z-Start Pro Tuning Chart Yamaha YZ250 2-Stroke Suzuki RM250 2-Stroke
198-870 Manual Revision: 011108
z-Start Pro Engagement RPM Low Medium* High Low Medium* High
Engagement Rate Hard Hard Hard Soft Soft Soft
2 Inch Black Spring (C200L3) X
2 Inch Red Spring (C200M3)
1.5 Inch Red Spring (C150M3) X X X X X X

# of Balls 24 24

* Recommend initial settings Note: Empty ball slots must be evenly spaced around the pressure plate. The pattern for the 24 ball setup is 8 balls followed by 1 empty slot.
Note: RM 250 OWNERS: The OEM basket in the RM 250 has large radii at the top of the tangs that prevent full engagement of the tabs on the Rekluse pressure plate. Rekluse recommends running an aftermarket basket like Wisecos, which has a square corner at top of tang giving more engagement for the Rekluse pressure plate and preventing premature wear.

Suzuki RM125 94-01 Suzuki RM250 93-01

RS six pole stator

INSTRUCTIONS: Wire RED wire from RS stator to original BLACK/RED Wire WHITE wire to original WHITE/RED on stator The two yellow wires for the RS stator are provided for late model RMs that require a powervalve supply. If your bike does not have these two wires you have two options: Simply cut the wires and insulate them so they cannot short out. Use it for a low wattage light. To do this you must route the two yellow wires through the stator harness.
1672 Main St., Unit E, PMB 104, Ramona, CA 92065 (760)787-0094 Fax (760) 787-0313 E-mail: stator@adnc.com www.rickystator.com

090205

Ricky Stator