ProConnect Series

Integrated K V M 2-Port Switch
Use this Guide to install: KVM2KIT

Installation Guide

Integrated KVM 2-Port Switch
COPYRIGHT & TRADEMARKS Copyright 2003 Linksys, All Rights Reserved. ProConnect is a trademarks of Linksys. Linksys is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. FCC STATEMENT The ProConnect Integrated KVM 2-Port Switch has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resx idential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment or device Connect the equipment to an outlet other than the receivers Consult a dealer or an experienced radio/TV technician for assistance
EC Declaration of Conformity (Europe) In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and Amendment Directive 93/68/EEC, this product meets the requirements of the following standards: EN55022 Emission EN55024 Immunity

IG-KVM2KIT-112102NC KL

Table of Contents
System Requirements Step 1: Install the Integrated KVM 2-Port Switch Step 2: Use the Hot Key Combinations for the Integrated KVM 2-Port Switch Specifications Contact Information
This Installation Guide is meant to help you install the Integrated KVM 2-Port Switch quickly and easily. For additional information, visit the Linksys website at www.linksys.com

System Requirements 3

Console One VGA, SVGA or Multisync Monitor Capable of the Highest Resolution You Will Be Using on Either Computer One PS/2 Keyboard One PS/2 Mouse Either Computer One VGA, SVGA, or Multisync Monitor Capable of the Resolution You Will Be Using on Either Computer One PS/2 Keyboard One PS/2 Mouse

Highest

Step 1: Install the Integrated KVM 2-Port Switch
A. Power down the monitor and computers before you install the KVM Switch. Unplug the power cords of any computers that have the Keyboard Power On function; otherwise, the KVM Switch will receive power from those computers. Then make sure all devices you are connecting are properly grounded.
Note: The connectors on the built-in cables are color-coded to match the appropriate ports on your computers; however, double-check each connectors icon before you make the physical connection.
B. Connect the monitors cable to the monitor port on the KVM Switch. C. Connect the PS/2 keyboards cable to the PS/2 keyboard on the KVM Switch. D. Connect the PS/2 mouses cable to the PS/2 mouse port on the KVM Switch.
E. Use the PC 1 cable for the first PC you are connecting. Plug the cables monitor connector into PC 1s monitor port. F. Plug the PC 1 cables keyboard connector into PC 1s keyboard port. G. Plug the PC 1 cables mouse connector into the PC 1s mouse port. H. Use the PC 2 cable for the second PC your are connecting. Repeat steps EG. I. Turn on the monitor and computers. The PC 1 LED will light up automatically, and PC 1 will be displayed on the monitor.

Step 2: Use the Hot Key Combinations for the Integrated KVM 2-Port Switch
The KVM Switch is controlled by hot key commands, also known as keyboard shortcuts. Hot key commands allow you to conveniently access either computer directly from the keyboard. Using hot keys, you can manually toggle between computers or automatically cycle between computers at a preset time interval. There are three basic hot key combinations: Toggle to the Other Computer Initiate Auto Scan Mode Initiate Auto Scan Mode and Change the Scan Interval Toggle to the Other Computer To toggle between the two computers, press and release the Scroll Lock key twice.
Your installation is complete. To learn about the hot key combinations used to control the KVM Switch, proceed to step 2.
Initiate Auto Scan Mode The Auto Scan feature automatically cycles the KVM between both computers, so you can monitor their activity without manually switching between computers. The factory default scan interval is three seconds. To initiate Auto Scan Mode, press and release the left Shift key, and then press and release the right Shift key.
Initiate Auto Scan Mode and Change the Scan Interval If you want to change the can interval, use the following hot key combination: 1. 2. 3. 4. Press and release the left Shift key. Press and release the right Shift key. Press and release the s key. Press and release the n key, n being a number from 1-4. Refer to the Scan Interval Table.
To exit Auto Scan Mode, press the spacebar.
For example, to initiate Auto Scan Mode and change the scan interval to 10 seconds, use this hot key combination:

Contact Information

For help with installation or operation of this product, contact Linksys Technical Support at one of the phone numbers listed in the Technical Support insert or Internet addresses below:
E-mail Europe United Kingdom & Ireland Latin America U.S. and Canada
europe-support@linksys.com uks@linksys.com latam-soporte@linksys.com support@linksys.com
The letter n represents 1-4, depending on the scan interval you want. Refer to the Hot Key Summary Table.
For unlisted regions or updated contact information please visit the website below: Web http://www.linksys.com/international

Specifications

Model Number: Standards: Protocol: Ports: Keyboard: Mouse: Monitor: 1 PS/2 female - Console 2 PS/2 male - CPU 1 PS/2 female - Console 2 PS/2 male - CPU 1 HD15 female - Console 2 HD15 male - CPU PC 1, PC 2 3, 5, 10, or 20 seconds (3 is default) KVM2KIT PS/2 Microsoft PS/2 Protocol

LEDs: Scan Interval:

w w w. l i n k s y s. c o m
Copyright 2003 Linksys, All Rights Reserved. Printed in the USA.

ProConnect Series

Integrated KVM 2-Port Switch
s o Computer Control Tw le Console from a Sing
Save Desktop SpaceUse a Single Monitor, Keyboard, and Mouse for Two PCs
he Linksys ProConnect Integrated KVM 2-Port Switch lets you take instant command over two PCsall from a single keyboard, mouse, and monitor! For your convenience, it even comes with built-in cables to meet all your connection needs. Switch between PCs with a quick, two-key action, or use the automatic scan feature to easily monitor both computers. The KVM Switch eliminates those pesky, cableswapping duties while saving you desktop space and hardware costs. Because it doesnt use software, the KVM Switch is compatible with all major desktop and notebook computers. Its the perfect choice for the home, office, or anywhere else you work with two PCs at the same time.
ProConnect Integrated KVM 2-Port Switch Model Number: KVM2KIT

Benefits

Easily Control Two PCs from a Single Keyboard, Mouse, and Monitor Toggle between PCs with Quick, Hot Key Combinations Convenient, Built-in Cables for a UserFriendly, All-in-One Design Save Desktop Hardware Costs Space, Energy, and

Features

Supports a Screen Resolution of up to 1920 x 1440 Complete, Plug-and-Play Monitor Support Compatible with Virtually All PS/2 Keyboards and Mice Caps Lock, Number Lock, and Scroll Lock Settings Automatically Recalled for Each PC Hot-PluggableSwap out Your Keyboard, Mouse, or Computers at Any Time No Software Required
Free Technical Support24 Hours a Day, 7 Days a Week, Toll-Free US Calls 1-Year Limited Warranty

Specifications

Model Number Standards Protocol Ports KVM2KIT PS/2 Microsoft PS/2 Protocol Keyboard: Mouse: Monitor: 1 PS/2 female - Console 2 PS/2 male - CPU 1 PS/2 female - Console 2 PS/2 male - CPU 1 HD15 female - Console 2 HD15 male - CPU

Package Contents

ProConnect Integrated KVM 2-Port Switch Integrated KVM 2-Port Switch One Quick Installation One Registration Card

Minimum Requirements

Console One VGA, SVGA, or Multisync Monitor Capable of the Highest Resolution You Will Be Using on Either Computer One PS/2 Keyboard One PS/2 Mouse Either Computer VGA, SVGA, or Multisync Video Card One PS/2 Port for the Keyboard One PS/2 Port for the Mouse
LEDs Resolution Scan Interval
PC 1, PC 2 up to 1920 x 1440 3, 5, 10, or 20 seconds (3 is default)

Environmental

Dimensions 3.125" x 3.0" x 0.875" (79.4 mm x 76.2 mm x 22.2 mm) 11.8 oz. (0.33 kg) FCC Class B, CE Mark 32F to 122F (0C to 50C ) -4F to 140F (-20C to 60C)
Unit Weight Certifications Operating Temp. Storage Temp.

Linksys

World Headquarters: 17401 Armstrong Ave. Irvine, CA 92614 USA E-mail: sales@linksys.com support@linksys.com http://www.linksys.com
Operating Humidity 0% to 80%, Non-Condensing Storage Humidity 0% to 80%, Non-Condensing
Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at www.linksys.com.

DS-KVM2KIT-082702NC JL