TI-5630

Guidebook Manuel dinstructions Manual de instrucciones Manual de instrues English, Franais, Espaol, Portugus
Antes de usar (o ensamblar) el producto lea cuidadosamente este instructivo
1998, 2000 Texas Instruments Incorporated
50194LCV.DOC TI-5019 4L Front Cover Robin Hunt-Smith Revised: 04/12/00 5:19 PM Printed: 06/23/00 9:59 AM Page 1 of 2

Getting Started

Installing the Paper Roll 1. Remove the printer compartment cover. 2. Lift the paper holder so that it extends behind the printer compartment. 3. Remove any packing materials from the printer compartment. 4. Replace the printer compartment cover. 5. Plug the calculator into an electrical outlet. 6. Set the power switch on the right side of the calculator to on (P). 7. Place the paper roll on the paper holder as shown below. 8. Insert the end of the paper into the paper slot on the back of the calculator above the black bar. To avoid paper jams, use quality bond paper.
9. Feed the paper into the slot; then press and hold &.
Note To prevent damaging the printer (which may void the warranty), when operating the calculator without paper, move the PRINTER switch to OFF.
Replacing the Ink Roller 1. Set the power switch on the right side of the calculator to off (S). 2. Remove the printer compartment cover. 3. Lift the removal tab on the old ink roller and remove the roller, as shown in the following illustration.
4. Lower the new ink roller into the compartment and press down gently until it snaps into place. 5. Replace the printer compartment cover.
Note Do not refill old ink rollers. New rollers are available from local retailers.

Key Descriptions

& 2 O > I = # ( 4 Advances the paper. Clears the entire pending operation except the memory or the grand total. Changes the sign (+ or ) of the displayed number. Interprets the number in the display as a percentage. Clears an entry or an error or overflow. Computes the percentage of change between two values. (The price increase from 9.75 to 11.25 is 1.50 and the percentage increase is 15.38%.) Calculates the selling price and profit or loss amount on an item. Removes the last digit entered in the display. Prints a reference number or date without affecting calculations. 2
ENG5630.DOC TI-5630 Guidebook, UK English Texas Instruments Inc Revised: 06/23/00 1:04 PM Printed: 06/23/00 1:05 PM Page 2 of 8

! " / : E 0 ; F N

Adds the stored tax rate to the value in the display. Subtracts the stored tax rate from the value in the display. Pressed once, displays and prints the grand total of all totals. Pressed twice, clears the grand total. This is active only if PRINTER = GT. Displays and prints the total, but does not clear the total. Displays and prints the total and clears the total. If PRINTER = IC, also resets the item counter (IC) to zero. Displays and prints the value in memory and clears the memory. Also clears M from the display and resets the memory item count to zero. Displays and prints the subtotal in memory but does not clear the memory. Subtracts the displayed value from memory. If a multiplication or division operation is pending, F completes it and subtracts the result from memory. Adds the displayed value to memory. If a multiplication or division operation is pending, N completes it and adds the result to memory.
Using Decimals (DECIMAL Switch)
Lets you add and subtract numbers without entering the decimal point (key in 5321 to enter 53.21). The number of decimal places varies based on the result. F 0,2,3,4,6 Sets the number of decimal places to 0, 2, 3, 4, or 6.

Rounding (ROUND Switch)

: 5/4 9
Results are rounded down (if DECIMAL = 1, 2.33 rounds to 2.3). Results are rounded up or down, depending on the value and decimal setting (if DECIMAL = 2, 2.349 rounds to 2.35). Results are rounded up (if DECIMAL = 1, 2.33 rounds to 2.4).
Entering a Tax Rate (TAX Switch)

SET CALC

Lets you enter a tax rate to perform tax calculations. Stores the tax rate. 3
ENG5630.DOC TI-5630 Guidebook, UK English Texas Instruments Inc Revised: 06/23/00 1:04 PM Printed: 06/23/00 1:05 PM Page 3 of 8
Printing (PRINTER Switch)

OFF ON IC GT

Calculations are displayed but not printed. Calculations are displayed and printed. Both the printer and item counter are active. To clear the item counter, press E or 0. Accumulates a running grand total of all calculations you perform until you clear the grand total. To print a grand total, press /. To clear the grand total, press / again.
Clearing Errors and Overflows
Correcting Entry Errors If you have not pressed an operation key: To clear an incorrect entry, press I. To clear the last digit, press (. If you have pressed an operation key: To cancel an incorrect entry, press the opposite operation key. This applies only to calculations involving 9,., N, or F. Error and Overflow Conditions and Indicators If you divide by zero or calculate a selling price using a margin of 100%, an error occurs. The calculator prints ERROR 0.* and displays E and 0. An overflow occurs if you calculate a result with too many digits for the calculator to display or print. When this occurs, the calculator: Displays E and the first 12 digits of the result with a decimal point 11 places to the left of its correct position. Prints ERROR and the first 12 digits of the result with the decimal shifted 11 places to the left of its correct position.

To clear an error or overflow, press 2. The memory is not cleared unless the error or overflow occurred in a memory calculation.
ENG5630.DOC TI-5630 Guidebook, UK English Texas Instruments Inc Revised: 06/23/00 1:04 PM Printed: 06/23/00 1:05 PM Page 4 of 8
Performing Basic Calculations
Addition and Subtraction 12.41 3.95 + 5.40 = 13.86 DECIMAL = +, ROUND = 5/4, TAX = CALC, PRINTER = IC, Press Display Print

9 395. : E

12.41 8.8.46 13.13.86
12.41 3.95 8.46 5.40 13.86

+ U +

Multiplication and Division 11.32 Q (6) P 2 = 33.96 DECIMAL = F, ROUND = 5/4, TAX = CALC, PRINTER = ON Press Display Print

2 11.32 ? 6O' 23

11.32 67.92 33.96

11.32 6. 2. 33.96

Q P =
Squares 2.= 6.25 Press Display Print

2 2.5 ? 3 6.25

Reciprocals 1/25 = 0.04 Press Display

2.5 2.5 6.25

0.04 5

25. 25. 1. 1. 0.04

P = =
ENG5630.DOC TI-5630 Guidebook, UK English Texas Instruments Inc Revised: 06/23/00 1:04 PM Printed: 06/23/00 1:05 PM Page 5 of 8

Using Memory Operations

DECIMAL = 2, ROUND = 5/4, TAX = CALC, PRINTER = ON Multiplication with Memory Keys You need the total of three items at
10.50 and five items at 4.95. By using the memory keys, you will not disturb a current calculation.

Press Display Print

0 10.5 ? 3 N M 4.95 ? 5 N M ; 4.95 ? 5 F M 0 24.75 31.50 M 24.75 56.25 31.50
10.5 x 3. = 31.50 M+ 4.95 x 5. = 24.75 M+ 56.25 MU 4.95 x 5. = 24.75 M 31.50 M
0 prints the current memory total and clears the memory. You calculate a memory subtotal to see the current total amount of your order. You decide not to order the last item.
Calculating Gross Profit Margin
DECIMAL = 2, ROUND = 5/4, TAX = CALC, PRINTER = ON Calculating a Profit Amount An item cost you 65.00. You want to
earn a 40% profit. Calculate the selling price.

# 40 3

65. M 40. % 43.333333333 @ 108.33

108.33

ENG5630.DOC TI-5630 Guidebook, UK English Texas Instruments Inc Revised: 06/23/00 1:04 PM Printed: 06/23/00 1:05 PM Page 6 of 8
Calculating a Loss Amount An item cost you 35,000. You must sell it, but can only afford to lose 33.3%. Calculate the selling price. Press Display Print

# 33.3 O 3

35,000.
35,000. M 33.3 % 8,743.435859 @ 26,256.56

26,256.56

Calculating Percentages
DECIMAL = F, ROUND = 5/4, TAX = CALC, PRINTER = ON Percent 49 x 15% Press Display Print

? 15 >

49. 7.35

49. 15. 7.35