Increase the effective range of your wireless devices!
Increase the range of your Wireless network! Attach these high gain antennas to your Linksys Wireless Broadband Router or Access Point, and increase both the effective strength of the outgoing signals, and the receive sensitivity for incoming signals. The added signal strength and sensitivity also improves close-range communication reliability because every packet comes through "loud and clear", reducing retransmissions due to weak signal reception errors. To install, just unscrew your current antennas, and attach the High Gain antennas in their place. There are no drivers to install, and no modifications to your setup are necessary. The Linksys High Gain Antenna Kit saves wiring costs and helps to build corporate wireless infrastructure by driving stronger signals into distant corners and hard-to-reach areas. And it's perfect for covering large areas in warehouse environments, public spaces, wireless hotspots, and outdoor venues -- anywhere you need extra coverage for your wireless network.
Increases the effective range of Linksys wireless devices
Stronger signal increases wireless coverage into hard-toreach areas and improves throughput by reducing retransmissions
Easy installation -simply replace your current antennas
Works with both Wireless-G and Wireless-B devices

Wireless

High Gain Antenna Kit Product Data for R-TNC Connectors

Model No.

High Gain Antenna Kit for R-TNC Connectors
Features Increase wireless signal of your Linksys Wireless-G or Wireless-B devices Omni-directional design for 360 degrees of coverage Easy to install, no configuration necessary 1-year limited warranty Specifications Model Number Peak Gain Frequency Range Voltage Standing Wave Ratio (VSWR) Polarization Direction Impedance Connector Environmental Dimensions WxHxD Unit Weight Operating Temp. Storage Temp. 11.22" x 0.55" (285 mm x 14 mm ) 1.48 oz. (0.04 kg) -4F to 149F (-20C to 65C) -22F to 167F (-30C to 75C) HGA7T 7 dBi 2.4GHz ~ 2.5GHz 1.92 Max. Linear Vertical Omni-directional 50 Ohms Nominal Reverse TNC
Operating Humidity 0% to 85% Non-Condensing
Linksys A Division of Cisco Systems, Inc. 121 Theory Irvine, CA 92617 USA E-mail: Web: sales@linksys.com support@linksys.com http://www.linksys.com

Works With:

WRT54GS WRT54G (Up to version 6) WAP54G BEFW11S4 WAP11 AS2TNC (Antenna Stand)

Package Contents

Two High Gain Antennas for R-TNC Connectors One Antenna Stabilizer
Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at www.linksys.com.
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.

HGA7T-DS-70921 AI

Product Data

Model No. Model No.