3M Speedglas 9100 Welding Shield

The difference

is clear
challenge of welders worldwide

We meet the

Welders tell us whats best
In 1981 we turned the world of welding on its head by introducing the first comercially-viable auto-darkening welding filter. Ever since then the Speedglas brand and the technology behind it has been the standard to which others aspire.
Continually inspired by welders
For almost three decades now, we have worked closely with welders, safety engineers and ergonomic specialists to constantly improve the performance and comfort of our products. And weve persistently collected user insights and comments from around the world to inspire us to create this, our next generation of welding protection. Our Voice of Customer studies revealed the following user priorities:

Coverage is key.

We made the new shield deeper and wider, providing greater coverage of ears, neck and sides of the head.
The shield must be comfortable to wear.
Weve totally changed the interface between the welders head and the shields suspension system, eliminating pressure points, optimizing its centre of gravity, and adding multiple adjustment options.
The welding shield must be reliable.
The 3M Speedglas 9100 Welding Shield and auto-darkening filters are based on more than 25 years of expertise in developing and producing extraordinarily reliable and durable equipment for highly-discriminating professional welders.
Our sincere thanks to the professional welders that contributed their thoughts and experiences to the development of the Speedglas 9100 shield - we hope you will enjoy the results!
Fits just the way I want it to
The comfort of the 3M Speedglas 9100 Welding Shield is the result of extensive research and development processes. We consulted with international experts in ergonomics and anatomy to ensure that we would produce the most comfortable and protective welding shield ever.
This changes how I experience welding
Professional welders marvel at the stability and balance of the shield in all positions - up, down or anywhere in between, the new pivot location keeps leveraged forces to a minimum. With our new head suspension we avoid pressure on vulnerable nerves, arteries and acupressure points; areas that might cause pain or discomfort if they are put under pressure for a period of time.

So many more options!

Welders are delighted to see all the welding filter options: A grinding shade 3. Gas welding shade 5. Micro-plasma welding shade 8. Arc welding shades 9 through 13. Sensitivity settings for normal welding to low-amp inverter TIG welding, and even low-sensitivity setting for when other welders are working nearby. More versatility, greater optimisation and more user satisfaction.
The new head suspension system provides for several adjustment combinations, so the welder can fit the shield to his personal preferences and comfort settings.
Designed for ultimate protection
Safety is our ultimate goal; all features must inevitably enhance the users protection. Even our improved comfort designs are ultimately rooted in safety: a shield can only work when the user wants to continually wear it. By enhancing the shields performance at all levels, we have made the most appealing - and compelling - professional welding shield within our range.
Great tools let you concentrate
Precision welding is demanding, but with the 3M Speedglas 9100 Welding Shield you can fully concentrate in safety and comfort. Protecting your eyes and face from radiation, heat and sparks while providing an accurate view of your work area, your Speedglas 9100 shield might soon be considered your most important welding tool.

SideWindows: Exclusive, shade 5 filters that widen your field of vision. SideWindows enable you to be more aware of nearby moving machinery, tools and other peripheral hazards. The shield is available with or without SideWindows. Welders can also use removable cover plates for when peripheral vision is found to be distracting.
Increased coverage for ears and side of neck.
The shield is made from a lightweight, but durable material that meets the mechanical strength requirements of EN 175 level B.
An auto-darkening welding filter with superior optical performance enables constant, comfortable vision. Ultraviolet (UV) and infrared (IR) radiation protection at all times, in all states.
Heat reflecting silver front.
Increased coverage for lower neck from heat and welding sparks. Also available: flame-resistant Tecaweld protector for extended neck and ear coverage.
A head suspension that shapes to your head
The outside of the human head is lined with nerves, arteries, and acupressure points. Applying pressure to some of these points can make a person feel fatigued.
Working with Western and Chinese medical experts, we mapped out the vulnerable areas of the head and avoided them with our new head suspension design. Then, we created a design that better cradles the head. As a result, you do not need to tighten the headband as much as conventional ones to hold the shield firmly on your head.
Less pressure, more comfort
Less pressure on your head means improved comfort that lasts all day long and the more comfortable you are in your protective gear, the more you want to keep it in position, providing you with more continuous eye and face protection from workplace hazards.
The front of the headband self-adjusts to match your forehead. Pressure is evenly distributed to sets of twin pads to fit the exact shape of your head. Two crown straps gently saddle the top of the head for increased shield stability and better weight distribution. Both straps are adjustable to fit virtually all head shapes and sizes.
The back portion of the headband is self-adjusting and swivels to fit different head shapes. When wearing a cap backwards you simply turn the back portion upside-down.
Four settings let you determine the distance between your face and the shield. This allows you to keep the shield as close as possible to your face for a greater view and reduces the load on your neck muscles.
Small, Medium or Large? You can adjust the width of the head suspension to your own head size from 50cm to 64cm.
The headband can also be manually tightened to your personal preference. The smooth ratchet mechanism allows for precise tightening control.

Weve lowered the centre of gravity to be just above your ears! This makes the shield more stable in both the up and down positions, as well as reducing the leveraged strain on your neck. Large, rubber, overmoulded knobs make it easy to adjust the up-anddown pivot action, even when wearing gloves.
A snap adjustment allows you to set the shield at 9 different angles.
Reducing the possibility of neck strain
Feedback from professional welders led us to research ways to further reduce the possibility of neck strain. Our answer was: reduce the static and dynamic loads on the neck. From a shield design standpoint, that means keeping the shield as close as possible to the head. By lowering the pivot point to just above your ears, the shield stays as close as possible to the top of your head when in the up position. In essence, weve shortened the length of the lever to help reduce forces on your neck muscles.
Improved shield angle adjustment and pivot action
For optimum vision and comfort the viewing angle through the welding filter can be adjusted without losing the close-to-face fit of the shield. You can now adjust the shield angle while wearing the shield. This helps when handling work pieces at different heights. The shield also has a smoother up-and-down pivot action that gently locks in the up position - a light pull lowers the shield.
The lowered centre of gravity makes the shield feel more balanced and stable in all positions - up, down, or anywhere in between. Because the shield is more balanced, you do not need to tighten the headband as much, further increasing your wearing comfort!
Keeps you cool and fog-free
Very often welders who keep their shield in the down position for prolonged periods of time complain of discomfort from stale air and reduced vision from fogging inside the shield.

An innovative design

We have improved our design to direct exhaled air out of the shield more efficiently with reduced fogging of the welding filter as an effect. It can also reduce the build-up of heat, moisture, carbon dioxide (CO2) and stale air within the shield. Welders report feeling more refreshed, energetic and clear-headed all day long.
A unique ventilation solution: exhaust vents direct your exhaled air out of the shield more effectively.
The inside protection plate now slides in from the side to give a tighter fit that helps to lock out fogproducing moisture.
The exhaled air is channelled out via the side exhaust vents.
The new inside cover plates quickly attach or detach over the SideWindows (from the inside of the shield) for either focused or full-viewing. There is also a shield option available without SideWindows.

The design of the exhaust vents reduces the likelihood of fogging of the welding filter.
The shield design is compatible with most 3M Maintenance-Free Respirators that provide protection against hazardous welding particles.
Better optics, bigger views
The 3M Speedglas 9100 Welding Filters continue our tradition of outstanding optical quality, including extremely uniform shading and minimal distortion across the entire filter viewing area.

No compromises needed

By selecting just the right setting for each task, the welder reduces eye strain and improves the quality of every weld. Pick your viewing size: the Speedglas 9100 series welding filter features three models normal, large and extra-large. The extra large Speedglas 9100XX filter is 30% larger than any other Speedglas filter! The shield option with SideWindows increases your vision even further, enabling you to be more aware of peripheral hazards. All of these options are about user comfort, personal preference, and optimum performance for each specific application.
More options mean more control for the welder
There are seven dark shade settings to choose from: shade 5 for gas welding/cutting and shade 8 for micro-plasma and low amp TIG welding as well as variable dark shades of 9 to 13. If needed, you now also have the option to lock-in your shade, including the light state (shade 3) for grinding. A comfort mode for tack welding helps to reduce eye fatigue resulting from the eye constantly adjusting to differing light levels.
The Speedglas 9100 series includes three new auto-darkening filter models that are differentiated by size: the viewing area of the extra large Speedglas 9100XX filter is 73x107mm, making it 30% larger than any other Speedglas welding filter! The welding filter has new holders for the magnifying lens making correct fitting easier. The tack welding comfort mode uses an intermediate light state (shade 5). If a follow-up arc is not struck within two seconds, the welding filter switches to the normal light state (shade 3). This may help reduce eye fatigue resulting from the eye constantly needing to adjust to differing light levels during tack welding.
Seven user selectable dark shades: shade 5 for gas welding/cutting, shade 8 for microplasma and low amp TIG welding and shades 9 to 13 for most other types of arc welding.
The delay function allows the user to set the dark-to-light switching time.
Conforms to European Standard EN379 for eye protection for welders.
Sensitivity of arc detection can be adjusted to provide reliable switching for a wide range of arc welding processes, amperages and situations. And you can now lock-in any shade: the light shade for grinding or other non-welding activities, or one of the dark shades to have it function as a passive welding filter.

If versatility is what you want from a welding shield, then the 3M Speedglas 9100 Welding Shield is the one for you. It is designed to work in most welding situations and applications.
Technical Data/ Ordering Information
3M Speedglas 9100V Filter
3M Speedglas 9100X Filter
3M Speedglas 9100XX Filter
Approvals Eye protection Classification Switching time, light-dark Delay (Switching time dark-light) UV / IR protection Viewing area Light state Dark state Fail-safe state Solar cell Battery lifetime Ordering information 3M Speedglas 9100 Welding Shield, including welding filter
Conforms to EN 379 1/1/1/2 0,1 ms (+23C) User-adjustable 40 - 1300ms Shade 13 (permanent) 45 x 93mm Shade 3 Shade 5, 8, 9-13 (variable) Shade 5 Yes hours Part No 05 (without SideWindows) 05 (with SideWindows)
Conforms to EN 379 1/1/1/2 0,1 ms (+23C) User-adjustable 40 - 1300ms Shade 13 (permanent) 54 x 107mm Shade 3 Shade 5, 8, 9-13 (variable) Shade 5 Yes hours Part No 15 (without SideWindows) 15 (with SideWindows)
Conforms to EN 379 1/1/1/2 0,1 ms (+23C) User-adjustable 40 - 1300ms Shade 13 (permanent) 73 x 107mm Shade 3 Shade 5, 8, 9-13 (variable) Shade 5 No hours Part No 25 (without SideWindows) 25 (with SideWindows)
Accessories for increased comfort and protection

Magnifying lens

New holder provides a more precise lens attachment on the inside surface of the filter.

Neck protection

Neck protection made from flame-resistant Tecaweld , helps protect from molten metal, sparks and flames. Completely new construction that does not interfere with your eyes when wearing the shield in the up position

Head protection

Extended head coverage made from flame-resistant Tecaweld (a blend of 75% cotton and 25% Kevlar fibres). Simply fasten it on the shield to protect your head from sparks, flames and UV/IR radiation.

Part No. 10

Part No. 05
Kevlar is a trademark of Dupont. TecaWeld is a trademark of TenCate.
Suggested models of respirators
3M 4000 Series Respirator

Description

The 3M 4000 series are a range of ready-to-use, maintenance-free half masks designed for effective and comfortable protection against a combination of many gases, vapours and particulates.

Approval

EN 405:2001

Part No.

4251 - FFA1P2D 4255 - FFA2P3D 4277 - FFABE1P3D 4279 - FFABEK1P3D 7501 - small 7502 - medium 7503 - large

3M 7500 Series Half Mask

The 3M 7500 series half mask has set a new standard in introducing the highest levels of comfort to half mask respirators. With the 3M 2000 series particle filters, the 7500 half mask fits comfortably inside the Speedglas 9100 shield. The 3M 2128 and 2138 series filters offer particulate protection and additional nuisance level protection against organic vapours and acid gases. Both filters fit the 3M 7500 series half masks.

EN140:1998

3M 2128 and 2138 Series Particle Filters
EN143:2000 P2 R EN143:2000 P3 R EN149:2001 FFP2

2128 2138

3M 9925 or 9928 Particle Respirator
Maintenance-Free Particulate Respirator for protection against fine dust, oil and water-based mists, metal fume and ozone. The 3M Cool-Flow Valve reduces heat build up to offer comfortable protection, particularly in hot and humid environments.

9925 9928

3M 9922 Speciality Respirator
The 3M 9922 Particulate Respirator offers relief against fine dusts, oil and water-based mists and nuisance levels of organic vapours from solvents, degreasers and resins. It also provides protection against respiratory hazards during welding such as welding fume and ozone gas.

EN149:2001 FFP2

The 3M Speedglas 9100 Welding Shield design is compatible with most 3M maintenance-free respirators that provide protecton against hazardous welding particles. The products selected above are those that typicaly fit well inside the shield. They are well suited for the airborne hazards often found when welding. Contact the 3M Health and Safety Helpline on (UK) or (Ireland) for further advice.
3M Welding 3M United Kingdom plc
3M Centre Cain Road, Bracknell Berkshire RG12 8HT Tel: 6104 www.3M.com/uk/ohes

3M Welding 3M Ireland

3M House, Adelphi Centre Upper Georges St. Dun Laoghaire Co. Dublin, Ireland Tel: 500
Please recycle. Printed in the United Kingdom. 3M 2008. All rights reserved. CH9100 ISS.2

3M Speedglas 9100 Welding Shield
Optimum Comfort, Trusted Protection
Welders tell us whats optimum
In 1981 we turned the world of welding on its head by introducing the first commercially-viable auto-darkening welding lens. Ever since then the Speedglas brand and the technology behind it has been the standard to which others aspire.
Continually inspired by welders
For almost three decades now, we have worked closely with welders, safety engineers and ergonomic specialists to constantly improve the performance and comfort of our products. And weve persistently collected user insights and comments from around the world to inspire us to create this, our next generation of welding protection. Our Voice of Customer studies revealed the following user priorities: Coverage is key. We made the new shield deeper and wider, providing greater coverage of ears, neck and sides of the head. The shield must be comfortable to wear. Weve totally changed the interface between the welders head and the shields head harness system, eliminating pressure points, optimising its centre of gravity, and adding multiple adjustment options. The welding shield must be reliable. The Speedglas 9100 shield and auto-darkening lenses are based on more than 25 years of expertise in developing and producing extraordinarily reliable and durable equipment for professional welders. Our sincere thanks to the professional welders that contributed their thoughts and experiences to the development of the Speedglas 9100 shield we hope you will enjoy the results!
We meet the challenge of welders worldwide
Safety is our ultimate directive; all features must inevitably enhance the users protection. Even our improved comfort features are designed with safety in mind. By enhancing the shields performance at all levels, we have made the ultimate professional welding shield.
Designed for ultimate protection
Great tools let you concentrate
Precision welding is demanding, but with the Speedglas 9100 shield you can concentrate in safety and in comfort. Protecting your eyes and face from radiation, heat, and sparks - while providing an accurate view of your work area your Speedglas 9100 shield will soon be considered your most important welding tool.
The shield is made from a lightweight, but incredibly durable material that has a high impact rating and meets standard AS/NZS 1337.
An auto-darkening welding lens with superior optical performance enabling constant, comfortable vision. Ultraviolet (UV) and infrared (IR) radiation protection at all times, in all states.
Increased coverage for ear and side of neck.
Heat reflecting silver front.
SideWindows: Increase your peripheral vision by 100%. Exclusive, patented shade 5 lenses that widen your field of vision. SideWindows enable you to be more aware of nearby moving machinery, tools and other peripheral hazards. Increased coverage from heat and welding sparks for the lower neck. Also available: flame-resistant Tecaweld protector for extended head coverage. See page 9 and 10 for more details. The shield is available with or without SideWindows; welders can also use removable cover plates for when peripheral vision would be distracting.
A head harness that shapes to your head
The outside of the human head is lined with nerves, arteries, and acupressure points. Applying pressure to some of these spots actually makes a person feel fatigued. Working with Western and Chinese medical experts, we mapped out the vulnerable areas of the head and avoided them with our new head harness design. The harness system design self-adjusts to fit the welders head. As a result, you do not need to tighten the head harness as much as you do on conventional head harnesses.
Less pressure, more comfort
Less pressure on your head means improved comfort that lasts all day long. And the more comfortable you are in your protective gear, the more you want to keep it in position, providing you more continuous eye and face protection from workplace hazards. The revolutionary pivot point keeps the shield as close as possible to the head, reducing the static and dynamic loads on the neck.
Two crown straps gently saddle the top of the head for increased shield stability and better weight distribution. Both straps are adjustable to fit virtually all head shapes and sizes.
The front of the head harness selfadjusts to match your forehead. Pressure is evenly distributed to sets of twin pads to fit the exact shape of your head.

The back portion of the head harness is self-adjusting and swivels to fit different head shapes. When wearing a cap backwards you simply turn the back portion upside down.
Four settings let you determine the distance between your face and the shield. This allows you to keep the shield as close as possible to your face for an enhanced view and a reduced load on your neck muscles.
The head harness can also be manually tightened to your personal preference. The smooth ratchet mechanism allows for precise tightening control.
Small, Medium or Large? You can adjust the width of the head harness to your own head size from size 50 to 64 cm.
A snap adjustment allows you to set the shield at 9 different angles.
Weve lowered the centre of gravity to be just above your ears! This makes the shield more stable in both the up and down positions, as well as reducing the leveraged strain on your neck. Large, rubber, overmolded knobs make it easy to select the settings for the up-and-down pivot action, even when wearing gloves.
Welders who keep their shield in the down position for prolonged periods of time complain of discomfort from stale air and reduced vision from humidity fogging up the lens inside the shield.
Keeps you cool and fog-free
more efficiently direct exhaled air out of the shield with reduced fogging of the welding lens as an effect. It can also reduce the build-up of heat, moisture, carbon dioxide (CO2) and stale air within the shield. Welders report feeling more refreshed, energetic and clear-headed all day long.

A patented design

We have improved our patented breathability design to
A patented ventilation solution: exhaust vents direct your exhaled air out of the shield more effectively.
The inside protection plate now slides in from the side to achieve a tighter fit that helps to lock out fog-producing moisture.
The exhaled air is channelled out via the side exhaust vents.
The new inside cover plates quickly attach or detach over the SideWindows (from the inside of the shield) for either focused or full-viewing. There is also a shield option available without SideWindows lenses.
The design of the exhaust vents reduces the likelihood of a foggy welding lens.
The shield design is compatible with most disposable respirators that provide protection against hazardous welding particles.
Increase your viewing area by 85%*
* Speedglas 9100XX lens is 85% larger than the standard Speedglas 9100V lens (45x93 mm)
Better optics, bigger views
The Speedglas 9100 welding lenses continue our tradition of outstanding optical quality, including extremely uniform shading and minimal distortion across the entire lens viewing area.

No compromises needed

By selecting just the right setting for each task, the welder reduces eye strain and improves the quality of every weld. Pick your viewing size: the Speedglas 9100 series welding lenses features three models normal, large and extra-large. The extra large Speedglas 9100XX lens (73x107 mm) is 85% larger than any other standard sized lens (Speedglas 9100V = 45x93 mm). The shield option with SideWindows increases your vision even further, enabling you to be more aware of peripheral hazards. All of these options are about user comfort, personal preference, and optimum performance for each specific application.
More options mean more viewer control
There are seven dark shade settings to choose from: shade 5 for gas welding/cutting and shade 8 for micro-plasma and low amp TIG welding as well as variable dark shades of 9 to 13. If needed, you now also have the option to lock-in your shade, including the light state (shade 3) for grinding. A patented comfort mode for tack welding helps to reduce eye fatigue resulting from the eye constantly adjusting to differing light levels.
Magnification made easy. The welding lens design now features a built in magnifying lens holder, meaning that attaching the lens is easier and the fit is more accurate.
The Speedglas 9100 series includes three new auto-darkening lens models that are differentiated by size: the viewing area of the extra large Speedglas 9100XX lens is 73x107 mm, making it 30% larger than any other Speedglas welding lens!
Seven user selectable dark shades: shade 5 for gas welding/ cutting, shade 8 for microplasma and low amp TIG welding and shade 9 to 13 for most other types of arc welding.
The tack welding comfort mode uses an intermediate light state (shade 5). If a follow-up arc is not struck within two seconds, the welding lens switches to the normal light state (shade 3). The comfort mode helps reduce eye fatigue resulting from the eye constantly needing to adjust to differing light levels during tack welding.

The delay function allows the user to set the dark-to-light switching time. Conforms to Australian Standards AS/NZS1337 and AS/NZS1338.1 for eye protection for welders.
Sensitivity of arc detection can be adjusted to provide reliable switching for a wide range of arc welding processes, amperages and situations. And you now can lock-in any shade: the light shade for grinding or other non-welding activities, or one of the dark shades to have it function as a passive welding lens.
Accessories for extra comfort and protection
Magnifying lens New holder provides a more precise lens attachment on the inside surface of the lens. Part No: 20 Magnifying lens 1.0X 21 Magnifying lens 1.5X 22 Magnifying lens 2.0X 23 Magnifying lens 2.5X
Head protection Neck protection Neck protection made from flame-resistant Tecaweld, helps protect from molten metal, sparks and flames. Completely new construction that does not interfere with your eyes when wearing the shield in the up position. Part No: 10
TecaWeld is a trademark of TenCate. Kevlar is a trademark of Dupont.
Extended head coverage made from flame-resistant Tecaweld (a blend of 75% cotton and 25% Kevlar fibres). Simply fasten it on the shield to protect your head from sparks, flames and UV/IR radiation. Part No: 05
Technical Data/ Ordering Information

3M Speedglas 9100V

3M Speedglas 9100X

3M Speedglas 9100XX

Approvals Eye protection Classification* Switching time, light-dark Delay (Switching time dark-light) UV / IR protection Viewing area Light state Dark state Fail / Safe state Solar cell Battery lifetime Ordering information
3M Speedglas 9100 Welding Shield, including welding lens
Conforms to AS/NZS 1337 & 1338.1 1/1/1 0,1 ms (+23C) User-adjustable ms Shade 13 (permanent) 45 x 93 mm Shade 3 Shade 5, 8, (variable) Shade 5 Yes hours Part No 05 (without SideWindows) 05 (with SideWindows)
Conforms to AS/NZS 1337 & 1338.1 1/1/1 0,1 ms (+23C) User-adjustable ms Shade 13 (permanent) 54 x 107 mm Shade 3 Shade 5, 8, (variable) Shade 5 Yes hours Part No 15 (without SideWindows) 15 (with SideWindows)
Conforms to AS/NZS 1337 & 1338.1 1/1/1 0,1 ms (+23C) User-adjustable ms Shade 13 (permanent) 73 x 107 mm Shade 3 Shade 5, 8, (variable) Shade 5 No hours Part No 25 (without SideWindows) 25 (with SideWindows)

* European standard classification EN379: Optical class / Diffusion of light class / Variation of luminous transmittance class.

In a class of its own

Spare Parts & Accessories

10 20-90

Part no

Description

15 Speedglas 9100 sweatband (pk=3) 05 Speedglas 9100 head protection, black TecaWeld 10 Speedglas 9100 neck protection, black TecaWeld 00 Head cape, black/grey TecaWeld 20 Magnifying Lens 1.Magnifying Lens 1.Magnifying Lens 2.Magnifying Lens 2.Battery (pk=2) 05 Speedglas 9100V auto darkening welding lens 5, 8/9-Speedglas 9100X auto darkening welding lens 5, 8/9-13
25 Speedglas 9100XX auto darkening welding lens 5, 8/9-Speedglas 9100 shield without head harness 90 Speedglas 9100 SW shield without head harness 00 Speedglas 9100 outer protection plate standard 147C (pk=10) 00 Speedglas 9100 outer protection plate hard coated 147C (pk=10) 70 Speedglas 9100 outer protection plate heat 202C (pk=10) 05 Speedglas 9100V inner protection plate (pk=5) marked, 117x50 mm 15 Speedglas 9100X inner protection plate (pk=5) marked, 117x61 mm
25 Speedglas 9100XX inner protection plate (pk=5) marked, 117x77 mm 00 Speedglas 9100 battery holder (pk=2) 00 Speedglas 9100 silver front 15 SideWindows cover plate (pk=2) 00 Speedglas 9100 head harness including assembly parts 00 Speedglas 9100 pivot mechanism, left and right for head harness 00 Speedglas 9100 head harness front part 00 Speedglas 9100 head harness back part
Speedglas is the worlds leading brand of welding shields. Just as hundreds of thousands of users rely on Speedglas products every day for their best welding performance, we rely on welder comments for future product designs, developments and innovations.
Visit us at www.awsupplies.com.au
3M Australia Pty. Limited 950 Pacific Hwy Pymble NSW 2073 Australia
Australian Welding Supplies Pty. Ltd Unit 5, 68 McLachlan Avenue Artarmon NSW 2064 Australia Tel: (02) Fax: (02) E-mail: sales@awsupplies.com.au www.awsupplies.com.au
2008 All rights reserved. Speedglas and Adflo are trademarks of 3M.