Installation Manual on Continuous Ink Supply System (CISS) For printer EPSON SX200/SX205/SX400/SX405/NX200/ NX400TX400/ TX200/TX203/TX209/TX409
Thank you for using the INKSYSTEM Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. I. Instruction & Unpacking 1. Accessories 1) Continuous ink supply system.1 2) Air Filters 4 3) Sponge.1 4) Injector.1 5) Long needle.1 6) Short needle.1 7) Protection clamp.1 8) Installation Manual.1 9) Certificate on free installation.1

Pic. 1-1

Pic. 1-2
2. Inspection before installation A. Check whether all the accessories are available or not. B. Check whether the system is pulling out or too much air remained in the connecting tubes (length over 20cm)? II. Test printer
INSTALLATION MANUAL ON CISS FOR PRINTER EPSON SX200/SX205/SX400/SX405/NX200/NX400TX400/TX200/TX203/TX209/TX409
1. Check printer status to see whether it is normal or not, and check its mechanics for any damage. 2. Print a test sheet on nozzle check to see if gaps appear on lines in the printout.

Pic. 2-1

Pic. 2-2, 2-3
3. If printer is alright, please print a picture to see the result. Note: This system will not cause any damage to your printer. II. Installation Procedures 1. Make the system ready Put this system on the left side of printer, tidy up ink flow tubes, pull the air balance plug out (3-1-1) and replace it with an air filter with the bigger side downwards (3-1-2).This is repeated for each air balance plug. Keep the air balance plugs for future use.

Pic. 3-1-1

Pic. 3-1-2
2. Move out cartridge holder Choose Main menu ->maintenance->cartridge change->cartridge change tools->next step->next step->confirm, then you can move out the cartridge holder, pressing button, plug off power source.
3. Take cartridge cover off Take screwdriver out, shake the screwdriver, lift cartridge cover and take it off. 4. Insert ink cartridges Take out original ink cartridges, insert system cartridges according to the color order, and press down the cartridges tight1, stick out ink tube. 5 Fix ink tube Peel off sticker film, tidy up ink tube, fix ink tube on printer body. During printing, the sticker can't be taken off and ink tube can't be twisted seriously. 6. Check tube length Move cartridge holder to left side, then to right side, check if the tube is too long or too short. Move cartridge holder to right side, check if ink tube will fall down during movement, the holder will be blocked during printing. Generally, before shipment, we have adjusted the tube to the right size, please double check before printing. 7. Adjust tube length If step 6 is ok, then there is no need to go through this step. If the tube length is too short then lengthen it, if too long then shorten. If the tube falls down, you need adjust the angle of sticker to prevent falling. 8. Fix ink tube Fix ink tube, when you close printer cover, the pressure on ink tube should be tight, cannot be too heavy to stop ink-flow. 9. Ready for print Plug power source on power source (3-9-1), turn the printer on, and check if the printer works or not.
Pic. 3-9-1 10. Test printer nozzle Select the option for printer nozzle check (3-10-1), print test sheet, if it is alright (3-10-2), you can start using the printer normally. If it is not (3-10-3),
please clean the nozzle. If only line is missing for one color after cleaning several times, turn off the printer and let it stay turned off for one hour or more. The air bubble clogging up the nozzle is likely to dissipate, allowing you to print. If you still have problems, please contact your local distributor.

Pic. 3-10-1

Pic. 3-10-2, 3-10-3
IV. Ink Amount Reset It requires to change cartridges while printing (4-1-1) and ink light flash. Press ink button to move out cartridge holder. Press chip reset button for 3 seconds (4-1-2), repress ink button to move back cartridge holder, then ink amount shows 99% again. Redo nozzle inspection and printer can run normally if it is alright. (Black and other colors can be handled by the same method). Note: Distinguish two kinds of chips. The manipulation is the same. The difference is that the chips with transferred switch should be switched downwards (4-1-3), otherwise, chips cannot be recognized.

Pic. 4-1-1

Pic. 4-1-2
Pic. 4-1-3 V. Removing used continuous ink supply system Replace air filters with air plugs. Move out cartridge holder and take the rack off. Take the cartridges out and place the cartridges on the tissue with the ink flow nozzle downwards, and let the tissue at the same level with the system ink tank. VI. Refill ink During printing, if you found out that the ink level in the tank is below the red line, please add ink according to the methods. VII. Check air balance tube During printing, if you find some abnormal cases, such as bad output, ink drip out on paper, then you need to check the air balance tube to see if exist ink. If yes, please do according to the manual of "ink pump out from balance tube. VIII. Warnings 1. During printing, please do not take cartridges over than the printer. Please keep ink tank and printer in the same level. 2. During printing, do not inverse, lift up or lower ink tanks. 3. Please do not block up ink tanks for curiosity or for fear of less ink 4. Use CISS at clean environment and within the temperature range 15-35 degrees. 5. Please use high-quality ink to prolong and to increase printing quality. 6. During shipment or storage, please do not turn the system over and always have the holes sealed with plugs, to prevent ink leakage. 7. Please do not shake cartridges to avoid leaking. 8. Please do not unplug joint elbow, do not tear off adhesive tape seal that at the bottom of cartridge, do not touch the I chips that sideways. IX. Product Warranty INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty
period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase. The INKSYSTEM CISS installation is free in any of the representative offices. The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner. Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed. Please adhere to the following points to receive a warranty service as soon as possible: When accepting the product check if the warranty certificate is filled in correctly.
Keep the original receipt that contains the date of purchase information. Demonstrate the failed device to the service center managers (the warranty repair or replacement can be provided only upon the failed product availability). Ensure that the service center gets the product with its full set: descriptions, chips, tubes, etc. We cannot provide a warranty repair under several conditions: If the warranty certificate is wrongly filled in. If the device has mechanical damages: chippings, dents, fractures, scratches, etc. If the identification information was removed or the information identification has been complicated in any possible way: additional notes, stickers, etc. If the user has previously performed a repair or change in the internal parts of the device. If the equipment has previously been repaired in a service center that is not an INKSYSTEM representative center. If the device was installed by the user. If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party. If the ink used was not manufactured by INKSYSTEM (South Korea) If the printing limit was exceeded more than prints.

The INKSYSTEM Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.

Warranty certificate

(Product) Continuous ink supply system (Model Name) _____________________________________ (Serial ) _____________________________________ (Date of Purchase) _____________________________________ (Warranty Period) 1 year from the date of retail purchase Seller company
The warranty conditions are agreed and accepted. No claims against the product appearance and the list of equipment. Customers signature

Printer, scanner and copier: use with or without a PC
Discover high-performance, PC-free printing, scanning and copying. Print high-quality documents and photos and save money with individual inks by only replacing the colour you use.
This versatile all-in-one can be used without a PC for making quick copies and printing photos using the built-in memory card reader or via the PictBridge interface. Whether you print documents or photos, Epsons DURABriteTM Ultra Ink provides high-quality text and lab-quality photos that are resistant to water, smudging and fading. Whatever you print, you can save money with individual ink cartridges, because you only need to replace the colour you use. A single, compact device: save space by printing, scanning and copying all from one machine Long-lasting Epson DURABrite Ultra Ink: your prints are water, smudge and fade resistant Keep costs low: only replace the colour you use with four individual ink cartridges Print photos without a PC: use the built-in memory card reader or connect to a PictBridge compatible camera Epson PhotoEnhance: automatically adjusts colour and contrast for great photos Epson Easy Photo FixTM: restore colour and correct backlighting when scanning faded photos Epson Easy Photo Print: remove red-eye from your photos ABBYY FineReader OCR: save retyping by scanning and editing text documents
Key benefits: High-quality all-in-one that can be used with or without a PC Save money with individual ink cartridges from 9.99*1 Print high-quality documents and lab-quality photos up to A4 with Epson DURABrite Ultra ink Print at up to 34 ppm and make quick copies without using a PC
Epson Stylus SX200 Series Printing technology
Printing method Nozzle configuration Droplet size Ink system 4-colour inkjet printer, Epson Micro Piezo print head 90 nozzles Black / 90 nozzles, each colour (Cyan, Magenta, Yellow) 3 pl (minimum) with Variable-sized Droplet Technology Epson DURABrite Ultra Ink Up to 5760x1440 optimised dpi on suitable media using RPM (Resolution Performance Management) Up to 34 ppm*2 Up to 34 ppm*2 Approx. 26 secs*2 Up to 30 cpm*2 Up to 30 cpm*dpi - 2.2 msec/line, 600 dpi - 7.2 msec/line 300 dpi - 7.2 msec/line, 600 dpi - 13.1 msec/line A4 flatbed colour image scanner CIS 1200x2400 dpi Compact Flash (Memory card only), MicroDrive, Memory Stick, Memory Stick Duo*3, MagicGate Memory Stick, MagicGate Memory Stick Duo*3, Memory Stick PRO, Memory Stick PRO Duo*3, SD, SDHC, MiniSD*3, MiniSDHC*3, MicroSD*3, MicroSDHC*3, Multi Media Card, xD-Picture card, xD-Picture card Type-M, xD-Picture card Type-H Hi-Speed USB Compatible with the USB 2.0 specification*4 PictBridge Input: 120 sheets A4 plain paper (64 g/m2) A4, Letter, Legal, 20x25 cm, 13x18 cm, 10x15 cm, 9x13 cm, 13x20 cm, A5, B5, A6, Envelopes: No.10, DL, Cmm top, left, right, bottom via custom settings in printer driver*individual ink cartridges Black Cyan Magenta Yellow T0711 T0712 T0713 T0714 T0891 T0892 T0893 T0894 T0711H Approx. 12W Approx. 3W (Sleep mode) ENERGY STAR qualified printer AC 220-240V Windows 2000 / XP / XP-x64 / Vista, Mac OS 10.3.9 / 10.4.x / 10.5.x or later 1 year standard warranty Optional extention to 3 years subject to availability 513x230x394 mm 7.5 kg 450x342x182 mm 5.8 kg (excluding ink cartridges and power cable) 5.3 B, 40 dB(A) (according to ISO7779 pattern with Epson Premium Glossy Photo Paper/Photo RPM mode) Epson Easy Photo Print Epson File Manager Epson Web-To-Page ABBYY FineReader 6.0 Sprint Plus (PC) ABBYY FineReader 5.0 Sprint Plus (Mac)
Print resolution Print speed
Black text A4 Colour text A4 Photo 10x15 cm
Recommended ink cartridges*1 For the best results, always use Epson genuine ink.
Black Cyan Magenta Yellow Multipack T0711 T0712 T0713 T0714 T0715

Copy speed

Black text A4 Colour text A4

Scan speed

Scanning technology
Sensor type Scan resolution

Stand-alone functions

Supported memory cards

Interface Paper handling

Capacity Media size Print margin
Recommended media There is a range of photo paper to suit your needs for every occasion, available in 10x15 cm, 13x18 cm and A4 sizes.

Ink cartridges

Recommended ink cartridges Also available

Electrical specification

Power consumption

Voltage

Operating systems Warranty General
Dimensions (LxWxH) including carton box Weight Dimensions (LxWxH) excluding carton box Weight Noise level

Glossy Photo

Software
*1 Recommended ink cartridges. For full ink cartridge compatibility refer to the user documentation or visit www.epson-europe.com *2 For more information, please visit www.epson-europe.com *3 Adaptor required (not supplied in box) *4 USB cable required for PC/Mac use (not supplied in box) *5 Otherwise 3 mm top, left, right, bottom

Premium Glossy Photo

Whats in the box: Epson Stylus SX200 Series printer, 4 x ink cartridges, software CD, Basic Operation Guide, Start Here guide, control panel icon sticker, warranty document, power cable.
For further information please contact your local Epson office or visit www.epson-europe.com Austria 0810/13 (0,07 /Min.) Belgium 070/350120 (0.1735 /min.) Czech 800/Denmark Finland 091 France 100 (0,12 /min) Germany 01805/10 (0,14 /Min.) Greece 210-8099499 Hungary 83 Ireland 409132 Italy 02-(0,12 /min.) Luxemburg 900/43010 (0,24 /min.) Middle East +Netherlands 0900-5050808 (0.05 /oproep + 0.15 /min.) Norway Poland 0-0-(0,16 z/min.) Portugal 111 Russia (095) 777-03-55 Slovakia 429 South Africa (+2711) 465-9621 Spain Sweden 0771-400135 (Mobilsamtal 0,99 kr/min, Lokala samtal 0,30 kr/min, Utlandssamtal 0,89 kr/min) Switzerland (4-8 cent./min.) Turkey (0212) 3360303 United Kingdom 6702 Entity carrying out management and coordination pursuant to article 2497 bis of Civil Code: Epson Europe BV EPSON is a registered trademark of Seiko EPSON Corporation. All other product names and other company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners. Errors and omissions excepted, all specifications are subject to change without notice.

SX200s-EN-06/08