How to upgrade the Samsung Galaxy SPICA i5700 mobile phone to Android 2.1 operating system

Required:

Computer with the Microsoft Windows operating system (Windows XP, Windows Vista or Windows 7), internet access and available USB port. Minimum system requirements are 1 GHz Pentium CPU, 512 MB RAM, 500 MB free hard drive space, and 1024x768 video resolution. USB data cable

Before starting:

Fully charge the phone battery. On the phone, select Settings > SD card & phone storage and deselect Mass storage only (if necessary, click the selection box to remove green check mark). Back up all data you want to retain to the PC using Microsoft ActiveSync or Windows Mobile Device Center software.

WARNING

Updating the phones operating system will reset the phone to the factory default settings and erase all data and applications saved to the phone. Files protected by digital rights management (DRM) may be deleted unless your ownership rights have been backed up. Samsung Electronics Canada assumes no responsibility or liability for the loss of data or applications resulting from this upgrade.

Upgrade procedure:

1. Download the Samsung Kies mini software package version Kiesmini_1.0.0.10075_1.exe from Web site www.samsung.ca and save it to the computer. 2. Double-click the file to start the software installation process. NOTE: The setup file checks for a previous version of Kies/Kies mini on the computer and, if found, removes the older version. If this occurs, restart the installation process by doubleclicking the file again.

i5700 Upgrade Procedure

Page 1
3. Select Country > Canada, Language > English and click Next.
4. View the license agreement and click the check box to accept the terms of the agreement. If necessary, change the default location to save the program files (click Browse and navigate to the required location). Click Next. The Installation Wizard installs and configures the software on your computer.

Page 2

5. Select Launch Kies mini and click Finish to complete the installation and start the program (you can also double-click the Samsung Kies mini desktop icon or select Samsung Kies mini from the Start menu to start the program at any time).
6. When the instruction Please connect your mobile appears, turn on your phone and connect it to the PC using the supplied USB connection cable.

Page 3

7. When the upgrade screen appears, click Mobile Phone Upgrade.
8. When the upgrade confirmation screen appears, carefully read the warning information, click the check box to confirm that you understand the requirements, then click Upgrade to start the upgrade process.

Page 4

The Kies software downloads the appropriate upgrade for your phone from the Internet.
The upgrade software is automatically installed on your phone.

Page 5

An upgrade typically takes 10 to 30 minutes, but may take longer depending on the speed of your network connection and whether other software is running on the PC at the same time.
Do not disconnect the USB cable, switch off the phone, place a call or answer an incoming call, or press buttons and access menus while the upgrade procedure is being performed or your phone may cease to work correctly. If the upgrade is disrupted or an error occurs during the procedure, click the link [There is a record of Mobile Phone Upgrade failure] that appears at the bottom of the screen and follow the instructions provided to switch the phone to recovery mode. If the emergency recovery procedure fails to recover your phone, please visit an authorized Samsung Electronics service centre for assistance. 9. When the upgrade confirmation screen appears, your phone has been successfully upgraded. Click OK to close the program.
10. To confirm the success of this update, on the phones idle screen select Phone and enter *#1234# on the keypad. The version screen should indicate the following: PDA : i5700UXJF5 PHONE : i5700UXJF5 CSC : i5700UXJF3

Page 6

Troubleshooting:
If there is a problem with the upgrade, the following screen will appear.
To troubleshoot the problem: 1. Disconnect the phone from the computer. 2. Remove the battery from the phone for a few seconds, reinsert the battery and power on the phone. 3. If the phone starts OK, repeat the upgrade procedure starting at step 6. If the phone does not start, click Emergency Recovery on the message screen and follow the onscreen instructions for restoring phone operation.

Samsung i5700 Flashing Guide - Gsm-data Free gsm support
Written by Administrator Monday, 03 May 2010 18:52 - Last revised Monday, 03 May 2010
iles you need: All files that you need you can download here:
http://hotfile.com/dl/30969643/25576bc/gallaxy_spica_firmware_21_odindown_drivers.zip.html

or from here:

Downloads - i5700 - GSM-data Free Gsm Support |
Before you start flashing:

- backup your data

- Check your simlock: SIM Lock is [OFF] - Dial *#7465625# to check. If it is not OFF, remove simlock before flashing (unlock you phone)

- enter "2767*3855#

- Fully charge your battery
- Exit samsung pc studio software
- Remove SIM and microSD card

Flashing

1. put i5700 into download mode by holding "volume down + camera key + power on" at the same time:
2. connect phone with PC via USB cable, it will ask for drivers, needed drivers are in package which you can download from link above. Install them. Open you device manager to check if your drivers are installed corectly, it should be like this:
3. Select options and image files as shown on picture below:
NOTE: Please want tofinishedand3DISCONECT MOBILEshown on pitcture. is required to change spica.ops you PICTURE ABOVE. NOTE1: If file. select optionsNOT file too files exactly ias FROMyou how, it IT IS SHOWN "PASS", AS ON button. DO in minutes max. 4. Flashing should be flash CSC image contact me will show PC UNTIL 5. Press START

original link