Honeywell TH6220D Manual
Honeywell TH6220D, size: 879 KB
Here you can find all about Honeywell TH6220D like installation manual and other informations. For example: thermostat installation, thermostat.
Honeywell TH6220D manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Honeywell TH6220D please write about it to help other people. [ Report abuse or wrong photo | Share your Honeywell TH6220D photo ]
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
FocusPRO TH6110D/TH6220D Programmable Thermostat
Quick Reference Card
Grasp and pull to see basic operating instructions at a glance.
Press down and pull to remove batteries. Batteries should be replaced once a year (see page 17).
Table of contents
About your new thermostat Thermostat features.2 Programming at a glance.3 Quick reference to controls.4 Quick reference to display.5 Programming & Operation Set time and day..6 Select fan setting (auto/on).7 Select system setting (heat/cool).8 Using program schedules.9 Program schedule overrides.12 Auto-changeover (heat/cool).14 Compressor protection.15 Adaptive Intelligent Recovery.16
Appendices Battery installation.17 In case of difficulty..18 Customer assistance..20 Accessories/replacement parts.20 Limited warranty.21
This thermostat is ready to go! Your new thermostat is preprogrammed and ready to go. See page 3 to check settings.
CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50F (10C).
For assistance with this product please visit www.honeywell.com/yourhome or call Honeywell Customer Care toll-free at 1-800-468-1502
Read and save these instructions
U.S. Registered Trademark. Patents pending. Copyright 2005 Honeywell International Inc. All rights reserved.
About your new thermostat
Congratulations on the purchase of your new Honeywell thermostat. It has been designed to give you many years of reliable service and easy-to-use, push-button climate control.
This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go.All you have to do is set the time and day.Then check the settings below and change if needed: Set time and day (required for proper operation)..See page 6 Select fan setting (Auto/On): Preset to Auto..To change, see page 7 Select system setting (Heat/Cool): Preset to Heat.To change, see page 8 Program schedules: Preset to energy-saving levels while youre at work or asleep (assumes you wake at 6 am, leave at 8 am, return at 6 pm and go to bed at 10 pm)...To change, see pages 9-11
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and manually adjust the temperature (see pages 12-13).
Separately programmable weekday/weekend schedules. One-touch temp control overrides program schedule at any time. EnergyStar compliant to greatly reduce your heating/cooling expenses. Large, clear, backlit display is easy to read even in the dark. Displays both room temperature and temperature setting. Removable battery holder for fast, easy replacement. Built-in compressor protection.
Quick reference to controls
Digital display (see page 5) Battery holder (see page 17)
Quick reference to display screen
Current inside temperature In Recovery (see page 16) Low battery warning (see page 17)
Current time/day (see page 6)
Temperature buttons Press to adjust temperature settings (see page 11-13)
Current program period Wake/Leave/Return/Sleep (see pages 9-11) Set Clock/Day/Schedule (see pages 6 & 11)
Temperature setting (see pages 11-13) Auxiliary heat (Only for heat pumps with auxiliary heat) System status Heat On/Cool On (If flashing, see page 15) System setting Heat/Cool/Auto/Off/Em Heat (see page 8) Fan setting Auto/On (see page 7)
Wed Fan Auto
Auxiliary Heat On
Set Clock/Day/ Schedule
Hold button Press to override programmed temperature control (see page 13) Function buttons Press to select the function displayed just above each button. (Functions change depending on the task.) 4
Function buttons Press the button beneath each function to view or change settings (functions change depending on the task) 5
Set the time and day
SET CLOCK /DAY /SCHEDULE,
Select the fan setting
1 Press the SET CLOCK/DAY/SCHEDULE button, then press or to set the clock time. 2 Press the SET DAY button, then press or to select the day of the week. 3 Press DONE to save & exit.
Note: If the SET CLOCK /DAY /SCHEDULE option is not displayed, press DONE or RUN SCHEDULE. Note: If the display flashes Set Clock, the thermostat will follow your settings for the weekday Wake time period until you reset the time and day. 6 7
Set Clock/Day/ Schedule Fan Auto System Heat
then adjust time
button to select Auto or On.
Set Clock/Day/ Schedule Fan Auto
PM System Heat
Fan Set Clock/Day/ Schedule On
In Auto mode (the most commonly used setting), the fan runs only when the heating or cooling system is on. If set to On, the fan runs continuously. Use this setting for improved air circulation, or for more efficient air cleaning.
then select current day
Done Set Day Set Schedule
Select the system setting
Save money by setting program schedules
button to select:
Note: The Auto and Em Heat system settings may not appear, depending on how your thermostat was installed.
Heat: Thermostat controls only the heating system. Cool: Thermostat controls only the cooling system. Off: Heating and cooling systems are off. Auto: Thermostat automatically selects heating or cooling depending on the indoor temperature. Em Heat (only for heat pumps with auxiliary heat):Thermostat controls Emergency and Auxiliary Heat. Compressor is locked out.
Its easy to program your system for maximum energy savings.You can program four time periods each day, with different settings for weekdays and weekends.
Set to the time you awaken and the temperature you want during the morning, until you leave for the day. Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
RETURN Set to the time you return home and the temperature you
want during the evening, until bedtime. Set to the time you go to bed and the temperature you want overnight (usually an energy-saving level).
EnergyStar settings for maximum cost savings
This thermostat is pre-set to use EnergyStar program settings.We recommend these settings, since they can reduce your heating/cooling expenses by as much as 33%. (See next page to adjust times and temperatures of each time period.)
To adjust program schedules
Set Clock/Day/ Schedule Fan Auto System Cool
Heat (Mon-Fri) Wake
[Or cancel period]
1 Press SET CLOCK/DAY/SCHEDULE, then SET SCHEDULE. 2 Press or to set your weekday Wake time (Mon-Fri), then press NEXT. 3 Press or to set the temperature for this time period, then press NEXT. 4 Set time and temperature for the next time period (Leave). Repeat steps 2 and 3 for each weekday time period. 5 Press NEXT to set weekend time periods (Sat-Sun), then press DONE to save & exit.
Note: Make sure the thermostat is set to the system you want to program (Heat or Cool). Note: You can press CANCEL PERIOD to eliminate unwanted time periods (except Wake). 11
Mon Tue Wed Thu Fri
Program schedule override (temporary)
Press to temporarily adjust temperature
Program schedule override (permanent)
Press to permanently adjust temperature
Inside Heat Setting
Temporary Heat Setting
Press or to immediately adjust the temperature.This will temporarily override the temperature setting for the current time period. The new temperature will be maintained only until the next programmed time period begins (see page 10). For example, if you want to turn up the heat early in the morning, it will automatically be lowered later, when you leave for the day. To cancel the temporary setting at any time, press RUN SCHEDULE.
Press HOLD to permanently adjust the temperature.This will override the temperature settings for all time periods. The Hold feature turns off the program schedule and allows you to adjust the thermostat manually, as needed. Whatever temperature you set will be maintained 24 hours a day, until you manually change it, or press RUN SCHEDULE to cancel Hold and resume the programmed schedule.
Press to cancel temporary setting and resume program schedule Note: Make sure the thermostat is set to the system you want to control (heat, cool or auto).
Press to cancel Hold setting and resume program schedule Note: Make sure the thermostat is set to the system you want to control (heat, cool or auto).
Auto Changeover (heat/cool)
Set Clock/Day/ Schedule Fan Auto System Auto
Built-in compressor protection
Auto Changeover is a feature used in climates where both air conditioning and heating are used on the same day.When the system is set to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 3 degrees apart.The thermostat will automatically adjust settings to maintain this 3-degree separation (called deadband). The 3-degree separation between heating and cooling set temperatures is fixed, and cannot be changed.
This feature helps prevent damage to the compressor in your air conditioning or heat pump system. Damage can occur if the compressor is restarted too soon after shutdown.This feature forces the compressor to wait for a few minutes before restarting. During the wait time, the display will flash the message Cool On (or Heat On if you have a heat pump).When the safe wait time has elapsed, the message stops flashing and the compressor turns on.
Press until screen displays Auto
Cool On System Cool
Message flashes until safe restart time has elapsed
Note: The Auto system setting may not appear, depending on how your thermostat was installed.
Adaptive Intelligent Recovery (AIR)
Adaptive Intelligent Recovery eliminates guesswork when setting your schedule. It allows the thermostat to learn how long your furnace and air conditioner take to reach the temperature you want. Just set your program schedule to the time you want the house to reach your desired temperature.The thermostat then turns on the heating or cooling at just the right time to reach your scheduled temperature at your scheduled time. For example: Set the Wake time to 6 am, and the temperature to 70.The heat will come on before 6 am, so the temperature is 70 by the time you wake at 6.
Note: When Adaptive Intelligent Recovery is in effect, the thermostat will display In Recovery.
Press and pull to remove
Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. Install fresh batteries immediately when the REPLACE BATTERY warning begins flashing.The warning flashes about two months before the batteries are depleted. Even if the warning does not appear, you should replace batteries once a year, or before leaving home for more than a month. If batteries are inserted within two minutes, the time and day will not have to be reset.All other settings are permanently stored in memory, and do not require battery power.
Insert fresh AA alkaline batteries, then reinstall battery holder
In case of difficulty
If you have difficulty with your thermostat, please try the suggestions below. Most problems can be corrected quickly and easily.
Display is blank Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. If thermostat is battery powered, make sure fresh AA alkaline batteries are correctly installed (see page 17).
Heating or Press SYSTEM button to set system to Heat. Make sure the temperature cooling system is set higher than the Inside temperature. does not respond Press SYSTEM button to set system to Cool. Make sure the temperature is set lower than the Inside temperature. Cool On or Heat On is flashing Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. Wait 5 minutes for the system to respond. Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor (see page 15).
Temperature settings do not change To restore Energy Star default settings
Make sure heating and cooling temperatures are set to acceptable ranges: Heat: 40 to 90F (4.5 to 32C). Cool: 50 to 99F (10 to 37C). Follow these steps to restore Energy Star default settings (see page 10): 1 Press SET CLOCK /DAY /SCHEDULE. 2 Press SET SCHEDULE. 3 Press DONE and NEXT at the same time for 4 seconds. 18
For assistance with this product, please visit www.honeywell.com/yourhome. Or call Honeywell Customer Care toll-free at 1-800-468-1502.
Limited 5-year warranty
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of five (5) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option). If the product is defective, (i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or (ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the product should be returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can be sent to you.
To save time, please remove the battery holder and note your model number and date code before calling.
To order, please call Honeywell Customer Care toll-free at 1-800-468-1502.
Battery holder..Part No. 50007072-001 Cover plate assembly.Part No. 50002883-001 (Use to cover marks left by old thermostats.) 20
This warranty does not cover removal or reinstallation costs.This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. Honeywell's sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT.THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE FIVE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-4681502. In Canada, write Retail Products ON15-02H, Honeywell Limited/ Honeywell Limite, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9.
Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422
U.S. Registered Trademark. Patents pending. Copyright 2005 Honeywell International Inc. All rights reserved. Printed in U.S. Document number 69-1715. Date 01-2005.
Honeywell Limited-Honeywell Limite 35 Dynamic Drive Scarborough, Ontario M1V 4Z9
Mecanique 25202 KX-TG8321FX CDX-GT130 ZHP615W Dimension 900 Lavamat 6205 KDL-40HX800 Beocom 2500 Vs Snk2 YPR-9 DSP-A500 Datasheet Systeme 5 Motion CT-L77 VGN-FZ21S RD-1000 CDM-3600 BM300 SC-PM25 NWZ-S636F Thermostat Suite Hblg8004R MB4210 Server 2155 DMR-EZ49V Roadgear 260 Rev 1 Thermostat Installation Es30 CCD-TRV26E 797MB TX-32LE7FSA WF210ANW XAA HD7460 Sysmac CJ UE-32C6510 KX-TG2122W AF50 M PDA-4003 FAV50700UW Matrix 1000 CP2500 P2510 PS42B450b1W Volkswagen Golf TH-42PH9UK DLA-SX21 UXP100 HT-EV100 Nikkor CD-323M Tools P13F PS-42Q96HD GR70CAN Hdctm700 Sleeptracker ALL-IN-ONE RM2310 I776 Iden Transsport 1995 KX-TG8021E UX-P400 PS-5000 H Version 2 BX4210A P35 Neo2 SGH-F308 Sanwa M11 NS-P125 CE2944N DSC-P100 Compact 330 AV8003 VCL-ES20 E-105 YZ125-2005 Easyshare C183 Dynaco FM-5 TSU500 Bandu RH177H Radio-recorder Drannor RT34masw JVM210C 13 Ebss HK-7X GSX-R750 Capture STR-DE845 HP-245 CD1401B 02 CDX-GT32W Treo 180 MF-23 MDS-SE9 GPS III CQ-DP383W CPD-L181A
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101