Reviews & Opinions
Independent and trusted. Read before buy DSC PC1555MX!

DSC PC1555MX

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
DSC PC1555MX - V2.3, size: 905 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

DSC PC1555MXAbout DSC PC1555MX
Here you can find all about DSC PC1555MX like installation manual and other informations. For example: .

DSC PC1555MX manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a DSC PC1555MX please write about it to help other people.

 

[ Report abuse or wrong photo | Share your DSC PC1555MX photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

W A R N I N G

This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read.

Instruction Manual

PC1555/PC1555MX

Software Version 2.3

LIMITED WARRANTY
Digital Security Controls Ltd. warrants the original purchaser that for a period of twelve months from the date of purchase, the product shall be free of defects in materials and workmanship under normal use. During the warranty period, Digital Security Controls Ltd. shall, at its option, repair or replace any defective product upon return of the product to its factory, at no charge for labour and materials. Any replacement and/or repaired parts are warranted for the remainder of the original warranty or ninety (90) days, whichever is longer. The original purchaser must promptly notify Digital Security Controls Ltd. in writing that there is defect in material or workmanship, such written notice to be received in all events prior to expiration of the warranty period. There is absolutely no warranty on software and all software products are sold as a user license under the terms of the software license agreement included with the product. The Customer assumes all responsibility for the proper selection, installation, operation and maintenance of any products purchased from DSC. Custom products are only warranted to the extent that they do not function upon delivery. In such cases, DSC can replace or credit at its option. or repaired in such a manner as to adversely affect performance or prevent adequate inspection or testing to verify any warranty claim. Access cards or tags returned for replacement under warranty will be credited or replaced at DSC's option. Products not covered by this warranty, or otherwise out of warranty due to age, misuse, or damage shall be evaluated, and a repair estimate shall be provided. No repair work will be performed until a valid purchase order is received from the Customer and a Return Merchandise Authorisation number (RMA) is issued by DSC's Customer Service. Digital Security Controls Ltd.s liability for failure to repair the product under this warranty after a reasonable number of attempts will be limited to a replacement of the product, as the exclusive remedy for breach of warranty. Under no circumstances shall Digital Security Controls Ltd. be liable for any special, incidental, or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability, or any other legal theory. Such damages include, but are not limited to, loss of profits, loss of the product or any associated equipment, cost of capital, cost of substitute or replacement equipment, facilities or services, down time, purchasers time, the claims of third parties, including customers, and injury to property. The laws of some jurisdictions limit or do not allow the disclaimer of consequential damages. If the laws of such a jurisdiction apply to any claim by or against DSC, the limitations and disclaimers contained here shall be to the greatest extent permitted by law. Some states do not allow the exclusion or limitation of incidental or consequential damages, so that the above may not apply to you.

Digital Security Controls Ltd. will at its option repair or replace out-ofwarranty products which are returned to its factory according to the following conditions. Anyone returning goods to Digital Security Controls Ltd. must first obtain an authorization number. Digital Security Controls Ltd. will not accept any shipment whatsoever for which prior authorization has not been obtained. Products which Digital Security Controls Ltd. determines to be repairable will be repaired and returned. A set fee which Digital Security Controls Ltd. has predetermined and which may be revised from time to time, will be charged for each unit repaired. Products which Digital Security Controls Ltd. determines not to be repairable will be replaced by the nearest equivalent product available at that time. The current market price of the replacement product will be charged for each replacement unit.
Items Not Covered by Warranty
In addition to the items which void the Warranty, the following items shall not be covered by Warranty: (i) freight cost to the repair centre; (ii) products which are not identified with DSC's product label and lot number or serial number; (iii) products disassembled
About Your Security System
Your DSC security equipment has been designed to provide you with the greatest possible flexibility and convenience. Read this manual carefully and have your installer instruct you on your systems operation and on which features have been implemented in your system. All users of this system should be equally instructed in its use. Fill out the System Information page with all of your zone information and access codes and store this manual in a safe place for future reference.

Fire Detection

This equipment is capable of monitoring fire detection devices such as smoke detectors and providing a warning if a fire condition is detected. Good fire detection depends on having adequate number of detectors placed in appropriate locations. This equipment should be installed in accordance with N.F.P.A. standard #72. (N.F.P.A., Batterymarch Park, Quincey MA 02269). Carefully review the Family Escape Planning guidelines in this manual. NOTE: Your installer must enable the fire detection portion of this equipment before it will work.

Zone Information

There are ________ active zones on the system. Zone 2 Protected Area ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ Zone Type _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________
___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________
_____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________ _____________________________________

Stay Arming

This feature, if enabled by your installer, will allow you to arm the perimeter zones while leaving the interior zones inactive so that you can remain on the premises while the system is armed. When you enter your security code to arm the system, or press the "Stay" button on the keypad, and do not exit the premises through a designated Exit/Entry door, the system will arm in the Stay mode, automatically bypassing the interior zones. The interior zones can be reactivated at any time by entering [][1] at any keypad. If you reactivate the interior zones, do not go into areas covered by motion detectors. To access areas protected by motion sensors, you must enter your security code and disarm the system.
Arming Without Entry Delay
If you wish to arm your system without the entry delay, enter [][9] then your access code. The Armed light will flash as a reminder that the system is armed and has no entry delay. An entry through any zone programmed as a delay zone will create an instant alarm.

Quick Arm

When the Quick Arm feature is enabled, you may arm the system by simply pressing [][0] instead of your access code. Please note that pressing [][0] will only allow you to arm the system; to disarm, you must enter a valid access code. Your installer will inform you if the Quick Arm feature has been enabled on your system.

Quick Exit

When the Quick Exit feature is enabled, pressing [][0], or the "Exit" button on the keypad, while the system is armed will provide a two-minute window for you to exit the premises. During this time, you may only open and close the designated Entry/Exit door once. Once the door is closed, the panel will end the two-minute quick exit delay. If the door is opened again, or if the door is not closed after two minutes, or if another delay zone is opened, the panel will begin the entry delay. Your installer will inform you if the Quick Exit feature has been enabled on your system.

Disarming the System

Disarming from an LED or Fixed Message LCD5501Z keypad:
Enter the premises through a designated Exit/Entry door. Entering by any other door will sound an immediate alarm. As soon as the Exit/Entry door is opened, the keypad will beep to indicate that the system should be disarmed. Go to the keypad and enter your access code. If you made an error entering your code, re-enter the code correctly. As soon as the correct code is entered, the Armed light will go out and the keypad will stop beeping. The correct access code must be entered before the entry delay period expires. If a valid access code is not entered during this time, the system will go into alarm. Your installer can change the entry time delay. If an alarm occurred while the system was armed, the Memory light and the zone light corresponding to the zone that caused the alarm will flash for 30 seconds. After the 30-second period, the Memory light and zone light will stop flashing and the panel will return to the Ready state. Pressing the [#] key during the 30 second period will cancel the alarm memory display. To view other alarms, press [][3]. If a trouble was detected when the panel is disarmed, the Trouble light will turn ON (See Viewing Trouble Conditions on page 11 to determine the source of the trouble.) Please note that troubles will not display while the system is in the Alarm Memory Display mode.

Emergency Keys (PC1555RKZ)
Press the [F]* key for 2 seconds to send a FIRE transmission. Press the [A]* key for 2 seconds to send an AUXILIARY transmission. Press the [P]* key for 2 seconds to send a PANIC transmission.

PC5516Z LED Keypad

PC5532Z LED Keypad
The PC5516Z and PC5532Z Keypads are available for applications with more than 8 zones. The functions explained in this manual are the same for all three LED keypad types.
LCD5501Z Fixed Message Keypad

LCD5500Z Keypad

The Liquid Crystal Display (LCD) displays prompts and system information on two 16 character lines. If < > appears, more information can be accessed by using the arrow (< >) keys. Press [<] to see the previous function or item of information. Press [>] to advance the display to next function or item of information. Press the keys on the number pad as prompted by the LCD display to view alarms or troubles, to arm and disarm the system and to bypass zones. To exit a function and return to the Ready state, press [#]. To select a function press [].

Emergency Keys

Press both * keys for 2 seconds to send a FIRE transmission. Press both * keys for 2 seconds to send an AUXILIARY transmission. Press both * keys for 2 seconds to send a PANIC transmission. * IMPORTANT NOTE (All Keypads): The Fire, Auxiliary and Panic keys will NOT function unless programmed by the installer. If these keys are in service and the installer has enabled audible feedback, holding down the key for two seconds will cause the keypad sounder to beep indicating that the input has been accepted and transmission is underway. The [A] and keys are programmed to be used for non-medical emergencies only in the United States, as per UL requirements.
Display Lights (All Keypads)
Ready Light If the Ready light is ON, the system is ready for arming. The system cannot be armed unless the Ready light is ON (see 'Arming the System' on page 4). Armed Light If the Armed light is ON, the system has been armed successfully. Trouble or System Light If the Trouble light is ON, see Viewing Trouble Conditions on page 11.

(*2) to View <> View Trouble <> Use the arrow (< >) keys to view which troubles are present on the system. Once you Trouble Message have scrolled through the list of troubles, press the [#] key to exit the Trouble Viewing
mode and return to the Ready state.
Setting the System Date and Time
To set the system time, enter [][6] followed by the Master Code. Press [1]. The keypad will now accept 10 consecutive digits: Enter the Time in Hours and Minutes using the 24-hr format (00:00 to 23:59). Enter the Date in Months, Days and Years (MM DD YY). NOTE: If you have an LCD keypad, your installer may have programmed your system to display the time and date while the keypad is idle. If this is the case, you may have to press the [#] key to clear the date and time before entering an access code to arm the system, or before performing any other keypad function. 12

Testing Your System

Alarm Test
The Alarm Test provides two-second tests of the keypad sounder and bell or siren. Begin with the panel in the Ready state. From an LED keypad, Enter [][6][Master Code][4] then press [#] to return to the Ready state. From an LCD keypad, press [] to enter the function list. Use the arrow (< >) keys to scroll to find User Functions and press [] to select. Enter your Master Code and scroll to find the following message.
Select Option <> Press [] to perform an Alarm Test. The keypad will display the following message. System Test System Test In Progress
Press [#] to return to the Ready state.

Full System Test

We recommend that you test your system weekly. Should the system fail to function properly, call your installation company immediately for service. NOTE: Perform system tests during off-peak hours, such as early morning or late evening. 1. Inform the monitoring station that you are testing your system. 2. Begin with the system in the Ready state. 3. Perform a Bell/Battery test by pressing [][6][Master Code][4]. The bell and keypad buzzer will sound for two seconds and all keypad lights will turn ON. Press [#] to exit. 4. Activate each sensor in turn (e.g. open a door/window or walk in motion detector areas). From an LED keypad, observe the zone light turn ON when the zone is activated. The zone light will turn OFF when the system restores to normal (i.e. door or window closed). From an LCD keypad, the following message will be displayed when each zone is activated. Use the arrow (< >) keys to view which zone is open. This message will disappear Secure System Before Arming <> when the zone is restored. 5. If the panel has any fire zones, activation will cause the alarm signal to sound in a pulsed mode. CAUTION: Do not use an open flame or burning materials to test a smoke or heat detector. Contact your installer for information on safe methods of testing detectors. 6. When testing is complete, call and advise the monitoring station. Should the system fail to function properly, contact your installer. NOTE: Some features described above will not be functional unless enabled by your installer. Please ensure that your installer has advised you which features are functional on your system.

Door Chime Feature

The door chime feature is used to provide a tone from the keypad each time a door or window is opened or closed. Your installer will program which doors and windows will activate the door chime.
To activate the door chime from an LED or Fixed Message LCD5501Z keypad:
Enter [][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is disabled.
To activate the door chime from an LCD Keypad:
Press [] to enter the function list, then scroll to find. Press (*) For<> Press [] or [4] to enable or disable the Door Chime feature. Press [#] to return to the Door Chime Ready state.

Fire Alarm Operation

NOTE: The description below may not be applicable depending on how your installer has programmed the fire alarm operations on your system. Ask your installer for more information regarding your systems operation.
During a fire alarm, the bell or siren will pulse ON and OFF. The transmission of the alarm to the monitoring station is delayed for 30 seconds. If the alarm is not cleared within the 30-second delay, it will be transmitted to the monitoring station.

Silence

To silence the bell or siren, press the [#] key. If the alarm is silenced and the smoke detector is not reset, the alarm will resound after 90 seconds.
Resetting Smoke Detectors
Once the smoke detector is reset, if it still detects smoke, the alarm sequence will resound as described above. If there is no smoke, the system will return to normal. To reset smoke detectors from an LED or Fixed Message LCD5501Z keypad: Press [][7][2]. To reset smoke detectors from an LCD Keypad: Press [] to enter the function list. Scroll to find:
Press (*) For <> Press [] to select the output control. The display will read. Output Control Select Output <> Use the arrow (< >) keys to find the following message and press the [] key to Command Output #1 select. Select Output <> Command Output #2
NOTE: If you suspect that a fire alarm has transmitted and that there is no fire condition, call the monitoring station to avoid an unnecessary response. If a fire condition is apparent, follow your evacuation plan immediately. If the alarm sounds at night, evacuate immediately.
Household Fire Safety Audit
Most fires occur in the home. To minimize this danger, we recommend that a household fire safety audit is conducted and a fire escape plan is developed. 1. Are all electrical appliances and outlets in a safe condition? Check for frayed cords, overloaded lighting circuits, etc. If you are uncertain about the condition of your electrical appliances or household service, have a professional evaluate these units. 2. Are all flammable liquids stored safely in closed containers in a well-ventilated cool area? Cleaning with flammable liquids should be avoided. 3. Are fire hazardous materials (matches) well out of reach of children? 4. Are furnaces and wood burning appliances properly installed, clean and in good working order? Have a professional evaluate these appliances. 14

Fire Escape Planning

There is often very little time between the detection of a fire and the time it becomes deadly. It is thus very important that a family escape plan be developed and rehearsed. 1. Every family member should participate in developing the escape plan. 2. Study the possible escape routes from each location within the house. Since many fires occur at night, special attention should be given to the escape routes from sleeping quarters. 3. Escape from a bedroom must be possible without opening the interior door. Consider the following when making your escape plans: Make sure that all perimeter doors and windows are easily opened. Ensure that they are not painted shut, and that their locking mechanisms operate smoothly. If opening or using the exit is too difficult for children, the elderly or handicapped, plans for rescue should be developed. This includes making sure that those who are to perform the rescue can promptly hear the fire warning signal. If the exit is above the ground level, an approved fire ladder or rope should be provided as well as training in its use. Exits on the ground level should be kept clear. Be sure to remove snow from exterior patio doors in winter; outdoor furniture or equipment should not block exits. Each person should know of a predetermined assembly point where everyone could be accounted for i.e.: across the street or at a neighbours house. Once everyone is out of the building, call the Fire Department. A good plan emphasizes quick escape. Do not investigate or attempt to fight the fire, and do not gather belongings or pets as this wastes valuable time. Once outside, do not re-enter the house. Wait for the fire department. Write the fire escape plan down and rehearse it frequently so that should an emergency arise, everyone will know what to do. Revise the plan as conditions change, such as the number of people in the home, or if there are changes to the buildings construction. Make sure your fire warning system is operational by conducting weekly tests (see Testing Your System on page 13). If you are unsure about system operation, contact your installing dealer. We recommend that you contact your local fire department and request further information on fire safety and escape planning. If available, have your local fire prevention officer conduct an inhouse fire safety inspection.

Maintenance

With normal use, the system requires minimum maintenance. The following points should be observed. 1. Do not wash the security station with a wet cloth. Light dusting with a slightly moistened cloth should remove normal accumulations of dust. 2. The battery/bell test is designed to determine battery condition. We recommended, however, that the stand-by batteries be replaced every three years. 3. For other system devices such as smoke detectors, passive infrared, ultrasonic or microwave motion detectors or glassbreak detectors, consult the respective manufacturers literature for testing and maintenance.

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. The user may find the following booklet prepared by the FCC useful: How to Identify and Resolve Radio/Television Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4. IMPORTANT INFORMATION This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a label that contains, among other information, the FCC registration number of this equipment. NOTIFICATION TO TELEPHONE COMPANY The customer shall notify the telephone company of the particular line to which the connection will be made, and provide the FCC registration number and the ringer equivalence of the protective circuit. FCC Registration Number: F53CAN-32028-AL-E Facility Interface Code: 02LS2 Ringer Equivalence Number: 0.1B Service Order Code: 9.0F USOC Jack: RJ-31X TELEPHONE CONNECTION REQUIREMENTS Except for the telephone company provided ringers, all connections to the telephone network shall be made through standard plugs and telephone company provided jacks, or equivalent, in such a manner as to allow for easy, immediate

NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. Industry Canada does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. User should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device, to prevent overloading. The termination on a loop may consist of any combination of devices subject only to the requirement that the total of the Load Numbers of all the devices does not exceed 100. The Load Number of this unit is 0.1B.
disconnection of the terminal equipment. Standard jacks shall be so arranged that, if the plug connected thereto is withdrawn, no interference to the operation of the equipment at the customers premises which remains connected to the telephone network shall occur by reason of such withdrawal. INCIDENCE OF HARM Should terminal equipment or protective circuitry cause harm to the telephone network, the telephone company shall, where practicable, notify the customer that temporary disconnection of service may be required; however, where prior notice is not practicable, the telephone company may temporarily discontinue service if such action is deemed reasonable in the circumstances. In the case of such temporary discontinuance, the telephone company shall promptly notify the customer and will be given the opportunity to correct the situation. ADDITIONAL TELEPHONE COMPANY INFORMATION The security control panel must be properly connected to the telephone line with a USOC RJ-31X telephone jack. The FCC prohibits customer-provided terminal equipment be connected to party lines or to be used in conjunction with coin telephone service. Interconnect rules may vary from state to state. CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES The telephone company may make changes in its communications facilities, equipment, operations or procedures, where such actions are reasonably required and proper in its business. Should any such changes render the customers terminal equipment incompatible with the telephone company facilities the customer shall be given adequate notice to the effect modifications to maintain uninterrupted service. RINGER EQUIVALENCE NUMBER (REN) The REN is useful to determine the quantity of devices that you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices that you may connect to your line, you may want to contact your local telephone company. EQUIPMENT MAINTENANCE FACILITY If you experience trouble with this telephone equipment, please contact the facility indicated below for information on obtaining service or repairs. The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094

I Smoke Detectors Smoke detectors that are a part of this system may not properly alert occupants of a fire for a number of reasons, some of which follow. The smoke detectors may have been improperly installed or positioned. Smoke may not be able to reach the smoke detectors, such as when the fire is in a chimney, walls or roofs, or on the other side of closed doors. Smoke detectors may not detect smoke from fires on another level of the residence or building. Every fire is different in the amount of smoke produced and the rate of burning. Smoke detectors cannot sense all types of fires equally well. Smoke detectors may not provide timely warning of fires caused by carelessness or safety hazards such as smoking in bed, violent explosions, escaping gas, improper storage of flammable materials, overloaded electrical circuits, children playing with matches or arson. Even if the smoke detector operates as intended, there may be circumstances when there is insufficient warning to allow all occupants to escape in time to avoid injury or death. I Motion Detectors Motion detectors can only detect motion within the designated areas as shown in their respective installation instructions. They cannot discriminate between intruders and intended occupants. Motion detectors do not provide volumetric area protection. They have multiple beams of detection and motion can only be detected in unobstructed areas covered by these beams. They cannot detect motion which occurs behind walls, ceilings, floor, closed doors, glass partitions, glass doors or windows. Any type of tampering whether intentional or unintentional such as masking, painting, or spraying of any material on the lenses, mirrors, windows or any other part of the detection system will impair its proper operation. Passive infrared motion detectors operate by sensing changes in temperature. However their effectiveness can be reduced when the ambient temperature rises near or above body temperature or if there are intentional or unintentional sources of heat in or near the detection area. Some of these heat sources could be heaters, radiators, stoves, barbeques, fireplaces, sunlight, steam vents, lighting and so on. I Warning Devices Warning devices such as sirens, bells, horns, or strobes may not warn people or waken someone sleeping if there is an intervening wall or door. If warning devices are located on a different level of the residence or premise, then it is less likely that the occupants will be alerted or awakened. Audible warning devices may be interfered with by other noise sources such as stereos, radios, televisions, air conditioners or other appliances, or passing traffic. Audible warning devices, however loud, may not be heard by a hearing-impaired person. I Telephone Lines If telephone lines are used to transmit alarms, they may be out of service or busy for certain periods of time. Also an intruder may cut the telephone line or defeat its operation by more sophisticated means which may be difficult to detect. I Insufficient Time There may be circumstances when the system will operate as intended, yet the occupants will not be protected from the emergency due to their inability to respond to the warnings in a timely manner. If the system is monitored, the response may not occur in time to protect the occupants or their belongings. I Component Failure Although every effort has been made to make this system as reliable as possible, the system may fail to function as intended due to the failure of a component. I Inadequate Testing Most problems that would prevent an alarm system from operating as intended can be found by regular testing and maintenance. The complete system should be tested weekly and immediately after a break-in, an attempted break-in, a fire, a storm, an earthquake, an accident, or any kind of construction activity inside or outside the premises. The testing should include all sensing devices, keypads, consoles, alarm indicating devices and any other operational devices that are part of the system. I Security and Insurance Regardless of its capabilities, an alarm system is not a substitute for property or life insurance. An alarm system also is not a substitute for property owners, renters, or other occupants to act prudently to prevent or minimize the harmful effects of an emergency situation.

System Failures

This system has been carefully designed to be as effective as possible. There are circumstances, however, involving fire, burglary, or other types of emergencies where it may not provide protection. Any alarm system of any type may be compromised deliberately or may fail to operate as expected for a variety of reasons. Some but not all of these reasons may be: I Inadequate Installation
A security system must be installed properly in order to provide adequate protection. Every installation should be evaluated by a security professional to ensure that all access points and areas are covered. Locks and latches on windows and doors must be secure and operate as intended. Windows, doors, walls, ceilings and other building materials must be of sufficient strength and construction to provide the level of protection expected. A reevaluation must be done during and after any construction activity. An evaluation by the fire and/or police department is highly recommended if this service is available. I Criminal Knowledge This system contains security features which were known to be effective at the time of manufacture. It is possible for persons with criminal intent to develop techniques which reduce the effectiveness of these features. It is important that a security system be reviewed periodically to ensure that its features remain effective and that it be updated or replaced if it is found that it does not provide the protection expected. I Access by Intruders Intruders may enter through an unprotected access point, circumvent a sensing device, evade detection by moving through an area of insufficient coverage, disconnect a warning device, or interfere with or prevent the proper operation of the system. I Power Failure Control units, intrusion detectors, smoke detectors and many other security devices require an adequate power supply for proper operation. If a device operates from batteries, it is possible for the batteries to fail. Even if the batteries have not failed, they must be charged, in good condition and installed correctly. If a device operates only by AC power, any interruption, however brief, will render that device inoperative while it does not have power. Power interruptions of any length are often accompanied by voltage fluctuations which may damage electronic equipment such as a security system. After a power interruption has occurred, immediately conduct a complete system test to ensure that the system operates as intended. I Failure of Replaceable Batteries This systems wireless transmitters have been designed to provide several years of battery life under normal conditions. The expected battery life is a function of the device environment, usage and type. Ambient conditions such as high humidity, high or low temperatures, or large temperature fluctuations may reduce the expected battery life. While each transmitting device has a low battery monitor which identifies when the batteries need to be replaced, this monitor may fail to operate as expected. Regular testing and maintenance will keep the system in good operating condition. I Compromise of Radio Frequency (Wireless) Devices Signals may not reach the receiver under all circumstances which could include metal objects placed on or near the radio path or deliberate jamming or other inadvertent radio signal interference. I System Users A user may not be able to operate a panic or emergency switch possibly due to permanent or temporary physical disability, inability to reach the device in time, or unfamiliarity with the correct operation. It is important that all system users be trained in the correct operation of the alarm system and that they know how to respond when the system indicates an alarm.

doc1

Section 6: Programming Worksheets Appendix A: Reporting Codes Appendix B: Programming LCD Keypads

PC Wiri ng Di ag ram

S e c tion 1 : Sy s te m Intro d u cti o n

1.1 Specifications

Downloading Software Support PC1555 v2.3 uses DLS-1 v6.7 and up. Flexible Zone Configuration Six fully programmable zones System expandable to 8 zones using keypad zone inputs and to 32 zones using the PC5132 wireless expansion module 38 access codes: one master code, one maintenance code, two duress codes, two supervision codes and 32 general access codes 27 zone types; 8 programmable zone attributes Normally closed, single EOL and double EOL zone wiring 32 wireless zones with the PC5132 Wireless Receiver Audible Alarm Output 700mA Supervised Bell Output (current limited at 3 amps), 12VDC Steady or Pulsed Output EEPROM Memory Does not lose programming or system status on complete AC and Battery failure Programmable Outputs One programmable voltage output and one programmable voltage output/input; 20 programmable options PGM1 = 50mA; PGM2 = 50mA Powerful 1.5 Amp Regulated Power Supply 550 mA Auxiliary Supply, 12 VDC Positive Temperature Coefficient (PTC) components replace fuses Supervision for loss of AC power, low battery Internal clock locked to AC power frequency Power Requirements Transformer = 16.5 VAC, 40VA Battery = 12 volt 4 Ah minimum rechargeable sealed lead acid battery WARNING: Do not install this panel outside of North America. By design, this panel will not work if the AC line frequency drops below 55.5Hz. Remote Keypad Specifications Keypads available: - PC5509 eight zone LED keypad - PC1555RKZ eight zone LED keypad with zone input - PC5508Z eight zone LED keypad with zone input - PC5516Z sixteen zone LED keypad with zone input - PC5532Z thirty-two zone LED keypad with zone input - LCD5500Z Alphanumeric keypad with zone input All keypads have five programmable function keys Connect up to eight keypads 4-wire (Quad) connection to Keybus Built in piezoelectric buzzer Digital Communicator Specifications Supports major communication formats including SIA and Contact ID Event-initiated personal paging Three programmable telephone numbers Two account numbers Supports LINKS1000 cellular communication Supports LINKS2X50 long range radio transmitter Supports Skyroute transceiver DTMF and pulse dialing DPDT line seizure Anti-jam feature Split reporting of selected transmissions to each telephone number System Supervision Features The PC1555 continuously monitors a number of possible trouble conditions including: AC power failure AUX Power Supply Trouble Fault by zone Loss of internal clock Tamper by zone Bell output trouble Fire trouble Telephone line trouble Failure to communicate Low battery condition (panel) Low battery by zone (wireless) Module fault (supervisory or tamper) False Alarm Prevention Features Audible Exit Delay Quick Exit Audible Exit Fault Cross Zone Burglary Alarm Communication Delay Rotating Keypress Buffer Urgency on Entry Delay Additional Features Auto Arm at specified time Keypad-activated alarm output and communicator test All modules connect to the system via a four wire Keybus up to 1000/305m from main panel An event buffer which records the past 128 events with both the time and date at which they occurred; buffer can be printed using PC5400 serial interface module, or viewed with the LCD5500Z keypad and DLS-1 software Communicate via a DVACS communications network with the use of a PC5400 DVACS module Supports the addition of the PC5132 wireless receiver for integration of wireless devices Uploading and downloading capability Local downloading capability through the use of the PC-LINK adaptor Added Keybus fault protection: clock and data outputs have been programmed to withstand shorts to +12v to prevent control panel damage

Additional Devices

In addition to the information below, see the back cover for a DSC module compatibility table. PC5132 Wireless Receiver The PC5132 Wireless Receiver can be used to connect up to 32 wireless devices to the system. All devices are spread spectrum, 900 MHz, fully supervised devices which use standard AAA or AA alkaline batteries. Seven devices are available. They are as follows:
Cabinets Several different cabinets are available for the PC1555 modules. They are as follows:
WLS904 Wireless Motion Detector: Adds wireless space protection to your system
WLS905 Wireless Universal Transmitter: Adds wireless door
or window contacts to your system.
PC5003C Cabinet Main control cabinet for the PC1555 main panel. Dimensions 288mm x 298mm x 78mm / 11.3 x 11.7 x 3 approximately. PC500 Cabinet Main control cabinet for the PC1555 main panel. Dimensions 213mm x 235mm x 78mm / 8.4 x 9.25 x 3 approximately. PC5004C Cabinet Cabinet to house the PC5400 Printer Module. Dimensions 229mm x 178mm x 65mm / 9 x 7 x 2.6 approximately.
WLS906 Wireless Smoke Detector: Adds smoke detection to

your system.

Out of the Box
WLS907 Wireless Slimline Universal Transmitter: A smaller
wireless door or window contact.
WLS908 Wireless Panic Pendant: Adds personal protection to
the system. When used, the unit will indicate a non-medical emergency to the central station.
WLS909 Wireless Key : Adds a simple and mobile method of arming and disarming to the system, as well as one-button access to several programmable functions. WLS910 Wireless Handheld Keypad: A portable keypad which allows arming and disarming from anywhere on the premises.
PC5400 Printer/DVACS Module The PC5400 Printer Module allows the panel to print out all events that occur on the system to any serial printer. The printout will contain the time, date and the event that occurred. The PC5400DVACS module allows the PC1555 control panel to communicate over a DVACS communications network. LINKS1000 Cellular Communicator The LINKS1000 Cellular Communicator can be used three different ways: as the sole communicator for the panel, as a backup for either or both telephone numbers or as a redundant backup to the land line communicator where the panel will call both the land line and via the LINKS. LINKS2X50 Either the LINKS2150 or LINKS2450 may be used to transmit alarm information over a long range radio network. Skyroute Transceiver The Skyroute transceiver offers a new wireless method of communication for the transmission of events using cellemetry service.

NOTE:Telephone numbers can be up to 32 digits. This allows you to add special digits if required. To program the telephone number, enter the numbers 0 through 9 as required. The following is a list of programmable HEX digits and the functions they perform:
HEX (B) - simulates the [*] key on a touch tone telephone HEX (C) - simulates the [#] key on a touch tone telephone HEX (D) - forces the panel to search for dial tone HEX (E) - forces the panel to pause for 2 seconds HEX (F) - marks the end of the telephone number NOTE:The first digit of all telephone numbers must be the HEX digit D for dial tone search, or HEX digit E for a two-second pause. First Telephone Number. Section [301] Second Telephone Number. Section [302] Third Telephone Number. Section [303] Third Telephone Number Enable.Section [380]: [5] Alternate Dial.Section [380]: [6]
Communicator Reporting Codes
The panel can be programmed to report events to the central station by sending the Reporting Code programmed for a particular event.
Reporting codes can be one or two digits and can use HEX digits (A through F). For a complete description of reporting codes which can be programmed and lists of automatic Contact ID and SIA format codes, please see Appendix A: Reporting Codes on page 42. NOTE:Do not use the digit C in a reporting code when using Pager Format. In most cases, the digit C will be interpreted as a [#], which will terminate the page before it has finished. Reporting Codes. Section [320] to [353]
AC Failure Trouble Alarm Code To prevent the panel from transmitting an AC Failure Trouble Alarm reporting code during short power outages, the panel will not send the signal unless AC power is lost for the amount of minutes programmed for the AC Failure Communication Delay. The AC Failure Trouble Restoral reporting code follows the AC failure communication delay as well. NOTE:If AC Failure Communications Delay is programmed as 000, then the AC failure transmission will be immediate. AC Failure Communication Delay. Section [370]
Cross Zone Police Reporting Code The Cross Zone Police Code Alarm will be sent when two different alarms occur during any armed-to-armed period. When an alarm occurs while the panel is armed and a second alarm occurs on a different zone during the same armed period, or after the system is disarmed, this code will be sent. All zone types contribute to this alarm. The cross zone police code will be transmitted immediately unless either or both zones have the Transmission Delay attribute enabled. If so, the code will be delayed for the programmed transmission delay time. Cross Zone Police Code Alarm. Section [328] Zone Restorals If the Restoral on Bell Time-out option is selected, the panel will send the Zone Restoral Reporting Code for the zone if the bell cut-off time has expired and the zone is secured. If the zone is not secured when the bell cut-off time expires, the panel will send the restoral immediately once the zone is secured, or when the system is disarmed. If the Restoral on Bell Time-out option is not selected, the panel will immediately send the Zone Restoral Reporting Code when the zone is secured, regardless of whether or not the alarm output is active. NOTE:24 Hour type zones will report the restoral immediately when the zone is secured. Restoral on Bell Time-out. Section [380]: [2] Closings (Arming Codes) If the Closing Confirmation option is enabled, once the exit delay expires, the keypad will sound a series of eight beeps to confirm to the user that the closing code was sent and received by the central station. Closing Confirmation. Section [381]: [4] Openings/Closings by Wireless Key If you are using a PC5132 v3.0 or higher, wireless keys with access codes may be identified when they are used to arm or disarm the system: the panel will log and transmit opening or closing by access code (the same as if an access code had been used to arm/disarm the system). If wireless keys with no access code are used, the event will be logged and transmitted as opening or closing by keyswitch. The Function Keys Require Code option must be selected (section [015], option 4 OFF) in order for wireless keys to be identified for arming. Disarming will always be logged by access code, if one is programmed for the Key, regardless of this option.

Wireless Maintenance The panel will transmit a Wireless Device Low Battery Alarm reporting code if a low battery condition is indicated by a detector. The transmission of the trouble will be delayed by the number of days programmed for Zone Low Battery Transmission Delay. The Wireless Device Low Battery Restoral reporting code will be transmitted when the problem is corrected. The specific zone that caused the trouble will be recorded in the event buffer. NOTE: The restoral will not be transmitted until all detectors indicate good battery conditions. Wireless Maintenance Reporting Codes. Section [353] Wireless Device Battery Transmission Delay. Section [370] Arming and Activity Delinquency When Delinquency Follows Arming (Days) is selected, the Delinquency reporting code is sent whenever the panel is not armed within the number of days programmed for the Delinquency Transmission Cycle. NOTE: If the Delinquency Transmission Cycle is set for one day, there must be 24 hours of no arming or disarming before the Delinquency Code will be sent. After a Delinquency Code has been transmitted, it will not be sent again until the system has been armed and disarmed. When Delinquency Follows Zone Activity (hours) is enabled, if there is no activity on zones in the system, the Delinquency Transmission Cycle Timer in Section [370] will begin counting in hours. When the counter reaches the programmed time, the panel will communicate the Delinquency reporting code to the central station, if programmed. If there is a closing or zone activity present on the system at any time, the counter will be reset. NOTE:Activity Delinquency will not be reported while the panel is armed in Away mode.
NOTE:Activity on manually bypassed zones will not reset the timer. NOTE:This timer is reset when the panel is armed, or if Installer Programming is entered. NOTE:When using the SIA FSK communication format with Activity Delinquency, the Closing Delinquency identifier is transmitted.
Miscellaneous Maintenance Reporting Codes. Section [351] Delinquency Follows Zone Activity.[380]: [8] Delinquency Transmission Cycle. [370]

C o m m un ic a t or

R e p o rt i ng

F or m a t s

Communicator Reporting Formats
Each communication telephone number can be programmed to report using any one of eight formats available. Two 20 BPS pulse formats are supported, in addition to Contact ID, SIA and Pager formats. The Communicator Call Direction options can be used to disable the reporting of events such as Openings and Closings. NOTE: Do not program the 2nd telephone number to use Contact ID or SIA reporting code formats (section [360]) if Automatic reporting codes are selected for either Contact ID or SIA (section [381]). Communicator Format Options. Section [360] Communicator Call Directions. Section [361] to [368] The following is a description of each reporting format: Pulse Formats Depending on which pulse format is selected, the panel will communicate using the following specifications: 3/1, 3/2, 4/1 or 4/or 2300 Hz handshake 20 bits per second non-extended Additional Notes on Pulse Formats 1. The digit 0 will send no pulses and is used as a filler digit. 2. When programming account numbers, enter four digits. When programming a three digit account number, the fourth digit must be programmed as 0. 3 digit account number [123] - program [1230] 3. If an account number has a 0 in it, substitute a HEX digit A for the 0. For example: 3 digit account number [502] - program [5A20] 4 digit account number [4079] - program [4A79] 4. Reporting codes are two digits. When programming single-digit Reporting Codes, the second digit must be programmed as a 0. If a 0 is to be transmitted, substitute HEX digit A. For example: 1 digit Reporting Code [3] - program [30] 2 digit Reporting Code [30] - program [3A] 5. To prevent the panel from reporting an event, the reporting code should be programmed as [00] or [FF]. Contact ID Contact ID is a specialized format that will communicate information using tones rather than pulses. This format allows more information to be sent faster than other formats. For example, in addition to reporting an alarm in zone one, the Contact ID format will also report the type of alarm, such as an Entry/Exit alarm. If the Contact ID uses Programmed Reporting Codes option is enabled, a two digit number from Appendix A must be entered in programming sections [320] to [353] for each event to be transmitted. The two digit number determines the type of alarm. The panel will automatically generate all other information, including the zone number. If the Contact ID uses Automatic Reporting Codes option is enabled, the panel will operate as follows: 1. If an events reporting code is programmed as [00], the panel will not attempt to call the central station. 2. If the reporting code for an event is programmed as anything from [01] to [FF], the panel will automatically gener-

Hex [C] - simulates the [#] key on a touch tone telephone Hex [D] - forces the panel to search for dial tone Hex [E] - two second pause Hex [F] - marks the end of the telephone number The panel will attempt to call the pager once. Once the appropriate telephone number is dialed, the panel will send the account number and Reporting Code followed by the [#] key (Hex [C]). The panel has no way of confirming if the pager was called successfully. A Failure To Communicate trouble will only be generated if the panel detects a busy tone on all dialing attempts, or if no dial tone is detected on all dialing attempts. The pager format will not cause any form of ringback. NOTE:The Pager Format cannot be used with the LINKS1000 cellular communicator.
computer file should contain the same information programmed before attempting to download. The time to complete a successful download can be significantly reduced with the use of the PC-LINK. This adaptor makes it possible to perform on-site downloading. To Initiate Local Downloading via the PC-LINK, enter [*][8][Installers Code][499][Installers Code][499]. All keypads will be busy for the duration of the PC-LINK connection. The status LEDs will display the current system status on the keypad where the PC-LINK was initiated. For more information on connecting the PC-LINK, refer to your PC-LINK Download Kit Instruction Sheet. NOTE: When a zone status upload is performed through PCLINK, the information uploaded may not be accurate. For more information, refer to your DLS-1 manual. Downloading can also be performed through the LINKS1000 cellular communicator if the telephone line is disconnected. If using the LINKS1000 with call back, you need to program the LINKS1000 Preamble with the downloading telephone number in order for the panel to call the computer correctly. NOTE:When uploading labels from LCD keypads, only labels from the LCD keypad assigned to slot 8 will be uploaded. Answering Machine/Double Call. Section [401]: [1] User Enable DLS Window. Section [401]: [2] Call-Back. Section [401]: [3] User-initiated Call-up enabled/disabled. Section [401]: [4] Downloading Computers Telephone Number. Section [402] Downloading Access Code. Section [403] Panel Identification Code. Section [404] Answering Machine Double Call Timer. Section [405] Number of Rings to Answer On. Section [406] LINKS1000 Preamble (Downloading). Section [490] Initiate Local Downloading (PC-LINK). Section [499]
NOTE:Do not use the digit C in a reporting code when using Pager Format. In most cases, the digit C will be interpreted as a [#], which will terminate the page before it has finished. NOTE:If the panel detects a busy signal, it will attempt to page again. It will make the maximum number of attempts programmed in section [160]. NOTE:Force dialing should be disabled when using Pager format. NOTE:When using Pager format, you must program two hex digit Es at the end of the telephone number

5.13 Bell

The bell will silence after the number of minutes programmed for the Bell Cut-off time have passed. The panel supervises the Bell output. If an open condition is detected, the panel will immediately indicate a trouble condition by beeping the keypad twice every 10 seconds to alert the owner of the problem. The panel can send a Bell Circuit Trouble and Trouble Restoral reporting codes to indicate the situation (See 5.8 Communicator Reporting Codes on page 17.) If the Temporal Three Fire Signal option is enabled, all Fire signals (on zone types [07], [08], [87], [88]) will follow the Temporal Three Pattern as described in NFPA 72. If turned

T e s t

T r a n sm i ss io n
OFF all Fire signals will sound a one second on, one second off cadence. If Fire Bell Continuous is enabled, the alarm output will sound until a code is entered. If disabled, the alarm will sound until a code is entered or the bell cut-off time has expired. Bell Cut-off. Section [005] Bell Circuit Trouble Reporting Code. Section [349] Bell Circuit Trouble Restoral Reporting Code. Section [350] Temporal Three Fire Signal Enable/Disable Section [013]: [8] Fire Bell Continuous. Section [014]: [8]
vation. The panel will beep the keypad ten times rapidly when a kissoff is received, to verify communication to the central station. If the [P] / Key is pressed and held for two seconds, the panel will immediately communicate the signal to central station. If [P] Key Audible Bell and Buzzer option is enabled, when a user presses the [P] / key, the keypad will beep three times and the panel will activate the alarm output until an access code is entered or the bell cut-off expires. If the option is disabled, the Panic alarm will be completely silent. Each LCD keypad may be programmed to have the [F], [A], & [P] keys enabled or disabled. Please refer to Appendix B: Programming LCD Keypads on page 44. NOTE:The Fire, Auxiliary, Panic keys will operate even if Keypad Blanking is active (See 5.22 Keypad Blanking on page 25.) [F] Key Enable.Section [015]: [1] [P] Key Audible Bell and Buzzer.Section [015]: [2]

5.14 Test Transmission

To ensure that the communication link with the central station is functioning properly, program the panel to send a test transmission signal on a regular basis. The panel can send a Periodic Test Transmission Reporting Code at the programmed Test Transmission Time of Day. The Test Transmission Cycle determines the period of time between tests. NOTE:The LINKS Test Transmission can only be programmed in days. If you program the test transmission cycle for a longer period of time than it was programmed for previously, the system will wait the original time period before the next test transmission is sent, and then begin reporting with the new interval. The panel can also send a test for the LINKS1000 Cellular Communicator, if used. If the LINKS1000 Test Transmission Code is programmed, the panel will send a cellular test at the interval programmed in the LINKS Test Transmission Cycle. Users can also generate a communicator test. If the System Test Reporting Code is programmed, the panel will send the signal when the System Test keypad command is entered. (See [*][6] User Functions on page 10.) Test Transmission Reporting Codes. Section [352] Test Transmission Time of Day. Section [371] Test Transmission Cycles. Section [370]

5.19 Swinger Shutdown

The swinger shutdown feature is designed to prevent a runaway communicator from tying up the central station. After the panel has communicated the programmed number of transmissions for an event, it will no longer report that event until the swinger shutdown is reset. Different swinger shutdown levels can be set for zone alarms, zone tampers and maintenance signals. By default, each Swinger Shutdown limit is set to [003]. The panel will not send more than three signals for each zone until the swinger shutdown is reset. The Bell output will not be activated for alarms on zones that have exceeded the limit of alarms set in the Swinger Shutdown counter. Swinger shutdown will be reset every day at midnight or when the panel is armed. Once reset, the panel will again communicate normally. Swinger Shutdown. Section [370]
5.18 Entry/Exit Delay Options
Two different Entry Delays can be programmed: the first entry delay will be enabled for Delay 1 type zones and the second for Delay 2 type zones. Only one Exit Delay can be programmed. NOTE:When the panel is armed, the entry delay will follow the entry delay time programmed for the delay zone which is violated first. Users can restart the exit delay by pressing the Away key while it is counting down. The system will not log the user who re-started the exit delay, unless the Quick Arming Disabled/ Function Keys Require Code option is turned on (section [015], option [4]). NOTE: If the system has been Stay armed or armed with no entry delay ([*][9]) pressing the Away key will not start an exit delay. Upon arming, the panel will begin the exit delay. If the Audible Exit Delay with Urgency option is enabled, the keypad will beep at one second intervals until the exit delay expires. The keypad will beep rapidly for the last 10 seconds of exit delay to warn the user that the system is about to arm. If this option is disabled, the keypad will not beep during the exit delay. The Audible Exit Fault, as explained in Section 3.1, will notify the user if they failed to secure the premises upon arming. This option can be enabled or disabled according to the users needs. For commercial applications, the Bell Squawk on Exit Delay option may be enabled. The panel will squawk the alarm output once every second when the exit delay is initiated and three times per second for the last 10 seconds until the exit delay expires. Upon entry, if a Delay type zone is violated, the panel will begin the entry delay. The keypad will emit a steady tone. The keypad will pulse the keypad sounder during the last 10 seconds to warn the user the system is about to go into alarm. If there was an alarm during the armed period, the keypad will pulse for the entire entry delay to warn the user of the previous alarm. For commercial applications Bell Squawk on Entry Delay may be enabled. The panel will squawk the alarm output once

To perform a walk test: Step 1 - Enter Installer Programming Step 2 - Enter Section [901] When any zone is violated the panel will activate the Bell Output for two seconds, log the event to the event buffer and communicate the alarm to central station. Test each zone several times. Check the event buffer to ensure that all zones and FAP keys are functioning properly. NOTE: Zones with the Force Arm attribute enabled, will not cause the Ready light to go out when they are violated. To stop the test: Step 1 - Enter Installer Programming Step 2 - Enter section [901] Check the event buffer after the walk test is complete, to ensure that the Audible/Silent 24-hr PGM alarms have been restored. NOTE:The alarm memory is cleared upon entering Walk Test mode. When the walk test is complete, the Alarm Memory light will remain lit, but there will be no alarms in memory. The light will turn off the next time the panel is armed.
Installer Walk Test Enable/Disable. Section [901]
S e ction 6 : Pro g rammi ng Work s he et s

For the Record

Customer: _______________________________________________________________________________________________________ Address: ________________________________________________________________________________________________________ Telephone: ___________________________________________ Installation Date: ___________________________________________ Installers Code: __________________________________________________________________________________________________
Module Name PC1555 PC5132 PC5400 PC5400 LINKS1000 LINKS2X50 Skyroute
Description Main Panel Wireless Receiver Serial Printer Module DVACS Module Cellular Communicator Long Range Radio Transceiver

Location

I________________________________________________________________________________________________________________I
Keypads Keypad 1 Keypad 2 Keypad 3 Keypad 4 Keypad 5 Keypad 6 Keypad 7 Keypad 8

Keypad Type

I_____________________________________________I

Zone Programming Summary

Zone programming can be found in sections [001] - [004], [101] - [132], [020] and [202] - [205]. Use this area to record a summary of your zone programming. Refer to Appendix B: Programming LCD Keypads on page 44, for instructions on programming zone labels. System Zone Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 Zone 9 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16 Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24 Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32 Zone Label

NOTE:Keypads must be installed to use 24-hour Buzzer zones. NOTE:Keypad zones are assigned in section [020]. Zone Attributes are assigned in sections [101] - [132]. Zone assignment is in sections [202] - [205].
[001] Zone 1-8 Definitions (Section 5.2 Zone Programming on page 15) Default Default 01 I_______I_______I Zone I_______I_______I Zone 03 03
I_______I_______I I_______I_______I I_______I_______I

Zone 2 Zone 3 Zone 4

Zone 6 Zone 7 Zone 8
NOTE:Zones 9-32 are only available for wireless zones.
[002] Zone 9-16 Definitions (Section 5.2 Zone Programming on page 15) Default Default 00 I_______I_______I Zone I_______I_______I Zone 00 00

Zone 10 Zone 11 Zone 12

Zone 14 Zone 15 Zone 16
[003] Zone 17-24 Definitions (Section 5.2 Zone Programming on page 15) Default Default 00 I_______I_______I Zone I_______I_______I Zone 00 00

Zone 18 Zone 19 Zone 20

Zone 22 Zone 23 Zone 24
[004] Zone 25-32 Definitions (Section 5.2 Zone Programming on page 15) Default Default 00 I_______I_______I Zone I_______I_______I Zone 00 00

Zone 26 Zone 27 Zone28

Zone 30 Zone 31 Zone 32
[005] System Times Default Valid entries: [001-255] I_______I_______I_______I Entry Delay 1 (in seconds)(Section 5.18 Entry/Exit Delay Options on page 24) 120 004
I_______I_______I_______I I_______I_______I_______I I_______I_______I_______I
Entry Delay 2 (in seconds)(Section 5.18 Entry/Exit Delay Options on page 24) Exit Delay (in seconds)(Section 5.18 Entry/Exit Delay Options on page 24) Bell Cut-off (in minutes)(Section 5.13 Bell on page 22)
[006] Installers Code (Section 4.1 Installers Programming on page 13) Default 5555 I_______I_______I_______I_______I [007] Master Code (Section 5.1 Programming Security Codes on page 15) Default 1234 I_______I_______I_______I_______I [008] Maintenance Code (Section 5.1 Programming Security Codes on page 15) Default AAAA I_______I_______I_______I_______I [009] PGM Output Programming (PGM 1 and 2) (Section 5.11 PGM Output Options on page 20) Programmable Output Options 01 Burglary and Fire Bell Output 14 Ground Start Pulse 02 For future use 15 Remote Operation (DLS-1 Support) 03 Sensor Reset 16 LINKS1000 Support (PGM1 only) 04 For future use 17 Away Armed Status 05 System Armed Status 18 Stay Armed Status 06 Ready To Arm 19 Command Output #1 ([*][7][1]) 07 Keypad Buzzer Follow Mode 20 Command Output #2 ([*][7][2]) 08 Courtesy Pulse 21 For future use 09 System Trouble Output (with Trouble options) 22 For future use 10 System Event [Strobe (with Event options)] 23 Silent 24 Hour (PGM2 Only) 11 System Tamper (all sources: zones, kpd, modules) 24 Audible 24 Hour (PGM2 Only) 12 TLM and Alarm 13 Kissoff Output NOTE:Output types [03] and [20] cannot be used together on the same system. Default

True Output Inverted

Follows Timer On / Off

Code Req. No Code Req.

Attribute: PGM Option
ON OFF [09] System Trouble ON OFF [10] System Event
Serv. req. Disabled Y Burg. Evnt. Disabled Y
AC Fail Disabled Y Fire Evnt. Disabled Y
TLM Fault Disabled Y Panic Evnt. Disabled Y
FTC Disabled Y Med. Evnt. Disabled Y
Zone Fault Disabled Y Supv. Evnt. Disabled Y
Zone Tmp. Disabled Y Priority Evnt. Disabled Y
Zn. Low Bat. Disabled Y Holdup Evnt. Disabled Y
Loss of Clock Disabled Y Follows Timer* Latched N
*If attribute [8] is turned ON, attributes [1-7] must also be turned ON.
Section PGM # [141] 1 [142] 2

Output Type* ( ) ( )

I________| I________|
*Record here based on programming in [009].
[160] Maximum Dialing Attempts to Each Telephone Number (Section 5.5 Communicator Dialing on page 17) Default: 008 I_______I_______I_______I Valid entries are 001-015 attempts (do not enter 000). [161] Post Dial Wait for Handshake (All Formats) (Section 5.5 Communicator Dialing on page 17) Default: 040 I_______I_______I_______I Valid entries are 001-255 seconds [164] PGM Output Timer (Section 5.5 Communicator Dialing on page 17) Default: 005 I_______I_______I_______I Valid entries are 001-255 seconds [202] Zone Assignments 01-08 (Section 5.2 Zone Programming on page 15) Program zone definitions in sections [001] - [004] and zone attributes in sections [101] - [132]. Program keypad zone assignments in section [020].
NOTE:Any zones not used on the system should be disabled in this section. Disabled wireless zones should have a blank serial number (i.e. [000000]).
Zones 1-8: Default = ON; Zones 9-32: Default = OFF Section Option: 3 [202] Zone 1 Zone 2 Zone 3
I______________I I______________I I______________I

4 Zone 4

I______________I

5 Zone 5

6 Zone 6

7 Zone 7

8 Zone 8

[203] [204] [205]

Zone 9

Zone 10

Zone 11

Zone 12

Zone 13

Zone 14

Zone 15

Zone 16

Zone 17

Zone 18

Zone 19

Zone 20

Zone 21

Zone 22

Zone 23

Zone 24

Zone 25

Zone 26

Zone 27

Zone 28

Zone 29

Zone 30

Zone 31

Zone 32

Communicator Programming
NOTE: For sections [301] to [353], the content of every section by default is [F].
[301] First Telephone Number (32 Digits) (Section 5.7 Communicator Telephone Numbers on page 17)
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I

2. Telephone Number 2 FTC Restore 3. Event Buffer 75% Full Since Last Upload 4. DLS Lead IN
6. Zone Fault Alarm 7. Zone Fault Restore 8. Delinquency Code
[352] Test Transmission Reporting Codes (Section 5.8 Communicator Reporting Codes on pg. 17, & Appendix A) I_______I_______I 1. Periodic Test Transmission I_______I_______I 3. LINKS1000 Test Transmission Code*
2. System Test *The LINKS Test Transmission Code must be programmed as 00 for the LINKS Test Transmission to be disabled. 37
[353] Wireless Maintenance Reporting Codes (Section 5.8 Communicator Reporting Codes on pg. 17, & Appendix A) I_______I_______I 1. Wireless Device Low Battery Alarm I_______I_______I 2. Wireless Device Low Battery Restore [360] Communicator Format Options (Section 5.9 Communicator Reporting Formats on page 19) NOTE:The Third telephone number follows the format of the First telephone number. Default 02 02
1st/3rd Telephone Number 2nd Telephone Number 04 SIA FSK 05 Pager
BPS, 1400 HZ handshake BPS, 2300 HZ handshake 03 DTMF CONTACT ID
[361] Alarm/Restore Communicator Call Directions (Section 5.5 Communicator Dialing on page 17) Default Option ON OFF ON I_______I 1 1st Telephone Number Disabled OFF OFF OFF OFF
I_______I I_______I I_______I I_______I
2nd Telephone Number 1st Telephone Number (via LINKS) 2nd Telephone Number (via LINKS) For future use
Disabled Disabled Disabled
[363] Tamper/Restore Communicator Call Directions (Section 5.5 Communicator Dialing on page 17) Default Option ON OFF ON I________I 1 1st Telephone Number Disabled OFF OFF OFF OFF
I________I I________I I________I I________I
[365] Opening/Closing Communicator Call Directions (Section 5.5 Communicator Dialing on page 17) Default Option ON OFF I________I 1 1st Telephone Number Disabled ON OFF OFF OFF OFF
[367] System Maintenance Alarm/Restore Communicator Call Directions (Section 5.5 Communicator Dialing on page 17) Default Option ON OFF ON I________I 1 1st Telephone Number Disabled OFF OFF OFF OFF
[368] System Test Transmissions Communicator Call Directions (Section 5.5 Communicator Dialing on page 17) Default Option ON OFF I________I 1 1st Telephone Number Disabled ON OFF OFF OFF
I________I I________I I________I
2nd Telephone Number 1st Telephone Number (via LINKS) 2nd Telephone Number (via LINKS)
OFF I________I 5-8 For future use NOTE:The LINKS1000 backup call directions will only back up their respective telephone numbers.

Code Sent When. AC power to control panel is disconnected or interrupted/AC power restored (Both codes follow AC Failure Comm. Delay.) open circuit detected across bell terminals/bell circuit closed a trouble occurs/restores on a fire zone aux voltage supply trouble/restoral

Dialer Direction* MA/R

Contact ID Codes (3) A1
SIA Auto Rep Codes** AT-00/AR-00
[349-350] [349-350] [349-350] [349] [350] [349-350] [351] [351] [351] [351] [351] [351]
Main Bell Trouble/Rest. Fire Trouble/Rest. Auxiliary Power Trouble/ Rest. TLM Failure
MA/R MA/R MA/R MA/R MA/R MA/R MA/R MA/R MA/R MA/R MA/R MA/R
(3) 21 (3) 73 (3) AA (3) 51 (3) 51 (3) 33 (3) 54 (6) 23 (4) 11 (4) 12 (3) 72 (4) 54***
UT-99/UJ-99 FT-00/FJ-00 YP-00/YQ-00 LT-00 LR-00 ET-00/ER-00 YK-00 JL-00 RB-00 RS-00 UT-00/UJ-00 CD-00

[352] [352] [352] [353]

telephone line monitoring trouble (sent via LINKS. Do not program if LINKS not used) TLM Restore Telephone line trouble restore Gen System Supervisory control panel loses/restores communications with modTrouble/Rest. ule(s) connected to the Keybus Line 1 or 2 FTC Restoral control panel has restored communications to central station on line 1 or 2 (after FTC) Event Buffer is 75% Full event buffer is almost full since last upload DLS Lead In downloading session start DLS Lead Out downloading session complete Zone Fault/Rest. one or more zones have faults/restored Delinquency programmed amount of time (days or hours) for delinquency has expired without zone activity or without system being armed Periodic Test periodic system test transmission System Test [*][6] bell/communications test LINKS Test LINKS test transmission Wireless Device Low Battery wireless zones (WLS904, WLS905, WLS907); panic pendants (WLS908); handheld keypads (WLS910); Trouble/Rest. wireless keys (WLS909) have low battery/all low batteries restored

T T T MA/R

(6) A2 (6) A1 (6) A3 (3) 84
RP-00 RX-00 TX-00 XT-00/XR-00
* A/R = alarms/restorals; T/R = tampers/restorals; O/C = openings/closings; MA/R = miscellaneous alarms/restorals; T = test transmissions ** UU = user number (user01-42); ZZ = zone number (01-08) ***Program the Fail to close event code [(4)54] to report either closing or activity delinquency. Make sure your central station is aware of the application of this reporting code.

[99] Reset LCD EEPROM to Factory Defaults ASCII Characters

NOTES:

F C C C O M P LI A N C E S TAT E M E NT
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. The user may find the following booklet prepared by the FCC useful: How to Identify and Resolve Radio/Television Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4. IMPORTANT INFORMATION This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a label that contains, among other information, the FCC registration number of this equipment. Notification to Telephone Company The customer shall notify the telephone company of the particular line to which the connection will be made, and provide the FCC registration number and the ringer equivalence of the protective circuit. FCC Registration Number: F53CAN-32028-AL-E Facility Interface Code: 02LS2 Ringer Equivalence Number: 0.1B Service Order Code: 9.0F USOC Jack: RJ31X Telephone Connection Requirements Except for the telephone company provided ringers, all connections to the telephone network shall be made through standard plugs and telephone company provided jacks, or equivalent, in such a manner as to allow for easy, immediate disconnection of the

 

Tags

MC150 ICD-MX20 CT-513W DI152 Stylus C62 FAX-1560 Schuko XVM-R70 Psr-400 Actyon 44SZ8R KDL-20S3000 TX-28PS1 SGH-B130T BMP7407 Lexmark T640 Mounts WEP180 SCF280 DA6352 F-15-F-5 HR8TE 17-inch CRT Friends W580I Dsac-MVC PT-P1SDU DMC-F7 Hasbro Clue Front WF7604SUV Md 4895 Jetdirect 175X CD4454Q Triton 400 FE-700 M8000 Nokia 2300 All-IN-ONE KDC-MP232 CD6551B WF210ANW XAA L1950H-SN GTO1201 1 Music 1 R-805TX SGH-E215L SPV C600 0 Plus Amarys 1400 HCD-S300 Clutch Portable SBX-80 CFM745M Asus P3W XD-951 Deskjet 6800 HB791 MHC-RG270 Aficio 615C T1031 LSJ092V-3 Indianapolis 7925 Cyber Shot Nuvi 260 KX-F500 Latigo MDR-V150 Of Life DG60-112 Urc-2560 Palmtop PC NV-HD640B Workstations Mp4 FAX-LAB 460 S1255 Xantia HT-P1200 Tikka XP Titan-2007 SR-S20DTC Perfection 1270 PM-16 Aladin PRO 2 4 SNB6500 00 Mamiya ZD Motorola I265 Suite 10 10940 Trainer 2005 DC146 Escape-2005 EFW 6305 PD726W EW1010F Frontline Satellite A500 RB-1080

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101