- S u z u k i D L V- St r o m
I n s ta l l a t i o n I n s t r u c t i o n s
This unit has been loaded with map 311-001 for the 2002-2003 model unless specified otherwise. If you have a 2004-2007 model make sure to load a corresponding map.

USB Cable CD-ROM

Power Commander

Parts List

Button Adjustment Display
Installation Guide Power Commander Decals Velcro Dynojet Decals

Power Adapter

Alcohol Swab
Faceplate Buttons USB Port

Expansion Port

The ignition MUST be turned OFF before installation!
You can also download the Power from our web site at:
Commander software and latest maps www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
i311-411 www.powercommander.com 2002-2007 Suzuki DL1000 - PCIII USB - 1
Remove the main seat and the passenger seat.

Fig. A

Remove the black, left hand, side fairing (Fig. A)

Remove this side cover

Fuel tank bracket

Fig. B

Route the wires from the PCIII under the fuel tank bracket and go towards the front of the bike on the left hand side of the engine (Fig. B)

PCIII harness

Unplug this connector
Unplug the connector from the throttle bodies (Fig. C). This connector is behind the frame rail. color. It is black in located on the L.H side of the engine

i311-411

Fig. C

www.powercommander.com

2002-2007 Suzuki DL1000 - PCIII USB - 2

Fig. D

PCIII connectors Stock connectors
Plug the PCIII in-line of these connectors (Fig. D).
Attach the ground wire from the PCIII to the negative side of the battery (Fig. E).

Fig. E

Ground wire from PCIII
Install the PCIII in the tail section
using the supplied velcro. Make sure ing unit (Fig. F).
to clean both surfraces before attach-
2002-2007 Suzuki DL1000 - PCIII USB - 3