Start Here > > >

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

INSERT BATTERY

In Your Headset

START BLUETOOTH Feature

On Your Phone

TROUBLESHOOTING

My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support.
Insert a new battery into your headset:
H300 Bluetooth Handsfree Headset
Get Connected in 4 Quick Steps
1 - INSERT BATTERY 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - TEST AND USE
Take a moment before you get started to familiarize yourself with your new H300 Handsfree Headset. Blue Indicator Light Call Button Volume Buttons
Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. For most Motorola phones: (Menu 1 Select M( ) > Settings > Connection >
Bluetooth Link > Setup.
1 Open the battery door at the back of the

headset.

2 Scroll to Power. 3 Press Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth
feature. Bluetooth feature remains on until you turn it off.
Battery Door Microphone Speaker Earhook
2 Insert a new battery so that the + and markings match the markings in the battery compartment.
3 Close the battery door.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Part Number: 6809495A08-A If you need more help, contact us at 1-877-MOTOBLU.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. Motorola, Inc. 2005.

Your Headset

Your Phone Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: (Menu 1 Select M( ) > Settings > Connection >

TEST AND USE

USING YOUR H300
See Features and Functions Guide on the reverse side of this guide for information on using your H300.

Step A - PUT HEADSET IN PAIRING MODE Before you can use your headset, you must pair (link) it with your phone. Call Button Blue Indicator Light
Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:
Bluetooth Link > Handsfree > Look for Devices.
1 Place the headset over your ear. See
The phone lists all Bluetooth devices it finds. 2 Select Motorola H300. device. 4 Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000.
"Wearing the Headset" on the reverse side of this guide. to call and press the Send key.
1 With the headset power off, press and hold
the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) remain steadily lit, turn off the headset and repeat step 1.
3 Press OK or Yes to pair (link) the handsfree
2 On your phone, dial the number you want 3 If your phone and headset are successfully
paired, you will hear ringing on the headset.
2 If the indicator light is flashing or does not
When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing.
After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.
Note: To turn off headset, see "Turning On and Off" on the reverse side of this guide.

TURNING ON AND OFF

To turn your headset on, press and hold the Call button until the indicator light flashes. Then, release the button. To turn your headset off, press and hold the Call button until the indicator light flashes rapidly and then turns off. To conserve battery power, turn off your headset when you don't plan to use it for a while.

WEARING THE HEADSET

1 Open the earhook. 2 Loop the earhook over your ear. 3 Press the headset to your ear.
CHANGING FOR USE ON OTHER EAR
You can wear your H300 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:
CHANGING VOLUME BUTTON ORIENTATION
If you change your headset to wear on the other ear, you can also change the orientation of the Volume buttons.

1 Open the earhook 90

degrees from the headset.
1 Turn the headset power off. 2 Press the Call button and the Volume

1 Open Earhook

IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H300.
FOR MORE INFORMATION ON USING YOUR MOTOROLA H300 Visit us at www.hellomoto.com/bluetooth and click Support. SUPPORT If you need more help, contact us at 1-877-MOTOBLU.

2 Gently lift and pull the
top of the earhook up and off the upper hinge pin. Then, pull it away to remove it.
button you want to assign as the "volume up" button until the blue indicator light flashes twice. The headset power turns on. Call Button

2 Pull Earhook Up

040059o

Call Button

3 Flip the headset over. 4 Hook the bottom of the
earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.

Hinge Pin

Volume Buttons

MAKING CALLS

Function Make a voice dial call End a call Receive a call Reject a call Redial last call Answer a second incoming call Action Tap the Call button and speak the name after the tone Tap the Call button Tap the Call button Press and hold the Call button until you hear a beep Press and hold the Call button until you hear a beep Press and hold the Call button (places first call on hold)

MAKING CALLS CONTINUED

Function Toggle between two active calls Join a 3-way call Put an active call on hold or resume a call on hold Transfer a call from the phone to the headset Disable or enable the indicator light Mute or unmute a call Action Press and hold the Call button Press and hold both Volume buttons Press and hold the Call button until you hear a beep Tap the Call button Press and hold both Volume buttons for 3 to 4 seconds Tap both Volume buttons
The indicator lights provide information about your headset status. Indicator Light Off On (steady) 10 rapid flashes Slow pulse Quick flash Headset Status Power off Pairing mode Pairing successful Connected (on a call) Standby (not on call)

INDICATOR LIGHTS

The audio tones provide information about your headset status. Audio Tone Single high tone when pressing volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two ascending tones Two descending tones Headset Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute disabled

AUDIO TONES

Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.
Note: Your H300 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.
Note: Some features are phone/network dependent.

specification sheet

Motorola Bluetooth Wireless Adapter
Simple, Efficient Wireless Mobility
Motorola is responding to your need for wireless communications on the job. Bluetooth wireless technology takes the wires away so youre free to do more, from almost anywhere. For busy professionals on the move, Bluetooth cuts the cords, bringing simplicity and efficiency to almost any situation. The Motorola Bluetooth Adapter for two-way radios is an accessory designed to work with the following models: XTS1500, XTS2250, XTS4250 and HT1000. Users can quickly and easily connect to the compatible Motorola Bluetooth Headset H300*.
Benefits of Motorola Bluetooth Adapter Toggle switch: allows customer to easily switch audio between the Bluetooth Headset H300 and radio loud speaker PTT switch: easily accessible for quick, coordinated communications LED: indicates connection with Bluetooth Headset H300 Communicate flexibly: move up to 30 feet (10 meters) away from your radio with your headset without losing the connection Tested and certified to work with the Motorola H300 Bluetooth Headset Compact, durable adapter connects to the radio quickly and easily Latch and top-screw design helps provide tight connection between the radio and connector Benefits of Motorola H300 Bluetooth Headset Up to approximately 30 hours talk time** Powered by a single replaceable AAA battery no charger required Ergonomic ear hook for optimal wearing comfort on either ear over extended periods of time Improved style, lighter weight and more comfortable design than previous headsets Advanced volume controls can adjust the orientation of volume up button and mute the headset Blue indicator light can be turned on/off There are three items that are available for purchase: RLN6379: Kit includes H300 Bluetooth Headset and Bluetooth Adapter for Radios 98682H: H300 Bluetooth Headset RMN5104: Bluetooth Adapter for Radios
* Bluetooth is a short-range unlicensed frequency that allows for communications without cables over short distances. It is not recommended for first-responder and mission critical users. The Motorola Bluetooth Wireless Adapter has only been tested for compatibility with the Motorola Bluetooth Headset H300 and performance and talk time will vary when using other Bluetooth headsets. ** All talk times are approximate. Battery performance depends on network configuration, signal strength, operating temperature, features selected, and voice, data and other application usage patterns.
SPECIFICATION SHEET MOTOROLA BLUETOOTH ADAPTER Simple, Efficient Wireless Mobility

Bluetooth Adapter

Physical

H300 Headset

Dimensions: Weight: Connector: EPP Compliant:
69 x 33 x 26 mm 30 grams Standard XTS-style connector with 6-pin radio accessory interface Reportable
Dimensions: Weight: Battery: Talk Time:
65 x 21 x 24 mm 25 grams including battery AAA Up to approximately 30 hours
Pairing Environmental Pairing Distance: 6.5V to 9V Pairing Time: Headset within 1 meter of adapter First time: <45 seconds Subsequent: <15 seconds Reconnect After Lost Link: 15 seconds

Voltage Stability:

Operating Temperature:-30C to +60C Storage Temperature: -55C to +85C Thermal Shock: Humidity: -40C to +80C 90-95% RH at +50C for 8 hours

Environmental

Random/Sine Vibration:MIL810F Method 514.5, Procedure I, Category 24 Shock: Drop: Rain: ESD: Dust: Salt/Fog: Solar Radiation: RFI Emissions/ Susceptibility: IP Rating: MIL810F Method 516.5, Procedure I, Functional Shock 48 drop onto tiled concrete floor MIL810F Method 506.4, Procedure I, Blowing Rain IEC 61000-4-2 MIL810F Method 510.4, Procedure I, Blowing Dust MIL810F Method 509.4, Procedure I, Aggravated Screening Method 505.4, Procedure I EN61000-4-3 and EN301-489 IP54 (mated to radio)

Operating Temperature Range: -10C to +60C Storage Temperature Range: Humidity: -10C to +65C 90% humidity at +60C

Source:

Radio battery, 7.5V typical
Motorola, Inc www.motorola.com/governmentandenterprise
All features, functionality and other product specifications are subject to change without notice or obligation. No warranty or guarantee expressed or implied is made regarding the capacity, performance or suitability of any product. MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2008. All rights reserved. LE-BLUETOOTH_ADPTR-PS