iPod Mixer Console

iTRAX BLACK
OPERATIONS MANUAL MANUAL DE INSTRUCCIONES MANUEL DINSTRUCTIONS BEDIENUNGSHANDBUCH
FOR ENGLISH READERS PARA LECTORES EN ESPAOL UTILISATEURS FRANCAIS FR DEUTSCHE LESER Page 2 ~ Page 5 Pgina 6~ Pgina 9 Page 10 ~ Page 13 Seite 14 ~ Seite 17
PLEASE READ BEFORE USING APPLIANCE IMPORTANT WARNING AND SAFETY INSTRUCTIONS!

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN!
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. READ INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference. HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. CLEANING: The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. ATTACHMENTS: Do not use attachments not recommended by the product manufacturer as they may cause hazards. WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. CART: A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. See Figure A. VENTILATION: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. LOCATION: The appliance should be installed in a stable location. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. GROUNDING OR POLARIZATION: If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

Fig. A

POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure B. LIGHTNING: For added protection for this product during a lightening storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightening and power-line surges. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or damaged in any way. When the product exhibits a distinct change in performance, this indicates a need for service. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

Fig. B

iTrax Black TOP

iTrax BLACK

INTRODUCTION:
Congratulations on your purchase of a iTRAX iPod MIXER CONSOLE. The iTRAX, aside from being stylish and easy-to-use, is a high quality DJ mixer that can be used in a variety of settings. With proper care and maintenance, your mixer will provide years of reliable performance.

FEATURES:

- Dual docking stations for Apple iPod digital music players - USB port with dock switch allows library management via PC - 2 Phono/Line convertible inputs for use with additional devices - 3-Band rotary EQ with gain and cut feature per channel - " (6.35mm) Mic input with 2-Band EQ controls - Master and Record RCA outputs - Input selection switches - Cue section with CH1/CH2 cue fader - User replaceable X-Fader - Lightweight, slimline design for complete portability
CONVERTIBLE PHONO/LINE INPUTS: The iTRAX has 2 CONVERTIBLE PHONO/LINE (PH/LN) RCA INPUTS These small switches which are located to the right of the RCA inputs for channels 1 and 2 allow you to choose between a PHONO (Turntable) input or a LINE level (Mp3, CD, Tape player etc.).and require the proper switching. When switched to the PH position you may use any Turntable with a magnetic cartridge, remember to connect your ground wire (see GROUNDING SCREW) or there may be a system hum. CHANNEL INPUTS: Now you may plug the RCAs from your playable medium into each input to be connected to their respective CHANNELS (CH).
NOTE: CONNECTING A LINE LEVEL DEVICE TO A PH INPUT MAY CAUSE THAT MIXER CHANNEL TO OVERLOAD AND OR DISTORT.
GROUNDING SCREW: When using a turntable(s), you will need to ground the RCA cable(s) by screwing in the grounding fork(s) to the GROUNDING SCREW located on the rear panel of the iTRAX mixer. play it, you can adjust the volume and PGM mix of the HEADPHONE (see CONTROLS). USB INPUT: This port allows you to use your iTRAX as a dock for your iPods. Using a standard A-to-B type USB cable, connect the iTRAX to any personal computer. Upon inserting your iPod into the iPod DOCK, it may be accessed via your PC, for the purpose of managing music collections.The iPod which is accessed through the USB INPUT is determined by the position of the iPod 1/ iPod 2 USB SELECTOR switch. USB SELECTOR:If there is an iPod connected to your PC via the USB Input, you must eject it properly, and remove the USB cable prior to moving the position of the iPod 1/iPod 2 USB Selector switch. Once you have followed this procedure, you may reconnect the USB cable and manage music on the opposite iPod. Please note that if you plan on using multiple iPods in conjunction with iTunes software, you should disable automatic updates first to prevent iTunes from erasing your music during syncronization! Gemini assumes no liability arising from the inability to configure iTunes properly! iPod DOCK and DOCKING CRADLE: In conjunction with the DOCKING CRADLE, the iPod DOCK is where the iPod connects to the mixer for both audio and charging capabilities. Then when all of your connections have been made turn on the mixer by pressing the POWER SWITCH.

PRECAUTIONS:

1. All instructions should be read before using this equipment. 2. To reduce the risk of electrical shock, do not open the unit. Please refer all servicing needs to a Gemini-qualified service technician. 3. Do not expose this unit to direct sunlight or a heat source such as a radiator or stove. 4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 5. When moving this equipment it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 7. DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON CONTROLS, SURFACES OR SWITCHES.
IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT: 1 (732) 346-0061. DO NOT ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER.

CONNECTIONS:

AC INLET : The AC INLET, located on the rear of the unit, is the connector which accepts the AC ADAPTER (supplied) used to power the unit. POWER SWITCH: The POWER SWITCH turns the unit ON or OFF. Make sure the switch is in the OFF position prior to making any connections. RCA MASTER OUTPUTS: These audio outputs carry unbalanced audio signals from the Master bus of the mixer. The MASTER VOLUME CONTROL determines the level of audio which is sent to these outputs. RECORD RCA OUTPUTS: These outputs is best suited for connecting a recording device, as it is not altered by the MASTER VOLUME CONTROL. This is useful in a live setting when you are required to change the overall volume of your output, but you do not want to change the level of audio being fed to the recording device. If you are not using a recording device, these outputs are capable of driving another amplifier or speaker system, but the volume will have to be set independently from the MASTER.

CONTROLS:

CHANNEL INPUT SELECTOR: The CHANNEL INPUT SELECTOR switches allow you to choose which input will be controlled by that channels corresponding volume FADER. For example on CHANNEL (1) the INPUT SELECTOR allows you to choose between iPod 1 and LINE 1 , and also on CHANNEL (2) the INPUT SELECTOR SWITCH will let you choose between iPod 2 and LINE 2 input.
MASTER VOLUME ROTARY: The MASTER VOLUME ROTARY knob adjust the volume of the MAIN output. CHANNEL GAIN CONTROL: These controls, found on each mixer channel, allow you to increase or decrease the volume of each channel. This is useful for matching levels during mixing, or to make additional signal boosts when the CHANNEL VOLUME FADERS do not provide enough.
3 BAND EQUALIZER: The 3 BAND EQUALIZER adjust the tone of each CHANNEL by giving you a choice 3 frequencies (BANDS) to adjust , from LOW, MIDRANGE (MID) and HIGHs, you can use the adjustment knobs to higher or lower the 3 separate frequencies till the sound of the music program is appropriate for your listening environment. VU METER: The iTRAX has a VU METER that allows you to monitor the decibel levels of the LEFT and RIGHT MASTER output. CHANNEL VOLUME FADER: After you have chosen which input you will use with the INPUT SELECTOR the corresponding CHANNEL FADER will allow you to adjust the volume for that particular CHANNEL. CROSSFADER: The CROSSFADER allows you to mix evenly from one source to another. The CROSS FADER on the iTRAX is also removable and if the need arises can be replaced.The RG-45 (RAILGLIDE) DUAL-RAIL CROSS FADER, which has internal dual stainless steel rails that allow the slider to ride smoothly and accurately from end to end can be purchased from your local GEMINI dealer. 1/4 MIC INPUT: This input is found on the face of the mixer, and is used for connecting microphones that are terminated with a 1/4 connector. This input is controlled solely by the volume and EQ controls found directly to the right of the jack. MICROPHONE VOLUME: Allows you to adjust the volume of the microphone signal. MICROPHONE EQ: The MICROPHONE EQ Lets you to control the low frequency and the high frequency of the microphone signal. CHANNEL CUE SELECTOR: The CHANNEL CUE SELECTOR allows you to choose which channel you wish to monitor in your headphones.F CUE VOLUME ROTARY KNOB: The CUE VOLUME ROTARY KNOB adjusts your HEADPHONE MONITOR OUTPUTS volume.O HEADPHONE OUTPUT: The HEADPHONE OUTPUT located at the front of the iTRAX will accept any headphone with a standard 1/4 connector and or adapter and will allow you to CUE your music program before you play it.

Save postage and register your product online at www.geminidj.com and automatically be registered for great prize giveaways!
If you do not have internet access, fill out the form below and mail to the appropriate address listed at the right side of this page.
GEMINI SOUND PRODUCTS Worldwide Headquarters 1 Mayfield Ave Edison, NJ 08837 USA Tel: (732) 346-0061 Fax: (732) 346-0065

FRANCE

GCI TECHNOLOGIES S.A.R.L 1, Allee dEffiat, Parc de levnement, 91160 Longjumeau, France Tl: + Fax: + 97 80

First Name

Initial:

Last Name:

Address: (Number and Street) City: State: or Country: Zip Code:

Apt #:

GERMANY
GCI TECHNOLOGIES Liebigstr. 16, Haus B 3. OG, 85757 Karlsfeld Germany Tel: 0 Fax: 8

Province:

Postal Code: or

E-mail Address: Phone #:

___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Date of Birth

.00 GEMINI SOUND PRODUCTS Unit C4 Hazleton Industrial Estate, P08 9JU Waterlooville, UK Tel: 00880 Fax: 00990
Date of Purchase: Month City: Model Number: (Example: CDT-05) Day Year

Purchase Price:

(EXCLUDING TAX)
Serial Number: (Located on back of most units)
Cut along this line & keep the rest of this page for your records.
GEMINI SOUND PRODUCTS S.A. Rosello, 516, 08026 Barcelona, Spain Tel: 3493-00 Fax: 3493-347-6961

WARRANTY AND REPAIR:

All Gemini products are designed and manufactured to the highest standards in the industry. With proper care and maintenance, your product will provide years of reliable service.
mandated by local statutes.

RETURN/REPAIR

A. In the U.S.A., please call our helpful Customer Service Representatives at (732)738-9003, and they will be happy to give you a Return Authorization Number (RA#) and the address of an authorized service center closest to you. B. After receiving an RA#, include a copy of the original sales receipt, with defective product and a description of the defect. Send by insured freight to: Gemini Sound Products Corp, and use the address provided by your customer service representative. Your RA# must be written on the outside of the package, or processing will be delayed indefinitely! C. Service covered under warranty will be paid for by Gemini and returned to you. For non-warrantied products, Gemini will repair your unit after payment is received. Repair charges do not include return freight. Freight charges will be added to the repair charges. D. On warranty service, you pay for shipping to Gemini, we pay for return shipping within the Continental United States. Alaska, Hawaii, Puerto Rico, Canada, Bahamas, and the Virgin Islands will be charged for freight. E. Please allow 2-4 weeks for return of your product. Under normal circumstances your product will spend no more than 10 working days at Gemini. We are not responsible for shipping times.

LIMITED WARRANTY

A. Gemini warrants its products to be free from defects in materials and workmanship for One (1) year from the original purchase date. Exceptions: Laser assemblies on CD Players, cartridges, and crossfaders are covered for 90 days. B. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use, faulty installation, improper maintenance or any repairs other than those provided by an authorized Gemini Service Center. C. There are no obligations of liability on the part of Gemini for consequential damages arising out of or in connection with the use or performance of the product or other indirect damages with respect to loss of property, revenues, of profit, or costs of removal, installation, or reinstallation. All implied warranties for Gemini, including implied warranties for fitness, are limited in duration to One (1) year from the original date of purchase, unless otherwise
IN THE USA: IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT, CALL 1-732-346-0061 FOR GCI TECHNOLOGIES CUSTOMER SERVICE. DO NOT ATTEMPT RETURN THIS EQUIPMENT TO YOUR DEALER.
Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. GCI Technologies Corp. shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of GCI Technologies Corp. It is recommended that all maintenance and service on this product is performed by GCI Technologies Corp. or its authorized agents. GCI Technologies Corp. will not accept liability for loss or damage caused by maintenance or repair performed by unauthorized personnel.
Worldwide Headquarters 1 Mayfield Ave, Edison, NJ 08837 USA Tel: (732) 346-0061 Fax: (732) 346-0065
France GCI technologies France S.AR.R.L 1, Alle dEffiat, Parc de levnement, 91160 Longjumeau, France Tl: + Fax: + Germany GCI Technologies GmbH Lerchenstrasse 14 , Haus 3 1. Stock , 80995 Mnchen, Germany Tel: 49 (0) Fax: 08131 - 39171-9 UK GCI Technologies 44 The Brambles Enterprise Centre, PO7 7TH Waterlooville, UK Tel: 00880 Fax: 00990 Spain GCI Technologies S.A. Rosello, 516, 08026 Barcelona, Spain, Tel: 349-3435-0814 Fax: 3493-347-6961

GCI Technologies Corp. 2007 All Rights Reserved.