VIDEO SELECT Function

Press and hold the Number 0 (VIDEO SEL.) button on the remote control for over 5 seconds. ~ <COMPOSITE> or <RGB> will appear in the display. At this time, press the Number 0 (VIDEO SEL.) button shortly to select between <COMPOSITE> and <RGB>. ~ If Scart (RGB Input) is equipped for your TV, press the Number 0 (VIDEO SEL.) button to select RGB mode. You can get a better picture quality by using Scart setting. ~ If Scart (RGB Input) is not equipped for your TV, press the Number 0 (VIDEO SEL.) button to select COMPOSITE mode.
METHOD 4 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
Resolutions available for the HDMI output are 480p, 576p, 720p,1080i/1080p.
` This product operates in Interlace scan mode (576i, 480i) for component output. ` If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home
Cinema using the TV's remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC). logo (If your TV has an

` Please check the

logo, then it supports the Anynet+ function.)

HT-Z310-ENG-0226.indd 26

2008-02-26 7:27:38
HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. ~ HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD Home Cinema transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. ~ HDMI connection description HDMI connector - Supports video and digital audio data. - HDMI outputs only a pure digital signal to the TV. - If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen. ~ Why does Samsung use HDMI? Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD Home Cinema) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV. ~ What is the HDCP? HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made. ~ What is Anynet+? Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+ feature. - If your Samsung TV has an logo, then it supports the Anynet+ function. - If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on automatically and switch to HDMI mode. - If you turn on the player and press the Play button with a disc already inserted, the TV will immediately turn on and switch to HDMI mode.

~ If pressed once, PrESS PLAY is displayed and the stop position will be stored in memory. If the PLAY ( ) button or ENTEr button is pressed, playback resumes from the stop position. (This function works only with DVDs.) ~ If pressed twice, STOP is displayed, and if the PLAY ( ) button is pressed, playback starts from the beginning.
To temporarily pause playback, press the PAUSE (
~ To resume playback, press the PLAY ( ) button.
) button during playback.
Depending on the content of the disc, the initial screen may appear different. a copy protection system) recommendations.
` Pirated discs will not run in this player because it violates the CSS (Content Scrambling System :

HT-Z310-ENG-0226.indd 33

2008-02-26 7:27:52

MP3/WMA-CD PLAYBACK

Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
1. Place the MP3/WMA disc on the disc tray. ~ The MP3/WMA menu screen will appear and playback will start. ~ The appearance of the menu depends on the MP3/WMA disc. ~ WMA-DRM files cannot be played. In Stop mode, use the Cursor ,,, button to select the album, and then press the ENTEr button. ~ Use the Cursor , button to select the track. To change the album, use the Cursor ,,, button to select another album in Stop mode, and then press the ENTEr button. 4. Press the STOP (T) button to stop playback.
Depending on the recording mode, some MP3/WMA-CDs may not play. on the disc.
` Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded
To play a file icon in the screen,
~ Press the Cursor ,,, button when it is in Stop mode and select a desired icon from the top part of the menu. Music File Icon : To play music files only, select the Image File Icon : To view image files only, select the Movie File Icon : To view movie files only, select the All File Icon : To view all files select the Icon. Icon. Icon. Icon.

HT-Z310-ENG-0226.indd 34

2008-02-26 7:27:53

JPEG FILE PLAYBACK

Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Cinema.

Slide Mode

Place the JPEG disc on the disc tray.
~ Playback starts automatically. Each image is displayed for 5 seconds and then the next image is displayed.

PLAYBACK

Press the [,] button to skip to the next slide.
~ Each time the button is pressed, the slide moves backward or forward.

rotate/Flip Function

Press the Cursor ,,, button during playback.

button: Flip Vertically

button: Rotate 90 Counterclockwise Original Image

If the Disc has more than One Subtitle File
If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have to select your subtitle language as follows:
1. In Stop mode, press the Cursor , button, select the desired subtitle ( ) from the TV screen, and then press the ENTEr button. When you select the desired DivX file from the TV screen, the movie will be played normally.
DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time. MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio. 1. Supported Formats This product only supports the following media formats.If both video and audio formats are not supported, you may experience problems such as broken images or no sound. Supported Video Formats Format Supported Versions Supported Audio Formats Format Bit Rate Sampling Frequency MP3 80~384kbps WMA 56~128kbps AC3 128~384kbps 44.1/48khz DTS 1.5Mbps 44.1khz AVI DivX3.11~DivX5.1, XviD WMV V1/V2/V3/V7

44.1khz

~ DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps. ~ Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels (16:9). TV screen resolutions higher than 800 will not be supported. ~ When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback. Caption Function ~ You must have some experience with video extraction and editing in order to use this feature properly. ~ To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi ~ Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.

HT-Z310-ENG-0226.indd 37

2008-02-26 7:27:59
USING THE PLAYBACK FUNCTION
Displaying Disc Information
You can view disc playback information on the TV screen. Press the INFO button.
Depending on the disc, the disc information display may appear different. DTS, DOLBY DIGITAL, or PRO LOGIC.
` Depending on the disc, you can also select

CHAPTEr : Repeatedly plays the selected chapter. TITLE : Repeatedly plays the selected title. GrOUP : Repeatedly plays the selected group. rANDOM : Plays tracks in random order. (A track that has already been played may be played again.) TrACK : Repeatedly plays the selected track. DIr : Repeatedly plays all tracks in the selected folder. DISC : Repeatedly plays the entire disc. OFF : Cancels Repeat Playback.
To Select a repeat Playback Mode in the Disc Information Screen
1. Press the INFO button twice. Press the Cursor button to move to REPEAT PLAYBACK ( ) display. Press the Cursor button to select the desired Repeat Playback mode. ~ To select another album and track, repeat Steps 2 and 3 above. 4. Press the ENTEr button.
d OFF A- CHAP TITLE OFF B OFF A- TrACK DISC OFF
For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information display screen.

HT-Z310-ENG-0226.indd 40

2008-02-26 7:28:04

A-B repeat Playback

You can repeatedly play back a designated section of a DVD. 1. Press the INFO button twice. Press the Cursor button to move to REPEAT APLAYBACK ( ) display. Press the Cursor , button to select A- and then press the ENTEr button. ~ When the ENTEr button is pressed, the selected position will be stored in memory. A -? 4. Press the ENTEr button at the end of the desired segment. ~ The specified segment will be played repeatedly.

REPEAT : A

d To return to normal playback, press the Cursor , button to select
The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.

A TO B REPEAT ON

Step Function
Press the STEP button. ~ The picture moves forward one frame each time the button is pressed during playback.
No sound is heard during step motion playback.

HT-Z310-ENG-0226.indd 41

2008-02-26 7:28:05

Angle Function

This function allows you to view the same scene in different angles. 1. Press the INFO button. Press the Cursor button to move to ANGLE ( display. )
. Press the Cursor , button or numeric buttons to select the desired angle. ~ Each time the button is pressed, the angle changes as follows: 1/3 2/3 3/3 1/3
The Angle function works only with discs on which multiple angles have been recorded.
Zoom (Screen Enlarge) Function
This function allows you to enlarge a particular area of the displayed image. 1. Press the ZOOM button. Press the Cursor ,,, button to move to the area you want to enlarge. Press the ENTEr button. ~ Each time the button is pressed, the zoom level changes as follows: ZOOM X 1.5 ZOOM X 2 ZOOM X 3 ZOOM OFF

SELECT ZOOM POSITION

HT-Z310-ENG-0226.indd 42

2008-02-26 7:28:08

Bonus Group (HT-Z310/TZ312/TZ315 Only)
Some DVD-Audio discs have an extra bonus group that requires a 4-digit key number to access. See the disc packaging for details and the key number.

BONUS GROUP

When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically.

KEY NUMBER :

If you eject the disc, switch the power off, or unplug the player, you will need to re-enter the key number.
Navigating Pages (HT-Z310/TZ312/TZ315 Only)
During playback, press the.,, button on the remote control. ~ You can select the desired image from a DVD-Audio disc containing still images. ~ With some discs, you may not be able to select images.

HT-Z310-ENG-0226.indd 43

2008-02-26 7:28:09
Audio Language Selection Function
1. Press the INFO button twice. Press the Cursor , button or numeric buttons to select the desired audio language. ~ Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. EN 1/3 SP 2/3 Fr 3/3 EN 1/3
Subtitle Language Selection Function
1. Press the INFO button twice. Press the Cursor button to move to SUBTITLE ( display. )
. Press the Cursor button or numeric buttons to select the desired subtitle. EN 01/03 SP 02/03 Fr 03/03 OFF/03 EN 01/03
To operate this function, you can also press the AUDIO or SUBTITLE buttons on the remote control. ` Depending on the disc, the Subtitle and Audio Language functions may not be available.
Moving Directly to a Scene/Song
1. Press the INFO button. Press the Cursor , button or numeric buttons to select the desired title/track ( ) and then press the ENTEr button. Press the Cursor , button to move to the Chapter ( ) display. 4. Press the Cursor , button or numeric buttons to select the desired chapter and then press the ENTEr button. Press the Cursor , button to move to time ( display. )
. Press the numeric buttons to select the desired time and then press the ENTEr button.

HT-Z310-ENG-0226.indd 44

2008-02-26 7:28:10
Press the numeric buttons. ~ The selected file will be played. ~ When playing an MP3 or JPEG disc, you cannot use the Cursor , button to move to a folder. To move a folder, press the STOP (T) and then press the Cursor , button.

You can press the [,] button on the remote control to move directly to the desired title, chapter, or track. ` Depending on the disc, you may not be able to move to the selected title or time.

Using the Disc Menu

You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. 1. In Stop mode, press the MENU button. Press the Cursor , button or numeric buttons to move to Disc Menu and then press the ENTEr button. ~ When you select Disc Menu and it is not supported by the disc, the "This menu is not supported" message appears on the screen. Press the Cursor ,,, button to select the desired item. 4. Press the ENTEr button. d Press the EXIT button to exit the setup screen.
The disc menu display may be different depending on the disc.

HT-Z310-ENG-0226.indd 45

2008-02-26 7:28:12

Using the Title Menu

For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary. 1. In Stop mode, press the MENU button. Press the Cursor , button to move to Title Menu. Press the ENTEr button. ~ The title menu appears. d Press the EXIT button to exit the setup screen.
The Title menu display may be different depending on the disc.

HT-Z310-ENG-0226.indd 46

2008-02-26 7:28:13

USING BLUETOOTH

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a new technology that enables Bluetooth-compliant devices to easily interconnect with each other using a short wireless connection. ~ A Bluetooth device may cause a noise or malfunction, depending on usage. ~ When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Cinema System. ~ Electrical variation from electrical jamming by the wall, corner or office partitioning. ~ Electrical interference from the same frequency-band devices including medical equipment, microwave oven and wireless LAN. ~ Pair the Home Cinema System with the Bluetooth device while maintaining a close distance. ~ The further the distance is between Home Cinema System and Bluetooth device, the worse the quality. If the distance exceeds the Bluetooth operational range, the connection is lost. ~ In poor reception-sensitivity areas, the Bluetooth connection may not work properly. ~ The Home Cinema System has an effective reception range of up to 10 m in all directions if there are no obstacles. The connection will be automatically cut off if the distance is out of this range. Even within this range, the sound quality may be deteriorated by obstacles such as walls or doors.

SELECT

Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor. For a standard TV, select either 4:3PS or 4:3LB option according to personal preference. Select WIDE/HDTV if you have a widescreen TV. 4:3PS (4:3 Pan&Scan) Select this to play a 16:9 picture in the pan & scan mode on a conventional TV. ~ You can see the central portion of the screen only (with the sides of the 16:9 picture cut off). 4:3LB (4:3 Letterbox) Select this to play a 16:9 picture in the letter box mode on a conventional TV. ~ Black bars will appear at the top and bottom of the screen.
WIDE/HDTV Select this to view a 16:9 picture in the full-screen mode on your widescreen TV. ~ You can enjoy the widescreen aspect.
` Since DVD discs are recorded in various image formats, they will look different depending ` When using HDMI, the screen is automatically converted to Wide mode.
on the software, the type of TV, and the TV aspect ratio setting.
If a DVD is in the 4:3 ratio, you cannot view it in widescreen.

HT-Z310-ENG-0226.indd 52

2008-02-26 7:28:18
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Setup and then press the ENTER button. Press the Cursor % button to move to PARENTAL and then press the ENTER button. 4. Press the Cursor $,% button to select the desired rating level and then press the ENTER button. ~ If you have selected Level 6, you cannot view DVDs with Level 7 or higher. ~ The higher the level, the closer the content is to violent or adult material. 5. nter the password and then press the ENTER button. E ~ The password is set to "7890" by default. ~ Once the setup is complete, you will be taken to the previous screen. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

system setup

This function works only if a DVD disc contains the rating level information.

Setting the Password

You can set the password for the Parental (rating level) setting. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Setup and then press the ENTER button. Press the Cursor % button to move to PASSWORD and then press the ENTER button. 4. Press the ENTER button. Enter the password and then press the ENTER button. ~ Enter the old password, a new password, and confirm new password. ~ The setting is complete.

MOVE SELECT RETURN EXIT MOVE ENTER RETURN EXIT
The password is set to "7890" by default.
If you have forgotten the rating level password, do the following
~ While the player is in No DIsc mode, hold the DVD Players STOP (T) button for longer than 5 seconds. INITIAL appears on the display and all settings will return to the default values. ~ Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary.

HT-Z310-ENG-0226.indd 53

SETTING THE WALLPAPEr
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper. 1. During playback, press the PAUSE button when an image you like appears. Press the LOGO button.
~ COPY LOGO DATA will be displayed on the TV screen.
. The power will turn off and then back on.
~ The selected wallpaper will be displayed. ~ You can select up to 3 wallpaper settings.

COPY LOGO DATA

This function will not work when the HDMI output is 720p, 1080i or 1080p.
TO SELECT ONE OF THE 3 WALLPAPEr SETTINGS YOU'VE MADE
1. In Stop mode, press the MENU button. Press the Cursor % button to move to Setup and then press the ENTEr button. Press the Cursor % button to move to LOGO and then press the ENTEr button. 4. Press the Cursor $,% button to select the desired USEr, and then press the ENTEr button.
~ This selects one of the 3 wallpaper screens.
. Press the EXIT button to exit the setup screen. ~ OrIGINAL : Select this to set the Samsung Logo image as your wallpaper. ~ USEr : Select this to set the desired image as your wallpaper. d Press the rETUrN button to return to the previous level. d Press the EXIT button to exit the setup screen.

HT-Z310-ENG-0226.indd 54

2008-02-26 7:28:19
DVD Playback Mode (HT-Z310/TZ312/TZ315 only)
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode. 1. Press the MENU button while the disc tray is open. Press the Cursor % button to move to Setup and then press the ENTER button. Press the Cursor % button to move to DVD TYPE and then press the ENTER button. 4. Press the Cursor $,% button to move to DVD VIDEO and then press the ENTER button.

~ Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.

system

~ DVD VIDEO : Set to play the DVD video contents contained on a DVD audio disc. ~ DVD AUDIO :Set to play the default DVD audio.
` Powering off the main unit will automatically switch to the DVD Audio mode.
DVD Play mode is set to DVD Audio as factory default setting.

DviX (R) Registration

Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod.

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. In the SPEAKER SETUP, press the ENTER button again. 4. Press the Cursor ,,, button to move to the desired speaker and then press the ENTER button.
~ For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows : SMALL NONE. ~ For L and R, the mode is set to SMALL.
~ SMALL : elect this when using the speakers. S ~ NONE :Select this when no speaker is connected. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

MOVE CHANGE RETURN EXIT

Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 60).

HT-Z310-ENG-0226.indd 55

2008-02-26 7:28:20

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 1. 4. 5. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. Press the Cursor % button to move to DELAY TIME and then press the ENTER button. Press the Cursor ,,, button to move to the desired speaker and then press the ENTER button. P ress the Cursor , to set the Delay time. ~ You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.
d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Rear Speakers. Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

The DSP/EQ function is only available in STEREO mode. Press the PL II mode button to show STEREO on the display. ` This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX, tuner and Dolby Digital discs. ` When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and DSP/EQ function does not work.

DOLBY PrO LOGIC II MODE

You can select the desired Dolby Pro Logic II audio mode. Press the PL II MODE button. ~ Each time the button is pressed, the mode changes as follows. MUSIC CINEMA PrO LOGIC MATrIX STErEO MUSIC

PrO LOGIC II

~ MUSIC : When listening to music, you can experience sound effects as if you are listening to the actual performance. ~ CINEMA : Adds realism to the movie soundtrack. ~ PrO LOGIC : You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left and right speakers. ~ MATrIX : You will hear 5.1 channel surround sound. ~ STErEO : Select this to listen to sound from the front left and right speakers and the subwoofer only.
When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.

HT-Z310-ENG-0226.indd 60

2008-02-26 7:28:27
DOLBY PrO LOGIC II EFFECT
This function works only in Dolby Pro Logic MUSIC mode. 1. Press the. Press the PL II MODE button to select MUSIC mode. PL II EFFECT button.
. Press the , buttons to select the desired effect setting. ~ PANORAMA : You can select either 0 or 1. ~ C- WIDTH : You can select between 0 and 7. ~ DIMENS : You can select between 0 and 6.

SYSTEM SETUP

P.BASS function boosts the bass for a more powerful sound. 1. Press the P.BASS button to select P.BASS mode. Press the P.BASS button again to turn off the P.BASS mode.
The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen. ` The P.bass does not work with DSP/EQ or DOLBY PRO LOGIC ll modes. If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and the P. BASS function comes on.

HT-Z310-ENG-0226.indd 61

2008-02-26 7:28:28

LISTENING TO rADIO

remote Control
1. Press the TUNEr button to select the FM band. Tune in to the desired station. ~ Automatic Tuning 1 : When the [,] button is pressed, a preset broadcast station is selected. ~ Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations. ~ Manual Tuning : Briefly press the ,,. button to increase or decrease the frequency incrementally.

Main Unit

1. Press the FUNCTION button to select the FM band. Select a broadcast station. ~ Automatic Tuning 1 : Press the STOP (T) button to select PrESET and then press the [,] button to select the preset station. ~ Automatic Tuning 2 : Press the STOP (T) button to select MANUAL and then press and hold the [,] button to automatically search the band. ~ Manual Tuning : Press the STOP (T) button to select MANUAL and then briefly press the button to tune in to a lower or higher frequency. Press the MO/ST button to listen in Mono/Stereo. Each time the button is pressed, the sound switches between STErEO and MONO. In a poor reception area, select MONO for a clear, interference-free broadcast.

PrESETTING STATIONS

Example : Presetting FM 89.10 in the memory 1. Press the TUNEr button to select the FM band. Press the ,,. button to select 89.10. Press the TUNEr MEMOrY button. 4. Press the [,] button to select preset number. ~ You can select between 1 and 15 presets. Press the TUNEr MEMOrY button again. To preset another station, repeat steps 2 to 5. ~ To tune in to a preset station, press the [,] button on the remote control to select a channel.

HT-Z310-ENG-0226.indd 62

2008-02-26 7:28:30

ABOUT rDS BrOADCASTING

Using the rDS (radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.

rADIO

Description on rDS function
~ PTY (Program Type) : Displays the type of programme currently being broadcast ~ PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters. ~ RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters. ~ CT (Clock Time) : Decodes the real time clock from the FM frequency. ~ TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in progress.
RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak. displayed in all cases.

SYMPTOM Disc tray does not open. Playback does not start immediately when the Play/Pause button is pressed. Sound is not produced.
Check/Remedy Is the power cord plugged securely into the outlet? Turn off the power and then turn it back on. re you using a deformed disc or a disc with scratches on A the surface? Wipe the disc clean. o sound is heard during fast playback, slow playback, and N step motion playback. re the speakers connected properly? Is the speaker setup A correctly customized? Is the disc severely damaged? hen listening to a CD or radio, sound is output to the front W speakers (L/R) only. Select "PRO LOGIC II" by pressing PL II (Dolby Pro Logic II) on the remote control to use all six speakers. ake sure that the DVD disc is 5.1-CH compatible. M f you set C, SL, and SR to NONE in the speaker mode in the I audio setup of the setup screen, no sound is heard from the center speaker and the front left and right speakers. Set C, SL, and SR to SMALL. there "Dolby Digital 5.1 CH" mark on the disc? Dolby Is Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound. s the audio language correctly set to DOLBY DIGITAL 5.1I CH in the information display? s the remote control being operated within its operation I range of angle and distance? Are the batteries exhausted? ave you selected the mode(TV/DVD) functions of the H remote control (TV or DVD) correctly? Is the TV power on? Are the video cables connected properly? Is the disc dirty or damaged? A poorly manufactured disc may not be playable.
Sound can be heard only from a few speakers and not all six.
Dolby Digital 5.1 CH Surround Sound is not produced.
The remote control does not work.
Disc is rotating but no picture is produced. icture quality is poor and P picture is shaking.

HT-Z310-ENG-0226.indd 66

2008-02-26 7:28:34
SYMPTOM Audio language and subtitles do not work. Menu screen does not appear even when the menu function is selected. Aspect ratio cannot be changed.
Check/Remedy Audio language and subtitles will not work if the disc does not contain them. Are you using a disc that does not contain menus?
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function. urn off the power and hold the STOP (T) button on the T main unit for longer than 5 seconds (reset function). Using the RESET function will erase all stored settings. Do not use this unless necessary. While NO DISC message appears on the display of main unit, hold the main unit's STOP (T) button for longer than 5 seconds. INITIAL appears on the display and all settings will return to the default values. Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary.

Speaker

Front/Rear Center Subwoofer 3 140Hz~20KHz 140Hz~20KHz 45Hz~160Hz 86dB/W/M 86dB/W/M 86dB/W/M 133W 133W 135 W 266W 266W 270 W Front : 90 x 1020 x 92 mm (stand base : 280 x 280) Rear : 90 x 118 x 90 mm Center : 250 x 91 x 90 mm Subwoofer : 180 x 320 x 380 mm Front : 2.8 kg, Center : 0.6 kg Rear : 0.4 kg, Subwoofer : 4.5 kg
Speaker system Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights 72 5.1ch speaker system
Front/Rear Center Subwoofer 3 140Hz~20KHz 140Hz~20KHz 45Hz~160Hz 86dB/W/M 86dB/W/M 86dB/W/M 133W 133W 135 W 266W 266W 270 W Front/Rear : 90 x 1020 x 92 mm (stand base : 280 x 280) Center : 250 x 91 x 90 mm Subwoofer : 180 x 320 x 380 mm Front : 2.8 kg, Center : 0.6 kg Rear : 2.6 kg, Subwoofer : 4.5 kg

HT-Z310-ENG-0303.indd 72

2008-03-03 11:28:23
Front/Rear Center 140Hz~20KHz 140Hz~20KHz 86dB/W/M 86dB/W/M 166W 166W 332W 332W Front : 90 x 230 x 92 mm Rear : 90 x 137 x 92 mm Center : 300 x 101 x 91.5 mm Subwoofer : 180 x 320 x 380 mm Front : 0.6 kg, Center : 0.9 kg Rear : 0.5 kg, Subwoofer : 4.5 kg Subwoofer 3 45Hz~160Hz 86dB/W/M 170W 340W
Front/Rear Center Subwoofer 3 140Hz~20KHz 140Hz~20KHz 45Hz~160Hz 86dB/W/M 86dB/W/M 86dB/W/M 166W 166W 170W 332W 332W 340W Front : 90 x 1020 x 92 mm (stand base : 280 x 280) Rear : 90 x 137 x 92 mm Center : 300 x 101 x 91.5 mm Subwoofer : 180 x 320 x 380 mm Front : 3.0 kg, Center : 0.9 kg Rear : 0.5 kg, Subwoofer : 4.5 kg
Front/Rear Center Subwoofer 3 140Hz~20KHz 140Hz~20KHz 45Hz~160Hz 86dB/W/M 86dB/W/M 86dB/W/M 166W 166W 170W 332W 332W 340W Front /Rear: 90 x 1020 x 92 mm (stand base : 280 x 280) Center : 300 x 101 x 91.5 mm Subwoofer : 180 x 320 x 380 mm Front : 3.0 kg, Center : 0.9 kg Rear : 3.0 kg, Subwoofer : 4.5 kg *: Nominal specification - Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. - Weight and dimensions are approximate.

HT-Z310-ENG-0226.indd 73

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Region

North America

Country

CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA TRINIDAD & TOBAGO VENEZUELA COLOMBIA BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.K EIRE AUSTRIA SWITZERLAND RUSSIA KAZAHSTAN UZBEKISTAN KYRGYZSTAN TADJIKISTAN UKRAINE LITHUANIA LATVIA ESTONIA AUSTRALIA NEW ZEALAND CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM TURKEY SOUTH AFRICA U.A.E

CD-R MP3 Discs

getting star ted

CD-R JPEG Discs

DVDR/RW, CD-R/RW DivX Discs

HT-Z310-ENG-0226.indd 9

FrONT PANEL

AUX IN 1

FUNCTION BUTTON TUNING DOWN & SKIP ( ) BUTTON STOP (T) BUTTON PLAY/PAUSE ( ) BUTTON
TUNING UP & SKIP ( ) BUTTON VOLUME CONTROL OPEN/CLOSE BUTTON DISC TRAY USB CONNECTOR
AUX IN 1 CONNECTOR POWER( ) BUTTON

DISPLAY

FUNCTION DISPLAY REPEAT INDICATOR HDMI INDICATOR DISC INDICATOR DVD INDICATOR CD INDICATOR USB INDICATOR
SYSTEM STATUS DISPLAY RADIO FREQUENCY INDICATOR DOLBY DIGITAL INDICATOR PRO LOGIC INDICATOR LPCM INDICATOR
BLUETOOTH INDICATOR (HT-Z310/TZ312/TZ315 only) DTS DISC INDICATOR
DSP INDICATOR RTA INDICATOR RDS INDICATOR
` HT-Z210/TZ212/TZ215 doesn't support Bluetooth function.

HT-Z310-ENG-0226.indd 10

2008-02-26 7:27:03

rEAr PANEL

1 4

DESCrIPTION

AUX IN 2
The TX card enables communication between the main unit and the optional wireless receiver amplier. Connect the TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack. Connect to the 2CH analog output of an external device (such as a VCR) Use this to connect external equipment capable of digital output. Use the HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture. Connect to a TV with scart input jack. Connect a TV with Component video inputs to these jacks. Connect the FM antenna. Connect the front, center, rear speakers and subwoofer. The fan always revolves when the power is on. Ensure a minimum of 4 inches of clear space on all sides of the fan when installing the product.
TX CARD CONNECTION (WIRELESS) (HT-Z310/TZ312/TZ315 only) VIDEO OUTPUT JACK AUX IN 2 JACKS External Digital Optical Input Jack HDMI OUT JACK SCART JACK COMPONENT VIDEO OUTPUT JACKS FM 75 COAXIAL JACK
SPEAKER OUTPUT CONNECTORS

COOLING FAN

` HT-Z210/TZ212/TZ215 doesn't support wireless receivng function.

HT-Z310-ENG-0226.indd 11

2008-02-26 7:27:08
Tour of the Remote Control

DVD RECEIVER

DVD PORT

REMAIN

SUB TITLE

P.BASS

HT-Z310-ENG-0226.indd 12

2008-02-26 7:27:10

be possible depending on your brand of TV.
` If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Operation range of the remote Control
The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operated at a horizontal angle of up to 30 from the remote control sensor.

HT-Z310-ENG-0226.indd 14

2008-02-26 7:27:13

TV Brand Code List

Admiral (M.Wards) A Mark Anam AOC Bell & Howell (M.Wards) Brocsonic Candle Cetronic Citizen Cinema Classic Concerto Contec Coronado Craig Croslex Crown Curtis Mates CXC Daewoo Daytron Dynasty Emerson Fisher Funai Futuretech General Electric (GE) Hall Mark Hitachi Inkel JC Penny JVC KTV KEC KMC LG (Goldstar) Luxman LXI (Sears) Magnavox Marantz Matsui MGA Mitsubishi/MGA
56, 57, 58 01, 15 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 01, 18, 40, 48 57, 58, 81 59, 03 03, 18, 03, 05, 61, 82, 83, 03 59, 61, 02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 03 03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85 19, 03 06, 40, 56, 59, 66, 67, 15, 18, 50, 59, 56, 59, 67, 59, 61, 87, 88 03, 15, 01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 19, 54, 56, 59, 60, 62, 63, 65, 71 15, 17, 18, 48, 54, 59, 60, 62, 72, 89 40, 18, 40 18, 40, 59, 60, 75
MTC NEC Nikei Onking Onwa Panasonic Penney Philco Philips Pioneer Portland Proton Quasar Radio Shack RCA/Proscan Realistic Sampo Samsung Sanyo Scott Sears Sharp Signature 2000 (M.Wards) Sony Soundesign Spectricon SSS Sylvania Symphonic Tatung Techwood Teknika TMK Toshiba Vidtech Videch Wards Yamaha York Yupiteru Zenith Zonda Dongyang
18 18, 19, 20, 40, 59, 06, 07, 08, 09, 54, 66, 67, 73, 03, 15, 17, 18, 48, 54, 59, 62, 69, 90 15, 17, 18, 40, 48, 54, 62, 72 63, 66, 80, 91 15, 18, 59 40

r emote contr ol

06, 66, 67 17, 48, 56, 60, 61, 75 18, 59, 67, 76, 77, 78, 92, 93, 94 03, 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98 19, 61, 65 03, 40, 60, 61 15, 18, 19 15, 57, 64 57, 58 50, 51, 52, 53, 55 03, 18 18, 40, 48, 54, 59, 60, 62 61, 95, 18 03, 15, 18, 25 18, 40 19, 57, 63, 59, 60, 69 15, 17, 18, 40, 48, 54, 60, 58, 03, 54

HT-Z310-ENG-0226.indd 15

This section involves various methods of connecting the Digital Home Cinema to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the DVD Player
Place it on a stand or cabinet shelf, or under the TV stand. The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : or 32" TVs 2~2.4m (6~8feet) F For 55" TVs 3.5~4m (11~13feet)

Installing the Cradle Stand <Front/rear>
1. Insert the stand so that it fits into the hole as described in the figure.

<Center>

2. Turn the stand clockwise to lock it. (Turning it counter-clockwise will loosen from the hole.)
3. This is the completion of the stand installation.
` The speaker system may vary, depending on the model. Please check your speaker system to
see if it includes the correct package of "Front/rear & Center Speakers" corresponding to your model.
Installing the Wall Mount <Front/rear>
1. Insert the wall mount so that it fi ts into the rear hole of the speaker as in the figure.
2. Turn the wall mount counter clockwise to fix it. (This is the reverse direction to the cradle stand.)

HT-Z310-ENG-0226.indd 18

2008-02-26 7:27:20
Installing the Wall Mount (Con't) <Front/rear>
3. Put the hole cover on the hole of the speaker.

CONNECTIONS

4. Use a coin turn the hole cover clock wise to fix it. (Turning it counter-clock wise will loosen from the hole.)
5. Use the wall mount hole (bracket) to install the speaker on the wall.
see if it includes the correct package of "Front/rear & Center Speakers" corresponding to your model. ` To avoid the speakers accident falling and consequently damaging yourself and the equipment, make sure the speaker is hung safely.

Front/rear Tallboy Stand

Model Item Name Quantity 2EA 2EA 2EA 4EA 4EA/6EA Model SPEAKER STAND HT-TZ212/TZ312 STAND BASE SCREW (Large) SCREW (Small) Item Name SPEAKER STAND STAND BASE SCREW (Large) SCREW (Small) Quantity 4EA 4EA 4EA 8EA 8EA/12EA

HT-TZ215/TZ315

HT-TZ212/TZ312 HT-TZ212/TZ312 HT-TZ212/TZ312 HT-TZ212/TZ312 HT-TZ215/TZ315

SCREW (Large)

HT-TZ215/TZ315 HT-TZ215/TZ315 HT-TZ215/TZ315 HT-TZ212 HT-TZ312

STAND BASE

SCREW (Small)

HT-Z310-ENG-0226.indd 19

2008-02-26 7:27:26
How to Install the Speaker on the Stand
1. Turn the STAND upside-down and connect it to the STAND BASE. Insert two small SCrEWS into the two holes marked with arrows using a screwdriver as shown in the illustration. (HT-TZ215 : 2EA, HT-TZ315 : 3EA). Insert a large SCrEW into the hole on the rear of the Speaker STAND. 4. Connect the assembled stand to the SPEAKEr.

STAND BASE STAND

. Insert another large SCrEW into the hole on the rear of the speaker using a screwdriver as shown in the illustration. This is the successfully assembled speaker. Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.

If you select the THEATER
In case that you choose 'View TV', if you want to listen to TV sound through Digital In, you have to connect the optical cable between the TV and the Home Cinema.

HT-Z310-ENG-0226.indd 28

2008-02-26 7:27:42
CONNECTING AUDIO FrOM EXTErNAL COMPONENTS
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player.
Audio Cable (not supplied)

Audio OUT

1. Connect AUX IN 1 (Audio) on the Home Cinema to the Audio Out of the external component/MP3 player. Press the AUX button on the remote control to select AUX1 input. ~ You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD D.IN AUX 1 AUX 2 USB (BT AUDIO) FM.
HT-Z210/TZ212/TZ215 doesn't support Bluetooth function.

HT-Z310-ENG-0226.indd 29

2008-02-26 7:27:43
AUX2 : rear Panel OPTICAL : rear Panel
Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right.
Optical Cable (not supplied)
External Analog Component
External Digital Component
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR. 1. Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analog component. ~ Be sure to match connector colors. Press the AUX button on the remote control to select AUX 2 input. ~ You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD D.IN AUX 1 AUX 2 USB (BT AUDIO) FM.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital component. Press the AUX button on the remote control to select DIGITAL IN. ~ You can also use the FUNCTION button on the main unit. The mode switches as follows : DVD/CD D.IN AUX 1 AUX 2 USB (BT AUDIO) FM.

D *1/2 *1/4 *1/8 PLAY

No sound is heard during slow playback.
` Reverse slow playback does not work with CD.

Skipping Scenes/Songs

Press the [,] button. ~ Each time the button is pressed during playback, the previous or next chapter, track or directory (file) will be played. ~ You cannot skip chapters consecutively.

HT-Z310-ENG-0226.indd 39

2008-02-26 7:28:02

repeat Playback

Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). Press the rEPEAT button. ~ Each time the button is pressed during playback, the repeat playback mode changes as follows:
rEPEAT : CHAPTEr rEPEAT : TITLE rEPEAT : OFF rEPEAT : TrACK rEPEAT : GrOUP rEPEAT : OFF (HT-Z310/TZ312/TZ315 Only) rEPEAT : TrACK rEPEAT : DISC rEPEAT : OFF rEPEAT : rANDOM rEPEAT : TrACK rEPEAT : DIr rEPEAT : DISC rEPEAT : OFF

repeat Playback Options

CHAPTEr : Repeatedly plays the selected chapter. TITLE : Repeatedly plays the selected title. GrOUP : Repeatedly plays the selected group. rANDOM : Plays tracks in random order. (A track that has already been played may be played again.) TrACK : Repeatedly plays the selected track. DIr : Repeatedly plays all tracks in the selected folder. DISC : Repeatedly plays the entire disc. OFF : Cancels Repeat Playback.
To Select a repeat Playback Mode in the Disc Information Screen
1. Press the INFO button twice. Press the Cursor button to move to REPEAT PLAYBACK ( ) display. Press the Cursor button to select the desired Repeat Playback mode. ~ To select another album and track, repeat Steps 2 and 3 above. 4. Press the ENTEr button.
d OFF A- CHAP TITLE OFF B OFF A- TrACK DISC OFF
For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information display screen.

HT-Z310-ENG-0226.indd 40

2008-02-26 7:28:04

A-B repeat Playback

You can repeatedly play back a designated section of a DVD. 1. Press the INFO button twice. Press the Cursor button to move to REPEAT APLAYBACK ( ) display. Press the Cursor , button to select A- and then press the ENTEr button. ~ When the ENTEr button is pressed, the selected position will be stored in memory. A -? 4. Press the ENTEr button at the end of the desired segment. ~ The specified segment will be played repeatedly.

REPEAT : A

d To return to normal playback, press the Cursor , button to select
The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.

A TO B REPEAT ON

Step Function
Press the STEP button. ~ The picture moves forward one frame each time the button is pressed during playback.
No sound is heard during step motion playback.

HT-Z310-ENG-0226.indd 41

2008-02-26 7:28:05

Angle Function

This function allows you to view the same scene in different angles. 1. Press the INFO button. Press the Cursor button to move to ANGLE ( display. )
. Press the Cursor , button or numeric buttons to select the desired angle. ~ Each time the button is pressed, the angle changes as follows: 1/3 2/3 3/3 1/3
The Angle function works only with discs on which multiple angles have been recorded.
Zoom (Screen Enlarge) Function
This function allows you to enlarge a particular area of the displayed image. 1. Press the ZOOM button. Press the Cursor ,,, button to move to the area you want to enlarge. Press the ENTEr button. ~ Each time the button is pressed, the zoom level changes as follows: ZOOM X 1.5 ZOOM X 2 ZOOM X 3 ZOOM OFF

SELECT ZOOM POSITION

HT-Z310-ENG-0226.indd 42

2008-02-26 7:28:08

Bonus Group (HT-Z310/TZ312/TZ315 Only)
Some DVD-Audio discs have an extra bonus group that requires a 4-digit key number to access. See the disc packaging for details and the key number.

BONUS GROUP

When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically.

KEY NUMBER :

If you eject the disc, switch the power off, or unplug the player, you will need to re-enter the key number.
Navigating Pages (HT-Z310/TZ312/TZ315 Only)
During playback, press the.,, button on the remote control. ~ You can select the desired image from a DVD-Audio disc containing still images. ~ With some discs, you may not be able to select images.

HT-Z310-ENG-0226.indd 43

2008-02-26 7:28:09
Audio Language Selection Function
1. Press the INFO button twice. Press the Cursor , button or numeric buttons to select the desired audio language. ~ Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. EN 1/3 SP 2/3 Fr 3/3 EN 1/3
Subtitle Language Selection Function
1. Press the INFO button twice. Press the Cursor button to move to SUBTITLE ( display. )
. Press the Cursor button or numeric buttons to select the desired subtitle. EN 01/03 SP 02/03 Fr 03/03 OFF/03 EN 01/03
To operate this function, you can also press the AUDIO or SUBTITLE buttons on the remote control. ` Depending on the disc, the Subtitle and Audio Language functions may not be available.
Moving Directly to a Scene/Song
1. Press the INFO button. Press the Cursor , button or numeric buttons to select the desired title/track ( ) and then press the ENTEr button. Press the Cursor , button to move to the Chapter ( ) display. 4. Press the Cursor , button or numeric buttons to select the desired chapter and then press the ENTEr button. Press the Cursor , button to move to time ( display. )

To connect the Home Cinema System to a bluetooth device
Check if the Bluetooth device supports the Bluetooth-compliant stereo headset function. 1. Press the FUNCTION button on the front panel of the home cinema system repeatedly until the "BT AUDIO" appears. ~ The mode switches as follows : DVD/CD D.IN AUX 1 AUX 2 USB (BT AUDIO) FM. ~ You will see WAIT for 2 seconds and then rEADY on the front display of the Home Theater System. Select the Bluetooth menu on the Bluetooth device you want to connect. (refer to Bluetooth device's user manual) Connect. Select a Stereo headset menu on the Bluetooth device. ~ You will see a list of scanned devices. 4. Select "Samsung Home Theater" from the searched list. ~ When the Home Cinema System is connected to the Bluetooth Bluetooth device, the Home Cinema System will display Device "Connect" on the front display, followed by the name of the connected Bluetooth device. ~ The Home Cinema System connection is complete. Play music on the connected device. ~ You can listen to the music playing on the connected Bluetooth device over the home cinema system.
You may be required to enter a PIN code(password) when connecting the Bluetooth device to the home cinema system. If the PIN code input window appears, enter <0000>. The Home Cinema System may control play related function only when connected device supports the function. If connected device dose not support some play related function, the Home Cinema System can't control the device. TThe Home Cinema System only supports Middle Quality SBC data(up to 237kbps@48kHz), and does not support High Quality SBC data(328kbps@44.1kHz). HT-Z210/TZ212/TZ215 doesn't support Bluetooth function.

HT-Z310-ENG-0226.indd 47

To disconnect the Bluetooth device from the Home Cinema System
You can disconnect the Home Cinema System from the Bluetooth device (refer to Bluetooth devices user manual). ~ The Home Cinema System will be disconnected. ~ When the Home Cinema System is disconnected from the Bluetooth device, the Home Cinema System will display "DISCONNECT" on the front display.
To disconnect the Home Cinema System from the Bluetooth device
Press the FUNCTION button on the front panel of the home cinema system to switch from BT AUDIO to another mode. ~ The bluetooth device connected will wait a certain time for response from the home cinema system before terminating the connection. (Time to disconnection may differ, depending on the bluetooth device) ~ The currently connected device will be disconnected.

In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Home Cinema System and the Bluetooth device exceeds 10 m. If the distance is returned to the effective range or you restart the Bluetooth device, the Bluetooth connection can be restored. ` With some bluetooth devices, some functions may not work properly. ` HT-Z210/TZ212/TZ215 doesn't support Bluetooth function.

HT-Z310-ENG-0226.indd 48

2008-02-26 7:28:14
PLAYING MEDIA FILES USING THE USB HOST FEATUrE
You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel Home Cinema sound by connecting the storage device to the USB port of the Home Cinema. 1. Connect the USB device to the USB port on the front of the unit. Press the FUNCTION button on the DVD Player or the POrT button on the remote control to select the USB mode. ~ USB appears on the display screen and then disappears. ~ The USB MENU screen appears on the TV screen and the saved file is played. To stop playback, press the STOP (T) button.

Safe POrT removal

To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable. ~ Press the STOP (T) button twice in a row. The display will show rEMOVE USB. ~ Remove the USB cable.
To listen to your music files with 5.1 channel home cinema sound, you must set the Dolby Pro Logic II mode to Matrix. (See page 60) USB device connected to the USB port.
` In USB mode, you are not able to change the resolution or use the SETUP menu if there is no
During playback, press the [,] button. ~ When there is more than one file and you press the ] button, the next file is selected. ~ When there is more than one file and you press the [ button, the previous file is selected.

HT-Z310-ENG-0226.indd 49

2008-02-26 7:28:15

Fast playback

During playback, press the (,) button. ~ Each time you press either button, the playback speed will change as follows: 2x 4x 8x 32x Normal.

Compatible Devices

1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc in Windows (2000 or later) without additional driver installation.). MP3 Player: HDD and flash type MP3 players. Digital camera: Cameras that support USB Mass Storage v1.0. ~ Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation. 4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1. ~ You may experience a difference in playback quality when you connect a USB1.1 device. ~ For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. USB card Reader: One slot USB card reader and Multi slot USB card reader. ~ Depending on the manufacturer. the USB card reader may not be supported. ~ If you install multiple memory devices into a multi card reader, you may experience problems. If you use a USB extension cable, the USB device might not be recognized. Supported Formats Format Still Picture Music File name JPG MP3 WMA WMV Movie

MOVE SELECT RETURN EXIT

HT-Z310-ENG-0227.indd 51

2008-02-27 12:01:48

Setting TV Screen Type
Depending on your TV type (Widescreen or conventional 4:3), you can select the TV's aspect ratio. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Setup and then press the ENTER button. Press the Cursor % button to move to TV DISPLAY and then press the ENTER button. 4. Press the Cursor $,% button to select the desired item and then press the ENTER button. ~ Once the setup is complete, you will be taken to the previous screen. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

SELECT

Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor. For a standard TV, select either 4:3PS or 4:3LB option according to personal preference. Select WIDE/HDTV if you have a widescreen TV. 4:3PS (4:3 Pan&Scan) Select this to play a 16:9 picture in the pan & scan mode on a conventional TV. ~ You can see the central portion of the screen only (with the sides of the 16:9 picture cut off). 4:3LB (4:3 Letterbox) Select this to play a 16:9 picture in the letter box mode on a conventional TV. ~ Black bars will appear at the top and bottom of the screen.
WIDE/HDTV Select this to view a 16:9 picture in the full-screen mode on your widescreen TV. ~ You can enjoy the widescreen aspect.
` Since DVD discs are recorded in various image formats, they will look different depending ` When using HDMI, the screen is automatically converted to Wide mode.
on the software, the type of TV, and the TV aspect ratio setting.
If a DVD is in the 4:3 ratio, you cannot view it in widescreen.

HT-Z310-ENG-0226.indd 52

2008-02-26 7:28:18
Setting Parental Controls (Rating Level)

COPY LOGO DATA

This function will not work when the HDMI output is 720p, 1080i or 1080p.
TO SELECT ONE OF THE 3 WALLPAPEr SETTINGS YOU'VE MADE
1. In Stop mode, press the MENU button. Press the Cursor % button to move to Setup and then press the ENTEr button. Press the Cursor % button to move to LOGO and then press the ENTEr button. 4. Press the Cursor $,% button to select the desired USEr, and then press the ENTEr button.
~ This selects one of the 3 wallpaper screens.
. Press the EXIT button to exit the setup screen. ~ OrIGINAL : Select this to set the Samsung Logo image as your wallpaper. ~ USEr : Select this to set the desired image as your wallpaper. d Press the rETUrN button to return to the previous level. d Press the EXIT button to exit the setup screen.

HT-Z310-ENG-0226.indd 54

2008-02-26 7:28:19
DVD Playback Mode (HT-Z310/TZ312/TZ315 only)
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode. 1. Press the MENU button while the disc tray is open. Press the Cursor % button to move to Setup and then press the ENTER button. Press the Cursor % button to move to DVD TYPE and then press the ENTER button. 4. Press the Cursor $,% button to move to DVD VIDEO and then press the ENTER button.
~ Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.

system

~ DVD VIDEO : Set to play the DVD video contents contained on a DVD audio disc. ~ DVD AUDIO :Set to play the default DVD audio.
` Powering off the main unit will automatically switch to the DVD Audio mode.
DVD Play mode is set to DVD Audio as factory default setting.

DviX (R) Registration

Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod.

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. In the SPEAKER SETUP, press the ENTER button again. 4. Press the Cursor ,,, button to move to the desired speaker and then press the ENTER button.
~ For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows : SMALL NONE. ~ For L and R, the mode is set to SMALL.
~ SMALL : elect this when using the speakers. S ~ NONE :Select this when no speaker is connected. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

MOVE CHANGE RETURN EXIT

Setting the Audio

You can adjust the balance and level for each speaker. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. Press the Cursor % button to move to SOUND EDIT and then press the ENTER button. 4. Press the Cursor , button to select and adjust the desired item. Press the Cursor , button to adjust the settings.

HT-Z310-ENG-0226.indd 57

SETTING THE AUDIO
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Press the SOUND EDIT button and then press the Cursor , button.
Adjusting Front/rear Speaker Balance ` You can select between 00, -06, and OFF. ` The volume decreases as you move closer to 6. Adjusting Center/rear/Subwoofer Speaker Level ` The volume level can be adjusted in steps from +6dB to 6dB. ` The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
SETTING THE DrC (DYNAMIC rANGE COMPrESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTEr button. Press the Cursor % button to move to DrC and then press the ENTEr button. 4. Press the Cursor , to adjust the DrC. ~ When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller. d Press the rETUrN button to return to the previous level. d Press the EXIT button to exit the setup screen.
CHANGE RETURN EXIT MOVE ENTER RETURN EXIT

HT-Z310-ENG-0226.indd 58

2008-02-26 7:28:22

Setting the AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. 1. In Stop mode, press the MENU button. Press the Cursor % button to move to Audio and then press the ENTER button. Press the Cursor % button to move to AV-SYNC and then press the ENTER button. 4. Press the Cursor , button to select the AV-SYNC Delay Time and then press the ENTER button. ~ You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

Setting the HDMI Audio

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF. 1. In Stop mode, press the MENU button. Press the Cursor button to move to Audio and then press the ENTER button. Press the Cursor button to move to HDMI AUDIO and then press the ENTER button. 4. Press the Cursor , button to select ON or OFF and then press the ENTER button. ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home cinema speakers only. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

About characters shown in the display When the display shows PS,or RT signals,the following characters are used.
The display window cannot differentiate upper case and lower case letters and always uses upper case letters. The display window cannot show accented letters, <A,> for instance, may stands for accented <As> like <, , , , and.>

HT-Z310-ENG-0226.indd 63

2008-02-26 7:28:31
PTY (Program Type) indication and PTY-SEARCH function
One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.
To search for a program using the PTY codes Before you start, remember.
The PTY Search is only applicable to preset stations. To stop searching any time during the process, press PTY SEARCH while searching. There is a time limit in doing the following steps. If the setting is cancelled before you nish, start from step 1 again. When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control.
1. Press the PTY SEARCH while listening to an FM station. 2. Press the PTY- or PTY+ until the PTY code you want appears on the display.
The display gives you the PTY codes described to the right.
3. Press the PTY SEARCH again, while the PTY code selected in the previous step is still on the display.
The center unit searches 15 preset FM stations, stops when it nds the one you have selected, and tunes in that station. Display

NEWS AFFAIRS

Program Type
News including an announced opinion and report Several matters including a current incident, documentary, discussion and analysis. Information including weights and measures, returns and forecast, matters interesting the customer, medical information, etc. Sports Education Drama-Radio serial, etc. Culture-National or local culture including the religious problem, social science, language, cinema, etc. Natural science and technology Others-Speech, amusing program (quiz, game), interview, comedy and satirical play, etc. Pop music Rock music Current contemporary music considered to be easy listening.

Display

LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL A RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT
Light classical music- Classical music and instrumental and chorus music Heavy classical music-Orchestra music, symphony, chamber music and opera Other music - Jazz, R&B country music Weather Finance Childrens programmes Social affairs Religion Phone in Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary
INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M.O.R.M

HT-Z310-ENG-0227.indd 64

2008-02-27 10:53:52