Welcome

RD-700NX

Digit al Piano

Adding Additional Tones to a Live Set
You can layer new sounds into a live set by activating additional tones. Heres how: Select the desired live set. Press LAYER EDIT so it lights.
Congratulations on your purchase of the Roland RD-700NX. This TurboStart contains step-by-step instructions that will quickly introduce you to its major features.
Listening to the RD-700NXs Preset Live Sets
The RD-700NX contains 200 Preset live sets, and you can store up to 100 of your own. Use the following procedure to select a Preset live set on the RD-700NX. Press the desired PIANO, E. PIANO, or LIVE SET button to select a category. Use the INC and DEC buttons to choose live sets within the selected category.
Note: You can now see the live sets tones. To activate a tone thats not yet in use, press its UPPER 1 or 2 or LOWER 1 or 2 button so it lights. Press the 5 and 6 buttons to highlight the newly activated tone. To change the selected tone, press a PIANO, E. PIANO, or LIVE SET button to select the desired tone category. Use the INC/DEC buttons or the dial to choose a tone in the selected category.
Changing a Live Sets Tones
The sound of each live set is a result of the tones it plays. You can have two Upper tones and two Lower tones in a live set. The UPPER 1 and 2 and LOWER 1 and 2 buttons in the LAYER SWITCH/CONTROL area show you the tones that are active in the current live setif Upper 1 or 2, or Lower 1 or 2 is turned on, its button lights. Heres how to change these tones. 3 Press a PIANO, E. PIANO, or LIVE SET category button so it lights, and then choose the desired sound within that category. Press LAYER EDIT so it lights. Press the 6 button to highlight the desired tone onscreen.

Creating a Split

When youve got a live set that plays across the entire keyboard, you can divide, or split, the keyboard so that each hand plays a different tone or pair of tones as follows: Select the desired live set. Press SPLIT so it lightsthe live sets Upper tones now play starting at the G below Middle C, and the Lower tones play below that key.
Note: The RD-700NXs PIANO and E. PIANO sounds are based on SuperNATURAL technology and have a unique internal structure in which Upper 1 cant be selected or changed. Note: If you highlight a tone thats not already turned on, its UPPER 1 or 2 or LOWER 1 or 2 button flashes. If you want to activate the tone, press the flashing button so it lights. When LAYER EDIT is turned on, the PIANO, E. PIANO, and LIVE SET buttons act as shortcut buttons that select tone categories instead of live set categories. Press a PIANO, E. PIANO, or LIVE SET button to select the desired tone category. Use the INC/DEC buttons or the dial to choose a tone in the selected category.
Note: You can change the split point by holding down the SPLIT button and touching the lowest key that you want play the Upper tones. 3 Press LAYER EDIT so it lights.
Note: You can now see the live sets tones. To turn a tone on or off, press its UPPER 1 or 2 or LOWER 1 or 2 button to light or unlight it. Press the 5 and 6 buttons to highlight the various Upper and Lower tones and turn the dial to change the sound currently assigned to each as described earlier.
Note: You can also use these steps to change other tones in a live set.
2011 Roland Corporation U.S.

www.RolandUS.com

TBS276

Transposing the RD-700NX

Use the following procedure to transpose your RD-700NX. 3 Press and hold the TRANSPOSE button to display the TRANSPOSE menu. While continuing to hold the TRANSPOSE button, use the INC and DEC buttons to raise or lower the transposition amount in half-steps. Release the TRANSPOSE buttonit lights to indicate that the Transpose feature is turned on.

How to Save a Live Set

The RD-700NX has 100 live set memory locations in which you can save your favorite settings. Use the following procedure to save your current settings as a live set on the RD-700NX. 3 Press the WRITE button so it lights. Using the 3 and 4 buttons to select character positions and the INC/DEC buttons to select characters, enter the name you want to use for your new live set. Press the 6 button to highlight the number at the bottom of the display, and then turn the dial to select a live set memory location.
Note: Press the TRANSPOSE button again so its not lit to turn off transposition. The RD-700NX remembers the most recent Transpose value until you change it or until you turn off the RD-700NX. This allows you to quickly re-engage transposition by simply pressing the TRANSPOSE button again.
Note: The live set User memory locations contain demonstration live sets. Feel free to replace them with your own live sets. Press the flashing ENTER button to display Are You Sure? Press ENTER once more to display Executing. and to finish saving your live set.

Recording Audio

Use the following procedure to RECORD AUDIO on the RD-700NX. Insert a formatted USB memory stick in the USB slot. Press SELECT so it lights. Press the LAYER EDIT button to select the SONG menu in the display. Press the TONE EDIT button to enter Record Standby. Press the flashing PLAY/STOP button to begin recording. When youre finished recording, press the lighted PLAY/STOP button to stop the recording process. You can now name your recorded song by using the 3 and 4 buttons and the INC and DEC buttons. When youre finished naming your song, press the flashing ENTER button to save the song.
How to Load a Live Set Youve Saved
Use the following procedure to select a live set youve created and saved on the RD-700NX. Press the USER button in the BANK area so it lights. Use the INC and DEC buttons to select the desired live set.

How to Play a Rhythm

Use the following procedure to play a rhythm on the RD-700NX. 3 Press the SELECT button so it lights. Press the LAYER EDIT button to select the RHYTHM screen. Press the / button to start and stop the rhythm.
Note: To change the tempo, press 5 to highlight the tempo and press the INC/DEC buttons or turn the dial. Note: To select a different rhythm pattern, press 6 to highlight the rhythm name and press the INC/DEC buttons or turn the dial.