TomTom XL

Whats in the box

EasyPortTM mount

Car Charger

Documentation pack

USB cable

Getting started

Install your TomTom XL in your car following the instructions on the installation poster at the start of this book. To switch on your TomTom XL, press and hold the On/Off button for 2 seconds. The first time you switch on your device, it may take a short while to start. You have to answer a few questions to set up your device.

Having problems?

In rare cases, your XL may not start correctly or may stop responding to your taps. First, check that the battery is charged properly. To fully charge the battery, you need to charge it for at least 2 hours. If this doesnt work, you can reset your device. To do this, press and hold the Power button for fifteen seconds. Release the Power button when device begins to restart.

Charging your TomTom XL

Before you use your XL for the first time, its a good idea to charge it fully using the home charger, which takes about 2 hours. There is no charging light on your XL. To check the battery status and see when your XL is charging, switch on your device and tap the bottom righthand corner of the screen in the Driving View. The battery status is shown on the next page.

Improving reception

If your TomTom XL takes longer than 5 minutes to find your current position, make sure that the device is in an open space away from tall objects such as buildings or trees. When you connect your TomTom XL to your computer, you can use TomTom HOME to download information about GPS satellite positions during the next 7 days. This helps your XL to find your position faster. Important: Some vehicles have heat reflective shielding in the windshield. This may prevent your XL from locating your current position.
Take care of your TomTom XL
Never leave your TomTom XL or accessories in view when you leave the car or they may become an easy target for thieves.
You can set a password for your TomTom XL which must be entered every time you start your XL. It is important to take care of your XL. Your XL is not designed for use in extreme temperatures and any such exposure may cause permanent damage. Do not open the casing of your XL under any circumstances. Doing so may be dangerous and will invalidate the warranty. Wipe or dry the screen of your XL using a soft cloth. Do not use any liquid cleaners.

Driving View

When your TomTom XL starts, you are shown the Driving View along with detailed information about your current location. Tap the center of the screen at any time to open the Main Menu. Note: The Driving View is shown in black and white until your XL locates your current position.

A B C A D

A Tap + and - to zoom in and out. B Your current position. C The name of the next major road or road sign information, if applicable. D Traffic bar - requires an RDS-TMC Traffic Receiver (available as an accessory). E Navigation instruction for the road ahead. Tap this area to repeat the last spoken instruction and to change the volume. F The name of the street you are on. G Information about your trip such as trip time, remaining distance and arrival time. To change the information shown, tap Status bar preferences in the Preferences menu. H GPS signal strength.

Making your first trip

Planning a route with your TomTom XL is easy. To plan your first route, follow the steps below. Important: You should always plan your journey before you start driving. It is dangerous to plan a route while driving. 1. Tap the screen to bring up the main menu. Note: The buttons on your XL are shown in full color unless a button is currently unavailable. For example, the button named Find alternative. in the Main Menu is not available until you have planned a route. 2. Tap Navigate to.

3. Tap Address.

When you enter an address, you can choose from the following options: City center - tap this button to set your destination as the center of a city or town. Street and house number - tap this button to set an exact address as your destination. ZIP code - tap this button to enter a ZIP code as your destination. Cross street or intersection - tap this button to set your destination as the point where two streets meet. In this example, we will enter an exact address. 4. Tap Street and house number.
Note: When planning a trip for the first time your XL asks you to choose a state or country. Your choice is saved and used for all routes you plan. You can change this setting at any time by tapping the state symbol or country flag. 5. Start to type the name of the town where you want to go.
As you type, the names of the towns that match what you have typed are shown. When your destination appears in the list, tap the name of the town to set the destination. 6. Start to type the name of the street and select it when it is shown. As with the name of the town, the names of the streets that match what you have typed are shown. When your destination appears in the list, tap the name of the street to set the destination. 7. Now enter the house number of your destination and then tap Done.
8. Your XL asks if you need to arrive at a particular time. For this exercise, tap NO. The route is calculated by your XL. 9. When the route has been calculated, tap Done. Your XL will immediately begin to guide you to your destination, using both spoken instructions and on-screen directions.

Calculate alternative

Your XL will look for another route from your current location to your destination. If you decide you would prefer to use the original route after all, tap Recalculate original. Why would I need to do this? Apart from the roads near your position and near your destination, the new route will use totally different roads to reach your destination. This is an easy way of calculating a totally different route. Tap this button if you can see a roadblock or a line of traffic ahead. You then have to choose how much of the route ahead you want to avoid.

Avoid roadblock

Choose from the different options: 100m, 500m, 2000m, 5000m. Your XL will recalculate your route avoiding the section of the route for the distance you selected. Dont forget that once a new route is calculated, you may have to turn off the road you are on very soon. If the roadblock suddenly clears, tap Recalculate original to return to your original route.
Tap this button to change your route so that it passes a particular location, perhaps to pick someone up on the way.

Travel via.

You choose the location you want to pass in the same way as you choose a destination. So you can select from all the same options: for example, Address, Favorite, Point of Interest and Point on map. Your XL will calculate a new route to your destination that passes the location you chose. Unlike your final destination, your XL does not inform you when you pass by this location. Using this button, you can only travel via one location. If you want to pass more than one, use an Itinerary. Tap this button to return to the original route without deviations to avoid roadblocks or traveling via particular locations.

Recalculate original

Tap this button to avoid a part of the route. Use this button if you see that your route includes a road or junction you dont like, or which is wellknown for traffic problems.

Avoid part of route

You then choose the road you want to avoid from a list of the roads on your route. Tap this button to recalculate your route so that it avoids traffic problems as much as possible. Your XL will check if there are any traffic problems on your route and work out the best route to avoid the problems.

Minimize delays

Note: This button is only available with TomTom Traffic enabled.

Sounds and voices

The sound on your TomTom XL is used for features such as: Spoken instructions Warnings
How do I change the volume level?
You can change the volume in three ways: Tap the bottom left hand area of the Driving View. The last spoken instruction is repeated and the volume level is shown. Move the volume slider to adjust the volume. In the Main Menu, tap Change preferences, then tap Volume preferences. Tap Test to check your changes.

Selecting a voice

To change the voice being used by your TomTom XL, tap Voice preferences in the Preferences menu, then tap Change voice. Select a voice from the list.

Voice preferences

Help me!
Help me! provides an easy way to navigate to emergency services centers and other specialist services and contact them by phone. For example, if you are involved in a car accident, you could use Help me! to call the nearest hospital and tell them your exact location.
How do I use Help me! to call a local service?
You can use Help me! to find and make contact with a service center. To use Help me! to locate a service center, contact the center by phone and navigate from your current location to the center, do the following: 1. Tap the screen to bring up the main menu. 2. Tap Help me! 3. Tap Phone for help. 4. Select the type of service you require, for example, Nearest hospital. 5. To dial, select a center from the list, the nearest is shown at the top of the list. Once the call is answered your XL shows your position on the map along with a description of the location. This helps you explain where you are while making a call. 6. To navigate your way to the center on foot, tap Walk there. Your XL starts guiding you to your destination.

Options

Use your TomTom XL to find the location of a service and the contact details.

Phone for help

Emergency services Emergency breakdown services Nearest police station Nearest doctor Nearest hospital Nearest public transport Nearest car repair services Nearest dentist Nearest pharmacy Nearest vet Note: In some countries, information may not be available for all services. Use your TomTom XL to navigate your way by road to a service center. Nearest car repair services Nearest hospital Nearest doctor Nearest police station Nearest pharmacy Nearest dentist Note: In some countries, information may not be available for all services. Use your TomTom XL to navigate your way on foot to a service center. Nearest gas station Nearest public transport Nearest police station Nearest pharmacy Home Nearest doctor Note: In some countries, information may not be available for all services. Your TomTom XL shows your current location. You can then tap Phone for help to select the type of service you want to contact.

Drive to help

Walk to help

Where am I?

Tap this button to read the British Red Cross First Aid guide.

First Aid Guide

Tap this button to read a selection of useful guides.

Other guides

Favorites

What are Favorites?

Favorites are places that you often visit. You can create Favorites so that you dont have to enter the address every time you want to navigate there. They dont have to be places you especially like, just useful addresses.
How can I create a Favorite?
From the Main Menu, tap Add Favorite. Note: The button Add Favorite may not be shown on the first page of the Main Menu. Tap the arrow to open other pages in the Main Menu. You can then select the location of the Favorite from the list below. Give your Favorite a name that is easy to remember. Your XL will always suggest a name, usually the address of the Favorite. To enter the name, just start typing. You dont have to delete the suggested name. You can set your Home location as a Favorite.
You cannot create a Favorite from another Favorite. This option will always be unavailable in this menu. To rename a Favorite, tap Manage Favorites in the Preferences menu.
You can specify an address to be a Favorite. When you enter an address, you can choose from four options. City center Street and house number ZIP code Crossing or intersection
Select a Favorite location from a list of places you have recently used as destinations.
You can add a Point of Interest (POI) as a Favorite. Does it make sense to do this?
If you visit a POI you particularly like, for example a restaurant, you can add it as a Favorite. To add a POI as a Favorite, tap this button, then do the following: 1. Narrow your choice of POIs by selecting the area where the POI is. You can select one of these options: POI near you - to search from a list of POIs near your current position. POI in city - to choose a POI in a particular town or city. You have to specify a town or city. POI near Home - to search from a list of POIs near your Home location. If you are currently navigating to a destination, you can also select from a list of POIs which are on your route or near your destination. Choose one of these options: POI along route POI near destination 2. Select the category of POI. Tap the category of POI if it is shown or tap the arrow to choose from the complete list. Tap Any POI category to search for a POI by name. Tap this button to add your current position as a Favorite. For example, if you stop somewhere interesting, while you are there you can tap this button to create the Favorite.

Tap this button to add your current position as a POI. For example, if you stop somewhere you like, while you are there you can tap this button to create the POI.
Tap this button to create a POI using the map browser. Select the location of the POI using the cursor, then tap Done.
Tap this button to create a POI by entering latitude and longitude values.
Tap this button to select your last recorded position as your destination. This may be useful if your XL is unable to maintain a strong GPS signal, for example, when you drive through a long tunnel.

Navigating to a POI

You can use a POI as your destination. For example, if you are traveling to an unfamiliar city, you could choose a POI to help find a parking garage. 1. Tap the screen to bring up the main menu. 2. Tap Navigate to. in the Main Menu. 3. Tap Point of Interest. 4. Tap POI in city. 5. Narrow your choice of POIs by selecting the area where the POI is located. You can select one of these options: POI near you - to choose from a list of POIs near to your current location. POI in city - to find a POI in a particular town or city. POI near Home - to choose from a list of POIs near to your Home location. You can select from a list of POIs which are along your route or close to your destination. Choose from one of these options: POI along route POI near destination Note: The last POI you viewed is also shown so that you can plan a route there more quickly. 6. Type the name of the town you want to visit and select the town when it appears in the list. 7. Select the category of POI: Tap Any POI category to search for a POI by category name. Tap the category of POI, if it is shown. Tap the arrow to choose from the complete list of categories. Select the category from the list or start to type the name of the category and select it when it appears in the list. 8. Tap Parking garage. 9. From the list of POIs shown, select the POI you want to navigate to. The table below explains the distances listed next to each POI. POI near you POI in city POI near Home POI along route POI near destination Distance from your current location Distance from the city center Distance from your Home location Distance from your current location Distance from your destination

If you know the name of the POI, tap Find and type the name. Select it from the list when it is shown.
The next screen shows more detailed information including the location of the POI on the map and the phone number of the POI, if available. Tap Select to confirm you want to plan a route to this POI. Once you have selected a POI, the route to the POI is calculated by your TomTom XL.

Showing POIs on the map

1. Tap Show POIs on map in the Preferences menu.

Show POI on map

2. Select the POI categories to display on the map. Tap Find to search for a POI by name. 3. Tap Done. The POIs you have selected are shown as symbols on the map.
How can I set warnings for POIs?
1. Tap the screen to bring up the main menu. 2. Tap Change preferences. 3. Tap Warn when near POI. Tap this button to receive a warning when you travel near to the location of a POI.

Warn when near POI

4. Select the category of POI you want to be warned about. Select the category from the list or start to type the name of the category and select it when it is shown in the list. 5. Set how close the POI should be when you receive a warning. 6. Choose the warning sound for the category of POI you selected.

Managing POIs

Tap Manage POIs from the Preferences menu.

Manage POIs

You can, for example, do the following: Create your own POI categories and add POIs to them. Set warnings when you get close to POIs. Why would I want to create my own POIs?
A POI acts like a shortcut - once you have saved a location as a POI you never have to type the address of that POI again. But when you create a POI you can save more than just the location. Phone number - when you create a POI, you can save a phone number with it. Categories - when you create a POI you have to put it in a category. For example, you could create a category of POIs called Favourite restaurants. With each POI, save the phone number so that you can call them from your XL to reserve a table. For example, you could create a category of POIs called Favourite restaurants. With each POI, save their phone number so that you can call them to reserve a table.

Itinerary Planning

What is an Itinerary?
An Itinerary is a plan for a trip including more locations than your final destination. An Itinerary can include the following items: Destination - a location on your trip where you want to stop. Waypoint - a location on your trip you want to travel through without stopping. Heres an example of an Itinerary:

Mark as destination

Mark visited
This button is only shown if you are still due to visit this item. Tap this button to repeat part of your Itinerary. Your XL will navigate you to this item followed by the rest of the items in the Itinerary. This button is only shown if you have already visited this item.

Mark to visit

Tap this button to move the item up the Itinerary. This button is unavailable if the item is at the top of the Itinerary.

Move item up

Tap this button to move the item down the Itinerary. This button is unavailable if the item is at the bottom of the Itinerary.

Move item down

Tap this button to see the location of the item on the map.

Show on map

Tap this button to delete the item from the Itinerary.

Delete item

Start Using an Itinerary
Tap Options, then tap Start navigation. To save an Itinerary, tap Save Itinerary. To load a saved Itinerary, tap Load Itinerary. To create a new Itinerary, tap New Itinerary and to delete one, tap Delete Itinerary.

Preferences

Use night colors / Use day colors
Tap this button to reduce the brightness of the screen and show darker colors on the map. When should I use this?

Use night colors

When its dark, it is easier to see the screen if the display on your XL is not brightly lit. To change back to a brighter screen showing brighter colors on the map, tap Use day colors.

Use day colors

Tap this button to set which categories for the Points of Interest (POIs) should be shown on the map: 1. Tap Show POIs on map in the Preferences menu.
2. Select the POI categories to display on the map. Tap Find to search for a POI category. 3. Tap Done. The POIs you have selected are shown as symbols on the map.

Safety preferences

Tap this button to set the following safety preferences: Hide most menu options while driving
Suggest driving breaks Show safety reminders Warn when near places of worship or schools Warn when driving faster than allowed Warn when driving faster than a set speed Warn not to leave the device in the car If you select one or more of the warnings, you will also be asked to select a sound to be played whenever a warning is displayed. Select whether or not your TomTom XL should warn you about which side of the road you should be driving on. Decide if you want the map display to be turned off in special circumstances and press Done. What happens when I use the Turn off map display option? When you turn off the map display, instead of seeing your position on a map in the Driving View, you will only see information about the next instruction. Tap the button and select an option for when the map should be turned off. These are the options: Always - The map will not be shown and you will only see information about the next instruction and arrows showing direction. Above a certain speed - you set the speed at which point the map will be turned off. This option is useful for situations when the map might be distracting, such as when you are driving fast. Never - the map is never turned off.

Ask me every time I plan Always plan fastest routes Always plan shortest routes Always avoid freeways Always plan walking routes Always plan bicycle routes Always plan for limited speed You can then set if the route summary screen closes automatically after you have planned a route. If you select No, you have to tap Done to close the route summary screen.

Change language

Tap this button to change the language used for all the buttons and messages you see on your XL. You can choose from a wide range of languages. When you change the language, you are also given the opportunity to change the voice.

Set owner

Tap this button to enter your name and address as the owner of your XL and to change or delete a 4-digit password for your XL.
Note: You can only change or delete a 4-digit password on your TomTom XL. You can create a 4-digit password for your XL using TomTom HOME: 1. Connect your XL to your computer and turn on your XL and your computer. TomTom HOME starts automatically. 2. Click on Operate my XL in TomTom HOME. Your XL appears and can be controlled using TomTom HOME. 3. From the Main Menu, click Change preferences. 4. Click Set Owner. You can now set a 4-digit password for your XL. You can only create a 4-digit password using TomTom HOME.
Operate left-handed / Operate right-handed
Tap this button to move important buttons, for example, the Done and Cancel buttons as well as the zoom bar, to the left hand side of the screen. This makes it easier to tap the buttons with your left hand without blocking the screen.

Operate lefthanded

To move the buttons back to the right hand side of the screen, tap Operate right-handed.

Brightness preferences

Tap this button to set the brightness of the screen. Move the sliders to set the brightness separately for day map colors and for night map colors.
You can set the map color scheme by tapping Change map colours.

Change map colors

Tap this button to select the color schemes for day and night map colors. You can also download more color schemes from TomTom Services.

Set units

Tap this button to set the type of units that will be shown for the following: Distance
Time Latitude and longitude Temperature Air pressure

Set clock

Tap this button to select the type of clock that is shown and set the time. The easiest way to set the time is by tapping the Sync button. Your XL will then take the time from GPS information.

Map updates

There are two types of map update: Updates that are immediately shown on the map. These include, changing the traffic flow of a street, blocking or renaming a street and adding or editing POIs. This type of change is immediately shown on your own map. You can hide these updates at any time in the Map Share preferences menu. Updates that are reported to TomTom but not shown immediately on your map. These include, missing streets, errors in freeway entrances and exits and missing roundabouts. This type of update is investigated by TomTom and once verified, is included in the next map release. These updates are therefore not shared with the Map Share community.

Making a map update

1. Tap Map corrections in the Main Menu. 2. Tap Correct a map error.

Correct a map error

A list of possible map updates is shown. 3. Select the type of update you want to report. Note: If you tap Add missing POI or Report other error you will be asked for some additional information before the next step. 4. Select the method you want to use for selecting the location of the update. 5. When you have found the location, tap Done. 6. Enter update or confirmation of update now.
Receiving the latest map updates
When you connect your TomTom XL to your computer, TomTom HOME automatically downloads any available map updates and sends any changes you have made, to the Map Share community. There are several types of updates which can be set in the Correction preferences menu.
Marking a map error while on the move
If you notice an item on your map that needs attention, you can mark the location using the Report button and then enter the details when you are no longer driving. To show the Report button in the Driving View, do the following: 1. Tap Map corrections in the Main Menu. 2. Tap Correction preferences. 3. Tap Done and then tap Done again. 4. Select Show report button, then tap Done. The Report button is shown on the left-hand side of the Driving View. After you mark a location, you can add more information about the change when you open the Map corrections menu. For example, you are driving to a friend's house and you notice that the name of the street you are on is different from the one on your map. To report the change, tap the Report button and your XL will save your current location. You can then send the update to TomTom Map Share when you have finished your trip.

Setting up TMC

To start using TMC all you need to do is connect the RDS-TMC Traffic Receiver to your TomTom navigation device. Important: When you install your navigation device in your car, dont block the drivers view of the road. 1. Connect the RDS-TMC Traffic Receiver to your navigation device. 2. Connect the Car Charger to the RDS-TMC Traffic Receiver and then plug the Car Charger into your cars cigarette lighter socket. Note: The RDS-TMC receiver does not work if the Car Charger is not connected. 3. Place the transparent suction cup at the tip of the antenna firmly against the upper left hand corner of your car windshield.
4. Then place the remaining suction cups along the edge of the windshield, as shown, keeping the cable straight. 5. Switch on your navigation device. The Traffic bar is shown in the Driving View and your navigation device searches for a radio station that carries RDS-TMC information.
These symbols are shown at the top of the traffic sidebar: Your XL has the latest RDS-TMC traffic information. Your XL is waiting to download the latest RDS-TMC traffic information as soon as it is available. Your XL is searching for a radio station that carries RDS-TMC traffic information.
Using RDS-TMC traffic information
As soon as you start receiving traffic information, the traffic sidebar is shown on the right side of the Driving View. The traffic sidebar warns you about any traffic incidents on your route. In this example, there is a traffic jam on your route 9 kilometers ahead that will cause an expected delay of 38 minutes. To find the quickest route to your destination, do the following: 1. Tap the Traffic sidebar. 2. Tap Minimize traffic delays. Your device looks for the quickest route to your destination. The new route may also include traffic delays, or may even be the same route as before. 3. Tap Done.
Changing traffic preferences
Use the Change Traffic preferences button to choose how traffic information works on your device.
To change your traffic preferences, do the following: 1. Tap the TomTomTraffic button in the Main Menu on your device.

Battery

This product uses a Lithium-Polymer battery. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 60 C (140 F). Failure to follow these guidelines may cause the Lithium-Polymer battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at low (below 0 C/32 F) or high (over 45 C/113 F) temperatures. Temperatures: Standard operation: -10 C (14 F) to +55 C (131 F); short period storage: -20 C (-4 F) to + 60 C (140 F); long period storage: -20 C (-4 F) to +25 C (77 F). THE LITHIUM-POLYMER BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY. USE YOUR TomTom ONLY WITH THE SUPPLIED DC POWER CABLE (CAR CHARGER/BATTERY CABLE) AND AC ADAPTER (HOME CHARGER) FOR BATTERY CHARGING. To recycle your TomTom unit please see your local approved TomTom service center.
SPECIAL NOTE REGARDING DRIVING IN CALIFORNIA AND MINNESOTA
California Vehicle Code Section 26708 (a) (1) provides that No persons shall drive any motor vehicle with an object or material placed, displayed, installed, affixed or applied upon the windshield or side or rear windows. Drivers in California should not use a suction mount on their windshield, side or rear windows. Note: this section of the California Vehicle Code applies to anyone driving in California, not just California residents. Minnesota State Legislature Statutes Section 169.71, subdivision 1, section 2 provides that A person shall not drive or operate with any objects suspended between the driver and the windshield other than sun visors and rearview mirrors and electronic toll collection devices. Note: this Minnesota Stature applies to anyone driving in Minnesota, not just Minnesota residents. TomTom Inc. bears no responsibility for any fines, penalties or damage that may be incurred by disregarding this notice. While driving in any state with windshield mounting restrictions, TomTom recommends the use of the supplied Adhesive Mounting Disk or its Alternative Mounting Kit, which includes multiple options for mounting TomTom devices on the dashboard and using the air vents. See www.tomtom.com for more information about this mounting option.

FCC Declaration of Conformity
Tested to comply with FCC Standards for Home or Office Use This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Responsible party in North America TomTom, Inc., 150 Baker Avenue Extension, Concord, MA 01742 Tel: 866 486-6866 option 1 (1-866-4-TomTom) Emissions information for Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This category II radiocommunication device complies with Industry Canada Standard RSS-310. Ce dispositif de radiocommunication de catgorie II respecte la norme CNR310 dIndustrie Canda.

CE Marking

This equipment complies with the requirements for CE marking when used in a residential, commercial, vehicular or light industrial environment.

R&TTE directive

Hereby, TomTom declares that this personal navigation device is in compliance with the essential requirements and other relevant provisions of the EU Directive 1999/5/EC. The declaration of conformity can be found here: www.tomtom.com/lib/doc/DoC_XL-2.pdf

WEEE directive

This symbol on the product or its packaging indicates that this product shall not be treated as household waste. In line with EU Directive 2002/96/EC for waste electrical and electronic equipment (WEEE), this electrical product must not be disposed of as unsorted municipal waste. Please dispose of this product by returning it to the point of sale or to your local municipal collection point for recycling.

C-tick

N14644 Z468 This product displays the C-tick to show it complies with relevant Australian and New Zealand regulations.

Warning for Australia

The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as gas stations, chemical storage depots and blasting operations.
Responsible party in Australia
TomTom Australia, Building 1, Suite 3, Level 3 , 3 Richardson Place, North Ryde NSW 2113, Australia Tel: +1700

This Document

Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice. TomTom shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the performance or use of this material. This document contains information

XL 330

Personal Navigation From A to B With An Extra-Wide Screen

TOMTOM MAP SHARE

Unique technology allows you to instantly modify street names, street direction, road speeds, turn restrictions and POIs on your own device and benet from others' veried corrections.

HELP ME! EMERGENCY MENU

Easily access local emergency providers such as police, re stations and hospitals. The Where Am I? feature pinpoints your exact location to provide to emergency providers.

XL 330 FEATURES

MAPS OF US & CANADA

EASYPORT MOUNT

PLUG & GO

SPOKEN INSTRUCTIONS

4.3 TOUCHSCREEN
PRELOADED POINTS OF INTEREST
ALWAYS UP-TO-DATE WITH TOMTOM HOME
TOMTOM LATEST MAP GUARANTEE

TRAFFIC READY

DAILY FUEL PRICESOPTIONAL SERVICE

XL 330 XL 330

WHY TOMTOM?

Easiest to Use

Plug & go Award-winning navigation software
Best Routing & Trafc Updates

QuickGPSx Trafc ready

US CAN

Best Maps

Latest Map Guarantee Correct your map and benet from others corrections with TomTom Map Share

Leader in Safety

Help Me! emergency resources menu Safety preferences
TomToms award-winning software means easy navigation from A to B. Switch on and go right out of the box. Just enter the address on the touchscreen and start driving anywhere in the US or Canada. TomTom guides you door-to-door with turn-by-turn spoken instructions. An extra-wide touchscreen helps you nd your way, worry-free. TomTom has the most accurate maps and with TomTom Map Share technology you can instantly modify street names, street direction, and POIs on your own device. The XL 330 is preloaded with millions of points of interest to enhance your traveling experience. And with the Help Me! menu, there are added safety features so you can easily access local emergency providers. The TomTom XL 330 is trafc-ready, so you can outsmart the trafc, wherever you go. Go condently.
Whats In The Box? XL 330 device EasyPort windshield mount Car Charger USB cable for charging and computer connection Dashboard mounting disk Documentation

FEATURE DESCRIPTIONS

TomTom Map Share: instantly modify street names, street direction, road speeds, turn restrictions and POIs on your own device and benet from others' corrections "Help Me!" Emergency Menu: easily access local emergency providers such as police, re stations and hospitals Maps of the US and Canada EasyPort mount: foldable, slim mount for easy portability POIs: easily nd gas stations, restaurants, hotels and more along your route. Customize by adding your own points of interest TomTom HOME: ensure that your TomTom is always up-to-date and access additional features with this free desktop software Latest Map Guarantee: if a new map is released within 30 days of purchase, download it for free from TomTom HOME Trafc ready: optional RDS-TMC trafc receiver accessory keeps you up-to-date on trafc events to minimize potential delays Daily Fuel Prices Optional Service: nd the lowest priced gas on your route

TECHNICAL SPECIFICATIONS

4.3 WQVGA touchscreen High sensitivity GPS receiver USB connection for charging, updates and downloads Battery (up to 3 hours operation) Weight: 6.6 oz Dimensions: 4.7 x 3.2 x 0.9 in

Part #: M6D00.127