SCHEDULED MAINTENANCE CHECK SHEET
Daytona 600 & Daytona 650
Customer Name: Job No: Registration No: Mileage: V.I.N.: Under Warranty: Yes/No Model: Date of registration: Todays date: Technician Name: Work completed (sig)__________ Handbook stamped: - = Complete
Carry out all the operations specified below at the required intervals. Additional operations must be carried at the specified time/mileage interval whichever comes first. IMPORTANT: Under severe operating conditions, certain items require more frequent servicing, refer to the owners handbook for further information.
First 500 Miles/800 Kms/1 Month* Every 6000 miles/10000 Kms 1 year* Every 12000 miles/20000 Kms 2 years* Every 18000 miles/30000 Kms 3 years* Every 24000 miles/40000 Kms 4 years* * Whichever comes first Lubrication - - - - - 1. - - - - - 2. - - - - - 3. Engine oil - renew. Engine oil filter - renew. Engine/oil cooler - check for leaks. Fuel system/engine management - - - - - 1. - - - - - 2. - - - - - 3. - 4. - 5. - 7. - 8. - 9. Throttle cable - check/adjust. Fuel system - check for leaks. Engine ECM - check for stored DTCs. Air cleaner - renew. Fuel filter - renew. Throttle bodies - balance. Secondary air injection system - clean and reset. Evaporative hoses - renew (California only). Fuel hoses - renew. Ignition System 1. - 2. Spark plugs - check. Spark plugs - renew. Cooling System - - - - - 1. - - - - - 2. Coolant level - check/adjust. Cooling system - check for leaks. Wheels/tyres - - - - - 1. - - - - - 2. - - - - - 3. Wheels - inspect for damage. Tyres wear/tyre damage - check. Tyre pressures - check/adjust. Steering and Suspension - - - - - 1. - - - - - 2. - - - - 3. - 4. - 5. Steering - check for free operation. Forks - check for leaks/smooth operation. Headstock bearing - check/adjust. Headstock bearing - lubricate. Fork oil - renew. Brakes - - - - - 1. - - - - - 2. - - - - - 3. - - - - - 4.

E Triumph 2006

First 500 Miles/800 Kms/1 Month* Every 6000 miles/10000 Kms 1 year* Every 12000 miles/20000 Kms 2 years* Every 18000 miles/30000 Kms 3 years* Every 24000 miles/40000 Kms 4 years* Electrical - - - - - 1. * Whichever comes first
Lights, instruments & electrical systems - check. Drive Chain

1. - 3.

Drive chain rubbing strip - check. Drive chain slack - check/adjust. Drive chain rubbing strip - renew. Drive chain - wear check. Drive chain - lubricate. Engine
- - - - - 2. - - - - - 4. - - - - - 5.

- - - - - 1. - 2.

Clutch cable - check/adjust. Valve clearances - check/adjust. { General

- - - - 6. -

- - - - - 1. - - - - - 2. - - - - - 3. - - - - - 4.
Fasteners - inspect visually for security. Carry out all outstanding service bulletin and warranty work. Carry out road test. Complete service record book.
ADDITIONAL OPERATIONS The following additional operations must be carried out at the specified time intervals measured from the date of delivery as a new motorcycle. Every 2 years - 1. Coolant - renew. - 2. Brake fluid - renew. NOTES The following notes must be referred to as necessary during scheduled servicing. { Renew checked items if worn beyond the service limit. Adjustment of valve clearances subject to additional labour charge above cost and time allowance for the basic service which includes time to check only.
Daily checks must also be carried out as specified in the owners handbook.
Brake fluid levels - check. Brake pads - check wear levels. Brake calipers - check for leaks/siezed pistons. Brake master cylinders - check for leaks. -