For USA only: This product contains a CR Coin Lithium Battery which contains Perchlorate Material special handling may apply, California residents, See www.dtsc.ca.gov/hazardouswaste/perchlorate/
WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
PRINTED IN CHINA / IMPRESO EN CHINA 07ET(TINSE1300EH01)
NON-ADD / SUBTOTAL KEY: Non-add When this key is pressed right after an entry of a number in the Print mode, the entry is printed on the left-hand side with the symbol #. This key is used to print out numbers not subject to calculation such as code, date, etc. Subtotal Used to get subtotal(s) of additions and/or subtractions. When pressed following the or key, the subtotal is printed with the symbol and the calculation may be continued. By pressing this key even in the Non-print mode, the displayed number is printed without any symbol. When the POWER SWITCH; PRINT / ITEM COUNT MODE SELECTOR is set , P or PIC position, and Date or Clock is displayed, press this key to print the displayed contents, including # symbol, from the left side of the paper roll. Example: Date printing #2007 (when the date is September 15, 2007) Clock printing # (when the time is 10:30 a.m.) #- - - - - - - - - - - (when the time is 6:25 p.m.) When the Date / Clock printing is complete, the Calculation mode is restored.

CLEAR / CLEAR ENTRY KEY Press this key twice, followed by TOTAL KEY EQUAL KEY
, to print the set tax rate.
CHANGE SIGN KEY: Changes the algebraic sign of a number (i.e., positive to negative or negative to positive). RECALL AND CLEAR MEMORY KEY RECALL MEMORY KEY TAX-INCLUDING KEY PRE-TAX KEY GRAND TOTAL KEY

OPERATIONAL NOTES

To insure trouble-free operation of your SHARP calculator, we recommend the following: 1. The calculator should be kept in areas free from extreme temperature changes, moisture, and dust. 2. A soft, dry cloth should be used to clean the calculator. Do not use solvents or a wet cloth. 3. Since this product is not waterproof, do not use it or store it where fluids, for example water, can splash onto it. Raindrops, water spray, juice, coffee, steam, perspiration, etc. will also cause malfunction. 4. If service should be required, use only a SHARP servicing dealer, a SHARP approved service facility or SHARP repair service.

NOTAS AL MANEJARLA

A fin de que su calculadora SHARP funcione sin averas, le recomendamos lo siguiente: 1. Evite dejar la calculadora en ambientes en que haya cambios de temperatura, humedad y polvo bastante notables. 2. Al limpiar la calculadora, utilice un pao suave y seco. No use disolventes ni tampoco un pao hmedo. 3. Debido a que este producto no es a prueba de agua, no deber ser utilizado o guardado en lugares donde pudiera ser salpicado por lquidos como, por ejemplo, agua. Las gotas de lluvia, salpicaduras de agua, jugos o zumos, caf, vapor, transpiracin, etc. tambin perjudican el funcionamiento del producto. 4. Si necesita reparar esta unidad, dirjase slo a un distribuidor SHARP, a un centro de servicio autorizado por SHARP o a un centro de reparaciones SHARP. SHARP no ser responsable de ningn dao imprevisto o resultante, en lo econmico o en propiedades, debido al mal uso de este producto y sus perifricos, a menos que tal responsabilidad sea reconocida por la ley.
COST PRICE ENTRY KEY: Press this key to enter the cost price. SELLING PRICE ENTRY KEY: Press this key to enter the selling price. MARGIN ENTRY KEY: Press this key to enter the margin. CHANGE CALCULATION KEY: To see how much change to return, have the price amount displayed, then enter the pay amount, followed by this key. The change is calculated in accordance with the DECIMAL / ADD MODE SELECTOR setup as well as the ROUNDING SELECTOR setup. The intermediate result of an addition or subtraction in the Change calculation is retained. While the POWER SWITCH / PRINT / ITEM COUNT MODE SELECTOR is placed in P or PIC, the pay amount is printed after and the change printed with CG. Note: The displayed change value will not be added to the grand total memory. DISPLAY SYMBOLS: M : Appears when a number is in the memory. : Appears when a number is negative. : Appears when a number is in the grand total memory. : Appears when an overflow or other error is detected. G E

2. Press the RESET switch located on the back of the unit. (See RESETTING THE UNIT.) * The clock starts, indicating the current date and time as January 1, 2008, 12:00:00 a.m.
Adjusting date and time Example: When the date is September 15, 2007, and the time is 3:38 p.m. Operation

Display

Visualizacin
1) Set the power switch to OFF. 2) Remove the printer cover. (Fig. 1) 3) Hold the top of the ink roller and remove the roller by pulling it toward you and then upward. (Fig. 2) 4) Install the new ink roller in the correct position. Make sure that the roller is securely in place. (Fig. 3) 5) Put back the printer cover.

9-15-2007 3-P 0.

(see GRAND TOTAL / RATE SETTING MODE SELECTOR) * When the adjustment is complete, the clock starts at 3:38:00 p.m.
(consulteSELECTOR DEL MODO DE TOTAL GLOBAL / FIJACIN DE TASA) * Cuando finalice el ajuste, el reloj comenzar a funcionar a las 3:38:00 p.m. Fig. 1 Fig. 2 Fig. 3

OPERATING CONTROLS

OFF P PIC ON
CONTROLES DE FUNCIONAMIENTO
Cleaning the printing mechanism If the print becomes dull after long time usage, clean the printing wheel according to the following procedures: 1) Remove the printer cover and the ink roller. 2) Install the paper roll and feed it until it comes out of the front of the printing mechanism. 3) Hold a small brush (like a tooth brush) lightly to the printing wheel and clean it by pressing. 4) Put back the ink roller and the printer cover. Note: Do not rotate the printing mechanism manually, this may damage the printer.
Limpieza del mecanismo de impresin Si la impresin se debilita despus de usar la calculadora durante largo tiempo, limpie la rueda de impresin de acuerdo con el siguiente procedimiento: 1) Quite la tapa de la impresora y el rodillo entintador. 2) Instale el rollo de papel y hacerlo avanzar hasta que salga por la parte delantera del mecanismo de impresin. 3) Apoye un cepillo pequeo (similar a un cepillo de dientes) ligeramente sobre la rueda de impresin y lmpiela pulsando. 4) Vuelva a colocar el rodillo entintador y la tapa de la impresora. Nota: No trate de girar la rueda de impresin manualmente, ya que de lo contrario podra daar la impresora.

POWER SWITCH; PRINT / ITEM COUNT MODE SELECTOR:
INTERRUPTOR DE LA ALIMENTACIN; SELECTOR DEL MODO DE IMPRESIN / MODO PARA CONTAR ARTCULOS:
OFF: Power OFF : Power ON. Set to the non print mode. P: Power ON. Set to the print mode. PIC: Power ON. Set to the print and item count mode. 1) For addition or subtraction, each time is pressed, 1 is added to the item counter, and each time is pressed, 1 is subtracted. The count is printed when the calculated result is obtained. Pressing of , clears the counter. 2) When the grand total/rate setting mode selector is in the ON position (GT), the counter will count the number of times that the calculation results have been stored in the grand total memory. To print and clear the count, press the key. 3) The memory item counter will count the number of times that the key has been pressed in the addition. Note: Each time the key is used in the subtraction, 1 will be subtracted from the count. The count is printed when the memory is recalled. Pressing of the key clears the counter. Note: The counter has a maximum capacity of 3 digits (up to 999). If the count exceeds the maximum, the counter will recount from zero.
OFF: Apagado (OFF) : Encendido (ON). Fija el modo de no impresin. P: Encendido (ON). Fija el modo de impresin. PIC: Encendido (ON). Fija el modo de impresin y de cuenta de artculos. 1) En las sumas o restas, cada vez que se pulse se aadir 1 al contador de artculos, y cada vez que se pulse se restar 1. La cuenta queda impresa cuando se obtiene el resultado calculado. Al pulsar , se borra el contenido del contador. 2) Cuando est activado el selector del modo de total global/fijacin de tipos (posicin GT), el contador contar el nmero de veces que se han almacenado los resultados de clculo en la memoria del total global. Para imprimir y borrar la cuenta, apretar la tecla. 3) El contador de artculos en memoria contar el nmero de veces que la tecla ha sido apretada en la suma. Notas: Cada vez que se use la tecla en la resta, 1 ser restado de la cuenta. La cuenta queda impresa al llamarse la memoria. Apretando la tecla se borra el contador. Nota: El contador tiene una capacidad de un mximo de 3 dgitos (hasta 999). Si la cuenta excede el mximo, el contador vuelve a contar partiendo de cero.

PAPER ROLL REPLACEMENT

Never insert paper roll if torn. Doing so will cause paper to jam. Always cut leading edge with scissors first. 1) Insert the leading edge of the paper roll into the opening. (Fig. 1) 2) Turn the power on and feed the paper by pressing. (Fig. 2) 3) Lift the attached metal paper holder up and insert the paper roll to the paper holder. (Fig. 3)

B. (123 1368) 100 = 123. 123 1,368 % 899
EXAMPLE 3: Determine the margin when the cost price is set at $350, and the selling price at $500. Cost price Selling Price Margin Also, obtain the margin when the cost price is set to $250. EJEMPLO 3: Determine el margen cuando el precio de coste es de 350 euros y el precio de venta es de 500 euros. precio de coste precio de venta margen Adems, obtenga tambin el margen cuando el valor del precio de coste se establezca en 250 euros.

350 500

350. 500.

350 C %

ITEM COUNT CALCULATION CLCULO DE CUENTA DE ARTCULOS
Bill No. Nm. de factura 5 Total Number of bills Nm. de facturas 1 (a) Amount Importe $100.55 $200.00 $200.00 $400.55 $500.65 (b)

250 C %

50. : Entries in the order of : Las introducciones en el orden de 500 are also valid. 350 tambin son vlidas.

SPECIFICATIONS

Operating capacity: 12 digits Power supply: Operating: AC: Local voltage with AC adaptor EA-65A / 28A 6V. (DC): Manganese dry battery, size AA (or R6) 4 (Option) Memory backup: 3V. (DC): (Lithium battery CR2032 1) Memory Protection Battery lifespan: About 2,500 hours (While at 25C(77F), no operating battery is installed, and the AC adaptor is not connected.) CLOCK SECTION Accuracy: Within 60 seconds per month average (at 25C(77F)) Items to be displayed: month, day, year, hour, minute, second, a.m. A, p.m. P Items to be printed: month, day, year, hour, minute, a.m. , p.m. Time system: 12-hour PRINTING SECTION Printer: Mechanical printer Printing speed: Approx. 2 lines/sec. (At temperature 25C(77F), when 7419 + is printed. An AC adaptor EA-65A is used. The printing speed will vary with the number of rows and the figure types to be printed.) Printing paper: 57mm (2-1/4") 58mm (2-9/32") wide 80mm (3-5/32") in diameter (max.) Operating temperature: 0C 40C (32F 104F) Power consumption: 6V. (DC): 1.8 W Operating time: Manganese dry battery, size AA (or R6) Approx. 4,500 hours (in non-print mode, displaying 555555 at 25C (77F) ambient temperature) Operating time depends on the type of battery and type of use. Dimensions: 150 mm (W) 230 mm (D) 51.5 mm (H) (5-29/32" (W) 9-1/16" (D) 2-1/32" (H)) Weight: Approx. 533 g (1.18 Ib.) (with batteries) Accessories: 1 lithium battery (installed), 1 paper roll, 1 ink roller (installed), AC adaptor EA-65A, and operation manual

EXAMPLE 2: How much do you return from $100 for a purchase of five items costing $15 each? EJEMPLO 2: Cunto tiene que devolver si le entregan $100 para adquirir cinco artculos que cuestan $15 cada uno? FA
*3 : Press to clear the memory before starting a memory calculation. *3 : Pulse para borrar la memoria antes de empezar a efectuar un clculo con memoria.

RESETTING THE UNIT

Strong impacts, exposure to electrical fields, or other unusual conditions may render the unit inoperative, and pressing the keys will have no effect. If this occurs, you will have to press the RESET switch on the bottom of the unit. The RESET switch should be pressed only when: an abnormal event occurs and all keys are disabled. Notes: Pressing the RESET switch will clear the date and time settings, the tax rate setting, and the memory contents. Use only a ballpoint pen to press the RESET switch. Do not use anything breakable or anything with a sharp tip, such as a needle. After the RESET switch is pressed, connect the AC adaptor. Turn the power switch ON and check that 0. is displayed.

REPOSICIN DE LA UNIDAD

Los impactos fuertes, la exposicin a campos elctricos u otras condiciones inusuales pueden ser la causa de que la unidad no funcione, y pulsar las teclas no servir de nada. Si pasa esto, tendr que pulsar el interruptor RESET de la parte inferior de la unidad. El interruptor RESET slo deber pulsarse cuando: Se produzca alguna anormalidad y no funcione ninguna tecla. Notas: Si pulsar el interruptor RESET, se borrarn los ajustes de la fecha, la hora, la tasa de impuestos, y el contenido de la memoria. Use solamente un bolgrafo para pulsar el interruptor RESET. No use nada que pueda romperse ni tampoco algo muy puntiagudo como, por ejemplo, una aguja. Despus de pulsar el interruptor RESET, conecte el adaptador de CA. Ponga el interruptor de la alimentacin en ON y compruebe que se visualice 0. 100

75. CG 25.

TAX RATE CALCULATIONS CLCULOS CON LA TASA DE IMPUESTOS
EXAMPLE 1: Set a 5% tax rate. Calculate the tax on $800 and calculate the total including tax. EJEMPLO 1: Establezca una tasa de impuestos del 5%. Calcule el impuesto sobre $800 y calcule el total incluyendo el impuesto.

TAX 5.000

5000 %

LIMITED WARRANTY

CALCULATION EXAMPLES
1. Set the decimal selector as specified in each example. The rounding selector should be in the 5/4 position unless otherwise specified. 2. The grand total/rate setting mode selector should be in the position (off) unless otherwise specified. 3. The print / item count mode selector should be in the P position unless otherwise specified. prior to beginning any calculation. 4. Press or and enter the correct 5. If an error is made while entering a number, press number. , or to activate the Cost/Sell/Margin 6. After entering a value, press key must be Calculation mode. In case of performing different calculation tasks, pressed first to cancel the Cost/Sell/Margin mode. 7. Example procedures are listed in following manner unless otherwise specified. Operation Display Print

EJEMPLOS DE CLCULOS

1. Coloque el selector decimal segn se especifica en cada ejemplo. El selector de redondeo debe estar en la posicin 5/4 salvo que se especifique lo contrario. 2. El selector del modo de total global/tasa deber estar en la posicin (desconexin) salvo que se especifique lo contrario. 3. El selector de impresin / cuenta de artculos deber estar en la posicin P salvo que se especifique lo contrario. antes de empezar cualquier clculo. 4. Pulse o e introduzca el nmero 5. Si se comete un error al introducir un nmero, pulse correcto. , o para activar el modo de clculo 6. Despus de introducir un valor, pulse de coste/venta/margen. En el caso de realizar clculos diferentes, deber pulsarse para cancelar el modo de coste/venta/margen. primero la tecla 7. Los procedimientos de ejemplos estn puestos de la siguiente manera, a menos que se especifique lo contrario. Operacin Visualizacin Impresin

800 TAX+ 840.

800 40 840
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the Product), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Your Product : Warranty Period for this Product : Electronic Calculator Six (6) months parts and labor from date of purchase.

EXAMPLE 2: Perform two calculations using $840 and $525, both of which already include tax. Calculate the tax on the total and the total without tax. (tax rate: 5%) EJEMPLO 2: Realice dos clculos utilizando $840 y $525, los cuales ya incluyen impuesto. Calcule et impuesto sobre el total y el total sin impuesto. (tasa de impuestos: 5%) FA

840 525

840. 1365.

TAX 1300.

840 + 525 + , 65 1,300
PRINTING DATE AND TIME IMPRESIN DE LA FECHA Y LA HORA
EXAMPLE: When on October 20, 2008, 1:52:00 p.m. EJEMPLO: En el 20 de octubre de 2008, a las 1:52:00 p.m. *1 10-20-2008. 0. 1-P. 0.
ADDITION AND SUBTRACTION WITH ADD MODE SUMA Y RESTA CON MODO DE SUMA
12.45 + 16.24 + 19.35 5.21 = *2 #10202008 12.45 28.69 48.04 42. 4283
Additional Items Excluded from Warranty Coverage :
Any consumable items such as paper, maintenance cartridge, ink cartridges supplied with the Product or to any equipment or any hardware, software, firmware, fluorescent lamp, power cords, covers, rubber parts, or peripherals other than the Product. At a Sharp Authorized Servicer located in the United States. To find out the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP.

+ + +

Where to Obtain Service :

www.sharpusa.com

For your convenience, Genuine Sharp Supplies. Accessories, and additional Sharp Products can be purchased from the Authorized Sharp Reseller where you purchased your product or on-line at:
What to do to Obtain Service : Ship (prepaid) or carry in your Product to a Sharp Authorized Servicer. Be sure to have proof of purchase available. If you ship or mail the Product, be sure it is packaged carefully. TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
#152 - - - - - - - - - - - 42.83 *2 : *2 : La was not used in the entries. no ha sido usada en las introducciones.
*1: If the date is not shown on the display, press to show the date. para hacer que se indique. *1: Si la fecha no se muestra en el visualizador, pulse

www.sharpplace.com

EL-1750V(U1U)-2

Page 2

9 9. , , , , , , 9 9. , , , , , ,

Printing Calculator Mail-in Rebate Calculator Calculator Calculator Calculator Calculator
on Sharp Printing Calculators
Models: EL-1750V, EL-1801V, EL-1197PIII, EL-2196BL, and EL-2630PIII Offer Valid 1/1/11 through 4/2/11
See back panel for details.
*Does not apply to purchases made at OfficeMax, Staples, Staples.com, or membership warehouse clubs.

Mail-in Rebate*

To receive your rebate check you must:
1. Purchase a qualifying SHARP brand Printing Calculator from eligible stores between 1/1/11 and 4/2/11 2. Enclose a clear copy of your dated sales receipt. Keep the original for your records. 3. Enclose the original UPC symbol cut from the package (including the numbers below the UPC symbol).
Cut out the UPC symbol and numbers below it found on the back panel
For rebate questions call: 1-866-745-5452 or check your status online at: www.rebate-zone.com/sharp Name Address City Store Name Email Address
(will be used to confirm receipt of this submission)

Model Purchased

7400012345
4. Enclose this completed coupon. Rebate offer and qualifying models: $5 $10 $15 EL-1750V or EL-1801V EL-1197PIII, EL-2196BL EL-2630PIII Sharp Printing Calculator Rebate Dept. H640374 P.O. Box 100489 White Bear Lake, MN 55110-0489
Thank you for your business. If you would like to receive future emails from Sharp Electronics on special money saving offers and product information, please check the space provided.
OFFER APPLIES ONLY TO MODELS LISTED. Offer is available only on purchases of a qualifying SHARP Printing Calculator from eligible stores (not valid at Staples, Staples.com, OfficeMax or Membership warehouse clubs) and cannot be combined with any other rebate offer. SHARP distributors and dealers may not participate in this offer. This coupon must accompany your request. Sales receipt must be dated between January 1, 2011 and April 2, 2011. Please allow 6-8 weeks for receipt of check. Limit one rebate per household, except where prohibited by law. Requests for rebate must be postmarked on or before May 2, 2011. Offer subject to availability. Void where prohibited. Offer good only on purchases within U.S., its territories, and possessions. Not responsible for lost or misdirected mail.

Send to:

Sharp is a registered trademark of Sharp Corporation.