on JACK BOARD DA9,DA6,DA8,DA7 on MAIN BOARD,DA90,DA71,DA48,DA85,DA51,D A52,DA55,DA56,DA65,DA66,DA67,DA68, DA1,DA70,DA45,DA72,DA73,DA74,DA75, DA76,DA77,DA78,DA79,DA80,DA81,DA8 2,DA86,DA92,DA69,DA19,DA2,DA3,DA4, DA6,DA7,DA9,DA10,DA12,DA13,DA15,D A49,DA18,DA44, DA34,DA42,DA41,DA38,DA16,DA35,DA2 2,DA32,DA31,DA29,DA28,DA26,DA25,DA 23,DA37 on PANEL SHEET DA3,DA1,DA2 on JACK BOARD DA27,DA39,DA93,DA53,DA47,DA40,DA9 4,DA21,DA24,DA20,DA17,DA14,DA11,DA 8,DA5,DA46 on PANEL SHEET LED2,10,18,26,34,42,48,53,57,61,66,70,74,78, 71,75,79 on PANEL SHEET 10

00567234 00567245

RPC05T 392 J RPC05T 472 J
MTL.FILM RESISTOR MTL.FILM RESISTOR

00567201 00567256

RPC05T 272 J RPC05T 562 J

00567112

RPC05T 151 J RPC05T 750 J RPC05T 100 J RPC05T 220 J RPC05T 471 J
MTL.FILM RESISTOR MTL.FILM RESISTOR MTL.FILM RESISTOR MTL.FILM RESISTOR MTL.FILM RESISTOR

00566934

RPC05T 330 J

00567078 00566989

RPC05T 271 J RPC05T 560 J

00566967

RPC05T 183 J MCR25 JZH J 1R0 RPC05T 393 J RPC05T 222 J RPC05T 470 J

00567478 00567034

RPC05T 334 J RPC05T 121 J

00567412

RPC05T 224 J RPC05T 184 J RPC05T 104 J
MTL.FILM RESISTOR MTL.FILM RESISTOR MTL.FILM RESISTOR

02456878

RPC05T 563 J RPC05T 473 J RPC05T 680 J RA4C1632-103-J MNR14 EOAB J 100 MNR14 EOAB J 103 EXB2HV220JV
MTL.FILM RESISTOR MTL.FILM RESISTOR MTL.FILM RESISTOR RESISTOR-ARRAY RESISTOR-ARRY RESISTOR-ARRY RESISTOR-ARRAY

00567023

RR1220P-102-D 1K OHM 1/10W 10KD-5 RR1220Q-680-D RA4C1632-220-J RA4C1632-0R0-J RPC05T 152 J RA4C1632-330-J MNR14 EOAB J 000 RPC05T 101 J
MTL.FILM RESISTOR THERMISTOR RESISTOR MTL.FILM RESISTOR RESISTOR-ARRAY RESISTOR-ARRAY MTL.FILM RESISTOR RESISTOR-ARRAY RESISTOR-ARRAY MTL.FILM RESISTOR
RESISTOR R250,R247,R209,R207,R198,R196,R132,R129 ,R126,R125,R124,R120,R119,R118,R127,R98, R87,R89,R86,R90,R91,R76,R94,R105,R75,R4 6,R104,R103,R102,R101,R100,R117,R82,R11 6,R115,R112,R109,R85,R88,R83,R81,R80,R79 ,R108,R107,R78,R77,R106,R84 on PANEL SHEET RA69 on MAIN BOARD R230 on MAIN BOARD RA4,RA10,RA21,RA28 on MAIN BOARD R7 on JACK BOARD,R156,R99,R50 on MAIN BOARD R41,R53 on JACK BOARD R145,R146 on MAIN BOARD R153,R154 on MAIN BOARD R310,R312,R157,R140,R30,R41,R68,R73,R83, R87,R96,R97,R98,R116,R214,R136,R309,R14 1,R144,R147,R150,R187,R237,R239,R258,R3 04,R305,R306,R307,R308,R120 on MAIN BOARD,R221,R220,R189,R188,R187,R140,R 45,R2,R5,R10,R12,R25,R138,R32 on PANEL SHEET R36,R42,R37 on PANEL SHEET R210,R38,R199,R218,R219 on PANEL SHEET R202,R213 on PANEL SHEET R23,R37,R67,R5,R61,R49 on JACK BOARD,R158,R101,R55 on MAIN BOARD R92,R54,R42,R30,R17,R76,R84,R72 on JACK BOARD,R143,R91 on MAIN BOARD,R29,R211,R208,R200,R197,R164,R1 62,R44,R43,R6,R11 on PANEL SHEET R56,R44 on JACK BOARD

Never turn off the power while Factory Reset is being executed. Doing so may destroy the contents of memory.
Press [MENU]. Use [CURSOR] to select Utility.
SYSTEM SOFTWARE UPDATE PROCEDURE
Flash memory is used for the program ROM of the MC-909, and can be updated in either of the following two ways.

fig.cardupdate_70

1. Updating the MC-909 via its SmartMedia slot (recommendation) (time required: approximately 3 minutes) 2. Updating the MC-909 via USB cable from your computer (time required: approximately 3 minutes)
The update procedure is completed. Turn off the power, and remove the update card from the MC-909. Power-on the MC-909, and execute Test mode.
When you execute update, the data of the internal user memory will be lost. If the internal memory of the MC-909 contains data that you want to keep, you must save it on SmartMedia or via USB to your computer.
2. Updating the MC-909 via USB cable from your computer Required equipment
1. 2. UPDATE DATA FOR SERVICE CD-ROM (#17041222) Computer (with USB connector; OS must be Windows Me, Windows 2000, or Windows XP) Must not use the Macintosh OS. One SmartMedia card (64MB or more free space (for USER DATA BACK UP)) USB cable After updating, you must set the destination region and perform the factory reset. If user memory contains important data, save the data (refer to Saving and loading user data) before you perform the update.
1. Updating the MC-909 via its SmartMedia slot Required equipment
1. 2. * 3. 4. * UPDATE DATA FOR SERVICE CD-ROM (#17041222) Computer (OS must be Windows Me, Windows 2000, or Windows XP) Must not use the Macintosh OS. Two SmartMedia cards (one 32MB or larger, one with 64MB or more free space (for USER DATA BACK UP)) SmartMedia reader/writer After updating, you must set the destination region and perform the factory reset. If user memory contains important data, save the data (refer to Saving and loading user data) before you perform the update.

* 3. 4. *

procedural steps
1. 2. Power-on the MC-909. Hold down the [SHIFT] button, and press the [F5] button.
The System screen will appear, and the LCD display will show the following.

Create an update card.

1. 2. 3. 4. Power-on your computer. Insert a 32 MB or larger SmartMedia card into the SmartMedia reader/ writer connected to your computer, and format it. Insert the UPDATE CD-ROM (#17041222) into your computer, and browse to the CARD folder within the CD-ROM. Copy the entire Roland folder (located within CARD) onto the SmartMedia.

Update procedure

1. 2. 3. Insert the update card you created into the MC-909. Inserting the card into the MC-909 will automatically execute the update. When the LCD display shows the following, the update is complete. 3. Press the [F6] button. The System Info screen will appear, and the LCD display will show the following.
fig.test2_70 fig.usbupdate1_70
Press the [ENTER] button. The LCD display will show Initializing., and then the following. If you want to cancel the update procedure, press the [EXIT] button before you press the [ENTER] button. (The procedure cannot be cancelled after this step.)

fig.usbupdate2_70

The MC-909 Menu screen will appear, and the LCD display will show the following.
At this time, [USB STATUS] indicates the state of the USB connection. [USB STATUS] Disconnected. [USB STATUS] Connected. [USB STATUS] Receiving. 8. 9. Power-on your computer. Use a USB cable to connect your computer and the MC-909. (The MC-909 will appear on your computer as a removable disk drive.) Make sure that the LCD display of the MC-909 indicates [USB STATUS] connected. The computer is not connected. The computer is connected. Data is being received from the computer.
Press the [F6] button. The [Service Utility] screen will appear, and the LCD display will show the following.

fig.serviceutil_70

10. Insert the UPDATE CD-ROM (#17041222) into your computer, and navigate to the USB folder within the CD-ROM. 11. Copy the entire Roland folder (located within USB) to the MC-909 (removable disk). The MC-909 will receive the data from the computer. Make sure that the MC-909s LCD display shows [USB STATUS] Receiving. 12. When the MC-909s LCD display changes to [USB STATUS] Connected., copying has been completed. 13. On your computer, use the device eject button displayed in the taskbar at the lower right of the screen to defeat the connection with the MC-909. 14. Disconnect the USB cable. This completes the update procedure. 15. Power-on the MC-909 once again, and execute Test mode.
Cautions when updating via USB
6. Press the [F6] button. The [Program Update Mode (USB)] screen will appear, and the LCD display will show the following. Do not power-off the MC-909 after performing step 7. If the power is turned off, the program will be lost. If this occurs, the only possible action will be to update via SmartMedia. You must restart your computer before you begin the update procedure.

TEST MODE

Required equipment
1. 2. 3. 4. 5. 6. 7. 8. 9. Monitor speaker MIDI cable Audio cable Optical (angular type) cable Coaxial (pin) cable USB cable SmartMedia (formatted; with protect label affixed) SmartMedia (formatted; without protect label) DIMM (for DIMM specifications, refer to Main Specifications)
10. Wave expansion board: SRX series 11. Computer (with USB connector; OS must be Windows Me, Windows 2000, or Windows XP)

Starting up Test mode

1. 2. Power-on the MC-909. Hold down the [SHIFT] button and press the [F5] button. 5. Press the [F5] button, and the LCD display will show the following. Test mode will start up. The System screen will appear, and the LCD display will show the following.
Basic operation in Test mode
Basic operation of the controls is as follows. [F6] [F1] [SHIFT]+[F6] [SHIFT]+[F1] [MENU] or [SHIFT]+[MENU] To the next test screen To the previous test screen Forcibly move to the next test screen Forcibly move to the previous test screen Select test items
When you enter the test item selection screen, the LCD display will show as follows.
Hold down the [SHIFT] button and press the part buttons (see figure below) in the order of [1] -> [7] -> [8] -> [9].

fig.test6_70

The LCD display and the 7-segment display will show the version number of the program. Press the [F6] button to proceed to the next test item. * Make sure that the program version number is 1.03 or later. If it is 1.02 or earlier, read the system update procedure and update the unit to version 1.03 or later.

1. Mute test

This will test the mute circuit on the jack board. The LCD display will show as follows, and an internal pattern of the MC-909 will begin playing.

fig.test11_70

Use the [VALUE] dial, [INC][DEC] buttons, or [CURSOR] up/down buttons to select a test item, and press the [ENTER] button.

Test items

Test the 18 items listed below. 0. Version Check 1.Mute 2.Device 3.DIMM 4.Expansion Board 5.MIDI 6.Card 7.Sound 8.D-Beam Adjustment 9.D-Beam 10.Velocity Pad 11.Encoder 12.Knob/Slider 13.Switch1 & LED 14.Switch2 15.LCD 16.USB 17.Factory Reset Verify that an audio signal is output from the [PHONES] jack and [MIX OUTPUT L/R] jacks. Then press the [F3] button and verify that the audio signal is muted. Press the [F6] button to proceed to the next test item.

2. Device test

This will test the various devices on the main board. When you enter the device test, the LCD display will show as follows, and the device test will begin automatically.

fig.test21_70

Using Test mode
Before you enter Test mode, make sure that the power is not turned on, remove the EXP COVER from the bottom panel of the MC-909, and insert the DIMM and expansion board you provided.

0. Version check

When you enter test mode, you will begin with the version check item.
Devices corresponding to the LCD display indications
LCD display 1:FLASH (NOR) 2:FLASH (NAND) 3:SD-RAM (MAIN) 4:SD-RAM (SMPL) 5:PPC 6:BA 7:WAVE ROM 8:XV 9:XV D-RAM 10:ESP 11:ESP D-RAM 12:USBC
Corresponding main board device IC19 IC53 IC2,6 IC20,24 IC4 IC21 IC28 IC27 IC37 IC22 IC23 IC56
If all the test result is OK for all devices, you will automatically proceed to the next test item.

fig.test51_70

3. DIMM test
This tests the DIMM socket and peripheral circuits. When you enter the DIMM test, the LCD display will show as follows, and the DIMM test will begin automatically.

fig.test31_70

Use a MIDI cable to connect MIDI IN and MIDI OUT. If the test result is OK, you will automatically proceed to the next test item.

6. Card test

This tests the SmartMedia connector and peripheral circuits. When you enter the card test, the LCD display will show as follows.

fig.test61_70

If the test result is OK, you will automatically proceed to the next test item.

4. Expansion board test

This tests the expansion board socket and peripheral circuits. When you enter the expansion board test, the LCD display will show as follows, and the expansion board test will begin automatically.

fig.test41_70

Insert the SmartMedia card you provided (formatted; with protect label affixed) into the SmartMedia card slot. If the test result is OK, the display will change to Protect=OK Please,Remove The Card. When you remove the inserted SmartMedia, the display will change to Insert The Card (Protect=OFF). Next insert a SmartMedia card (formatted; without protect label) into the SmartMedia card slot. If the test result is OK, you will automatically proceed to the next test item. If the test result is OK, the display will change to Read/Write=OK Please,Remove The Card. When you remove the inserted SmartMedia, you will automatically proceed to the next test item.

5. MIDI test

This tests MIDI communication. When you enter the MIDI test without connecting MIDI IN and MIDI OUT by a MIDI cable, the LCD display will show as follows.

8. D-Beam Adjustment test
This adjusts the sensitivity of the [TWIN D BEAM] controllers. This adjustment will optimize the sensitivity of the controller at two distances (5 cm, 45 cm) from the [TWIN D BEAM] controller to the users hand. Here you will also correct any differences in the sensitivity of [D BEAM 1] and [D BEAM 2]. Before the test: In order to perform the D-Beam Adjustment test and the DBeam test, the surroundings of the MC-909 must meet the following conditions. Do not place any objects near the MC-909. (Keep them at least 30 cm away.) Place the MC-909 at a distance (at least 100 cm) from large flat surfaces such as the walls or ceiling. Do not place the MC-909 where strong light (such as direct sunlight or electric light) falls on it.

9. D-Beam test

This tests the operation of the [TWIN D BEAM] controllers. When you enter the D-Beam test, the LCD display will show as follows.
When you enter the D-Beam Adjustment test, the LCD display will show the following.
fig.test91_70 fig.test101_70
First you will test the [D BEAM 1] controller. The LCD display will show L-Max. Place your hand above the [D BEAM 1] controller, and move that hand downward. Verify that the maximum value (L 127) appears in the LCD display when your hand is 5 cm away from the panel surface. If the test result is OK, the LCD display will show L-Min. Place your hand above the [D BEAM 1] controller and move that hand downward. Verify that the maximum value (L 0) appears in the LCD display when your hand is 45 cm away from the panel surface. If the test result is OK, the LCD display will show R-Max, and the [D BEAM 2] controller test will begin. Place your hand above the [D BEAM 2] controller, and move that hand downward. Verify that the maximum value (R 127) appears in the LCD display when your hand is 5 cm away from the panel surface. If the test result is OK, the LCD display will show R-Min. Place your hand above the [D BEAM 2] controller, and move that hand downward. Verify that the maximum value (R 0) appears in the LCD display when your hand is 45 cm away from the panel surface. If the test result is OK, you will automatically proceed to the next test item.
Lightly press [VELOCITY PADS] buttons [1] through [16]. Verify that in the LCD display, the L indication dims for the corresponding button. Strongly press [VELOCITY PADS] buttons [1] through [16]. Verify that in the LCD display, the H indication dims for the corresponding button, and that the button LED goes dark. If the test result is OK, you will automatically proceed to the next test item.

Press the [F6] button to proceed to the all-pixel-on test. The LCD display will show as follows.

fig.test153_70

17. Factory Reset
The settings of the MC-909 differ depending on the destination region. There are three possible settings, as follows. The order of the preset patterns will differ according to the destination region. "100V": P001 R&B 1, P002 Euro Trance 1, P003 Garage 1, P004 Minimal 1, P005 G-Funk 1 "117V": P001 R&B 1, P002 Euro Trance 1, P003 Garage 1, P004 Minimal 1, P005 G-Funk 1 "230V,240V": P001 R&B 1, P002 Euro Trance 1, P003 Garage 1, P004 Minimal 1, P005 G-Funk 1 If the destination region is already set, the LCD display will show as follows, and factory reset will be executed automatically.

fig.117f

Verify that there are no missing pixels or inconsistency in darkness. Press the [F6] button to proceed to the all-pixel-off test. The LCD display will show as follows.

fig.test154_70

Verify that the lower left of the LCD display shows as follows. Voltage area 117V U or 117V U/CS: 230V EU,230V E or 240V A: display 117V 230/240V
If the display shows other than your voltage area, refer to the procedure for changing the destination region, and change it to "100V." When factory reset is completed, the LCD display will show as follows, and you will exit Test mode.

fig.117c

Verify that there is no obtrusive dirt or dust. Press the [F6] button to proceed to the next test item.

16. USB test

This tests USB operation. When you enter the USB test, the LCD display will show as follows.

fig.test161_70

Voltage area :117V U or 117V U/CS
Connect the USB cable to a computer (with USB connector; OS must be Windows Me, Windows 2000, or Windows XP). If the test result is OK, the display will indicate Status: Connect USB Test Completed! On your computer, use the Eject Device button shown in the taskbar in the lower right of the screen to cancel the connection with the MC-909. Press the [F6] button to proceed to the next test item.

VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD

47 D 14 12

D +3. 3 VDD 37 C93 0.46 D C94 10/16
+ 15 Q2 RT1P141C NIU 1 Q4 RT1N141C NIU 1
3 R67 NIU 2 D1 UDZ@ NIU D

DQMDBAD DCKEDCK01 38

VSS VSS
C99 MBM29LV160BE-70FTN 100p

XFLVID

2 D 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 D 19 1

XFLRST XRST5

D + 3. 3 C105 C106 C107 C108 10/D C109 C110 C111 C112 C113 C114 IC1 RXRST C117 D 100p SENDSENDSENDSENDSENDSENDTRCKS C116

DA1 MA142WK-(TX) NIU

VDD5 VDD5 VDD5 VDD5 VDD5 VDD5 VDD5 VDD5 VDD5 VDD5 VDD5

VDD3 VDD3 VDD3 VDD3

DCKE0 DCKE1 DQM0 DQM1

RA42 10k 10

C115 0.1 D A8 A7 A6 A5 A4 A3 A2 A1 OE DIR
D +3. 3 IC23 HD74LV245AT 11 BRETURN5 BRETURN4 BRETURN3 BRETURN2 BRETURN1 BRETURN0 BTRCKR B10 GND VCC

DCK01 DCK00

R79 R81

to CPU bus

DA11 DA10 DA9 DA8 DA7 DA6 DA5 DA4 DA3 DA2 DA1 DA0
R283 R284 R285 R286 R287 R288 R289 R290 R291 R292 R293 R294
DSA11 DSA10 DSA9 DSA8 DSA7 DSA6 DSA5 DSA4 DSA3 DSA2 DSA1 DSA0
BA13 BA12 BA11 BA10 BA9 BA8 BA7 BA6 BA5 BA4 BA3 BA2 A1 A0 BD7 BD6 BD5 BD4 BD3 BD2 BD1 BD0
CA13 CA12 CA11 CA10 CA9 CA8 CA7 CA6 CA5 CA4 CA3 CA2 CA1 CA0 CD7 CD6 CD5 CD4 CD3 CD2 CD1 CD0 INT1 INT0 CS WR RD DIRECT CTYPE EAMPX RFRSH PWRSAV GRAMC SHRMD OSC DA7 DA6 DA5 DA4 DA3 DA2 DA1 DA0 AD3 AD2 AD1 AD0 LRCK1 LRCK0 BCK1 BCK0 MCK1 MCK0 XTESTT XTESTS TESTB
TRR5 TRR4 TRR3 TRR2 TRR1 TRR0 TRCKIN RST2 RST1 VPOUT TRS5 TRS4 TRS3 TRS2 TRS1 TRS0 TRCKO SYO SYI EA9 EA8 EA7 EA6 EA5 EA4 EA3 EA2 EA1 EA0 ED23 ED22 ED21 ED20 ED19 ED18 ED17 ED16 ED15 ED14 ED13 ED12 ED11 ED10 ED9 ED8 ED7 ED6 ED5 ED4 ED3 ED2 ED1 ED0 WE CAS RAS

DQMDBAD DCKEDCK00 38

RASYNC

DTRCKS 6 SENDSEND9

1 RA47 10K 10 D
IC25 EA9 EA8 EA7 EA6 EA5 EA4 EA3 EA2 EA1 EA0 ED11 ED10 ED9 ED8 ED7 ED6 ED5 ED4 ED3 ED2 ED1 ED0 EA9 EA8 EA7 EA6 EA5 EA4 EA3 EA2 EA1 EA0 XERAS XECAS XEWE NC NC A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 RAS UCAS LCAS WE OE NC NC NC NC NC I/O15 I/O14 I/O13 I/O12 I/O11 I/O10 I/O9 I/O8 I/O7 I/O6 I/O5 I/O4 I/O3 I/O2 I/O1 I/O0 VCC VCC VCC 25 ED11 ED10 ED9 ED8 ED7 ED6 ED5 ED4 ED15 ED14 ED13 ED12 ED3 ED2 ED1 ED0

D + 3. 3 R85 R86 D R87 0

NIU NIU

XBARST

D C139 100p
BACKIO XBARST XRD XWE0 XBACS R90 10k R92 R93

207 208

CKI RES CRD CWR CCS DMASTB TMODE SMODE VSS VSS VSS VSS VSS VSS

RA48 10k

48 D + 3. 3 R145 164

10k 181 10k 94

D + 3. 8 10k
XBAWOE R95 XWBACK XWBREQ R96 R97 R98 10k 0 XWCS4 XWCS3 XWCS2

CN9 18FMN-BMTTN-TF 1 NIU D +12 L13 NIU MIDI_OUT 16 MIDI_IN L15 NIU 18 CONTRAST 18 D

C234 100p

D XNFCS BD7 BD6 BD5 BD4 BD3 BD2 BD1 BD19 IC53 I/O8 I/O7 I/O6 I/O5 I/O4 I/O3 I/O2 I/O1 NC NC NC NC NC NC NC NC NC NC NC CLE ALE R/B CE RE WE WP NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC 22

D C355 0.1

IC52 TC74VHC175FT D

D +5 20

C236 0.1 D 19 RLED2 NIU NIU MIC_SW INPUT_SEL XDARST XADARST XTXOUT XFLVID DINSEL D D +3. 5 RA88 10k IC47C XBRD 10 XBWEIC47D D XRST R136 CNIU NFCLE NFALE NFRXB XNFCS
D + 3. 3 XLCDCWAIT LCDCSE

R139 10k

BD7 BD6 BD5 BD4 BD3 BD2 BD1 BD0 IC50B XBWE6 5
D8 D7 D6 D5 D4 D3 D2 D1 CR CK

Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q1

D + 3. 3 VCC VCC C237 0.C239 10/16 C238 0.1 D
XCE2A LCDCLK XRST RC240 100p D D

IC54 TC74HCT273AF D

INPUT_SEL XDARST DINSEL

XNOSRX3 XNOSRX2 XNOSRX1

JK1 YKF45-0020 NIU IC49 M66273FP

RC243 100p D

VSS VSS GND

TC58256FT@

D 10/35

C245 C246 C247 C353

0.1 0.1 0.1 0.1

R237 0

D+ DVBUS

5 B5B-PH-K-S

C67 0.1

C241 0.1

C242 0.1
BA6 BA5 BA4 BA3 BA2 A1 BD15 BD14 BD13 BD12 BD11 BD10 BD9 BD8 BD7 BD6 BD5 BD4 BD3 BD2 BD1 BD0 XUSBCCS XBWE1 XBRD 1 C263 15P

14 R156 1M 13

A6 A5 A4 A3 A2 A1 D15/A0 D14/P6 D13/P5 D12/P4 D11/P3 D10/P2 D9/P1 D8/P0 D7 D6 D5 D4 D3 D2 D1 D0

CORE-VCC CORE-VCC

IO-VCC IO-VCC
D D+ DVBUS TRON 5 RR244 10k D + 3. 3 XIREQ2 R238 10k R150 D + 3. 3 D +3. 3 C255 10/16 1.5K C256 0.1 C250 NIU C251 NIU R145 R27 C249 NIU

RR147 CNIU

L3 EXCML16A@ 27UH L4 EXCML16A@ 27UH RCNXRTS_SUB XCTS_SUB TXD2_SUB RXD2_SUB COMP_RTS COMP_CTS COMP_OUT COMP_IN MIDI_OUT MIDI_IN TXD0_SUB RXD0_SUB

D IC13D HD74LV11AT

D IC50E HD74LV32AT
D IC47E HD74LV32AT C244 SVP@ 150/6.3
R142 SR73K2H@ 0.075 (3/4W) 8 1

D + 3. IN NC NC

R143 1k 3 Q6 2SJ325-Z D2 RB161L-C254 SVP@ 150/6.3 D D RR1220P-@D R153 R154 R220 1k RD + 1. 9 C262 SVP@ 150/6.3

D +5 EN R3 10K A B

EN1A EC12E2420802
IC1A IC1B NIU NIU HD74LV14ATELL

C10 0.01 D D +5 R7 10K

A EN1B

B 12 IC1F NIU 13

R270 150

IC1E NIU 11 IC1G NIU 7

R219 180

C15 0.1

VCC VCC VCC

IC1D NIU

9 C14 0.01 D 1 EXBA10E@J 10K D +RA7 10K 1 R17 R19 R16 NIU(10k) R18 NIU(10k) NIU(10k) NIU(10k) R11 1K

28FMN-SMT-TF

LED94 SML-3 22

HD74LV14ATELL

C11 RC2-V@M 330/6.Q1 RT1N141C 2 D +5

Q2 RT1N141C

AN SEL2 AN SEL1 AN SEL0
CLD/IOB0/T3/PA3 CLC/IOA0/T2/PA2 CLB/T1/PA1 CLA/T0/PA0 IRQ5/SCK1/P95 IRQ4/SCK0/P94 RXD1/P93 RXD0/P92 TXD1/P91 TXD0/P90 AVCC
H8 RXDH8 TXD1 D +5 D 0.01 0.01 0.01 0.01 C18 C19 C20 C21 RC2-V@M 10/16 D D R13 R14 R15 R20 R21 R22 R23 R470 D +5 MD2 C23 0.01 R25 XRST SUB C24 C25 C26 0.01 0.01 0.01 D D C27 NIU D FWE 0 0.1 C17
AVSS VREF AN7/DA1/P77 AN6/DA0/P76 AN5/P75 AN4/P74 AN3/P73 AN2/P72 AN1/P71 AN0/P70 MD2 MD1 MD0 NMI RES STBY RESO/FWE EXTAL

D +5 10

DA93 MA142WA-(TX) AN7 AN6 AN5 AN4 AN3 AN2 AN1 AN0 AN7 AN6 AN5 AN4 AN3 AN2 AN1 AN0 DA94 MA142WA-(TX) 2 1

MA142WK-(TX) DA1

MA142WK-(TX) DA2
A1 A0 D7 D6 D5 D4 D3 D2 D1 D0 LD7 LD6 LD5 LD4 LD3 LD2 LD1 LD0 RD7 D6 D5 D4 D3 D2 D1 DRA8 10K D +A1 A0 D7 D6 D5 D4 D3 D2 D1 D34 B-LIGHT D +5 D +5 XRST SUB R28 10K 2 C127 NIU D SSC1080 R49 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0 RD WR CS INT CLK IC20
D +5 C125 C33 0.1 0.1 D CBN-C-3 PTN29B 2
MA142WK-(TX) PTN30B 2 PTN31B 2 PTN32B 2 PTN33B 2 PTN34B 2 PTN35B 2 PTN36B 2 3

VDD VDD

D +5 SC10 PR10 SC9 PR9 SC8 PR8 SC7 PR7 SC6 PR6 SC5 PR5 SC4 PR4 SC3 PR3 SC2 PR2 SC1 PR1 SC0 PR0 T7 T6 T5 T4 T3 T2 T1 T32

DA3 MA142WK-(TX) 2 D +5

DA4 MA142WK-(TX) 1 2

DA65 PTN29A 1

PTN30A 1

PTN31A 1

PTN32A 1

PTN33A 1

PTN34A 1

PTN35A 1

PTN36A 3 1

LD[0.7] LD[0.7]

D +5RA12 10K 6 5

PTN37B 2

PTN38B 2

PTN39B 2

PTN40B 2

PTN41B 2

PTN42B 2

PTN43B 2

PTN44B 21 22
X4 RAC29 22P D +D D EXBA10E@J 10K SS3 SS2 SS1 SS0 LS3 LS2 LS1 LS9 SS3 SS2 SS1 SS0 LS3 LS2 LS1 LS0 SS3 SS2 SS1 SS0 LS3 LS2 LS1 LS4 RA4 XTAL T15/B7 T14/B6 T13/B5 T12/B4 T11/B3/CS4/MIO3 T10/B2/CS5/MO2 T9/B1/CS6/MIO1 T8/B0/CS7/MO0 MA-406@ 20.000MHZ C28 22P

SC1 PR1 SC0 PR0

RESET TEST1 TEST2 VSS VSS
RASS3 SS2 SS1 SS0 LS3 LS2 LS1 LS0

T0 T7 T6 T5 T4 T3 T2 T1

SW1 SKQNAE 1
D +D Q 5 C128 C129 15P 15P C134 C135 15P 15P D

R189 0

RARA14 10
SSSS222-01-A 11SW2A NIU H8 TXD1 R221 RXDBPULS C30 NIU XDBPULS 0 DBPULS OUT DBPULS OUT
C130 C131 C132 C133 15P 15P 15P 15P C136 C137 C138 C139 15P 15P 15P 15P D +5 IC21B TC7W74FU 8

LED86 SLR-325VC 1 1

MIXER ASSIGN

LED80 SLR-325VC

D +5 C41

<S>
16 IC8 HD74LV138ATELL Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y15 SW2 SKQNAE

DA29 MA142WK-(TX)

0.1 D SS2 SS1 SS6

TONE SW 4

Q43 RN1422 2

LED53 SML-311UT D

LED55 SLR-325DC
D +5 C43 0.1 D 16 IC27 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y15 HD74HC238FP 8 LS2 LS1 LS6

LED D7C LED D7D

LED56 SLR-325VC

LED70 SML-311UT

LED72 SLR-325DC

KEYPAD8

LED54 SLR-325DC 1

KEYPAD12

LED90 LNJ282RKRXE
LED40 SLR-325VC SS3 SS3 SS2 SS1 SS0

C B A G2B G2A G1

PART13

DA17 MA142WA-(TX)

DA31 MA142WK-(TX)

DA32 MA142WK-(TX)

EMPHASIS
DA35 MA142WK-(TX) SWSKQNAE

<P>

SS3 SS2 SS1 SS0

PART14

DA34 MA142WK-(TX)
3 SWSKQNAE 1 DA37 MA142WK-(TX)

COMBINE

SWSKQNAE DA39 MA142WA-(TX) SW2 SKQNAE 3 DA46 MA142WA-(TX) 1 DA49 MA142WK-(TX) SWSKQNAE SWSKQNAE 1 DA38 MA142WK-(TX) SWSKQNAE

Q44 RN1422 2

KEYPAD9

LED57 SML-311UT 1

LED58 SLR-325DC 1

LED59 SLR-325DC 1

D D 1 LS3 LS2 LS1 LS0 LS3 LS2 LS1 LS0 Q45 RN1422 2

MIXER/ PART ASSIGN LED95

KEYPAD 13

LED98 LNJ282RKRXE NIU 2

DB4LS LED D7A

PATCH/ AUDIO

LED73 SLR-325VC

PART15

DA21 MA142WA-(TX) 2

NORMALIZE

LED74 SML-311UT

SWSKQNAE 3 2

KNOB ASSIGN

1 SWSKQNAE

KEYPAD10

LED62 SLR-325DC

LED61 SML-311UT D

LED63 SLR-325DC 1 1

LED64 SLR-325VC 1

KEYPAD 14

LED78 SML-311UT

AUTO SYNC

LED100 SLR-325VC

LED79 SML-311UT 1 1

PITCH (TE)

LED77 SLR-325VC

PART16

DA41 MA142WK-(TX)

DA42 MA142WK-(TX)

TIME STRETCH

Q46 RN1422 2

KEYPAD11

LED66 SML-311UT 1 LED D1
LED67 SLR-325DC 1 LED D2A LED D2B

PATTERN

SLR-325VC LED69

KEYPAD 15 LED71

KEYPAD16