Installation Instructions for Mustang Tank Bib on 1999-2011 Yamaha Venture
Installation of tank bib 1. Remove the gas cap; remove the two screws from the dash panel. Remove dash panel from gas tank.
2. Lay tank bib cutouts over filler opening and two dash panel mounts.
3. Reinstall the dash panel and tighten both screws. Replace gas cap.
4. Remove tank mounting bolt at base of gas tank. Put the rubber washer onto the bolt, then push the bolt through the opening in the end of the tank bib and tighten.
These steps are guidelines to help you install your new Mustang product. If you need further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern or send an e-mail to questions@mustangseats.com or visit our website at www.mustangseats.com. For care and maintenance of our seats, please go to our website under "Support".
Ref. part #s 93215, 93216, 93346, 93347

Installation Instructions for Mustang One-Piece Seat on 1999-2011 Yamaha Venture
Removal of stock seat 1. Remove two nuts from under front of stock seat, one on each side. 2. Lift front seat up and off of the motorcycle.
3. Locate and remove two bolts front end of rear seat. 4. Slide rear seat up and forward to remove it from the bike.
5. With stock seats removed, it will be easy to locate the three mounting points needed to install the Mustang one-piece seat. The Mustang seat uses the two mounting tabs on the sides of the frame, just behind the gas tank; -and the single rear fender bracket at the back end of the rear fender.
Installation of Mustang seat
1. Engage rear tab on bottom of seat into bracket on rear fender.
2. Align threaded studs on bottom of front of seat with two mounting holes in frame.
3. Install and tighten 1/4-20 nuts onto two threaded studs for a secure installation.
Enjoy the comfort of your new Mustang seat.
These steps are guidelines to help you install your new Mustang product. If you need further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern or send an e-mail to questions@mustangseats.com or visit our website at www.mustangseats.com. For care and maintenance of our seats, please go to our website under "Support".
Ref. part #s 76258, 76259, 79618, 79619