1/16/11 2/26/11

Mail-In D-Link Visa Prepaid Card Rebate Offer
To receive your D-Link Visa Prepaid Card by mail, please follow these four steps:
1) Purchase the Qualifying Products listed below during the Promotion Dates listed in the top left corner.
2) Remove the Original UPC Barcode from the Qualifying Product packaging. Copies of the UPC do not qualify.
3) Complete all information requested on this form accurately and legibly. 4) Mail the Original UPC Barcode, a copy of your receipt(s) or invoice(s) with purchase circled and this offer form to the address below. Rebate must be postmarked within 30 days from the purchase date.
Limit 5 units per Rebate Offer Form
D-Link Prepaid Card Offer Offer # DL120-0116022611-DCS930L P.O. Box 6809 Mesa, AZ 85216
(!) IMPORTANT: Photocopy your entire submission for your records. You could be required to mail these photocopies. Please check qualifying offer:

Check Here

Visa Prepaid Card Amount

Qualifying Product(s)

Qualifying UPC(s)

Model #

Qualifying Retailers Amazon.com, Newegg, Buy.com, Provantage, eCost, Zipzoomfly, ANTonline

$10 $20 $45 $60 $100

Buy 1 DCS-930L Buy 2 DCS-930L Buy 3 DCS-930L Buy 4 DCS-930L Buy 5 DCS-930L

790069 342691

DCS-930L DCS-930L DCS-930L DCS-930L DCS-930L
Complete this rebate request form and make a copy for your records. Please use a black or blue ballpoint pen. * Required Fields

Name* Address* City*

State* Email* Zip/Postal Code* Daytime Phone*
Please allow 8 -10 weeks for your rebate to arrive in the mail. You may contact 1-877-240-7146 or visit www.dlink.rebatepromotions.com if you have questions about your submission.
Terms and Conditions: Valid on purchase of specified product(s) only at the above mentioned D-Link resellers. Refurbished or Recertified products do not qualify. Rebate value will not exceed purchase price under any circumstances. Photocopies of the UPC will not be accepted. Manufacturer is not responsible for lost or misdirected mail. Rebate forms sent to D-Link or requests from groups, organizations, or P.O. Boxes will not be honored or acknowledged. Cannot be combined with any other offer or mail-in rebate. Valid while supplies last. Offer valid in the United States (including Alaska and Hawaii) and Puerto Rico only. Rebate paid via a D-Link Visa Prepaid Card, valid everywhere Visa is accepted. Please see the above image for an example of the Card. The Card is not redeemable for cash and may not be used for cash withdrawal at any cash-dispensing locations. The Card is not transferable and non-refundable. The D-Link Visa Prepaid Card is issued by MetaBank pursuant to license from Visa U.S.A. Inc. Card funds are available for 180 days in addition to any remaining days in the issuing month. The Valid Thru date on the front of the card denotes the exact date of expiration for your specific card(s). All Visa Prepaid Cards require an Activation step be performed by the recipient. Follow the simple steps detailed on the accompanying Card mailer to complete Activation. Please allow 8-10 weeks for processing. If you have not received your Card after 10 weeks, you may call 1-877-240-7146 or visit www.dlink.rebatepromotions.com. Requests with an invalid or undeliverable mailing address will be denied. Offer limited to end users only. Your rebate rights cannot be transferred, and this offer is void where taxed, restricted or prohibited by law. Disputes will require copies of all submitted material for verification. Warning: Fraudulent submission could result in federal prosecution under mail fraud statutes (Title 18, USC Sections 1341 & 1342).

Quick Installation Guideline
FTP Setup for D-Link DCS-910/ DCS-930 IP Camera

For Camera Login

1. Insert your D-Link CD and install the D-Link software from CD provided. 2. Go to `Start>All Programs>D-Link>Setup Wizard SE and run Setup Wizard SE.exe. Box below will pop out. a. Click `Search. b. Highlight the camera which you want to configure c. Click `Link.
3. Login to D-Link IP Camera using the default username `admin and password (blank).
File:/FiSnap_DLink_DCS-910&DCS-930

Page 1

For Network Setting
1. Under `Setup>Network Setup configuration, fill in the box a. Choose `Static IP. b. IP Address: (your current IP Camera IP Address). c. Subnet mask: 255.255.255.0 (default) d. Gateway: (your modem/router IP Address) e. DNS: 202.188.0.133 ( For Streamyx user only) f. To finish, click `Save Settings.

Page 2

For FTP Setting
1. Under `Setup>FTP, Fill in the following; a. Host Name: www.fisnap.com. b. Port: 21 (default). c. User Name: (Your Login ID for www.fisnap.com). d. Password: (Your Login Password for www.fisnap.com). e. Path: (/CameraNo/) via /Cam1/ or /Cam2/ or /Cam32/. f. Passive Mode, choose `No. g. Time Schedule option, you can choose always (24 x 7 x 365) or Schedule to your desire time. h. Image Frequency option can choose from per Frames/Second or per Seconds/Frame. i. Click `Test to sends test image to FTP server. j. To finish, click `Save Settings.

Page 3

For Motion Detection Setting
1. Under `Setup>Motion Detection option, choose the following; a. Motion Detection: Enable b. To finish, click `Save Settings.
2. Under `Setup>FTP option, choose the following; a. Time Schedule, choose `Enable uploading images to the FTP server. b. Choose `Motion Detection option. c. Click `Test to sends test image to FTP server. d. To finish, click `Save Settings.

Page 4

For Wireless Setup (For D-Link Model DCS-930 only)
1. Under `Setup>Wireless Setup option, choose the following; a. WIRELESS SETTINGS: Enable. b. Click `Site survey to look for Available Wireless Network. ( See Image 2) c. Type in your WEP/WPA/WPA2 network key. d. To finish, click `Save Settings. Image 1.

Image 2

Page 5