RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BTS20 REPAIR SHEET
RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20
FIGURE A: TABLE SAW ASSEMBLY
The model number will be found on the data plate attached to the cabinet. Always mention the model number in all correspondence regarding your TABLE SAW or when ordering repair parts.
SEE FIGURE C SEE FIGURE B SEE FIGURE I

SEE FIGURE K

SEE FIGURE E

SEE FIGURE D

SEE FIGURE J SEE FIGURE F SEE FIGURE H SEE FIGURE G

WARNING:

Improper electrical repair of the table saw can result in damage to the drive system possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool require safety testing and should only be performed by a Ryobi Authorized Service Center. Page 2
FIGURE B: OUTFEED SUPPORT

KEY NO. 3 4

PART NUMBER 2

3 DESCRIPTION

OUTFEED SUPPORT.... 1 SCREW (1/4-20 x 1/2 in.).... 2 OUTFEED SUPPORT ROD... 2 OUTFEED LABEL.... 1

FIGURE C: BLADE GUARD

9 KEY NO. PART NUMBER 11 DESCRIPTION QTY. 10 1
PUSH NUT (5/16 in.).... 4 PIN (5/16 in. x 1-1/4 in.)... 1 ARM..... 1 TORSION SPRING.... 1 BLADE GUARD.... 1 WARNING LABEL... 1 PIN (5/16 in. x 1-3/4 in.)... 1 WARNING LABEL... 1 SCREW AND WASHER (M4 x 7mm).. 2 ANTI-KICK BACK PAWL... 2 SPACER CAP... 2 RIVING KNIFE.... 1 Page 3

FIGURE D: TABLE

KEY NO. 11
PART NUMBER 0131010316-0131010108-410331002

DESCRIPTION

THROAT PLATE.... 1 SCREW (#10-24 x 3/4 in.).... 1 BUSHING.... 2 OUTFEEDER BRACKET, RIGHT... 1 SCREW (#10-24 x 1/2 in.).... 4 CARRY HANDLE (RIGHT)... 1 AUXILIARY HANDLE BRACKET... 1 AUXILIARY HANDLE.... 1 HEX HD SCREW (M6 x 25mm)... 4 EXTENSION ROD INDICATOR... 1 SCREW (M4 x 10).... 1 Page 4
KEY NO. PART NUMBER 0131010224 0131010105
PARTS LIST - FIGURE D (CONT'D): TABLE
DESCRIPTION QTY. CLAMP PLATE, EXTENSION ROD.. 2 KNOB, EXTENSION ROD CLAMP PLATE... 2 NUT.... 2 WASHER (D8 x D16 x 0.8T)... 2 HEX HD SCREW (5/16-18UNC x 5/8 in.)... 2 END CAP (LEFT).... 1 MAIN RAIL.... 1 SCALE, MAIN RAIL.... 1 CARRY HANDLE (LEFT)... 1 SCREW (4 x 10mm)... 4 OUT FEEDER BRACKET (LEFT)... 1 SCREW (1/4-20UNC x 1/2 in.)... 4 BUMPER..... 2 TABLE.... 1
FIGURE E: EXTENSION TABLE

DESCRIPTION 9

KEY NO. 17 18
PART NUMBER 9131015330303 0131010313

11 QTY.

SCREW (#10-24UNC)... 2 SQUARE BAR.... 1 TEAR-DOWN LABEL... 1 SCREW AND WASHER (1/4-20UNC x 1/2 in.).. 2 SET-UP LABEL.... 1 SCALE, SMALL RAIL... 1 SCREW (#8-32UNC x 5/8 in.)... 1 SMALL RAIL.... 1 END CAP (RIGHT).... 1 JOINT BAR.... 1 RAIL WASHER.... 2 WASHER (D12.8 x D26 x 2.5T)... 2 MITER GAUGE HOLDER... 1 WASHER (D8 x D16 x 0.8T)... 2 HEX SCREW (5/16-18UNC x 3/8 in.).. 2 EXTENSION ROD... 2 EXTENSION ROD SCALE... 1 EXTENSION TABLE... 1

Page 5

FIGURE F: LOCKER BRACKET
64 SEE FIGURE I 51 KEY NO. 11 PART NUMBER 31 32
SCREW (1/4-20UNC x 3/8 in.)... 4 SUPPORTER.... 1 WASHER (D8 x D16 x 0.8T)... 2 NYLON NUT (M8).... 1 CRANK.... 1 TAPPING SCREW (#10-24UNC x 7/2)... 14 WASHER (D10 x D26 x 2T)... 1 NYLON NUT (M10).... 1 REAR LINKAGE.... 1 CLAMP PLATE... 2 NEEDLE ROLLER... 2 Page 6
PARTS LIST - FIGURE F (CONT'D): LOCKER BRACKET
KEY NO. PART NUMBER 0131010310 0131010312-9131015330101 DESCRIPTION QTY.
SCREW (#10-24UNC x 1/2 in.)... 1 PIVOT PLATE.... 2 PIVOT SUPPORT.... 2 LOCKER BRACKET... 1 FIX PLATE.... 1 HEX HD. SCREW (5/16-18UNC x 1-1/4 in.).. 2 RIVING KNIFE DECK.... 1 SHIM.... 5 RIVING CLAMP... 1 HEX NUT (5/16-18UNC)... 2 WASHER (3/8 x 20mm x 2T)... 1 NYLON NUT (3/8-16UNC).... 1 PIN (12 x 25mm).... 1 SHIM.... 2 GEAR BOX.... 1 SCREW AND WASHER (#10-24UNC x 1 in.).. 4 1/2in. SPACER.... 1 1/4in. SPACER.... 1 BLADE WASHER.... 2 BLADE (10 in. x 5/8 in. X 36T)... 1 ARBOR NUT (5/8-18NF-2B)... 1 DUST COVER.... 1 SCREW (1/4-20UNC x 5/8 in.)... 2 SCREW (1/4-20UNC x 5/8 in.)... 2 WRENCH..... 1 WRENCH..... 1 SPRING.... 1 SPACER.... 1 BRACKET.... 1 FRONT PANEL.... 1 WASHER (D10 x 34 x 1.6T)... 1 SCREW (#8-32UNC x 1-3/16 in.)... 2 BEVEL LOCKER.... 1 GEAR SHAFT (HEIGHT).... 1 NYLON NUT (1/4-20).... 1 FRONT HAND WHEEL... 1 WASHER (1/4 x 13 x 1.5)... 1 CAP, FRONT HAND WHEEL.... 1 WHEEL HANDLE.... 1 BOLT, HAND WHEEL... 1 SCREW (M4 X 10).... 2 BEVEL INDICATOR... 1 STAR WASHER (M4).... 1 SCREW (M4 x 6mm).... 1 SCREW (#10-24UNC x 1/2 in.)... 2 HEX NUT (M8).... 2 E-CLIP (E-15).... 1 BLOCK.... 1 NUT.... 2 DRIVE BLOCK.... 1 DRIVE PLATE.... 1 WASHER..... 1 SCREW (3/8-16UNC x 1/2 in.)... 1 NAME PLATE LABEL.... 1 Page 7

FIGURE G: MOTOR

10 KEY NO. 27 PART NUMBER AA0301030202
ARBOR..... 1 KEY (3 x 3 x 10mm).... 1 BEARING (6002LU, Z).... 1 BEARING BUSHING.... 1 C-CLIP (S15).... 1 REDUCTION GEAR... 1 C-CLIP (S13).... 1 NEEDLE BEARING (HK0910)... 1 GEAR BOX.... 1 BEARING (6201LLU CM,5C)... 1 ARMATURE ASSEMBLY... 1 INSULATION PLATE.... 1 INSULATION PLATE.... 1 BEARING (6200LU CM,5C)... 1 BAFFLE.... 1 SCREW AND STAR WASHER (M5 x 60).. 2 FIELD.... 1 WIRE NUT (TM-3, C5)... 2 POWER CORD.... 1 MOTOR HOUSING.... 1 SCREW AND WASHER (3/16-32UNF x 1-3/8 in.).. 4 SET SCREW (M5 x 10mm).... 2 BRUSH HOLDER ASSEMBLY.... 2 BRUSH ASSEMBLY... 2 BRUSH CAP.... 2 STRAIN RELIEF BUSHING (AVC SB6R-3, 6B3-2R).. 1 WIRE CLAMP (5/16 in. ACC-2.5)... 1 Page 8

FIGURE H: CABINET

KEY NO. 21 PART NUMBER 0131010203-0131010217-0131010222-410031710 0131010212-0171010216 0131010211-DESCRIPTION QTY. 24
BOLT, HAND WHEEL... 1 WHEEL HANDLE.... 1 CAP, BEVEL WHEEL... 1 WASHER (1/4 x 13 x 1.5)... 1 FRONT HAND WHEEL... 1 SCREW (#8-32UNC x 1-3/16 in.)... 1 NYLON NUT (1/4-20)... 1 SCREW ROD... 1 TORQUE SCREW (5/16-18UNC x 1/2 in.)... 2 LOCK SCREW (M6 x 25)... 4 CABINET.... 1 TORQUE SCREW (5/16-18UNC x 1-1/4 in.)... 2 CABLE MANAGEMENT (LEFT)... 1 END CAP.... 1 CABLE MANAGEMENT (RIGHT)... 1 SCREW (M4 x 20mm)... 8 CARRIAGE BOLT (5/16-18UNC x 1-1/2 in.)... 1 FENCE HANGER (REAR)... 1 KNOB, BLADE STORAGE... 1 SPACER, BLADE STORAGE... 1 FENCE HANGER (FRONT)... 1 Page 9
KEY NO. PART NUMBER 410451703 984406-984406-11 15
PARTS LIST - FIGURE H (CONT'D): CABINET

DESCRIPTION QTY.

SCREW (#8-16UNC x 3/4 in.)... 7 SWITCH.... 1 CABLE.... 1 SWITCH BOX... 1 CABLE CLAMP.... 1 WARNING LABEL... 1 WIRE CLAMP (5/16S)... 4 SCREW (#8-16UNC x 1/2 in.)... 5 SCREW (1/4-20UNC x 3/8 in.).... 2 PLATE.... 1 SPRING PIN (M4 x 24mm)... 1 BALL.... 1 REINFORCE PLATE.... 1 SWITCH KEY... 1

FIGURE I: MITER GAUGE

KEY NO. PART NUMBER 0131010109-DESCRIPTION QTY.
KNOB.... 1 WASHER.... 1 NYLON WASHER.... 1 LOGO LABEL... 1 MITER GAUGE HEAD... 1 HEX NUT.... 3 SCREW.... 3 MITER SCALE.... 1 MITER SLIDER WASHER... 1 SCREW (M6 x 8mm).... 1 CENTER PIN.... 1 SCREW.... 1 WASHER.... 1 MITER INDICATOR.... 1 INDICATOR DECK.... 1 INDEX PIN... 1 BAR..... 1 SCREW.... 2 Page 10

FIGURE J: STAND

KEY NO. 21 22
PART NUMBER A0131010230 A410011722
WHEEL CAP.... 2 SHOULDER BOLT.... 2 WASHER.... in. WHEEL.... 2 HEX SCREW (5/16-18UNC* 12.7mm).. 2 CAP.... 2 REAR LEG.... 1 NUT.... 2 SCREW (1/4-20UNC x 1/2))... 4 PAD.... 4 SLIDER.... 1 SLIDER FRAME.... 1 STAR WASHER (1/4 in.)... 2 HEX NUT (1/4 in.).... 2 LATCH.... 1 SCREW.... 1 LATCH COVER.... 1 LATCH BAR... 1 LATCH SPRING.... 1 HEX NUT (1/4 in.).... 1 PIN.... 2 HEX SCREW (1/4-20UNC x 2 in.)... 2 Page 11

KEY NO. PART NUMBER A410131731 A0131010917
PARTS LIST - FIGURE J (CONT'D): STAND
DESCRIPTION QTY. SLIDER.... 1 TORSION SPRING.... 1 FRONT LEG.... 1 HANDLE TUBE... 1 ADJUST SPRING.... 1 ADJUST RING.... 1 CARRIAGE BOLT (5/8-11UNC* 63.5mm).. 1 C-CLIP (CTW46).... 2 LINKAGE ROD... 1 PAD.... 4 PAD.... 4 WASHER.... 4 SCREW (1/4-20UNC x 1/2 in.)... 4 SLIDE LEG.... 1 SCREW.... 2 SPRING (REAR).... 1

FIGURE K: RIP FENCE

14 KEY NO. 21 PART NUMBER 0131010226 0131010104-DESCRIPTION 13 16

21 QTY.

NYLOCK SCREW (10#-24UNC x 1 in.)... 1 CLAMPER - B... 1 REAR DECK.... 1 PUSH ROD.... 1 ROLL PIN (1/8 X 3/4).... 1 SPRING.... 1 PIN (D6 X 33.7).... 1 RIP FENCE RAIL... 1 WASHER (D7 X D16 X 1.5T)... 2 SCREW (1/4in. - 20UNC x 5/8 in.).. 2 SCREW AND WASHER (M4 x 10 SEMS).. 1 SCALE INDICATOR... 1 SLIDER..... 2 SCREW (#8-32UNC x 9mm)... 2 PIN.... 1 CLAMPER - A... 1 BLOCK.... 1 FRONT BLOCK.... 1 SCREW (M3 x 8mm).... 1 ECCENTRIC ROLLER.... 1 LOCKING HANDLE.... 1 Page 12

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BTS20R-1 REPAIR SHEET
RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20R-1
FIGURE A SEE FIGURE C SEE FIGURE K

SEE FIGURE B

SEE FIGURE I

SEE FIGURE E

SEE FIGURE H

SEE FIGURE D

SEE FIGURE J SEE FIGURE F

SEE FIGURE G

The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your TABLE SAW or when ordering repair parts.

PARTS LIST FOR FIGURE B

Key No. Part Number A4 0131020303-Description OUTFEED SUPPORT ASSEMBLY OUTFEED SUPPORT.... 1 * SCREW (1/4-20 x 1/2 in.)... 2 OUTFEED SUPPORT ROD... 2 * STOP SCREW (M4 X 7 mm)... 1 Qty.
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 3

FIGURE C

PARTS LIST FOR FIGURE C
Key No. Part Number AA131011601 Description BLADE GUARD ASSEMBLY * PUSH NUT (5/16 in.).... 4 * PIN (5/16 in. x 1-1/4 in.).. 1 ARM.... 1 TORSION SPRING... 1 BLADE GUARD... 1 WARNING LABEL... 1 * PIN (5/16 in. x 1-3/4 in.).. 1 HAND WARNING LABEL... 1 * SCREW AND WASHER (M4 x 7 mm).. 2 ANTI-KICK BACK PAWL... 2 SPACER CAP... 2 RIVING KNIFE.... 1 Qty.
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 5

FIGURE D

PARTS LIST FOR FIGURE D
Key No. Part Number A131027002 Description Qty. Key No. Part Number 0131010225-0131010224 0131020102-33 Description Qty.
FRONT RAIL ASSEMBLY (INCLUDES FIG. D KEY NOS. 17-19 PLUS FIG. E KEY NOS. 7-11) THROAT PLATE..1 * SCREW (10-24 x 1/2 in. FLAT HD.).1 C-CLIP..2 EXTENSION ROD BUSHING..2 REAR OUTFEED BRACKET.2 * SCREW (M6 x 25 mm)..4 TABLE TILT HANDLE..1 * SCREW (10-24 x 25 mm)..4 EXTENSION ROD INDICATOR..1 * SCREW (M4 x 8 mm)..1 EXTENSION ROD CLAMPING PLATE.2
EXTENSION ROD CLAMPING PLATE.2 * SCREW (10-24 x 1/2 in.)..6 KNOB, EXTENSION ROD..2 SPECIAL NUT/RAIL WASHER.2 * WASHER (D8 x D16 x 0.8T)..2 * SCREW (5/16-18 x 14 mm HEX HD.)..2 END CAP (LEFT)..1 MAIN RAIL...1 SCALE, MAIN RAIL..1 * SCREW (1/4-20 x 1/2 in.)..4 BUMPER...2 TABLE...1

0131020307-0131010321

WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 7

FIGURE E

PARTS LIST FOR FIGURE E
Key No. Part Number A0131010806 0131020308-Description EXTENSION TABLE ASSEMBLY (INC. KEY NOS. 1-6 PLUS KEY NOS. 12-17) * SCREW (4 x 7 mm PAN HD.)..2 EXTENSION ROD.. 2 EXTENSION TABLE.. 1 TEAR-DOWN LABEL.. 1 * SCREW AND WASHER (1/4-20 x 1/2 in.). 2 SET-UP LABEL.. 1 SCALE LABEL, SMALL RAIL.. 1 * SCREW (8-32 x 5/8 in.). 1 Qty. Key No. 17 Part Number 9131025330302 Description Qty.
SMALL RAIL.. 1 END CAP (RIGHT).. 1 JOINT BAR.. 1 * WASHER (D11 x D28 x 2.5T).. 2 SPECIAL NUT/RAIL WASHER.. 2 MITER GAUGE HOLDER.. 1 * WASHER (D8 x D16 x 0.8T). 2 * HEX SCREW (5/16-18 x 3/8 in.).. 2 EXTENSION ROD SCALE.. 1
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 9

64 SEE FIGURE G 52 43

FIGURE F 18 20

PARTS LIST FOR FIGURE F

Key No. 19 Part Number 0181010343 Description Qty. Key No. 38 Part Number 0131010913 Description Qty.
* SCREW (1/4-20 x 3/8 in.).. 5 SUPPORTER.. 1 * WASHER (D8 x D16 x 1.5T).. 2 * HEX NUT (M8).. 3 CRANK... 1 * TAPPING SCREW (10-24 x 1/2 in.). 6 * WASHER (D10 x D26 x 2T). 2 * NYLON NUT (M10). 1 REAR LINKAGE.. 1 CLAMP PLATE.. 2 NEEDLE ROLLER.. 2 * SCREW (10-24 x 1/2 in.).. 10 PIVOT PLATE (FRONT).. 1 PIVOT SUPPORT (FRONT). 1 LOCKER BRACKET.. 1 FIX PLATE.. 1 * SCREW (5/16-18 x 1-1/4 in. HEX HD.). 2 RIVING KNIFE DECK.. 1 SHIM.. 5

RIVING CLAMP.. 1 * HEX NUT (5/16-18 x 1/2 in.). 2 * WASHER (3/8 x 20 mm x 2T).. 1 * NYLON NUT (3/8-16).. 1 * PIN (12 x 25 mm)... 1 SHIM.. 2 GEAR BOX... 1 * SCREW AND WASHER (10-24 x 1 in.). 4 1/2 in. SPACER.. 1 1/4 in. SPACER.. 1 BLADE WASHER... 2 BLADE (10 in. x 5/8 in. x 36T).. 1 * ARBOR NUT (5/8-18).. 1 DUST COVER... 1 * SCREW (1/4-20 x 16 mm). 2 * SCREW W/WASHER (1/4-20 x 16 mm). 2 WRENCH (SMALL).. 1 WRENCH (LARGE).. 1 SPRING... 1
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 11
PARTS LIST FOR FIGURE F CONTINUED
Key No. 57 Part Number 0131010312-411011003 Description Qty. Key No. Part Number Description Qty.
SPACER.. 1 BRACKET.. 1 FRONT PANEL.. 1 * WASHER (D10 x D26 x 2.0T).. 1 * SCREW (8-32 x 1-3/16 in.). 2 BEVEL LOCKER.. 1 GEAR SHAFT (HEIGHT). 1 * LOCK NUT (1/4-20).. 1 HANDWHEEL... 1 * FLAT WASHER (1/4 x 13 x 1.5).. 1 HANDWHEEL INSERT.. 1 WHEEL HANDLE... 1 SPECIAL HANDWHEEL SCREW.. 1 * SCREW W/WASHER (M4 x 10 mm). 2 BEVEL INDICATOR.. 1 * STAR WASHER (M4). 1 * SCREW (8-32 x 3/4 in.).. 2 * SCREW (10-24 x 1/2 in.).. 2 * HEX NUT (M8).. 3
C-CLIP (E-15)... 1 BLOCK... 1 NUT... 2 DRIVE BLOCK.. 1 DRIVE PLATE.. 1 WASHER... 1 * SCREW (3/8-16 x 22 mm).. 1 NAME PLATE (LOGO PLATE).. 1 * HEX LOCK NUT (8-32).. 5 * HEX NUT (M8).. 1 GROUNDING WIRE TO STAND. 1 "PU" PAD... 4 WEAR PAD.. 4 PIVOT SUPPORT (REAR).. 1 PIVOT PLATE (REAR).. 1 * HEX SOCKET SCREW WITH WASHER (M5 x 16 mm).. 2 * FLAT WASHER (D5 x D12 x 1.5T). 2 HEX KEY (1/4 in.)... 1
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 12

FIGURE G

NOTE: The assembly shown represents an important part of the double insulated system. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest Ryobi Authorized Service Center. For the service center nearest you call 1-800-5252579. 13

PARTS LIST FOR FIGURE G

Key No. Part Number A420010001 ADescription COMPLETE MOTOR ASSEMBLY ARBOR..1 KEY (3 x 3 x 10 mm).1 * BALL BEARING (6002LU, Z)..1 BEARING BUSHING.1 * C-CLIP (S15)..1 REDUCTION GEAR..1 * C-CLIP (S13)..1 * NEEDLE BEARING (HK0910)..1 GEAR BOX...1 * BALL BEARING (6201LLU CM,5C).1 ARMATURE ASSEMBLY..1 INSULATION PLATE.1 INSULATION PLATE.1 * BALL BEARING (6200LU CM,5C)..1 BAFFLE...1 * SCREW AND STAR WASHER M5 x 60 mm x 25 mm)..A04-03-07 (REV:03) Qty. Key No. 21 Part Number A410271701 Description Qty.

FIELD...1 WIRE NUT...2 MOTOR WIRE (14 AWG x 3C x 1380 mm).1 MOTOR HOUSING..1 * SCREW AND WASHER (3/16-32 x 1-3/8 in.)..4 * SET SCREW (M5 x 10 mm)..2 BRUSH HOLDER ASSEMBLY.2 BRUSH ASSEMBLY.2 BRUSH CAP..2 STRAIN RELIEF..1 WIRE CLAMP (5/16 in.).1 * SCREW (M4 x 8 mm)..1 * LOCK WASHER (M4)..1 ARBOR SHAFT ASSEMBLY..1 OPERATOR'S MANUAL
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 14

FIGURE H

PARTS LIST FOR FIGURE H
Key No. Part Number 0131010207-0131020214-0131020216-Description Qty. Key No. ` 35 Part Number 0131020215-410451703 984406-984406-Description Qty.
HANDWHEEL BOLT. 1 HANDWHEEL HANDLE. 1 BEVEL HANDWHEEL CAP. 1 * FLAT WASHER (1/4 x 13 x 1.5).. 1 FRONT HANDWHEEL.. 1 * SCREW (8-32 x 1-3/16 in.). 1 * LOCK NUT (1/4-20).. 1 SCREW ROD.. 1 * SCREW (5/16-18 x 1/2 in.). 2 * LOCK SCREW (M6 x 25 mm).. 4 CABINET... 1 * SCREW (5/16-18 x 55 mm).. 2 DATA PLATE (BTS20R-1).. 1 * CARRIAGE BOLT (5/16-18 x 1-1/2 in.). 1 FENCE HANGER (REAR).. 1 LOCK LABEL.. 1 WING NUT... 1 BLADE STORAGE SPACER. 1
FENCE HANGER (FRONT). 1 UNLOCK LABEL.. 1 * SCREW (8-16 x 3/4 in.).. 7 SWITCH.. 1 * SCREW (M4 x 18 mm PAN HD.). 4 SWITCH KEY.. 1 POWER CORD (14 AWG x 3C x 4.3 mm). 1 SWITCH BOX... 1 CORD CLAMP.. 1 WARNING LABEL.. 1 WIRE CLAMP (5/16). 4 * SCREW (8-16 x 1/2 in.).. 5 * SCREW (1/4-20 x 10 mm).. 2 PLATE... 1 * SPRING PIN (M4 x 24 mm).. 1 BALL.. 1 REINFORCE PLATE.. 1
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 16

FIGURE I

PARTS LIST FOR FIGURE I
Key No. Part Number AA0131010109-410102701 Description MITER GAUGE ASSEMBLY KNOB.... 1 WASHER... 1 NYLON WASHER.... 1 LOGO LABEL.... 1 MITER GAUGE HEAD... 1 HEX NUT.... 3 SCREW... 3 MITER SCALE LABEL... 1 MITER SLIDER WASHER... 1 * SCREW (M6 x 8 mm).... 1 CENTER PIN... 1 SCREW... 1 MITER INDICATOR... 1 INDICATOR DECK... 1 INDEX PIN... 1 BAR... 1 SCREW... 2 Qty.

WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 18

FIGURE J

PARTS LIST FOR FIGURE J
Key No. Part Number AA412011025 A0131010230 ADescription Qty. Key No. 34 Part Number 0131010323-0131020801 ADescription Qty.
STAND ASSEMBLY SHOULDER BOLT (M10 x 153.5 mm).2 WASHER (D13 x D32 x 1.5T)..in. WHEEL..2 FIXED END..6 CAP...2 REAR LEG...1 FIXED SPACER..6 TUBE...2 PAD...3 SCREW (1/4-20 x 1/2 in.)..4 PAD...4 WASHER (D65 x D10 x 0.8T)..4 SLIDE LEG..1 LOCK NUT (M12)..2 SLIDER...1 SLIDER FRAME..1 PIN..2
* STAR WASHER (1/4 in.)..2 * HEX NUT (1/4 in.)..2 LATCH..1 SCREW..1 LATCH COVER..1 LATCH BAR..1 LATCH SPRING..1 * HEX NUT (1/4 in.)..1 * HEX SCREW (1/4-20 x 2 in.)..2 SLIDER...1 SHOULDER BOLT..2 FRONT LEG..1 ADJUST SPRING..1 ADJUST RING..1 * CARRIAGE BOLT (5/8-11 x 88.9 mm).1 SHOULDER BOLT (M10 x 112.5 mm).2 WASHER (D12 x D26 x 1.5T)..6
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 20

FIGURE K

PARTS LIST FOR FIGURE K
Key No. Part Number A410491703 Description RIP FENCE ASSEMBLY * LOCK NUT (M6)..1 WASHER (D6.5 x D16 x 1.5T)..2 CLAMPER - B...1 COMPRESSION SPRING..1 PUSH ROD..1 WASHER (D16 x D25 x 1.5T)..2 REAR FENCE SLIDER..1 RIP FENCE RAIL..1 WASHER (D7 x D16 x 1.5T)..2 * SCREW (1/4-20 x 5/8 in.)..0131020101-94 Qty. Key No. 19 Part Number 0131020205 Description Qty.
* SCREW AND WASHER (M4 x 10 mm).1 SCALE INDICATOR..1 SLIDER...2 * SCREW (M4 x 6 mm)..2 HOOK...1 * SCREW (10-24 x 3/8 in.)..2 AXLE CLAMP..1 RING PADS..2 FENCE LOCKING HANDLE/ AUXILLIARY HANDLE..1 FRONT BLOCK..1
WARNING: Improper repair of tools can result in damage possibly causing electrical shock or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service Center. For the service center nearest you call 1-800-525-2579. * Standard Hardware Item May Be Purchased Locally 22