Do not incinerate the product. Never throw the product into fire. Doing so can cause it to explode, creating the risk of fire and personal injury. Water and Foreign Matter Water, other liquids, and foreign matter (such as pieces of metal) getting into the product create the risk of fire and electric shock. Take the following steps immediately. 1. Turn off power. 2. If you are using the AC adaptor for power, unplug it from the wall outlet. 3. Contact your original retailer or an authorized CASIO Service Provider. Disassembly and Modification Never try to take this product apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, or other personal injury. Leave all internal inspection, adjustment, and maintenance up to your original retailer or authorized CASIO Service Provider. Dropping and Impact Continued use of this product after it has been damaged by dropping or subjecting it to strong impact creates the risk of fire and electric shock. Take the following steps immediately. 1. Turn off power. 2. If you are using the AC adaptor for power, unplug it from the wall outlet. 3. Contact your original retailer or an authorized CASIO Service Provider.
Plastic Bags Never place the plastic bag the product comes in over your head or in your mouth. Doing so creates the risk of suffocation. Particular care concerning this precaution is required where small children are present. Keep off of the product and stand.* Climbing onto the product or stand can cause it to tip over or become damaged. Particular care concerning this precaution is required where small children are present. Location Avoid locating the product on an unstable stand, on an uneven surface, or any other unstable location. An unstable location can cause the product to fall over, creating the risk of personal injury.

662A-E-005A

AC Adaptor G Misuse of the AC adaptor creates the risk of fire and electric shock. Always make sure you observe the following precautions. Do not locate the electric cord near a stove or other sources of heat. Never pull on the cord when unplugging from the electrical outlet. Always grasp the AC adaptor when unplugging. G Misuse of the AC adaptor creates the risk of fire and electric shock. Always make sure you observe the following precautions. Insert the AC adaptor into the wall outlet as far as it will go. Unplug the AC adaptor from the wall outlet during lightening storms or before leaving on a trip or other longterm absence. At least once a year, unplug the AC adaptor from the wall outlet and wipe away any dust that is built up in the area around the prongs of the plug. Relocating the Product Before relocating the product, always unplug the AC adaptor from the wall outlet and disconnect all other cables and connecting cords. Leaving cords connected creates the risk of damage to the cords, fire, and electric shock.

Cleaning Before cleaning the product, always unplug the AC adaptor from the wall outlet first. Leaving the AC adaptor plugged in creates the risk of damage to the AC adaptor, fire, and electric shock. Batteries Misuse of batteries can cause them to leak resulting in damage to nearby objects, or to explode, creating the risk of fire and personal injury. Always make sure you observe the following precautions. Use only batteries that are specified for use with this product. Remove batteries from the product if you do not plan to use it for a long time. Connectors Connect only the specified devices and equipment to the products connectors. Connection of a nonspecified device or equipment creates the risk of fire and electric shock. Location Avoid the following locations for this product. Such locations create the risk of fire and electric shock. Areas subject to high humidity or large amounts of dust. In food preparation areas or other areas subject to oil smoke. Near air conditioning equipment, on a heated carpet, in areas exposed to direct sunlight, inside of a vehicle parked in the sun, or any other area that subjects the product to high temperatures.

662A-E-006A

Display Screen Never push on the display screens LCD panel or subject it to strong impact. Doing so can cause the LCD panels glass to crack, creating the risk of personal injury. Should the LCD panel ever crack or break, never touch the liquid inside of the panel. LCD panel liquid can cause skin irritation. Should LCD panel liquid ever get inside your mouth, immediately wash out your mouth with water and contact your physician. Should LCD panel liquid ever get into your eyes or onto your skin, rinse with clear water for at least 15 minutes, and then contact a physician. Sound Volume Do not listen to music at very loud volumes for long periods. Particular care concerning this precaution is required when using headphones. High volume settings can damage your hearing. Health Precaution In extremely rare cases, exposure to strong sudden light or flashing light can cause momentary muscle spasms, loss of consciousness, or other physical problems with some individuals. If you suspect that you might be susceptible to any condition such as this, be sure to consult with your physician before using this product. Use this product in an area that is well illuminated. Should you ever feel any symptoms similar to those described above when using this product, stop using it immediately and contact your physician.
Heavy Objects Never place heavy object on top of the product. Doing so can make the product top heavy, causing the product to tip over or the object to fall from it, creating the risk of personal injury. Correct Stand* Assembly An incorrectly assembled stand can tip over, causing the product to fall and creating the risk of personal injury. Make sure you assemble the stand correctly, following the assembly instructions that come with it. Make sure you mount the product on the stand correctly. * Stand is available as an option.

662A-E-008A

Contents
Safety Precautions. E-1 Main Features. E-6 General Guide. E-8
Attachment of Score Stand. E-9
3-Step Lesson System. E-21
Using 3-Step Lesson System. E-21 Voice Fingering Guide..E-23 Timing Indicator.. E-23 Step 1: Master the timing.. E-24 Step 2: Master the melody.. E-25
Quick Reference. E-10 Power Supply.. E-11
Using batteries... E-11 Using the AC Adaptor.. E-11 Auto Power Off...E-12 Power On Alert...E-12
Step 3: Play at normal speed. E-25 To practice the left hand part. E-26

MIDI.. E-27

What is MIDI?.. E-27 General MIDI.. E-27
Technical Reference. E-29
Troubleshooting.. E-29 Specifications.. E-31
Care of Your Keyboard. E-12 Connections.. E-13
Phones/Output Jack.. E-13 Sustain Jack.. E-13 Using the Microphone Jack. E-13 Accessories and Options.. E-14

Appendix. A-1

GM Tone Map List.. A-1 Rhythm List..A-2 Fingered Chord Charts.. A-3

Basic Operations.. E-15

To switch power on and off..E-15 To change tones..E-15 Other Useful Functions..E-16 Playing the demo tunes.. E-17 Playing rhythms.. E-18 Using auto-accompaniment. E-18 Improvising with the preset patterns. E-20
MIDI Implementation Chart

662A-E-009A

General Guide

662A-E-010A

1 MIC VOLUME slider 2 POWER/MODE selector 3 Power indicator 4 MAIN VOLUME slider 5 DEMO button 6 KEY LIGHT button
F 100 SONG BANK list G Display H 50 RHYTHMS list See Rhythm List on page A-2 for details. I 100 TONES list See GM Tone Map List on page A-1 for details. J Voice 1 to 5 K TRANSPOSE/TUNE/LOCAL CONTROL operation guide L Number buttons

G RHYTHM CONTROLLER

7 SYNCHRO/FILL-IN button 8 START/STOP button 9 TEMPO buttons 0 SONG BANK button A RHYTHM button B TONE button C Percussion instrument list D CHORD root names E Speakers

G 3-STEP LESSON

M STEP 1 button N STEP 2 button O STEP 3 button P PART SELECT button Q ONE KEY PLAY buttons R SPEAK button

* Rear Panel

S T U V W X S MIDI OUT terminal T MIDI IN terminal U SUSTAIN jack V DC 9V jack W PHONES/OUTPUT jack For connection of commercially available headphones. Output from the speakers is automatically cut when headphones are connected. X MIC IN jack
** Attachment of Score Stand Insert both ends of the music stand provided with the keyboard into the two holes on the top surface.

Using batteries

Always make sure you turn off the keyboard before loading or replacing batteries.

To load batteries

Remove the battery compartment cover. Load 6 AA-size batteries into the battery compartment.
Make sure that the positive (+) and negative () ends are facing correctly.
Misuse of batteries can cause them to leak resulting in damage to nearby objects, or to explode, creating the risk of fire and personal injury. Always make sure you observe the following precautions. Use only batteries that are specified for use with this product. Remove batteries from the product if you do not plan to use it for a long time.
Insert the tabs on the battery compartment cover into the holes provided and close the cover.

Using the AC Adaptor

Make sure that you use only the AC adaptor specified for this keyboard. Specified AC Adaptor: AD-5
DC 9V jack AC adaptor AD-5
The keyboard may not function correctly if you load or replace batteries with power turned on. If this happens, turning the keyboard off and then back on again should return functions back to normal.
Important Battery Information
I The following shows the approximate battery life. Alkaline batteries.. 4 hours Manganese batteries.. 1 hour The above value is standard battery life at normal temperature, with the keyboard volume at medium setting. Temperature extremes or playing at very loud volume settings can shorten battery life.

AC outlet

Note the following important precautions to avoid damage to the power cord. G During Use Never pull on the cord with excessive force. Never repeatedly pull on the cord. Never twist the cord at the base of the plug or connector. The power cord should not be stretched tight while it is in use. G During Movement Before moving the keyboard, be sure to unplug the AC adaptor from the power outlet. G During Storage Loop and bundle the power cord, but never wind it around the AC adaptor.

662A-E-013A

Care of Your Keyboard
Make sure that the keyboard is turned off before connecting or disconnecting the AC adaptor. Using the AC adaptor for a long time can cause it to become warm to the touch. This is normal and does not indicate malfunction.

Howling (Feedback Noise)

Any of the following conditions can cause howling (feedback noise). Covering the head of the microphone with your hand Positioning the microphone too near to a speaker Should howling occur, try grasping the microphone further away from the head, and move away from any nearby speaker.

Static Noise

Fluorescent lighting can cause static noise in the microphone signal. When this happens, move away from the lighting you suspect may be causing the static.

Accessories and Options

Use only the accessories and options specified for this keyboard. Use of non-authorized items creates the danger of fire, electrical shock, and personal injury.

662A-E-016A

Basic Operations
MAIN VOLUME POWER/MODE DEMO RHYTHM TONE Number buttons
SYNCHRO/FILL-IN START/STOP

SONG BANK TEMPO

This part of the manual provides you with the basic information you need to use your keyboard.
Always enter two digits for the tone number. If you enter only one digit, the display will automatically return to the previous tone number setting after a few seconds. If you change the tone setting while a keyboard key is depressed, the tone does not change until you release the key and press a keyboard key again. With certain tones (such as percussion sounds and sound effects), there may be very little or no change at all in the pitch, no matter which keyboard key you press. If you input the wrong first digit for a tone number, you can return to the previous setting by pressing the TONE button.
To switch power on and off

1. 2. 3. 4.

Set the POWER/MODE selector to NORMAL. Press the keyboard keys. Use the MAIN VOLUME slider to set the volume to a relatively low level. To switch power off, set the POWER/MODE selector to OFF position.

Keyboard split tones

Some of the preset tones split the keyboard and assign two or more sounds. With such a preset tone, the sound produced depends on what position of the keyboard you play. For example, BASS/PIANO (tone 90) puts BASS on the left and PIANO on the right of the keyboard. <Example>

To change tones

Look at the tone list* printed on the keyboards console and find the one you want.

* See GM Tone Map List on page A-1 for details.

BASS/PIANO (No.90)

Press the TONE button.

Indicator appears

BASS PIANO

Gr andPno

Use the number buttons to input the 2-digit number that identifies the tone you want to select.
Example: To select 26 ACOUSTIC BASS, input 2 and then 6.
PERCUSSION (No.99) PERCUSSION (Tone 99) assigns 35 percussion sounds and five voice sounds to the keyboard as shown below. The sounds assigned to each key are indicated above the keyboard.

Aco. Ba s s

662A-E-017A
BASS DRUM SIDE STICK ACOUSTIC SNARE HAND CLAP ELECTRIC SNARE LOW FLOOR TOM CLOSED HI-HAT HIGH FLOOR TOM PEDAL HI-HAT LOW TOM OPEN HI-HAT LOW MID TOM HIGH MID TOM CRASH CYMBAL 1 HIGH TOM RIDE CYMBAL 1 CHINESE CYMBAL RIDE BELL TAMBOURINE SPLASH CYMBAL
COWBELL CRASH CYMBAL 2 CLAVES RIDE CYMBAL 2 HIGH BONGO LOW BONGO MUTE HIGH CONGA OPEN HIGH CONGA LOW CONGA HIGH TIMBALES LOW TIMBALES HIGH AGOGO LOW AGOGO CABASA MARACAS VOICE 1 VOICE 2 VOICE 3 VOICE 4 VOICE 5

Other Useful Functions

To change the key of the keyboard
The transpose feature of this keyboard lets you raise or lower its key in semitone increments. This means you can easily match to suit someones voice, and you can eliminate sharps and flats from music making it easier to play.
While in any mode besides the Song Bank Mode (indicated when the SONG BANK indicator is lit), hold down the TONE button and press the RHYTHM button.
Perform step 2 within five seconds after performing step 1.

T r ans

Use the TEMPO buttons to change the key of the keyboard.
Example: To change the tuning to B (indicated by -1 since it is one tone below C, which is the normal tuning of the keyboard).

Polyphony

The term polyphony refers to the maximum number of notes you can play at the same time. This keyboard has 12-note polyphony, which includes the notes you play as well as the rhythms and auto-accompaniment patterns that are played by the keyboard. This means that when a rhythm or autoaccompaniment pattern is being played by the keyboard, the number of notes (polyphony) available for keyboard play is reduced. Also note that some of the tones offer only 6-note polyphony. When rhythm or auto accompaniment is playing, the number of sounds simultaneously played is reduced. Though you can sound up to 12 notes at one time, only the last four keyboard keys pressed light up.

Switch power on and adjust the volume level. Press the DEMO button.
Demo tune play continues in a sequential endless loop until you switch it off. The number and name of the demo tune currently playing are shown on the display. You can play along on the keyboard while a demo tune is playing back.
Use the TEMPO buttons to change the tuning of the keyboard.
Example: To lower tuning by 20
You can change the demo tune play being played by pressing the number buttons.
The Song Bank tunes play back in tune number sequence, starting from the one you select.

To stop demo tune play

Press the DEMO button or START/STOP button again to stop demo tune play.

662A-E-019A

Only the following buttons are enabled while a Song Bank tune is being played. MAIN VOLUME slider Number buttons START/STOP button POWER/MODE selector (OFF) DEMO button KEY LIGHT button SPEAK button You cannot change the tone being used for the melody of a Song Bank tune.
Use the TEMPO buttons to adjust the tempo of the rhythm.

Playing rhythms

This keyboard features a collection of 50 exciting built-in rhythm patterns. Each pattern provides percussion back up for all your performances.
Each time you press one of the TEMPO buttons while the tempo value is displayed, the tempo setting changes one step, within the range of 040 to 255. The initial default tempo setting when you turn on power is 120. After displaying the current tempo setting by pressing the TEMPO button in step 6, you can also input the tempo setting you want by inputting a three-digit value with the number buttons. Holding down either of the TEMPO buttons changes the tempo setting at high speed. To reset the tempo to the standard value of each rhythm, press both TEMPO buttons.
To select and play a rhythm
To stop rhythm play, press the START/STOP button again.
Set the POWER/MODE selector to NORMAL. Find the rhythm you want to use in the Rhythm List (page A-2) and note its rhythm number. Press the RHYTHM button.

When you do, the RHYTHM indicator appears. The number and name that appear on the display indicate the currently selected rhythm.

Using auto-accompaniment

This keyboard features 50 accompaniment patterns that let you add full accompaniments to your performances automatically. With auto-accompaniment, part of the keyboard is reserved as an accompaniment keyboard. As you play your chords on the accompaniment keyboard, the accompaniment pattern adjusts automatically to follow the progression you play. You get a choice between two different methods for chord play. FINGERED lets you play chords as you normally do, while CASIO CHORD makes it possible to play fully formed chords with one finger.
Use the number buttons to input the 2-digit rhythm number for the rhythm you want to use.
Example: To select 37 SAMBA, input 3 and then 7.

S amb a

Be sure to always specify a 2-digit number. If you discover a mistake before you input the second digit, press the RHYTHM button to return to the previously set rhythm number. You can change to another rhythm even while the current rhythm is sounding.
About the accompaniment keyboard
The lower (left) 1.5 octaves are reserved for use as an accompaniment keyboard whenever you select CASIO CHORD or FINGERED with the POWER/MODE selector. The panel above the accompaniment keyboard keys is marked with the names of the notes they play. The remainder of the keyboard (the part that is not included in the accompaniment keyboard) is called the melody keyboard. Please be sure to remember these terms, because they will be used throughout the rest of this manual.
Press the START/STOP button to start play of the rhythm.
When you do, the selected rhythm starts to sound.
Accompaniment keyboard Melody keyboard
The entire keyboard can be used for melody play while the POWER/MODE selector is set to NORMAL.

662A-E-020A

Using the CASIO CHORD system
The CASIO CHORD system lets you easily play the four main types of chords. Play of chords is simplified as shown in the chart below. Keys Type C (C Major Chord) Cm (C Minor Chord) C7 (C Seventh Chord) Cm7 (C Minor Seventh Chord) Example
CC DE E FF GA A B B CC DE E F
Continue pressing different keys on the accompaniment keyboard to play your chord progression. To stop auto-accompaniment play, press the START/STOP button again.

To play a built-in Song Bank tune
Look up the number of the tune you want to play in the Song Bank list. Press the SONG BANK button until the SONG BANK indicator appears.
This causes the number and name of the currently selected Song Bank tune to appear on the display.
Step 2: Master the melody
In this step, you use the display to learn which fingers you should use to play, and the key light system to learn which keyboard keys to press. You can play at the pace you want, because the auto-accompaniment or left hand part waits until you press the correct key.
Input the two digit number for the tune you want to play.
Example: To select 13 TWINKLE TWINKLE LITTLE STAR, input 1 and then 3.
Step 3: Play at normal speed
At this level, the keyboards keys still light to indicate which notes to play, but they no longer wait for you to press the correct key. The auto-accompaniment or left hand part is played at normal speed.
Press the START/STOP button to start play of the selected tune.
The tune you select plays repeatedly, with the keyboard keys lighting to indicate the melody notes.

662A-E-023A

To stop Song Bank tune play, press the START/ STOP button again. To exit the Song Bank Mode, press the SONG BANK button again.
When you do, the SONG BANK indicator goes out.
Crossed Finger Indications
The display also shows when you have to cross fingers to play notes, and in which direction your fingers should cross. Example: Display for playing the notes below with the right hand
Always enter two digits for the Song Bank number. You can input a Song Bank tune number even while another Song Bank tune is playing. If you input the wrong first digit for a Song Bank tune number, you can return to the previous setting by pressing the SONG BANK button. The RHYTHM button is disabled in the Song Bank Mode. If you want to play a rhythm, press the SONG BANK button to return to the normal mode first.

3 A 1 B 2 C 1 D 3 E

Using the Song Bank

Crossed finger display

Key Lighting System Operation and Display Contents During Song Bank Play
Keyboard keys light to show the keys that should be pressed to play along with Song Bank tunes as they play back. At the same time, the display shows fingerings, chord names, tempo and other information.
B and C indicate that the index finger should cross over the thumb. C and D indicate that the thumb should cross under the index finger.
Key Lighting During Song Bank Play
When you play back a Song Bank tune, keyboard keys light to show you the notes that are being played.
Auto-accompaniment Song Bank Tune
Chord and melody part keys light.
Chord The root (the C-note of a C-chord) and other notes that make up the chord alternately light. Chord name Tempo value Fingering Melody note lights.
Some Song Bank tunes use chords (such as C6) that cannot be played with the FINGERED setting (page E-19). In the FINGERED mode, chords may sound different from the ones produced by Song Bank tune playback, even if you finger the chords as indicated by the lit keys.

Two-hand Song Bank Tune

Left hand and right hand part keys light.

Left hand part

Right hand part

662A-E-024A

Key Lighting System Operation and Display Contents During 3-step Lesson Play
Whenever you select an Auto Accompaniment tune (00 to 83) for 3-step lesson play, the key lighting system shows you which keys to press, while the display shows you the fingerings.

Voice Fingering Guide

Voice fingering guide uses a simulated human voice to call out fingering numbers during Step 1 and Step 2 one-hand part practice. If you need to press a key with your thumb, for example, voice fingering guide says, One! In the case of a chord to be played with your thumb, middle and little finger, voice fingering guide says, One, three, five! Voice Fingering Guide calls out fingerings only when you do not press the proper key when you should.

Note Pitch

The keyboard key that should be pressed lights. The fingers you should use to play the notes are also shown on the display.

Note Length

Keyboard keys stay lit for as long as the note should be played. The fingerings also remain on the display for the length of the note.
To turn voice fingering guide on and off
Use the SPEAK button to turn voice fingering guide on and off.

Next Note

The keyboard key for the next note to be played flashes, while a number appears on the display near the finger you should use to play the next note.
Voice fingering guide indicator
Series of Same Pitch Notes
The keyboard key light turns off momentarily between the notes and lights again for each successive note. The fingerings also turn off and back on again. Example: When play requires pressing keys with fingers 3, 2, and then 1
1st Note Next note Current note 2nd Note 3rd Note

Timing Indicator

The timing indicator helps you become familiar with tunes you are playing for the first time by indicating the timing of notes you play on the keyboard. Timing is easier to see when you use a slow tempo during lesson play.
Using the Timing Indicator
The timing indicator shows the timing of notes contained in the currently selected part (R or L). Notes are indicated as two-segment blocks that scroll from the top of the display, down to the bottom. A note is played when its block reaches the bottom of the display.

Flash Lit

Key light

When you are using this keyboard in a stand-alone configuration, keyboard keys do not light while local control is turned off.
To turn off LOCAL CONTROL/To turn on GM mapping
Use the TEMPO button ( ) to turn off local control.
This also turns on GM mapping.

662A-E-030A

Technical Reference

Troubleshooting

Be sure to check the following table whenever you experience problems with keyboard operation. Symptom No sound when keyboard keys are pressed. Cause 1. Power supply problem. Action 1. Correctly attach the AC adaptor, make sure that batteries (+/) are facing correctly, and check to make sure that batteries are not dead. 2. Use the MAIN VOLUME slider to increase volume. 3. Unplug the headphones from the PHONES/OUTPUT jack. 4. Normal play is not possible on the accompaniment keyboard while the POWER/MODE selector is set to CASIO CHORD or FINGERED. Change the POWER/MODE selector setting to NORMAL. 5. While 99 PERCUSSION is selected, you can use only keys that are marked on the console with illustrations of percussion instruments. 6. Turn on LOCAL CONTROL. Replace the batteries with a set of new ones or use the AC adaptor. See Page Page E-11
2. Volume setting is too low. 3. Headphones are plugged into the keyboard. 4. The POWER/MODE selector is in the CASIO CHORD or FINGERED position.
Page E-15 Page E-13 Page E-18
5. Tone 99 PERCUSSION is selected and you are pressing keys that are not assigned tones.

Page E-15

6. LOCAL CONTROL is off. Any of the following symptoms while using battery power. Low battery power

Page E-28 Page E-11

Dim power indicator Instrument does not turn on Display that is flickering, dim, or difficult to read Abnormally low speaker/headphone volume Distortion of sound output Occasional interruption of sound when playing at high volume Sudden power failure when playing at high volume Flickering or dimming of the display when playing at high volume Continued sound output even after you release a key A tone that is totally different from the one that is selected Abnormal rhythm pattern and Song Bank play Loss of power, sound distortion, or low volume when playing from a connected computer or MIDI device Abnormally low microphone volume Distortion of microphone input Dim power supply indicator when a microphone is used Key light stays on. Keyboard is waiting for play of the correct note during Step 1 or Step 2 play. Power on alert is telling you that power is left on. 1. Press the lit key to continue with Step 1 or Step 2 play. 2. Press the START/STOP button to quit Step 1 or Step 2 play. Press any button or keyboard key to resume normal operation with the keyboard in its initial power on setting. Pages E-24, 25 Pages E-24, 25 Page E-12

Keyboard keys light but no sound is produced.

662A-E-031A

Symptom RHYTHM button does not work. Cannot change TRANSPOSE/ TUNE/LOCAL CONTROL settings. No sound is produced when playing MIDI data from a computer. Playing on the keyboard produces an unnatural sound when connected to a computer. Static noise when a microphone is connected.
Cause Keyboard is in the Song Bank Mode. Keyboard is in the Song Bank Mode. Demo tune play is in progress. MIDI cables are not connected properly. The computers MIDI THRU function is turned on.
Action Press the SONG BANK button to return to the normal mode. Press the SONG BANK button to return to the normal mode. Stop demo tune play. Connect MIDI cables properly.
See Page Page E-21 Page E-21 Page E-17 Page E-27
Turn off the MIDI THRU function on the computer or turn off LOCAL CONTROL on the keyboard. 1. Use a full metal shielded Cannon type microphone. 2. Move the microphone away from source of the static. 1. Increase the microphone volume setting. 2. Change the microphone on/off switch setting to on.

Page E-28

1. Use of a microphone that is a different from the type that is recommended. 2. Use of the microphone in the vicinity of fluorescent lighting. 1. Microphone volume setting is too low. 2. Microphone on/off switch is set to off.

Page E-13

Page E-13 Page E-13 Page E-13

No microphone sound.

A tones quality and volume sounds slightly different depending where it is played on the keyboard.
This is an unavoidable result of the digital sampling process,* and does not indicate malfunction. * Multiple digital samples are taken for the low range, middle range, and high range of the original musical instrument. Because of this, there may be a very slight difference in tonal quality and volume between sample ranges.

662A-E-032A

Specifications
Model: Keyboard: Key Light System: Tones: Polyphony: 3-Step Lesson System: Playback: Voice Fingering Guide: Auto-accompaniment Rhythm patterns: Tempo: Chords: Other: Song Bank tunes: Musical Information Function: LK-standard-size keys; 5 octaves Can be turned on and off (up to 4 keys can be lit at the same time) 100 presets 12 notes maximum Number of simultaneosly lit keys; 4 3-Steps 1 tune repeat playback On/Off 50 presets Adjustable, (216 steps, = 40 to 255), initial value; 120 Two systems; CASIO CHORD, FINGERED Fill-in pattern, Synchro start 100 tunes Tone, Auto Accompaniment, Song Bank numbers and names; tempo, 3 step lesson display, chord name, fingering, timing indicator, key lighting, voice fingering F# to C to F: half-note Adjustable A4 = Approx. 440 Hz 50 cents, Initial value: A4 = Approx. 440 Hz 5 multi-timbre receive 10 cm diameter 2 (Output: 2W+2W) IN, OUT Standard jack DC 9V jack Stereo standard jack (Output is monaural.) [output impedance: 78, output voltage: 4V (RMS) MAX] Standard jack (with microphone volume slider) Input impedance: 2K Input sensitivity: 10mV 2-way 6 AA-size Approximately 4 hours continuous operation on alkaline batteries Approximately 1 hour continuous operation on manganese batteries AD-5 Approximately 6 minutes after the last operation (Operates during battery use only) 9V 7.7 W 94.5 37.3 13.5 cm (37 1/4" 14 11/16" 5 5/16") Approximately 4.7 kg (10.4 lbs) (without batteries)

:True #

System Exclusive

System Common

: Song Pos : Song Sel : Tune

System Real Time

: Clock : Commands

Aux X X X X X X X X

: Local ON/OFF : All notes OFF : Active Sense : Reset

Remarks

Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO

O : Yes X : No

This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Esta marca de reciclaje indica que el empaquetado conforma a la legislacin de proteccin ambiental en Alemania.
CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan
MA0603-A Printed in China LK100ES1A