Operation Panel Name and Functions
ON/OFF button Press to turn on the printer or off. See Turning On the Printer on page 10. NAVI button Displays the navigation menu. See Other Buttons on page 9.
Easy-Scroll Wheel Selects the menu or setting item. See Easy-Scroll Wheel on page 7.
POWER lamp Off: the printer is off. Lighting: the printer is ready to print, is currently printing, or is currently initializing. Flashing: the printer is preparing to turn on or off.
Function button (f1)/(f2) Select the menu displayed at the lower corner of the screen on the LCD. See Other Buttons on page 9. +- buttons Specifies the number of copies.
Alarm lamp Indicates that an error has occurred. An error message is displayed on the LCD. HOME button Displays the HOME screen. Back button Allows you to return to the previous screen.
Stop/Reset button Allows you to reset the print settings you made. Also, to cancel printing in progress, press this button. Print button Press to start printing according to the settings displayed on the LCD. buttons Use these buttons, shown as arrows on the LCD, to select a menu item or photo, to specify the number of copies to print, to make print settings, or to scroll the screen. Additionally, use these buttons in trimming mode to move the trimming area. OK button Allows you to make a selection. For example, selecting a photo to be printed, selecting a menu item or other settings. Also, press to resume printing once an error has been resolved. The printer will then initialize ready for printing.
Basic Operation for the Operation Panel
(A) HOME button (B) Easy-Scroll Wheel (C) OK button

Easy-Scroll Wheel

Turn the Easy-Scroll Wheel left or right to select the setting item. The selected item is buttons to select the highlighted or rounded by the frame. You can also use the setting item.

HOME button

This section describes the procedure to display each menu from the HOME screen.

Display the HOME screen.

(1) Press the HOME button. The HOME screen will be displayed.

Select the menu.

(1) Turn the Easy-Scroll Wheel to select the menu, then press the OK button. Example: Select the Special photo print. The selected menu screen will be appeared. (1)
When you press the Function button (f2/Introduction), the introductions for the selected menu are displayed. See Function Buttons on page 9.
You can select the following menus on the HOME screen: Select and print: You can print the photos stored in a memory card while displaying on the LCD, and specify the number of copies for each photo listed. See Selecting Photographs to PrintSelect and print on page 18. Layout print: You can print your favorite photo in the specified layout. See Printing Multiple Photos on One Sheet of MediaLayout print on page 20. Special photo print: You can print all photos stored in a memory card, select the hue you like to print, and print photos according to the settings on the camera. You can also print a list of all photos and the photo information when you shot. See Using Useful Functions on page 24. Settings: You can perform the maintenance or change the various settings of the printer. See When Printing Becomes Faint or Colors are Incorrect on page 42 or Changing the Printer Settings on page 52. Sticker print: Print your favorite photo with a frame on the Canon genuine Photo Stickers. See Printing Stickers from a PhotoSticker print on page 21. Slide show: You can display photos stored in a memory card on the LCD sequentially.

This printer allows you to make the following DPOF settings: Image format: CIFF, Exif (Tiff), and JFIF Print type - Standard: The Photos for which you specified Standard using the DPOF function are printed. Print type - Index: The photos for which you specified Index using the DPOF function are printed according to the index print layout. Photos to Print: Only the photos specified using the DPOF function is printed (photos cannot be specified from the operation panel). Copies: photos are printed according to the numbers of copies specified using the DPOF function (numbers of copies cannot be specified from the operation panel). Other functions (addition of comments, trimming/rotation, etc.) are not supported. Photos are automatically scaled according to the page size. The upper, lower, left, and/or right portion(s) of the photo may be missing depending on the size of the paper you use. The shooting date format is as specified in the DPOF setting from DPOF print.
Printing with Adjusted Color BalanceColor balance print
This function allows you to print a sample of a photo in 9 different hues on a single sheet of paper. You can then select the hue you like from the sample and print a final copy. Procedure: Home button > Special photo print > Color balance print
Sample photo Bright/Soft Brightness/Contrast
Dark/Sharp Yellow Color tone Red
You can select the number of the hue that you like from a sample of a photo in nine different hues on the LCD. Depending on the paper you use, you may need to wait for a few minutes to let the colors settle. Wait until the colors of the sample photo settle, then select the number of the hue that you like.
Printing all PhotographsPrint all photos
You can print all photos saved on a memory card. Procedure: Home button > Special photo print > Print all photos
Print Photograph InformationCaptured info print
You can print the Photograph information (Exif information) when you shot on the white space of photo. Procedure: Home button > Special Photo print > Captured info print

Other Useful Functions

You can print your favorite photo as a postcard or sticker using the following features. Changing the DisplayChange display on page 26 Display photos sequentiallySlide show on page 26 Searching for Photos with the Shooting DateSelect date range on page 27 Printing a Specified AreaTrimming on page 28 Changing Print SettingsAdvanced on page 29

There may be a delay before the Search screen is displayed, depending on the number of photos stored in the memory card.

Specify a date range.

If you select One date only (1) Select the shooting date to search and then press the OK button. You can display the photos that are shot within the specified date.
If you select Select date range (1) (2) Select the date of the oldest photos to print and then press the OK button. Select the date of the most recent photos to print and then press the OK button. You can display the photos that are shot within the specified range of date.
The date that you specified is displayed in the format that you set at Date display in Other settings. See Date display on page 53. Press the Function button (f2/Cancel selected date range) to cancel the searching date range, and then press the OK button.
Printing a Specified AreaTrimming
You can print a specified area of the photo displayed on the LCD.
Please trim the photo after specifying Page size, Media type Bordered/Borderless on the print setting screen. If you change the settings after trimming the photo, the trimmed selection will be lost.
Select the photo to trim. Display the Trimming screen.
(1) (2) Press the Function button (f2/Edit/menu) on the screen Edit/menu is displayed. Select Trimming, and then press the OK button. The Trimming screen is displayed.
Trim the sections you want to print.
buttons: you can move the trimming area. Easy-Scroll Wheel: you can enlarge or reduce the trimming frame. Turn clockwise to enlarge or counterclockwise to reduce the cropping frame size. Function button (f2/Rotate frame): you can rotate the trimming frame. To switch the cropping frame between portrait and landscape orientations, press this button.
Finalize the trimmed area.
(1) Press the OK button. The trimming area is fixed and the original photo is displayed.
You cannot save the trimmed image to a memory card. Trimming limits are displayed on photographs that have been trimmed. To change the cropped area once it has been set, press the Function button (f2/Edit/menu) again on Edit/menu displayed screen, select Trimming, then press the OK button. To cancel cropping after cropping has been set, press the Function button (f2/Edit/menu) again on Edit/menu displayed screen, select Cancel Trimming, then press the OK button. Select Displayed images only or All images, then press the OK button.
Changing Print SettingsAdvanced
You can change the Bordered/Borderless, Brightness, or Contrast by pressing the Function button (f1/Advanced) on the screen displaying Advanced. Border Bordered. Prints with a border. Borderless. Prints on the whole paper without a border. Date Date ON. Prints the date the photo was taken. Date OFF. Does not print the date the photo was taken. File no. File no. ON. Prints the image No. (DCF No.) on the photo. File no. OFF. Does not print the image No. (DCF No.) on the photo.

Printing Photographs from a Wireless Communication Device
If you have a mobile phone or a PDA with an infrared port for wireless data transmission, you can print photos through a cordless connection with the printer. If the optional Bluetooth unit BU-20 is connected to the printer, you can also print photos through Bluetooth communication.
In order to use infrared communication, your mobile phone or PDA must satisfy the following requirements: The mobile phone or PDA must have an IrDA port and be compatible with image data transfer using infrared communication. Printable contents: Image taken with a camera-equipped mobile phone or PDA.
When printing photos through Infrared Communication: See Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone or a PDA below. See Performing Infrared Communication on page 38. When printing photos through Bluetooth Communication: See Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone or a PDA below. See Performing Bluetooth Communication on page 39.
Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone or a PDA
You can select the page size, media type, layout and borderless printing on the Wireless print setting screen when printing from a mobile phone or a PDA through Infrared communication or Bluetooth communication. The initial setting is borderless printing on 4" x 6" Photo Paper Plus Glossy.
Turn on the printer. Display the Wireless print settings screen.
(1) Display the Settings screen. (2) Select Device settings and then press the OK button. (3) Select Wireless print settings and then press the OK button. The Wireless print settings screen is displayed.
Confirm or change the settings.
(1) To change the setting, select the item to set and then press the OK button. Select a setting on each setting screen and then press the OK button. (2) After confirming or changing the settings, select OK and press the OK button.
Wireless Print Setting Items

(1) (2) (3) (4)

(1) Select the page size for the wireless print. (2) Select the media type for the wireless print.
For information on wireless print compatible page size and media type, see Using Genuine Media on page 14.
(3) Corrects the contours and smooths out the jaggedness. Image optimizer ON/Image optimizer OFF (4) Select the layout of the photos as below. Sticker print: Stickers x 16 Printing on paper other than sticker: Bordered, x 2, x 4, x 8 Borderless, x 2, x 4, x 8

When printing on Canon Genuine Photo Stickers, make the settings as below.

Page size Stickers

Media type Photo Plus Glossy

Layout Stickers 16

Performing Infrared Communication
You can print photos in your mobile phone or PDA. When printing through infrared communication, also refer to the manual of your mobile phone or PDA.
Turn on the printer. Load the paper.
Set the printing paper and layout.
See Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone or a PDA on page 36.
Start Infrared Communication.
(1) Oppose the infrared port of the mobile phone or the PDA to that of the printer at a distance of less than 7.9 inch (20 cm).
The effective angle of the IrDA Port of the printer is about 10 from the central axis in both vertical and horizontal directions. The allowable distance of communication with the printer depends on the mobile phone or the PDA you use. For this distance, refer to the manual of your mobile phone or PDA.
IrDA Port of printer Effective angle (in both vertical and horizontal direction): About 10 Infrared Port
Less than 7.9 inch (20 cm) (Do not block with any obstacle.)
(2) Select the photo to print and send the data to the printer using the infrared communication function of the mobile phone or the PDA. Printing will start after sending all data.
For the procedure to print from your mobile phone or PDA, refer to the manual of your mobile phone or PDA. Do not place any obstacle between the IrDA ports of the printer and mobile phone or PDA. Data cannot be transmitted between them. During sending, be careful not to interrupt infrared communication with the printer. If it is interrupted, send the data from the mobile phone or the PDA again. Depending on your device, the Fine print quality option may not be available due to the restriction on the infrared transfer capacity. We recommend printing on sticker or credit card-sized paper when the print quality on other types of paper is not fine. About transmittable data It does not support printing a downloaded content or photo and a photo attached to an E-mail for security reason. It does not support printing video files. Depending on your device, it may not print data stored in a memory card. Depending on the size of a photo, it may take a while for this printer to start to print after starting the infrared transfer. It automatically sets the photo quality and orientation (portrait or landscape) according to the photo size. Depending on the photo size shot on the mobile phone, the edges of the image may be cut off when performing borderless printing; the margin size may change when printing with borders. If the photo file is over 1.8MB in size, it may not be possible to send the file.

Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the Print Head Nozzles. Use this function when printed results are blurred or the color is incorrect.
(1) Turn on the printer. See Turning On the Printer on page 10. (2) Load the supplied paper or Canon 4"6"/101.6152.4mm paper into the Paper Support. See Loading Printing Paper on page 11.
Print the Nozzle Check Pattern.
(1) Display the Settings screen and then press the OK button. (2) Select Maintenance and then press the OK button. (3) Select Nozzle check pattern and then press the OK button. The confirmation screen of Nozzle check pattern is displayed.
(4) Select Yes and then press the OK button. The nozzle check pattern is printed and the confirmation screen of patterns is displayed.
Examining the nozzle check pattern.
When all print check patterns are successfully printed: Select All A and then press the OK button. When no white stripes appear When there is more than one white stripe on the print check patterns: Select Also B and then press the OK button. When white stripes appear The confirmation screen of Cleaning is displayed. Select Yes to start the cleaning. See Print Head Cleaning on page 44.

Print Head Cleaning

Clean the Print Head if a missing or white stripes appear in the nozzle check pattern. Cleaning the Print Head consumes ink, so perform Cleaning only when necessary.
Start Print Head Cleaning.
(1) Display the Settings screen. (2) Select Maintenance and then press the OK button. (3) Select Cleaning and then press the OK button. (4) The confirmation screen of Cleaning is displayed.
(5) Select Yes and then press the OK button.
Do not perform any other operations until the Print Head Cleaning finishes. This takes about 60 seconds.
Print the nozzle check pattern to verify that the Print Head Nozzles are clean.
When Print Head Cleaning finishes, the confirmation message is displayed. Select Yes to print the Nozzle Check Pattern, and verify the Print Head Nozzles. See Printing the Nozzle Check Pattern on page 43.
If the problem remains after performing Print Head Cleaning twice, try Print Head Deep Cleaning.

Print Head Deep Cleaning

If print quality does not improve by standard Print Head Cleaning, try Print Head Deep Cleaning, which is a more powerful process. Print Head Deep Cleaning consumes ink, so perform this procedure only when necessary.

Adjusting the Print Head Manually
If the Automatic Print Head Alignment does not work or if you wish to adjust the print heads manually, follow the procedure below.
1. Press the ON/OFF button to turn on the printer, and then load two sheets of supplied paper or Canon genuine 4" x 6"/101.6 x 152.4 mm paper* in the Auto Sheet Feeder.
* Use the following papers. Matte Photo Paper Photo Paper Pro Photo Paper Plus Glossy
Press the HOME button. Select Settings and then press the OK button. Select Maintenance and then press the OK button. Select Manual head align and press the OK button. Select Yes and then press the OK button. The Print Head alignment pattern is printed. 7. When Did the patterns print correctly? is displayed, confirm that the pattern is printed correctly, select Yes, and then press the OK button. 8. Check the printed patterns and use the or to input the number of the pattern in columns A to D that has the least noticeable streaks, and then press the OK button.

2. 3. 4. 5. 6.

9. Make sure that paper is loaded, and then click the OK button. The second sheet of the Print Head alignment sheet is printed. 10.In the same way, select the best patterns for columns E and F, and then click the OK button.
When you turn off the printer, be sure to press the ON/OFF button on the printer. Otherwise, the settings made here will not be saved.
LCD Cannot Be Seen at all
Cause Cannot see the display on the LCD. Action If the POWER lamp on the Operation Panel is off The printer is not powered on. Connect the power cord and press the ON/OFF button. The printer will power on and the LCD will display a message. If the POWER lamp is lit On the Operation Panel, press the OK button.
An Unintended Language Is Displayed on the LCD
Cause The language you want to be displayed is not selected Action Select the language you want to be displayed following the procedure below. (1) Press the HOME button. Wait for about 5 minutes, select , and then press the OK button. (2) Press the button. button to select , then press the OK

(3) Press the button four times, then press the OK button. If the Bluetooth unit is connected to the printer, press the button five times, and then press the OK button. (4) Press the or button to select the language you want to be displayed, then press the OK button.
Cannot Install the Printer Driver
Cause Action If you were unable to proceed beyond the Printer Connection screen, follow the procedure below to reinstall the printer driver.
Unable to proceed beyond the Printer Connection screen.
(1) Click Cancel on the Printer Connection screen. (2) Click Start Over on the Installation Failure screen. (3) Click Back on the screen that appears next. (4) Click Exit on the Welcome screen, then remove the CDROM. (5) Turn the printer off. (6) Restart the computer. (7) Make sure you have no application software running, including anti-virus software. (8) Follow the procedure described in the Easy Setup Instructions (Setup Sheet) to reinstall the printer driver. Installation does not start automatically when the Setup CD-ROM is inserted into your computers disc drive.
Click Start > My Computer > double-click the CD-ROM icon.
In Windows 2000, open the My Computer window and then double-click the CD-ROM icon.
To use the Run command to start the setup program, specify your disc drive and then the name of the setup program, Msetup4.exe. The drive letter of the disc drive depends on your computer. Double-click the CD-ROM icon on your desktop to start installation. If the CD-ROM icon is not displayed, restart your computer. If the icon is still not displayed, try different disks and see if they are displayed. If other disks are displayed, there is a problem with the Setup CDROM. Contact a Canon service representative.
Installation procedure not followed Follow the procedure described in the Easy Setup Instructions correctly. (Setup Sheet) for proper installation. If the drivers were not installed correctly, uninstall the printer driver, restart your computer, and then reinstall the drivers. Refer to the Printer Driver Guide on-screen manual.

Paper not loaded properly.

Paper Jams

Cause Paper jammed in the Paper Output Slot or the Auto Sheet Feeder. Action Remove the paper following the procedure below. (1) Slowly pull the paper out, either from the Auto Sheet Feeder or from the Paper Output Slot, whichever is easier.
If the paper tears and a piece remains inside the printer, open the Printer Cover and remove it. After removing all paper, close the Printer Cover, turn the printer off, and turn it back on. Be careful not to touch the components inside the printer. If you cannot pull the paper out, turn the printer off and turn it back on. The paper will be ejected automatically. (2) Reload the paper in the printer, and press the OK button on the printer. If you turned off the printer in step 1, all print jobs in queue are canceled. Reprint if necessary.
For details on how to load paper, see Loading Printing Paper on page 11. When reloading the paper in the printer, see Paper Does Not Feed Properly on page 67 to confirm that you are using the correct paper and are loading it into the printer correctly. If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact your Canon Service representative. Landscape credit card-sized paper jammed inside the printer. Do not load credit card-sized paper in the landscape orientation. Remove the paper following the procedure below. (1) Load a single sheet of the paper in the Auto Sheet Feeder in portrait orientation. Do not load it in the landscape orientation. (2) Start printing. The paper is fed and then pushes out the jammed paper as it ejects. If you cannot remove the jammed paper, contact your Canon Service representative.
The POWER Lamp (blue) and ALARM Lamp (orange) Flash Alternately
Disconnect the printer cable from the printer, turn the printer off, and then unplug the printer from the power supply. Plug the printer back in and turn the printer back on after leaving it for a while. If the problem is not resolved, contact your Canon Service representative.
Cannot Print Properly from the Digital Camera
The following are the possible errors that may occur when printing directly from a digital still camera or digital video camcorder*, and the countermeasures to eliminate them. * Hereafter, the digital still camera and digital video camcorder are collectively called a digital camera or camera.
PictBridge compatible digital cameras can be connected to your printer for direct printing. This section describes errors that are indicated on Canon brand PictBridge-compatible cameras. The error messages and operations may vary depending on the camera you are using. If you cannot clear the error on your device, check the error message displayed on the LCD of the printer, and then clear it. For details, see Error Message Is Displayed on the LCD on page 55. A communication time out occurs if printing takes a long time or if it takes too much time to send data. This may stop printing. In such a case, disconnect the cable between the printer and the camera, and reconnect the cable between the printer and the camera. Then, turn the camera on, if it does not automatically turn on. If the problem is still unresolved, select some other photo and check if it can be printed or not. Depending on the model or brand of your device, you may have to select a print mode compatible with PictBridge before connecting the device. You may also have to turn on the device or select Play mode manually after connecting the device to the printer. Perform necessary operations according to the instruction manual supplied with your device. The Print Head Nozzles may be clogged if printing becomes faint or colors are incorrect. See When Printing Becomes Faint or Colors are Incorrect on page 42. If the paper is curled or its surface is scratched during printing, make sure that you are using the correct type of paper. If this error occurs even when you are using the correct type of paper, slide the Paper Thickness Lever to the left. See Interior on page 4. To disconnect the cable connected between the digital camera and printer, follow the procedure below.

1. Disconnect the cable from the printer. 2. Turn off the digital camera. 3. Disconnect the cable from the digital camera. When disconnecting the cable, be sure to hold the connector by its sides.
For the errors indicated on the camera and their solution, also refer to the users manual of the camera. For other troubles on the digital camera, contact the manufacturer of the camera.
Camera Error Message Printer in use
Try This Images are being printed from the computer. Wait until printing ends. The printer automatically starts printing the images from the camera after completing the current printing. If the printer is warming up, wait until warm-up ends. When it is ready, the printer starts printing automatically.

No paper Paper jam

Load the paper in the Auto Sheet Feeder, and select Continue*1 in the display on your camera. Select Stop in the display on your camera to stop printing. Remove the jammed paper, load new paper, and press the OK button on the printer and retry printing. Set the Paper Thickness Lever to the right. If paper is scratched, set the Paper Thickness Lever to the left. Return the Paper Thickness Lever to the right after printing. Close the Printer Cover on the printer. The Print Head is defective or not installed. Install a Print Head according to the Easy Setup Instructions (Setup Sheet). If the Print Head has already been installed, remove the Print Head and reinstall it. If the error still remains, the Print Head may be defective. Contact the Canon service representative. The printer has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example, This error message indicates that the ink absorber is nearly full. You can continue printing for a while by selecting Continue*1 in the display on your camera. However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible (You will need to replace a particular part of the printer). An ink tank is not installed properly, or is out of ink. Confirm the error message displayed on the LCD and take the appropriate action to resolve the error. An ink tank that was once empty is installed. Replace the ink tank and close the Printer Cover. Printing with an ink tank that was once empty may damage the printer. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the Stop/Reset button for at least 5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any printer malfunction or damage caused by refilled ink tank.
The Paper Thickness Lever position is incorrect. Printer cover open No printhead

Waste tank (ink absorber) full/ Ink absorber full

No Ink

Ink error
Camera Error Message Hardware Error
Try This The optional battery has running short. Follow the procedure below. (1) Turn the Printer off. (2) Connect the supplied AC adapter or attach the charged battery. (3) Turn the Printer on. The ink tank error has occurred. Replace the ink tank. See Replacing an Ink Tank on page 47.

Printer error

An error requiring servicing might have occurred (POWER lamp and Alarm lamps flash alternately). Disconnect the cable between the printer and the camera, turn off the printer, and unplug the power cord of the printer from the power supply. After a while, plug the power cord of the printer back in, turn on the printer, and then reconnect the camera to the printer. If the same error occurs, contact a Canon service representative.
To resume printing, you can press the OK button on the printer instead of selecting Continue.
Cannot Print Properly through Wireless Communication
Cause Printer placement is inadequate. Action When printing through infrared communication, confirm that the IrDA ports on the printer and the mobile phone are placed face to face with each other at a proper angle and distance, and that there is nothing blocking them. Then, retry printing. Operational distance and angle vary depending on the specifications of your mobile phone and your operating environment, but generally place the printer within around 8 inches / 20 cm from the mobile phone in a position that enables proper communication. During sending, be careful not to interrupt infrared communication with the printer. If it is interrupted, send the data from the mobile phone or the PDA again. The infrared communication function of the printer is only compatible with mobile phones with IrDA compliant infrared communication ports. Printing through infrared communication cannot be performed by any other types of mobile phones. See Printing Photographs from a Wireless Communication Device on page 36.
During infrared communication, infrared rays were blocked. The conditions to print properly through the infrared communication are not met.
The mobile phone or the PDA is Place the mobile phone or the PDA within 33 feet (10 m) of the too far away from the printer printer when attempting to print via a wireless communication. (For Bluetooth communication).
The printer is installed in an You can establish a connection between a mobile phone or a incorrect location (For Bluetooth PDA and the printer up to a distance of approximately 33 feet/ communication). 10m for Bluetooth communication, however the following conditions may affect both your ability to establish a connection and the connection speed: Obstructions or electric devices placed between the printer and your mobile phone or PDA Locations where magnetic fields, static electricity, or radio wave interference are present The sensitivity and antenna efficiency of your mobile phone or PDA Try changing the location of the printer or moving the mobile phone or the PDA closer to the printer. The device you are using is compatible with a different standard (For Bluetooth communication). You have not selected the correct printer at your mobile phone or PDA (For Bluetooth communication). The Bluetooth unit is not inserted to the printer (For Bluetooth communication). The printer cannot connect to devices that use a different standard (profile) for printing, even if they are Bluetooth compliant. Refer to the users manual of your mobile phone or PDA to see which profiles it is compatible with. You can confirm the printer name at Device name in the Bluetooth settings menu. Select the corresponding printer name at your mobile phone or PDA. See Changing the Bluetooth SettingsBluetooth settings on page 41. Confirm that the Bluetooth unit is inserted properly. If Bluetooth settings is displayed on the menu screen, the Bluetooth unit is inserted properly.

This printer cannot print data from a PC via Bluetooth communication.

Appendix

Reading the On-screen Manuals
Along with this Photo Printing Guide, on-screen manuals are also supplied with your printer. Install the following on-screen manuals when you need to know how to print from your computer, printer driver setup, or how to use the supplied print application. Select Easy Install to install the printer driver and the print application. Select Custom Install to select and install the on-screen manuals. You can view the on-screen manuals in the following way:
To view the on-screen manual, double-click the mini260 On-screen Manual shortcut icon on the desktop, or click Start > All Programs (or Programs) > Canon mini260 Manual > mini260 Onscreen Manual. System Requirements Browser: Windows HTML Help Viewer
Microsoft Internet Explorer 5.0 or later must be installed. The on-screen manual may not be displayed properly depending on your operating system or Internet Explorer version. We recommend that you keep your system up to date with Windows Update.
To view the on-screen manual, double-click the mini260 On-screen Manual alias on the desktop.
Users in Asia If you installed the Users Guide from the Manual folder in the Setup CD-ROM, open the folder in which you copied the Users Guide and double-click top.htm.
System Requirements Browser: Help Viewer
The on-screen manual may not be displayed properly depending on your operating system. We recommend that you keep your system up to date. We recommend using Safari as your Web browser to view the HTML format on-screen manuals. If Safari is not installed on your computer, download it from Apple Computer, Inc. website and install it.
For the Optional Bluetooth Unit Users
Please read the safety warnings and cautions provided in this manual to ensure that you use your product safely. Do not attempt to use the product in any way not described in this manual.
You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions.
You may cause injury or damage the printer if you ignore any of these safety precautions.
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please be away from this product and consult your doctor. Do not use this product inside medical institutions such as hospitals or near electronic medical equipment. Magnetic flux may affect the operation electronic medical equipment. Keep the product at least 22 cm (8.7 in) away from the pacemaker. Magnetic flux may affect the operation of the cardiac pacemaker. Do not use this product in aircraft. Magnetic flux may cause malfunction, and lead to accidents. Do not use the product near automatically controlled equipment such as automatic doors and fire alarms. Radio waves may cause equipment malfunction, thus leading to accidents. Do not attempt to disassemble or modify the product. Doing so may cause injury, electric shock or fire.

NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND CANON USA, OR ITS ASF. (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, INCONVENIENCE, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA OR ITS ASF HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR ITS ASF BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT SOLD BY CANON USA NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA, OR ITS ASF. (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.) THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY. Canon USA offers a range of customer technical support* options: Interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.com) Toll-free live technical support MondaySaturday (excluding holidays) at 1-800-828-4040 Telephone Device for the Deaf (TDD-1-866-251-3752) Repair or Exchange Service Options: In the event service is required for the Product during the limited warranty period, Canon USA offers two hardware support options: Authorized Service Facility Carry-In / Mail-In Service Canon USAs Carry-In/Mail-In Service provides repair or exchange, at Canon USAs option, through Canon USAs Authorized Service Facility (ASF) network. The name and telephone number of the ASF(s) near you may be obtained from Canon USAs Web site at www.canontechsupport.com or by calling the Canon USA Customer Care Center at 1-800-828-4040, or any time while speaking to a technical support person. A Product covered by this limited warranty will be repaired or exchanged, as determined by Canon USA, and returned without charge by the ASF. InstantExchange Service ** A Canon Customer Care Center or ASF technician will attempt to diagnose the nature of the problem and, if possible, correct it over the telephone. If the problem cannot be corrected over the telephone, and you elect the InstantExchange option, a reference number will be issued to you. You will be asked for the Product serial number and other information pertaining to your defective Product and for a ship-to location for the replacement Product (must include street address). The Canon USA repair facility will ship out the replacement Product, via 2nd day Air freight service, prepaid by Canon USA. After receipt of the replacement Product (with instructions and a prepaid waybill), follow the enclosed instructions on how to ship the defective Product to the Canon USA repair facility. The defective Product must be returned in the shipping carton in which the replacement Product was packed and include the reference number, A COPY OF YOUR DATED PROOF OF PURCHASE (BILL OF SALE), and a complete explanation of the problem. DO NOT INCLUDE ANY OTHER ITEMS WITH THE DEFECTIVE PRODUCT IN THE RETURN SHIPPING