Reviews & Opinions
Independent and trusted. Read before buy Sony XL-2100!

Sony XL-2100

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page 

Download (English)
Sony XL-2100, size: 1.2 MB
Related manuals
Sony XL-2100 Annexe 5
Sony XL-2100U
Sony XL-2100 Annexe 1
Sony XL-2100U Annexe 1
Sony XL-2100 Annexe 2

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Sony XL-2100Sony XL-2100 - Projection TV replacement lamp

Weight: 10.9 oz

Sony's XL-2100 replacement lamp is designed to replace the original lamp of your Grand WEGA or XBR Grand WEGA rear-projection LCD television.

Here you can find all about Sony XL-2100, for example lamp and . You can also write a review.

 

[ Report abuse or wrong photo | Share your Sony XL-2100 photo ]

Video review

Sony XL 2100 Lamp Replacement Video Guide

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 8. Page 1 of 1. Average Rating:
kenmac999 12:47am on Wednesday, October 6th, 2010 
Wonderful blue tooth headphones for the price. Great sound quality, keeps sound out and very comfortable Last only about one year if used every day I have been using an Intuos 2 tablet for the ...  Spring loaded tip for digital designers looking to reduce hard clicks.
nickcardflinger 6:55pm on Monday, September 27th, 2010 
Amazing Simply put, this tablet is amazing. I went from using the Intuos2 to this tablet and I was blown away. Wacom Rocks I have had Wacom tablets for years. This product is great. The drivers are always the easiest to install.
abcgi 3:04am on Thursday, September 16th, 2010 
Intuos 2 pen The pen works fine. The only complaint I have is that the nib sometimes is too short. Great but... Amazon says that "This pressure-sensitive pen has the same feature set as the Cintiq Grip Pen.
masagin 1:10pm on Wednesday, August 11th, 2010 
This tablet is fantastic! I had a Bamboo and the Intous4 blows it away! This tablet is fantastic! I had a Bamboo and the Intous4 blows it away! Makes fine adjustments a snap. Upgraded from years of mousework and finally see what the big deal was! Good Control","Natural Feel
KurtKraut 1:37pm on Wednesday, July 28th, 2010 
This device its about....10=15% better in feel than a tablet. It will not solve your inability to make quality marks. I have worked on wacom tablets for 10+ years, worked in design for 13+, doing autonmotive and toy design.
Arnorld 10:21pm on Thursday, July 22nd, 2010 
I am a college student that is heavily into graphic and web design. This is my first pen tablet and I am positive I have made the right decision! This is my first Wacom. It is much nicer than my off-market tablet, and rightfully so, but I suppose I expected more luxury out of the price.
squirreltm 5:37am on Sunday, June 27th, 2010 
I love the pen pad the size takes abit of getting used as I used the extra large size at work for several years but the medium is the perfect size for...
heckler 7:18am on Wednesday, May 5th, 2010 
As posted in the weakness column they should change this stand a little so you can tilt this all the way up to 90 degrees so you can use it as a regul... As far as drawing digitally goes, this is by far the best thing out there. When compared to the 6x8 wacom tablet.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

Installation Water and Moisture
Do not use power-line operated sets near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

Power-Cord Protection

Do not allow anything to rest on or roll over the power cord, and do not place the set where the power cord is subject to wear or abuse.
Antennas Outdoor Antenna Grounding
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Accessories

Do not place the set on an unstable cart, stand, table or shelf. The set may fall, causing serious injury to a child or an adult and serious damage to the set. Use only a cart or stand recommended by the manufacturer for the specific model of LCD projection TV. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Ventilation

The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. Never cover the slots and openings with a cloth or other materials.
Antenna Grounding According to the NEC
Refer to section 54-300 of Canadian Electrical Code for Antenna Grounding.
When the set exhibits a distinct change in performance, it indicates a need for service.

Replacement Parts

When replacement parts are required, be sure the service technician certifies in writing that he has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards.
Antenna lead-in wire Ground clamp Antenna lead-in wire (NEC Section 810-20) Grounding conductors (NEC section 810-21) Ground clamps Power service grounding electrode system (NEC Art 250 Part H)
Electrical service equipment

Safety Check

Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition, and to so certify. When the set reaches the end of its useful life, ask a qualified service technician to dispose of the set.
NEC: National Electrical Code

Lightning

For added protection for this television receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the receiver due to lightning and power-line surges.
For Safety Be careful when moving the LCD projection TV
When you place the LCD projection TV in position, be careful not to drop it on your foot or fingers. Watch your footing while installing the LCD projection TV.
Service Damage Requiring Service
Do not attempt to service the set by yourself since opening the cabinet may expose you to dangerous voltage or other hazards. Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power cord or plug is damaged or frayed. If liquid has been spilled into the set. If the set has been exposed to rain or water. If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged. If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation.
Carry the LCD projection TV in the specified manner

Other Information

Programming the Remote Control..77 Using Other Equipment with Your LCD Projection TV Remote Control..79 Contacting Sony...82 Troubleshooting..82 Flashing Indicators on the Front of the Monitor.87 Specifications..88

Index...91

Using the Features
Using the Remote Control..49 Watching Digital TV..52 Using Favorite Channels..53
KF-42/50WE620 2-108-981-13 (1)
Presenting the Sony LCD Projection TV
Thank you for purchasing the Sony LCD projection TV. This manual is for models KF-42WE620 and KF-50WE620.

Features

Some of the features that you will enjoy with your new LCD projection TV include:
HD-Monitor: Enables the display of 1080i, 720p, 480p and 480i digital TV format signals. By using the HD/DVD IN jacks, you can connect a DTV (digital television) receiver to view DTV programs. DRC (Digital Reality Creation) Multifunction V1: Unlike conventional line doublers, the DRC feature converts frames reproduced every 1/60th of a second in real time, minimizing the blur or ghost of the motion images (for 480i signals only). CineMotion: Using the reverse 3-2 pull down technology, the CineMotion feature provides smoother picture movement when playing back movies or other video sources on film. Twin View: Using the Multi-Image Driver (MID-X), Twin View allows you to watch two programs side by side with the ability to zoom in on one picture and listen to the program in the selected window. You can watch pictures from two different sources (1080i, 720p, 480p or 480i) simultaneously. (Only the left Twin View window can display 1080i, 720p, and 480p sources). Parental Control: V-Chip technology allows parents to block unsuitable programming from younger viewers. Digital Visual Interface (DVI-HDTV): Supports a copy-protected digital connection (HDCP*) to other devices (such as digital TV receivers) that have compatible interfaces. The DVI-HDTV input terminal is compliant with the EIA-861 standard and is not intended for use with personal computers. Component Video Inputs: Offers the best video quality for DVD (480p, 480i) and digital TV receiver (1080i, 720p, 480p, 480i) connections.
High-bandwidth Digital Content Protection

(Continued)

Introducing the Sony LCD Projection TV
S-VIDEO Inputs: Provides a high-quality image from connected equipment. Favorite Channel Preview: Allows you to preview up to 16 favorite channels without leaving the current channel. Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in wide screen mode (16:9 aspect ratio). Auto Wide: Allows you to select the Wide Screen Mode automatically.

Using This Manual

We recommend that you carefully review the contents of the following three sections in the order shown to ensure that you fully understand the operation of your new LCD projection TV.
This section guides you through your initial setup. It shows you how to install your LCD projection TV, to connect your new components and to connect the antenna and cable.
This section shows you how to begin using your new LCD projection TV. It also shows you how to use your remote control functions.
This section teaches you how to access on-screen menus and adjust your LCD projection TV settings. Instructions in this manual are written for the remote control. Similar controls are also found on the LCD projection TV console.
Enjoying Your LCD Projection TV
Projection lamp Indicators

Screen

Indicators
The indicators show the current status of your LCD projection TV. If the LAMP indicator flashes, see Flashing Indicators on the Front of the Monitor on page 87.
To minimize screen reflection, its surface has a special coating. Read the instructions Cleaning the Screen Surface on page 14 carefully before cleaning. Inappropriate cleaning methods could damage the screens finish.

Projection lamp

Your LCD projection TV uses a projection lamp as its light source. Note the following:
After turning on your LCD projection TV, it may take a while before the picture appears (up to 1 minute). When the projection lamp wears out, the screen goes dark. Replace the lamp with a new Sony XL-2100U or XL-2100 replacement lamp (not supplied). otherwise, your LCD projection TV will not turn on. For details on lamp replacement, see Replacing the Lamp on page 15. TV is in use. To avoid eye discomfort or injury, do not look into the housing when the power is on.
After replacing the lamp, be sure to attach the lamp cover securely;
The light emitted from the lamp is quite bright when your LCD projection
Notes on the LCD Projection TV
To enjoy clear pictures Be sure not to allow sunlight or light from a lamp to shine directly onto

Keep your LCD projection TV at least 4 inches (10 cm) away from the wall to provide proper ventilation.

Recommended Viewing Area

Your viewing position may affect the picture quality. For the best picture quality, install your LCD projection TV within the areas shown below.
Model KF-42WE620 KF-50WE620 Viewing distance min. 5.9 ft. (approx. 1.8 m) min. 6.6 ft. (approx. 2.0 m)

Horizontal Viewing Area

min. 1.8 59
ft. m (a 60" p ft. m (a 50" prox. 2 6.0 ppr 6m ft.) 40" ox. 5.8 9m ft.)

min. 2.0 66

Vertical Viewing Area
60" ft. m (a ppr 50" ox. 2.min m) ft. 1.ft. m (a ppr 40" ox. 1.2 m) ft. min. 2.0 66
LCD Projection TV Connectors
LCD Projection TV Front Controls and Connectors

CHANNEL

VOLUME

TV/VIDEO

To open

(IR) Infrared Receiver

Receives IR signals from the remote control.
Push up to open the front panel.
Button 1 CHANNEL +/ 2 VOLUME +/ 3 TV/VIDEO
Description Press to scan through channels. Press to adjust the volume. Press to select the TV or other video equipment.
LCD Projection TV Rear Side Connectors
Rear of LCD projection TV
Front side of LCD projection TV

VIDEO 2 INPUT

S VIDEO

L(MONO)AUDIOR

Installing and Connecting the LCD Projection TV Connection Description
1 DVI-HDTV VIDEO Can accommodate a copy-protected digital connection AUDIO R/L (HDCP*) to other devices (such as digital TV receivers) that have compatible interfaces. The DVI-HDTV input (VIDEO 7 IN) terminal is compliant with the EIA-861 standard and is not intended for use with personal computers. See the instruction manual that came with your equipment for details about connecting and using it with the LCD projection TV. 2 S VIDEO (Rear and front) Connects to the S VIDEO OUT jack of your VCR or other S VIDEO-equipped video component. Provides better picture quality than the VHF/UHF jacks or the Video IN jack. Connects to the audio and video OUT jacks on your VCR or other video component. A fourth video input (VIDEO 2) is located on the front panel of the LCD projection TV.
3 VIDEO/ (L/R) AUDIO (Rear and front)
4 HD/DVD IN (1080i, Connects to your DVD players or digital TV receivers 720p, 480p, 480i) component video (Y, PB, PR) and audio (L/R) jacks. 5 AUDIO OUT (VAR/FIX) L/R 6 CONTROL S IN/OUT Connects to the left and right audio inputs of your audio or video component. To control other Sony equipment with the LCD projection TV's remote control, connect the CONTROL S IN jack of the equipment to the CONTROL S OUT jack on the LCD projection TV with the CONTROL S cable. To control the LCD projection TV with a remote control of another Sony product, connect the CONTROL S OUT jack of the equipment to the CONTROL S IN jack on the LCD projection TV with the CONTROL S cable. Allows you to view local and cable channels if your cable provider does not feature local channels. You can switch between local and cable channels easily by pressing ANT on the remote control. Devices connected to the AUX input cannot be viewed in the right picture of Twin View.

perform the Auto Program function (see page 67).

Cable Box Connections

Cable Box and Cable
This is the preferred basic cable TV hookup to use if:
Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box. You want to enjoy the Twin View feature. Use the LCD projection TV remote control to change channels on your cable box when the signal is scrambled. Use the LCD projection TV remote control to change channels on your LCD projection TV when the signal is not scrambled. (Your LCD projection TVs tuner provides a better signal than the cable box.) Use the Twin View feature. (When all channels are routed through your cable box, only one channel is sent to the LCD projection TV, so you cannot use the Twin View feature from your cable box.) Connect a coaxial cable from your cable service to the LCD projection TVs VHF/UHF jack. Using a coaxial cable, connect the LCD projection TVs TO CONVERTER jack to the cable boxs IN jack. The LCD projection TVs internal converter allows you to switch between unscrambled signals coming straight into the LCD projection TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.

With this setup you can:

Using a coaxial cable, connect the cable boxs OUT jack to the LCD projection TVs AUX jack.
Cable box IN OUT AUX Rear of LCD projection TV
75-ohm coaxial cable (not supplied)

TO CONVERTER Signal

CATV cable (unscrambled channels)

VHF/UHF

Pressing ANT on the remote control switches between the channels
coming in through the cable box (scrambled) and those coming directly to the LCD projection TV (unscrambled).
Installing and Connecting the LCD Projection TV Cable Box Only

Use this hookup if:

You subscribe to a cable TV system that uses scrambled or encoded signals requiring a cable box to view all channels. You do not intend to hook up any other audio or video equipment to your LCD projection TV.
When all channels are routed through your cable box, only one unscrambled channel is sent to the LCD projection TV, so you cannot use the Twin View feature. If some channels are scrambled, but others are not, consider using the hookup on page 30 instead.
Connect the coaxial cable from your cable service to the cable boxs IN jack. Using a coaxial cable, connect the cable boxs OUT jack to the LCD projection TVs VHF/UHF jack.
Cable Rear of LCD projection TV VHF/UHF

To view scrambled channels, set your LCD projection TV to AUX 2 - 6
(depending on your cable box output). Change channels using your cable box.
AUDIO-R (red) AUDIO-L (white) VIDEO (yellow) S VIDEO Coaxial cable
Coaxial cable A/V cable (not supplied) VIDEO (yellow) AUDIO-L (white) AUDIO-R (red)

Cable box

You will not be able to change channels on the VCR. Set your LCD
projection TV and VCR to channel 2 - 6, depending on your cable box channel output. coming in through the cable box (scrambled) and those coming directly to the LCD projection TV (unscrambled).
Connecting Two VCRs for Tape Editing
If you connect two VCRs, you can record from one VCR to the other while using your LCD projection TV to monitor what is being recorded.
Using A/V cables, connect the playback VCRs AUDIO/VIDEO OUT jacks to the recording VCRs AUDIO/VIDEO IN jacks. Using A/V cables, connect the recording VCRs AUDIO/VIDEO OUT jacks to the LCD projection TVs AUDIO/VIDEO IN jacks.

VCR (playback)

VCR (recording)
AUDIO-R (red) AUDIO-L (white) VIDEO (yellow)

A/V cable (not supplied)

To perform tape editing, set the LCD projection TV to the video input
intended for playback by pressing TV/VIDEO on the remote control. VCRs operating manual for instructions.
You may need to change the video input on your VCR. Consult your If your VCRs have S VIDEO jacks: For best picture quality, use an
S VIDEO connection instead of the yellow video cable on your combined A/V cable. Using an S VIDEO cable, connect the playback VCRs S VIDEO OUT jack to the recording VCRs S VIDEO IN jack. S VIDEO does not provide audio, so audio cables must be connected to provide sound. input.
You cannot record signals from equipment connected to the Y, PB, PR
Connecting a Satellite Receiver
Connect the satellite antenna cable to the satellite receivers SATELLITE IN jack. Using A/V and S VIDEO cables, connect the satellite receivers AUDIO/VIDEO and S VIDEO OUT jacks to the LCD projection TVs AUDIO/VIDEO and S VIDEO IN jacks. Connect a coaxial cable from your cable or antenna to the LCD projection TVs VHF/UHF jack. (yellow) instead of the S VIDEO cable.
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable

Using Twin View

Twin View enables you to watch two programs at the same time. You can also change the size of both the left and right pictures.

Activating Twin Pictures

To display twin pictures
Make sure your LCD projection TV is tuned to a working channel. Press.
To cancel twin pictures Press again (or press

Activating the Picture

Although two pictures appear on the screen at the same time, only one picture is active. Change the picture size by using the V or v button. For an active picture, you can:
Change channels. Adjust the volume. Switch the input sources from VHF/UHF to cable by pressing ANT or TV/VIDEO to switch the video input.
To activate the right picture Press b.
To activate the left picture Press B.
Using the Features Factors Affecting Twin View If you use a cable box to view all channels, the same channel appears in
both windows because the cable box unscrambles only one channel at a time, so the right picture will be the same as the left picture.
If you use a cable box and other video equipment connected, you can view the cable box output in one window and view a different source (such as a VCR or DVD player) in the second window by using the TV/ VIDEO button. Sources connected to the AUX, VIDEO 5, VIDEO 6, and VIDEO 7 inputs display in the left window, but not the right. If you are viewing a 4:3 source and a 16:9 enhanced source (such as a DVD) side by side, the 4:3 source appears larger. Twin View does not display channels that are blocked by parental settings (see page 69).
Changing the Picture Size
The zoom feature lets you change the size of the left and right pictures.
To enlarge the left picture (reduce the right) To enlarge the right picture (reduce the left)
Press B to activate the left picture (if not already activated). Press V to enlarge the picture and v to reduce the picture.
Press b to activate the right picture (if not already activated). Press V to enlarge the picture and v to reduce the picture.
When you adjust the twin screen sizes, the LCD projection TV memorizes
the change. The next time you use the Twin View function, the memorized sizes appear.
Using the Freeze Function
The Freeze function allows you to temporarily capture a programs picture. You can use this feature to write down information such as phone numbers, recipes, etc.

Mild Mode is unavailable when the Picture Mode is set

to Vivid.

Advanced Video

Program

DRC Mode Creates a high-resolution picture with 4x density, for high quality sources (i.e., DVD player, satellite receiver). High Density Recommended for moving pictures. Progressive Recommended for still images and text. CineMotion Provides an optimized display by automatically detecting film content and applying a reverse 3/2 pulldown process. Moving pictures will appear clearer and more natural-looking.
Using the Menus Option Advanced Video (Continued) Description Program DRC Palette Allows you to customize the level of detail (Reality) and smoothness (Clarity) for up to three input sources. For example, you can create one Custom setting to optimize your cable input's picture, and create another to optimize your DVD player's picture. You can switch among the three Custom settings.
Press the arrow buttons to highlight Custom 1, Custom 2, or Custom 3 and then press. The DRC palette appears.
Custom 1 [25] Reality Clarity [ 1]
Press the arrow buttons to adjust the position of the marker (z). As you move the z higher along the Reality axis, the picture becomes more detailed. As you move the z to the right along the Clarity axis, the picture becomes smoother.
Advanced Video is unavailable when you have selected
Mild Mode, or you are watching 1080i, 720p or 480p sources with Video 5 to 7 inputs.
To save the setting, press. To return the Custom options to the default factory settings, press the RESET button.
Your connected equipment may affect the ability of the
BN Smoother to correct the image quality.
BN Smoother (Block Noise Smoother) Select to reduce noise caused by the video encoding and decoding process. This is especially effective for watching a DVD or HDTV picture. Select from High, Medium, Low and Off.

Using the Audio Menu

To select the Audio menu
Press MENU. Press B or b to highlight the Audio icon and press. Use the arrow buttons to scroll through the options. Press to select an option. That options settings appear. Use the arrow buttons to scroll through the settings. Press to select the desired setting.
To restore the factory default settings for Treble, Bass and Balance Press RESET on the remote control when in the Audio menu.

Selecting Audio Options

The Audio menu includes the following options:
Option Treble Bass Balance Steady Sound Effect Description Adjust to increase or decrease higher-pitched sounds. Adjust to increase or decrease lower-pitched sounds. Adjust to emphasize left or right speaker balance. Auto Off TruSurround Simulated Off MTS Stereo Enjoy stereo, bilingual and Auto SAP mono programs Mono Select to stabilize the volume. Select to turn off Steady Sound. Select for surround sound (for stereo programs only). Adds a surround-like effect to mono programs. Normal stereo or mono reception. Select for stereo reception when viewing a program broadcast in stereo. Select to automatically switch the LCD projection TV to second audio programs when a signal is received. (If no SAP signal is present, the LCD projection TV remains in Stereo mode.) Select for mono reception. (Use to reduce noise during weak stereo broadcasts.)
Using the Menus Option Speaker Description On Off Select to turn on the LCD projection TV speakers. Select to turn off the LCD projection TV speakers and listen to the sound only through your external audio system speakers. The LCD projection TVs speakers are turned off, but the volume output from your audio system can still be controlled by the LCD projection TVs remote control. The LCD projection TVs speakers are turned off and the volume, bass and treble output of the LCD projection TV is fixed. Use your audio receivers volume control to adjust the volume through your audio system.
Audio Out Easy control of volume adjustments

Variable

Using the Screen Menu
To select the Screen menu

Selecting Screen Options

Press MENU. Press B or b to highlight the Screen icon and press. Use the arrow buttons to scroll through the features. Press to select a feature. That features options appear. Use the arrow buttons to scroll through the options. Press to select the desired option.
The Screen menu includes the following options:
z To change from one Wide Mode to another, use WIDE MODE on the remote control.
Option Wide Mode Select a screen mode to use for 4:3 sources.
Description Wide Zoom Select to enlarge the 4:3 picture, to fill the 16:9 screen, keeping the original image as much as possible. Select to return the 4:3 picture to normal mode. Select to enlarge the 4:3 picture horizontally only, to fill the wide screen. Select to enlarge the 4:3 picture horizontally and vertically to an equal aspect ratio that fills the wide screen.

Operating a 5.1ch DVD AV System (Sony DAV)
To Do This. Turn on/off Select other equipment connected to the DAV Skip a disk Display the DVD menu Display the menu (Setup) Move highlight (Cursor) Select item Change the volume
Press DVD/VCR (POWER) F1 F2 TOP MENU MENU VvBb VOL +/, MUTING
Operating a DVD/ VCR or HDD/DVD Combo Unit
To Do This. Turn on/off Select the DVD

Press DVD/VCR (POWER) F1

If you have a DVD/VCR combo component, Select the VCR F2 If you have a HDD/DVD combo component, Select the DVD Select the HDD Record Play Stop Fast forward Rewind the tape Pause Search the picture forward or backward Display the DVD menu Play Stop Pause Step through different tracks of the disc Step through different chapters of a video disc F1 F2 z and N simultaneously N x M m (VCR) (VCR) (VCR) (VCR) (VCR)
X (VCR) M or m during playback (VCR) (release to resume normal playback) TOP MENU N x X (DVD) (DVD) (DVD)
M to step forward or m to step (DVD) backward CH + to step forward or CH to step (DVD) backward

Operating an AV Receiver

To Do This. Turn on/off Change the volume
Press DVD/VCR (POWER) VOL +/, MUTING
If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (US residents only) or 1-877-899-SONY (7669) (Canadian residents only).

Troubleshooting

Twin View
Problem Possible Remedies If you are using a cable box to unscramble all channels (as shown on page 32), you cannot use the Twin View feature. This is because the cable box can unscramble only one channel at a time. You can use Twin View to view a signal from a different source that is connected to the LCD projection TVs AUDIO/VIDEO IN jacks (such as a VCR or DVD player) in the second window by pressing TV/VIDEO while in Twin View. Sources connected to the AUX, HD/DVD IN 5 and 6, DVI-HDTV IN 7 inputs will display only in the left Twin View window. Be sure the Twin View window is set to a video input or channel that has a signal airing. You might be tuned to a video input with nothing connected to it. Try cycling through the video inputs by pressing TV/VIDEO. Try cycling through the video inputs by pressing TV/VIDEO. Check that the Video Label option is not set to Skip. (See the Setup Menu on page 74.) Both Twin View windows might be set to the same channel. Try changing channels in either window. I cannot get Twin View to work There is no Twin View window, or it is just static Twin View cannot display anything but TV channels Twin View displays the same program in both windows

Remote Control

Problem Remote control does not operate Possible Remedies The batteries could be weak. Replace the batteries. Check the orientation of the batteries. (Batteries are installed correctly.) Press FUNCTION (DVD/VCR, SAT/CABLE or TV) to select the equipment that you want to operate. Press the TV button first for TV operation. Make sure this units power cord is connected securely to the wall outlet. Locate the unit at least 3-4 feet away from fluorescent lights. Remote control does not operate non-Sony video equipment If you are using the TV to change channels, first press the TV FUNCTION button. If you are using another device to change channels, be sure you have not inadvertently switched your TV from the channel 3 or 4 setting. Use the Channel Fix option to fix the channel based on the hookup you used (see page 67). If you are using another device to change channels, be sure to press FUNCTION (DVD/VCR, SAT/CABLE or TV) for that device. If you replaced the batteries to the remote recently, the code numbers for the video equipment may need to be reset. There may be more than one code for the equipment that you are attempting to operate. There is a possibility that some non-Sony equipment cannot be operated by your Sony TV remote.You may need to use the equipments original remote control.
Cannot change channels with the remote control
Problem No picture (screen not lit), no sound Possible Remedies If your LCD projection TV does not turn on, and a red light keeps flashing, your LCD projection TV may need service. Call your local Sony Service Center. Make sure the power cord is plugged in. Press POWER/STANDBY on the front panel of the LCD projection TV. Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV, and when watching connected equipment, set to VIDEO 1, 2, 3, 4, 5, 6 or 7. The Parental Control feature is activated (see Using the Parent Menu on page 69). If your LCD projection TVs power is on, and the LAMP (red) indication is flashing, the lamp for the light source has burnt out. Replace it with new Sony XL-2100U or XL-2100 replacement lamp (see page 15). Try another channel; it could be station trouble.
Other Information Problem Dark, poor or no picture (screen lit), good sound Possible Remedies Adjust the Picture option in the Video menu (see page 61). Adjust the Brightness option in the Video menu (see page 61). Check the antenna/cable connections. For optimum picture quality, a 75-ohm coaxial antenna connection is highly recommended. Radio waves and other interference can easily affect a 300-ohm twin lead cable, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep as far away as possible from the LCD projection TV. Do not use an indoor antenna; they are especially susceptible to radio noise (see page 29). Adjust the Color option in the Video menu (see page 61). Check the antenna/cable connections. Check the Cable setting in the Channel menu (see Cable on page 67). Make sure the channel is broadcasting programs. Press ANT to change the input mode (see page 51). Adjust the antenna. Move the LCD projection TV away from noise sources such as cars, neon signs, or hair-dryers. Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings). Set the Image Shift to an appropriate value. The default setting is Auto. If doubled images appear with Auto, select the best value from 1 to 4 (see page 76). You have selected a text option in the Setup menu and no text is available. See page 73 to reset Setup selections. To turn off this feature, set the Caption Vision option to Off. If you were trying to select closed captioning, select CC1 instead of Text 1-4. Some wide-screen programs are filmed in aspect ratios that are greater than 16:9 (this is especially common with theatrical releases). Your LCD projection TV will show these programs with black bands at the top and bottom of the screen. For more details, check the documentation that came with your DVD (or contact your program provider). The compression used by certain digital broadcasts and DVDs may cause your TVs screen to display less detail than usual, or cause artifacts (small blocks or dots, pixelations) to appear on your screen. This is due to your TVs large screen and ability to show very fine detail, and is normal for certain digitally recorded programs. Adjust the reality/clarity in the Video menu DRC Palette (see page 62) to optimize the picture while viewing these sources. Ensure that Video Label is not set to Skip (see Video Lable on page 74).

Cannot receive or select channels Cannot receive digital channels (when a digital TV receiver is connected)

General

Problem How to restore Video settings to factory settings How to restore Audio settings to factory settings Cannot cycle through the other video equipment connected to the TV Cannot operate Menu Lost password Possible Remedies Press RESET on the remote control while in the Video menu (see page 60). Press RESET on the remote control while in the Audio menu (see page 63). Be sure the Video Label option is not set to Skip (see page 74).
LED on the display unit is lit
If a menu option appears in gray, this indicates that the menu option is not available. In the password screen (see page 69), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. The POWER/STANDBY indicator lights up when the TV is turned on. If the LED blinks continuously, this may indicate the TV needs service. The TIMER indicates that the timer is set. When the timer is set, this LED will remain lit even when the LCD projection TV is turned off. Use Auto Program in the Channel menu to add receivable channels that are not presently in the TVs memory (see page 67). Check your Channel Fix settings (see page 67). The screw of the lamp cover may be slanted. Take out the screw, reinsert it straight into the screw hole, and then tighten it completely (see page 18). When the TV is in use, there is a natural rise in temperature, causing the cabinet to expand or contract and may be accompanied by a slight creaking noise. This is not a malfunction.
LCD projection TV is fixed to one channel The replacement lamp does not light up TV cabinet creaks
Flashing Indicators on the Front of the Monitor

KF-42WE620

POWER/STANDBY TIMER

KF-50WE620

LAMP LAMP
The POWER/STANDBY (red) and/or LAMP (red) indicators show the conditions of the LCD projection TV and warnings by lighting or flashing, as follows.
The POWER/STANDBY indicator flashes. The lamp for the light source is ready to turn on. The POWER/STANDBY indicator flashes three times. The lamp cover is not attached securely. When corrected, the POWER/
STANDBY indicator goes out and the LCD projection TV enters standby mode (see page 18).
The LAMP indicator flashes. The lamp for the light source has burned out.
Replace it with a new one (see page 15). If the LCD projection TV does not function properly after correcting the problems, contact qualified Sony personnel.

Specifications

 

Technical specifications

General
Product TypeProjection TV replacement lamp
Package ContentAllen wrench
Width3.6 in
Depth3.9 in
Height3.8 in
Weight10.9 oz
Universal Product Identifiers
BrandSony
Part NumberXL2100
GTIN00027242627987

 

Tags

F40 FD WF7700NAW BJC-2000 Motorized URC288L Rc8 DSR-PD175P VS4221 IC-M1V Xxx 6 880SH DSC-W170 ALL-IN-ONE XR200 PRO BTE 1622FX Sunfire 1997 RM-V8A PRS-505-LC Presario A900 Eheim 2215 J-355 CLX-3175 XEV WJ-HD309 28PW5324-01 Dslr-A230L Series IMX644 KX-TG8012FX Galeo 1500 Roland RC-3 T35600 KDL-40W4710 E1150 BGW 320B DSC-H50 B 2 Gold CC-7000 Series FAV40850 RM-AX1400 NC6230 CFD-S35CP SC260 Novo 964 D-NE900 Processor WD7652C8W 35 ST CK7360 Grill WD-80100TP 7415 EV1 Motorola 3300 EMP-7700 Kawai CL30 Aspire 5710 Siemens EF81 42PC5DH-UL 9050MFP CT-500VII W3430 L192WS-BN Soleil SGH-X600 IC-V80 WLA2-G54C S23 M796 DSC-W270 HMX-H100P 81060 Magnia 3200 Roboreptile Vista M12 M7NCG 400 Camedia E-10 CR-535 560 WX BC146 Controller SHP 2076 LAV75520-W Stylus C65 JBL PB12 EW1277F VT 6032 GSA-H10A KV-21DS1 BDP-V6000 - 2001 LE37B550 IFP-800 EMX2300 Denver CD70 47PFL5603D TH-50PZ80A VLF5125 69NT40-531 Calculator QRX-4500 LST-4100P

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101