VESTAX PMC-05 PRO II

SPECIFICATIONS
INPUT: Phono inputs: stereo (RIAA 42dBv; RCA) x 2; Line inputs: stereo (10dBv; RCA) x 2; Mic. inputs: (54dBv; Jack 1/4 inch) x 2; OUTPUT: Line out: stereo (-7dBm; RCA) x 2; Monitor headphone out: stereo (58mW; Jack 1/ 4 inch). CHANNEL: 2/4 Channels; (2 stereo, 2 mono); Channel 1 + 2: Input switch (multi position transformer switch) phono/ line; Input trim; 2-band equaliser low +/ 12 dB, high +/-12dB; Bal. L-R; Signal input level LED bar display; Input fader (User replaceable); 3-position curve selector switch. Channel 3+4 (Mic): Volume control (each); 2-band equaliser low +/12dB, high +/-12dB. MASTER: Output level control; Monitor: Monitor level fader; Monitor selector fader: Ch1-Ch2; Crossfader: Channel 1-2; Crossfader curve adjustment, crossfader reverse switch. FREQU. RESPONSE: 25-25000 Hz +/- 3dB; S/N RATIO: >75 dB THD:< 0,01% DIMENSIONS: (WxHxD) 262 x 103 x 320 mm; WEIGHT: 3,6 Kg POWER SUPPLY: Vestax DC-15A
VESTAX PMC-05 PRO II Mixing Instrument

Hiphop, Scratch, Studio

FEATURES
2/4 channel mixing instrument with 2 phono and 2 line inputs. DoublePanel design with hidden features Switchable input fader curve
ACCESSORIES / USER REPLACEABLE PARTS
Eight position input selector switch User replaceable input and cross fader Monitor crossfader for PFL mixing
Input fader: Input fader IF-05PCV Input transformer switch: IS-05 PRO Cross fader: CF-05PCV

Studio type PCP layout

SELLING POINTS: Top level mixer with Vestax quality and features The standard for hip-hop / scratch mixing Exclusive double panel system with 576 different settings of fader and switch modes Complete plain frontpanel

PMC-05 PRO II

1. I HAVE A RECORD THAT HAS POOR MID RANGE FREQUENCIES IN THE RECORDING, BUT THE PMC 05 PRO MK 2A ONLY HAS BASS AND TREBLE CONTROLS. WHAT SHOULD I DO? To boost the mid range, cut the bass and treble controls slightly and boost the gain control to the optimum level. 2. IVE HEARD THE STANTON SK SERIES USE THE SAME CROSSFADER AS THE PMC 05 PRO MK 2A. IS THIS TRUE? No, the Stanton SK2 uses a similar ALPS fader to the older version crossfader from the Vestax PRO series. This fader has now been upgraded exclusively within the Vestax range to the CF-05PCV design, which is considerably smoother and has a lifespan almost seven times longer than the original fader. This new fader has been judged by professional turntablists as the new industry standard. 3. CAN I GET A COLOURED FACEPLATE FOR MY PMC 05 PRO? There have been some limited batches of faceplates in blue and red designs for some European and USA distributors. There may be possible plans for future batches. 4. IVE HEARD THAT A LIMITED EDITION PMC-05PRO WAS AVAILABLE WITH ADDITIONAL FEATURES DESIGNED BY Q-BERT. IS THIS STILL AVAILABLE? The Q-Bert edition had the crossfader monitor fader to the top left side of the input faders rather than the lower right hand section. It also had pan faders rather than pan pots for each channel, and a short fader for master output volume instead of a pot. It also had a hamster switch for reversing the crossfader direction, located at the front of the mixer. This mixer is not available anymore, but many of its design features can be seen in current PRO series mixers. The PMC 07PRO and PMC 07PRO-ISP have the pan faders, master output fader and crossfader reverse switch as standard. The MK2 version of the PMC 05PRO has the crossfader reverse switch as standard. 5. CAN I CHANGE THE INPUT FADER CURVE ON MY MIXER? Yes, underneath the top panel you can access all three faders for adjustment and replacement. The two input faders have a three pole switch for adjusting the curve of the fader from a sharp cut-in to a smooth mix and a top of the fader cut-in. This is to allow DJs to set the fader to particular styles of mixing.

PMC-05 Pro III $50 Rebate
Buy a PMC-05 Pro III between Oct. 1 and Nov. 30, 2008 and get $50 Back!
Purchase a Vestax PMC-05 Pro III between October 1 and November 30, 2008 and receive a $50 rebate. To redeem your rebate, cut out the serial number from the PMC-05 Pro III box (or photocopy it) and mail together with this form and a copy of the purchase receipt (keep original) to:
REBATE CENTER ATTN: VESTAX PMC-05 Pro III $50 Rebate 4936 VERDUGO WAY #338 CAMARILLO, CA 93012 rebatesuport@rebate-central.com

PLEASE PRINT

Applications must be submitted by December 15, 2008.
Name: ____________________________________________________________________________________________ Address: __________________________________________________________________________________________ City: _________________________________________ State / Province: _____________ Zip Code: ______________ Phone: _____________________________ Email: ________________________________________________________ Serial Number: _____________________________________________________________________________________ All fields must be filled out.
Eligible product must be purchased between October 1, 2008 and November 30, 2008. Must be 18 or older. To redeem your rebate, cut out the serial number from the PMC-05 Pro III box (or photocopy it) and mail together with this form and a copy of the purchase receipt (keep original) to the address stated above. Please keep a copy of all submitted materials for your records. Offer expires November 30, 2008. Applications must be submitted by December 15th, 2008. Offer good in U.S. only. Void where prohibited, taxed or restricted by law. Please allow 6 - 14 weeks for delivery. Subject to product availability.