2006-2010 KAWASAKI ZX14 TiWinder INSTALLATION INSTRUCTIONS
Brocks Performance Products 4064 East Patterson Road Dayton, OH 45430 Phone: 937-912-0054 Fax: 937-912-0062
Installation Instructions for Brocks TiWinder Full Titanium Exhaust System
The Patent Pending TiWinder Series Exhaust System for the 2006-2010 Kawasaki ZX-14 is a high performance 4-2-1 elliptical side exit exhaust which replaces the stock headers, mid-pipes, and mufflers. STEP 1: CHECK PACKAGE CONTENTS:

Kawasaki ZX-14 (06-09)

TITANIUM SIDEWINDER EXHAUST
Description Header 1 & 2 Header 3 & 4 Secondary Collector Megaphone Baffle Stainless Steel Flange Collar Exhaust Flange Exhaust Flange Spring w/ Silicone Sleeve Spring Puller Radiator Bracket Megaphone Bracket 8MM Allen Bolt 8MM Washer Allen Bolt M6-15 Washer 6x13x1.0 RED Cap Instruction Manual Package w/ Label Actual Weight 7.35 w/o baffle Shipping Weight Zip-Tie Bar Code Label SKU S-EXPT5603 S-EXPT5601 S-TPTM623SWJ S-TPTM425SWYP EXC090 EXF119AL EXF118AL S-NM-SP-F60 3850-0056 SUSW05R SUSW05T CB-08020UCR PW-0082216UCR CB06015UCR PW-0061310UCR Quantity 1
22x14x10 8.70 lbs w/baffle 10.50 lbs SYB032
STEP 2: PRE-ASSEMBLE HEADERS, COLLECTOR, AND MID-PIPE TO INSURE PROPER FIT BETWEEN ALL PARTS: Brocks Performance carefully inspects each exhaust system prior to shipping, we recommend that you test fit your system prior to installation. Apply WD-40 to the joints to ease assembly, adjustment, and/or disassembly. STEP 3: REMOVE ZX-14 RIGHT AND LEFT DASHBOARDS: The right and left dashboards are held in place by three fasteners (Figure 4) which are removed with a No. 4 hex head wrench. Note that all dashboard and fairing fasteners have thin plastic washers located between the fastener head and the plastic body work. Be careful to save the plastic washers. To avoid losing fasteners and washers it is recommended that the installer place them in a container once they are removed.
Figure 4: ZX-14 Dashboard Removal (Right Side Shown)
STEP 4: REMOVE ZX-14 LOWER FAIRING: The lower fairing consists of separate right and left side panels, both of which should be removed. The locations of the bolts and plastic push pins holding the fairing in place are illustrated in Figure 5. Details are provided below. The plastic push pins is located in the front of the fairing (3), aft of the front tire, and holds the left and right panels together. Remove the plastic push pins using a thin blade screw driver to lift the rivet head. Then pull the rivet from the bodywork. This will release the right panel from the left panel. Remove the lower fairing fasteners & washers (1 & 2) on the right fairing panel with a No. 5 hex head wrench. Remove the upper fairing fasteners & washers (4, 5, & 6) on the right fairing panel with a No. 4 hex head wrench. Note that the top of the fairing incorporates slots into which hooks at the bottom of the mid fairing (red bodywork) fit. These hooks are shown in Figure 8. Pull the bottom of the lower fairing panel away from the bike and then downward to clear the hooks from the slots. The right side lower fairing should now separate easily from the mid-fairing. Repeat for the left side lower fairing.

Figure 5: Removal of ZX-14 Lower Fairing
STEP 5: REMOVE THE RIGHT AND LEFT FAIRING GRILLS
Remove fasteners and washers at positions 1 and 2 (Figure 6) for the right side fairing grill with a No. 5 hex head wrench. Remove fastener 3 with a No. 4 hex head wrench. The fairing grill is now held in place by three stoppers inserted into the mid-fairing (reference Figure 8). Pull the fairing grill away from the mid-fairing to release and remove. Repeat for the left fairing grill.
Figure 6: Removal of Fairing Grills
STEP 6: REMOVE THE TANK COVER: The tank cover is held in place by three fasteners (Figure 7). Fastener 1 is located on the right side, fastener 2 on the left side, and fastener 3 at the front of the cover. Note that fasteners 1 and 2 were removed in Step 6. Remove fastener 3 with a No. 5 hex head wrench. The tank is now held in place by stoppers and hooks located on the right and left side (refer to Figure 8). Pull the tank cover evenly in an outward direction on both sides to clear the stoppers and hooks. Then lift the tank cover to remove it from the bike frame. Figure 7: Removal of the Tank Cover
STEP 7: REMOVE THE LEFT AND RIGHT MID-FAIRINGS: Note that the turn signal wiring is connected to the electrical system using a quick connect. When removing the mid-faring take care not to damage the connector. Remove the plastic push pins 4 located under the front of the mid-fairing. Use a pin or small hex head wrench to push the center of the plastic push pins inward. The remove the rivet using a small flat head screwdriver. Remove fasteners at locations 1, 2, and 3 using a No. 4 hex head wrench, Figure 8. Pull the lower section of the fairing outward and then pull the fairing downward to release it from the front fairing. Be careful not to pull the fairing too far from the body. While holding the fairing, disconnect the flasher wiring at the quick disconnect. Now remove the fairing. If desired, the lower fairing (wing) may be removed. It is held in place by three easy to observe fasteners. Simply remove these fasteners with the appropriate hex head wrench to release the aft fairing from the frame.
Figure 8: Mid-Faring Removal
STEP 8: REMOVE THE STOCK RIGHT AND LEFT SIDE MUFFLER BODIES: Loosen the forward mid-pipe clamp using a ratchet and 12mm socket, Location 1. Remove the bolt at location 2 with a No. 6 hex head wrench (Right side only). Hold the back side nut with a 14 mm open end wrench. Remove the nut at location 3 using a ratchet with 14mm socket. Hold the fastener in place with a No. 6 hex head wrench. Support the muffler with your leg to release the pressure on the bolt. Remove the bolt. Pull the muffler body aft to release it from the forward collector.
STEP 9: REMOVE THE STOCK HEADER ASSEMBLY:
The procedure described below does not require removal of the radiator. However, the fit is tight and care should be taken to avoid damage to the radiator. Remove the radiator bracket holding the bottom of the radiator. Remove the header nuts using a ratchet with 12mm socket. Use of an extension will allow easier access to the header bolts. There are two bolts per header. Once the bolts are removed do not allow the header flange to fall and contact the radiator. Carefully move the flange to a position away from the radiator. Once all bolts are removed, carefully remove the header from the engine. Avoid contact with the radiator.

STEP 10: INSTALL THE BIG-CC HEADER MOUNT FLANGES: Install the four header mount flanges and spigots using nuts from the stock parts. Do not completely tighten the nuts. Leaving them loose will allow easier adjustment when the header pipes are fitted. Nuts will be tightened after the header pipes are installed. Install the springs into the flanges (this step should be done before installing the headers).
Orient Flanges on Engine as Shown
STEP 11: INSTALL THE RADIATOR BRACKET INCLUDED IN THE KIT: Remove the stock radiator bracket and install the provided radiator bracket using the m6-15 Allen bolt and m6 washers into the left side bottom of the radiator together with the cooling fan bracket (see the pictures below). The aft side of the bracket can be mounted using the stock bolt onto the pulsing cover.
STEP 12: INSTALL THE HEADER AND COLLECTOR ASSEMBLY: Install the header and collector assembly as a unit, without the mid-pipe. This allows easier manipulation of the assembly to insure proper fit, while avoiding contact with the radiator. Each header inlet will have one mount spring which secures it to the flange. With the exception of the 3rd header flange from the right side, all springs are easily installed after the headers are mounted on the flange spigots. I recommend installing the spring to this 3rd flange prior to installing the header pipes. The spring is located on the left side of the flange, not the right. Prior to installing the headers apply a small amount of Permatex Ultra Copper to the inside of each spigot. This will insure a high temperature seal is created. Be careful; avoid contact with the radiator while installing the header pipes. Once they are in place adjust the pipes as necessary to avoid contact with the radiator. Tighten the flange nuts. Do not over tighten. Max recommended torque is 10 ft-lb. Now attach the springs from the flanges to the header pipes. Do not attach the springs holding the collector to the headers. The headers (1) are attached to the spigots by a spring (2). There is a tight fit between the bottom of the header assembly and the radiator (3), but the two parts should have adequate clearance so that no contact is made. Adjust as required.

STEP 13: INSTALL THE ZIP TIE: The water hose to the oil cooler is very close to the #2 header tube; use the zip-tie to keep the hose in place and away from #2 headers as shown below. Note: Do not tighten the zip-tie too much.
STEP 14: INSTALL THE MID-PIPE AND MUFFLER: Slip the forward end of the mid-pipe onto the aft end of the collector. Remove the right side step bracket, locate the megaphone bracket inside of the step bracket and install them onto the original position together using the stock bolts. Do not tighten fully. Locate the megaphone inlet onto the exit of the mid-pipe and install into the megaphone bracket using M8-20 Allen bolt and washer. Do not fully tighten until final adjustments have been made. Adjust the assembly by hand as required and then attach mount springs. Tighten the megaphone mount bolt and megaphone bracket mount bolts securely. Trim the right side lower fairing as required and install using the stock bolts. NOTICE You have now completed installation of the TiWinder Titanium Exhaust System. If you did not purchase a Power Commander, then replace the fairings in reverse order from the fairing removal. If you have a Power Commander installed then you should contact Brocks Performance Products for the appropriate fuel map. It is highly recommended that a Power Commander (or similar mapping system) and appropriate map be installed with any non-stock exhaust system, including both full and slip-on systems. DO NOT START BIKE UNTIL FAIRINGS HAVE BEEN INSTALLED AND YOU HAVE INSURED A MINIMUM INCH CLEARANCE BETWEEN THE EXHAUST COMPONENTS AND ALL BODYWORK Failure to insure proper clearance may result in burned plastic and you burn it, its your fault. Brocks exhaust system is designed to provide the appropriate clearance. If the minimum clearance is not obtained, remove the springs on the exhaust system, loosen the muffler hanger strap, and adjust until proper clearance is achieved. I personally had no problems and did not need to make any final adjustments.
Brocks Performance Products are designed for Closed-Course Racetrack use ONLY! For more information go to www.BrocksPerformance.com, click: Installation Instructions email: Advice@BrocksPerformance.com or call the office at 937-912-0061 Brocks Performance Products policies and warranty information: www.BrocksPerformance.com, click: Policies

Brocks Performance Products 4064 E. Patterson Road Dayton, OH 45430 Phone: 937-912-0054 Fax: 937-912-0062
2006-2009 ZX-14 AIRBOX BLOCK OFF Pair valve block off is to prevent deceleration pop. 1. Remove right side fairing and tank cover in front of gas tank. 2. Remove hose from air box and cut the tapered end straight, see fig. 1.
Fig 1. 3. Place red plastic block off cap all the way into grommet as shown in fig. 2.
Fig. 2. 4. Insert hose all the way into block off cap as shown in fig. 3. (Make sure hose is in tight).
Fig. 3. 5. Replace fairings.
Brocks Performance Products are designed for Closed-Course Racetrack use ONLY! For more information go to www.BrocksPerformance.com, click: Installation Instructions Email: Advice@BrocksPerformance.com or call the office at 937-912-0061 Brocks Performance Products policies and warranty information: www.BrocksPerformance.com, click: Policies

Ninja ZX-14 Ninja ZX-10R Ninja ZX-6R Ninja 650R Ninja 250R Concours 14 Z1000 Versys Covers
Ninja, ZZR, ZXTM, VersysTM and ConcoursTM are trademarks Kawaski. Price and specifications are subject to change without notice or liability. Availability is subject to production, stocking and demand. Manufacturers suggested retail prices shown.
For more Kawasaki Genuine Accessories, visit Kawasaki.com.
For performance parts, see Kawasaki.com or the Kawasaki Performance Parts Catalog.
* Professional rider on a closed course
1 Chrome Passenger Grab Handle
Give your passenger additional comfort with style OEM part with gleaming triple plated chrome finish Requires bolt and color matched trim (sold separately)

2 Chrome Bar Ends

OEM parts with gleaming triple-chrome-plated finish Requires one damper for each bar end Package quantity: 1
4 Chrome Driver Footpeg Mount / Heelguard
OEM parts with gleaming triple plated chrome finish

7 Passenger Grab Handle

Give your passenger additional comfort with this rear grab handle Made from durable aluminum, each handle includes color matched bodywork for a factory installed look Includes all required hardware

Ninja ZX-14 (06-10)

Footpeg Mount, Left Footpeg Mount, Right Heel Guard, Left Heel Guard, Right K35063-0234 K35063-0235 K55020-0211 K55020-0212 $129.95 $129.95 $69.95 $69.95
Passenger Grab Handle Bolt Qty. 2 Trim, Titanium (10) Trim, Red (10) Trim, Black (06, 09) Trim, Green (09) Trim, Orange (09) Trim, Silver (08) Trim, Blue (08) Trim, Red (08) Trim, Black (07) Trim, White (07) Trim, Blue (07) Trim, Red (06) Trim, Blue (06) K46075-1104 130BA0835 36040-0059-740 36040-0059-A5 36040-0059-H8 36040-0059-17P 36040-0059-17L 36040-0059-17M 36040-0059-19A 36040-0059-10N 36040-0059-17K 36040-0059-667 36040-0059-723 36040-0059-234 36040-0059-235 $209.95 $1.18 $63.96 $63.96 $63.85 $63.80 $63.80 $63.80 $63.80 $63.80 $63.80 $63.80 $63.80 $63.80 $63.80
Chrome Bar Ends Damper K13042-1006 92092-1018 $42.95 $9.66
Titanium (10) Red (10) Black (06, 09) Green (09) Orange (09) Silver (07-08) Red (08) Blue (08) Black (07) White (07) Blue (07) Red (06) Blue (06) 99994-0053-740 99994-0053-A5 99994-0053-H8 99994-0053-17P 99994-0053-17L 99994-0053-17M 99994-0053-10N 99994-0053-19A 99994-0053-17K 99994-0053-667 99994-0053-723 99994-0053-234 99994-0053-235 $191.48 $189.68 $184.95 $184.95 $184.95 $184.95 $184.95 $199.17 $199.17 $199.17 $199.17 $184.95 $184.95
Chrome Passenger Footpeg Mount
OEM parts with gleaming triple plated chrome finish Package quantity: 1

Center Stand

Ideal for maintenance, this center stand mounts permanently to your ZX-14 Includes all required hardware
Left Right K35063-0353 K35063-0354 $169.95 $169.95
Center Stand 99994-0052 $229.95

Spoiler Windshield

Tinted spoiler screen offers 1 of additional height and special shape for better airflow
Spoiler Windshield K46001-339 $134.95

sport Ninja ZX-14

Seat Cowls - NEW!
Give your motorcycle a custom appearance with these unique seat cowls Each cowl is constructed of high quality ABS plastic and features factory matched paint Replaces stock rear seat Includes all necessary hardware

b b c d e f g h

Green (08-10) Black (10) Orange (09) Black (09) Black (08) Blue (08) Green (06-07) Ebony (06-07) Blue (07) Red (07) Yellow (06)
99996-1358-777 99996-1358-660 99996-1358-17L 99996-1358-H8 99996-1358-17K 99996-1358-723 99996-1348-777 99996-1348-H8 99996-1348-723 99996-1348-234 99996-1348-10A
$119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95

Tall Windshield

sport Ninja ZX-10R
Get additional wind protection Made from durable 3mm hard-coated polycarbonate to help resist scratching, this lightly tinted windshield installs quickly with stock hardware Double bubble design offers 2 of additional height Tall Windshield (04-05) Tall Windshield (06-07) K46001-330 K46001-331 $149.95 $159.95

Vinyl Tank Cover

Protect your motorcycles finish Constructed of premium grade automotive vinyl with black felt backing to prevent scratching, these covers dont restrict refueling and eliminate paint scratches due to belt buckles, zippers, etc.

Ninja ZX-10R (04-05)

Vinyl Tank Cover K99994-948 $42.95
* For performance parts, see Kawasaki.com or the Kawasaki Performance Parts Catalog.

c d e f

Get additional wind protection Made from durable 3mm hard-coated polycarbonate to help resist scratching, this lightly tinted windshield installs quickly with stock hardware Double bubble design offers 2 of additional height
Ninja ZX-6R (05-06), Ninja ZX-6RR (05-06)
Tall Windshield K46001-331 $159.95
Tank and Knee Pads - NEW!
Semi-transparent adhesive gel resin tank and knee pads protect your paint and feature the Ninja ZX-6R logos

Ninja ZX-6R (10)

a Tank Pad b Knee Pads (pair) 168TPT-0024 168TPT-0025 $59.95 $44.95

sport Ninja ZX-6R

Red (10) Black (10) Black (09) Blue (09) Green (09) Yellow (08) Black (07-08) Silver (07-08) Red (07-08) Blue (07-08) Green (07-08) Blue (06) Titanium Silver (06) Ebony (05-06) Green (05-06) Titanium Silver (05) Red (05) Blue (05, 07)
99996-1361-234 99996-1361-660 99996-1361-17K 99996-1361-25V 99996-1361-777 99996-1354-789 99996-1354-H8 99996-1354-17M 99996-1354-234 99996-1354-723 99996-1354-777 99996-1348-10E 99996-1348-740 99996-1348-H8 99996-1348-777 99996-1348-725 99996-1348-724 99996-1348-723
$177.40 $177.40 $159.95 $159.95 $159.95 $124.95 $124.95 $124.95 $124.95 $124.95 $124.95 $114.95 $114.95 $119.95 $119.95 $114.95 $114.95 $119.95

Seat Cowl

Give your motorcycle a custom appearance with these unique seat cowls Each cowl is constructed of high quality ABS plastic and features color matched paint Includes all necessary hardware

Ninja 650R

a b c d e 2008 Green 2008 Black 2008 Red 2007 Red 2007 Blue* 2006 Black 2006 Silver*

*Item Not Shown

K53065-106 K53065-104 K53065-105 K53065-102 K53065-103 K53065-101 K53065-100
$249.95 $249.95 $249.95 $249.95 $249.95 $249.95 $249.95

Low Seat - NEW!

Top quality OEM base, foam and cover Reduces height by 30mm and width by 20mm

Ninja 650R (09-10)

Spoiler Screen - NEW!
Unique spoiler shape and 2 of additional height offers increased wind protection

Spoiler Screen

214WSC-9005

$139.95

Sport Screen - NEW!
Sporty bubble shape and 1 of additional height offers reduced buffeting
Sport Screen 214WSC-9011 $139.95

sport Ninja 650R

090SEC0008

$359.95

Spoiler windshield is lightly tinted and features hard coated polycarbonate to resist scratching Unique spoiler shape offers 1 increased height for added comfort and wind protection

Ninja 650R (06-08)

Spoiler Windshield K46001-335 $149.95

Rear Trunk

Perfect for commuters and those long rides, this rear trunk offers 29 liter capacity Made from durable ABS construction, this trunk is large enough to accommodate a standard full face helmet Rear trunk measures: 15 X 15 X 12 Requires trunk brackets (K16160-0016)
Rear Trunk Trunk Brackets Frame Grip K16160-0004 K16160-0016 99999-0104 $139.95 $179.95 $99.95

Fairing Guards

*European model shown Made from a durable plastic material, these fairing guards offer protection and styling Tested and approved to factory standards to help reduce the possibility of bodywork damage in case of tip-over
Fairing Guards K53020-370 $259.95

Tall and Short Seats

Developed with the Kawasaki rider in mind, this seat is made to OEM specifications and is available with optional heights of plus 1 or minus 1 This replacement seat is light and features an embroidered Kawasaki logo
1 Taller 1 Shopper K53001-188 K53001-189 $429.95 $429.95

U Lock

Hardened tool steel lock is designed to fit perfectly beneath the seat
U Lock K28000-403 $119.95
1 Team Monster Graphics Kit
Durable adhesive vinyl Team Monster Kit with all the Road Racing Teams sponsor logos
Tribal/Flame Graphics Kit
Durable adhesive vinyl graphics kits with a tribal/flame pattern Highly detailed pattern has a black and dark smoke background with silver tribal flames and your choice of red, green, blue, purple or pink pinstriped outlines

Ninja 250R (08-10)

Team Monster Graphics Kit K56062-166 $42.95

Ninja 250R

Green (08-10) Black (08, 10) Red (08, 10) Blue (10) Blue (09) Black (09) Red (09) Blue (08) 99996-1360-777 99996-1360-H8 99996-1360-15I 99996-1360-15W 99996-1360-620 99996-1360-15Q 99996-1360-H1 99996-1360-15D $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95 $119.95
Black/Silver/Red Black/Silver/Green Black/Silver/Blue Black/Silver/Purple Black/Silver/Pink K56062-179 K56062-180 K56062-181 K56062-182 K56062-183 $59.95 $59.95 $59.95 $59.95 $59.95

sport Ninja 250R

MotoGP Team Replica Graphics
Durable vinyl graphics kits replicate the Monster Energy Kawasaki MotoGP bike including all of the sponsor decals Hopkins and West rider logos and numbers are also included
MotoGP Graphics Kit K56062-177 $49.95

Bubble Screen - NEW!

Durable, scratch resistant material and bubble shaped windscreen offers great looks and additional wind protection
Bubble Screen 204WSP-0016 $119.95

Navigation Bracket

Solid, easy to install bracket with universal 4 hole mounting plate for easy attachment of most GPS devices GPS unit not included

Concours (08-10)

Concours 017BRU0025 $69.95
Durable hard coated 5mm polycarbonate construction 70mm taller than stock windshield with approximately 22% more surface area

Concours (08-09)

Tall Windshield K46001-340 $139.95

Low Gel Seat

Gel seat absorbs vibration and improves weight distribution 30mm lower than stock

sport Concours 14

K53001-197

$539.95

Durable ABS construction Lockable with quick release base Measures: 15 L X 18 W X 12 H, 39 liter capacity (fits full face helmet) Requires color matched trim

Concours

Rear Trunk 2010 Blue Trim 2009 Black Trim 2009 Red Trim 2008 Silver Trim Backrest Pad K16160-0017 131LUU-9005 131LUU-0011 131LUU-0020 K16160-0010 130SBC-0002 $269.95 $179.95 $179.95 $179.95 $172.95 $69.95

Large Rear Trunk

Durable ABS Construction Lockable with quick release base Measures 16 long x 22 wide x 13 high 47 liter capacity Requires color matched trim Backrest pad sold separately
a b Large Rear Trunk 2010 Blue Trim 2009 Black Trim 2009 Red Trim 2008 Silver Trim Backrest Pad 232LUU-0020 131LUU-9004 131LUU-9003 131LUU-9002 131LUU-9001 130SBC-0003 $229.95 $159.95 $159.95 $159.95 $159.95 $64.95
Trunk Bag (Small trunk only)
Rigid, water resistant bag with compartments for business equipment and shoulder straps
Trunk Bag 100LUU0002 $89.95

Saddlebag Liners

Interior bags keep everything in place Semi-rigid, water resistant bag set with compartments for business equipment in one of the bags and shoulder straps
Saddlebag Liners, Pair K53001-270 $132.95

1 AirDeflectors

Adjustable deflectors allow you to force the air stream away from your body and pull warm air from the engine for some added warmth and comfort

Concours (86-06)

Air Deflectors K53003-020 $89.95

2 SideFairingDeflectors

Side fairing deflectors feature a simple bolt-on design for easy installation for added wind protection
Side Fairing Deflectors K99996-1103 $94.95

Tank Protector

Manufactured from premium grade automotive vinyl, this premium tank protector features felt backing to prevent scratches and a heat embossed Concours logo Half tank coverage area

Tail Bag

Durable Cordura construction Measures 8 W x 14 H Black with gray trim
Tail Bag K99994-336A $50.95
Give your Concours style and function Backrest offers extra support for your passenger for those long rides while the rear rack gives you extra storage Each is made of strong aluminum construction and feature a durable black epoxy powder coat finish NOTE: Both backrest and rear rack require Rack Adapter (K53021-083A) Rear rack maximum load capacity: 5 lbs.
Backrest Rear Rack Rack Adapter K53043-052A K53020-083A K53021-083A $109.95 $139.95 $114.95

Backrest & Rear Rack

sport concours

K99994-918

$42.95

Engine Case Rings - NEW!

High impact, abrasion resistant plastic covers for left and right engine covers

Z1000 (10)

Engine Case Rings (pair)

123CPS-0057

$129.95

Fuel Tank Guards - NEW!

Semi transparent gel resin adhesive pads protect the painted surfaces of the fuel tank Tank pad with key fob guard or pair of knee pads sold separately
Tank Pad with Key fob Guard 168TPT-0028 Knee Pads (pair) 168TPT-0029 $59.95 $44.95

3 WindDeflector - NEW!

Scratch-resistant smoked wind deflector with 40mm of additional height offers additional wind protection
Wind Deflector 203WSC-0013A $129.95

Seat Cowl - NEW!

White Black 16146-0124-25Y 16146-0124-660 $250.87 $250.87

sport Z1000

Engine Case Insert
Engine case insert featuring a machined flying K logo will help protect your motorcycles engine case Choose between billet aluminum with black anodized finish or an extremely durable plastic Delron

Z1000 (03-06)

Delron Aluminum K53020-357 K53020-355 $64.95 $45.95

Engine Guard

Give your engine extra protection Kawasaki lettering adorn this engine guard featuring a sturdy billet aluminum mount with a plastic slider
Engine guard K53020-361 $234.95
Get additional wind protection Made from durable 3mm hard coated polycarbonate to help resist scratching, this tinted windshield installs quickly with stock hardware Approximately 2 taller than stock
Tall Windshield K46001-326 $64.95

K99994-947

Belly Pan

Durable polycarbonate material with color-matched paint Mounting hardware included

Z1000 (08-09)

Belly Pan, Black Belly Pan, White 011BST-0011 011BST-0014 $439.95 $439.95
Tank & Knee Pads - NEW!
Semi transparent gel resin adhesive pads protect the painted surfaces of the fuel tank Tank pad or pair of knee pads sold separately

Versys (10)

Tank Pad Knee Pads 168TPT-0033 168TPT-0034 $39.95 $39.95

Vario Windshield - NEW!

Base windshield is wider and taller than stock Unique adjustable spoiler controls airflow to suit the rider 12.5 tall, 13.5 wide
Vario Windshield, Clear 205WSC-9003 $199.95

Tall Windshield - NEW!

Taller, Wider windshield for improved wind protection 13.5 tall, 13.5 wide
Tall Windshield, Clear 203WSC-9015 $159.95

sport Versys

Windshield is wider and taller than stock to offer additional wind protection 13 Tall x 15 Wide (stock windshield is 11 Tall x 12 Wide)

Versys (08-09)

Tall Windshield K46001-338 $129.95
Custom molded seat is 2 lower, 1 narrower than stock and has a gel comfort layer for additional comfort
Low Gel Seat K53001-225 $519.95

Tank Pad

Semi transparent gel resin tank pad with molded Versys logo protects the painted surface from zippers and buckles
Tank Pad K16161-0015 $44.95

K28000-271

$124.95
Perfect for commuters and those long rides, this rear trunk offers 29 liter capacity Made from durable ABS construction, this trunk is large enough to accommodate a standard full face helmet Requires trunk brackets (K16160-0023) Not for use with saddlebags
Rear Trunk Trunk Brackets Blue Decal Green Decal K16160-0004 K16160-0023 079TPT-0004 079TPT-0008 $139.95 $172.95 $19.95 $19.95

Cowling Guard

Solid mounting brackets with high density ABS reduce the possibility of bodywork damage in case of a tip-over
Cowling Guard 123CPS0019 $249.95

Hard Saddlebags

34 liter quick release saddlebags are molded specially for the Versys Requires Bracket kit (K16160-0024) Requires trim cover set Not for use in conjunction with Tail Trunk Measures: 20.7 X 12.5 X 15.5
Saddlebag set Saddlebag brackets Trim Cover Set, 2009 Green Trim Cover Set, 2009 Blue* Trim Cover Set, Black* 131LUU-0004A K16160-0024 131LUU-0018 131LUU-0019 K16160-0007 $599.95 $219.95 $119.95 $119.95 $114.95

Versys

017BRU0027

$79.95

1 Premium ZX-6R/ZX-10R Cover
Durable, breathable 600 denier Sur Last fabric with softened interior surface offers the maximum protection for your motorcycle Tailored specifically to fit the ZX-10R and ZX-6R, this cover features heat shields in exhaust areas and metallic silk-screened logos

3 Deluxe Cover - NEW!

Constructed of water resistant polyester and a unique shielded vent system that allows built-up moisture to vent Features a reinforced grommet at the bottom hem which allows the cover to be locked to the bike for added security Heat resistant panels in the exhaust area Oversized fit allows for easy installation and removal Deluxe Cover K99995-843B $169.95

Dust Cover

Keep your motorcycle dust free with this soft, lightweight and durable cover featuring the innovative DustStop material Perfect for indoor or carport use Not heat or water resistant Full Length K99995-867 $99.95
NINJA ZX-6R, NINJA ZX-10R
Premium Cover K99995-869 $139.95

Concours 14 Cover

Storage cover manufactured from Sur Last fabric is water repellent and breathable Fits with or without accessory luggage or windshield

Concours Cover

Constructed of water resistant polyester Oversized fit allows for easy on and off Unique shielded vent system allows built-up moisture to vent Reinforced grommet at the bottom hem allows the cover to be locked to the bike Heat resistant panels in the exhaust area

Concours 14 (08-09)

Concours 14 Cover K99995-871 $164.95
Concours Cover K99995-845A $174.95

sport covers