Steca PR 0303/0505 Solar Charge Controller
Modified PWM charging series regulator with electronic fuse and manual load switch. The LED display shows the charging by a solar module, the state of charge of the battery in three colors. Big terminals ensure an easy installation.
Article Steca PR 0303 Steca PR 0505
Description (3 A module current / 3 A load current / 12 V) (5 A module current / 5 A load current / 12 V)
Dimensions 146 x 90 x 33 mm 146 x 90 x 33 mm

Weight 160 g 160 g

Article No. 101.260 101.261
Steca PR & Solarix Solar Charge Controller
High perfomance microcontrolled charge controller, apart from the base functions deep discharge and overvoltage protection, this charge controller range offers a mulittude of comfortable additional functions as e.g. LC-display, temperature compensation, exact state of charge (SOC) display (PR Series), compensation of voltage drop between battery and charge controller, hard and software fuse, automatic voltage adjustment (12/24V), etc. Steca Solarix Series Article Steca Solarix Series with LED Steca Alpha Steca Gamma Steca Sigma Steca Omega Steca PR Series with LCD Steca PR 1010 Steca PR 1515 Steca PR 2020 Steca PR 3030 (10 A module current / 10 A load current / 12/24 V) (15 A module current / 15 A load current / 12/24 V) (20 A module current / 20 A load current / 12/24 V) (30 A module current / 30 A load current / 12/24 V) 187 x 96 x 44 mm 187 x 96 x 44 mm 187 x 96 x 44 mm 187 x 96 x 44 mm 350 g 350 g 350 g 350 g 104.514 104.515 104.516 104.517 (8 A module current / 8 A load current / 12/24 V) (12 A module current / 12 A load current / 12/24 V) (20 A module current / 20 A load current / 12/24 V) (30 A module current / 30 A load current / 12/24 V) 188 x 106 x 49 mm 188 x 106 x 49 mm 188 x 106 x 49 mm 188 x 106 x 49 mm 375 g 375 g 375 g 375 g 101.204 101.205 101.206 101.207 Description Dimensions
Steca PR Series Weight Article No.
Steca PR 2020-IP Solar Charge Controller
The PR 2020-IP design is based on Stecas PR charge controller series with a customer designed LCD which shows the accurate state of charge (SOC) in percent and as battery gauge symbol. The heart of the controller is the integrated circuit called ATONIC II, which contains the improved regulation software based on a self learning algorithm. The PR 2020-IP controller operates in harsh enviroments like salt, moisture and dust. Article Steca PR 2020-IP Description (20 A module current / 20 A load current / 12 V) Dimensions 122 x 55 x 147 mm Weight 350 g Article No. 101.463

page 18

Solar Charge Controller Steca Solarix 2401/4401 Solar Charge Controller
The Steca Solarix 2401 and 4401 controllers complete the product range of the Omega 30 Amps controller to 40 Amps solar current, available in 12, 24 and 48 V. The load current is limited to 10 Amps. The charging procedures are based on voltage levels which can be individually adjusted by four buttons behind the front cover.
Article Steca Solarix 2401 Steca Solarix 4401
Description (40 A module current / 10 A load current / 12/24 V) (40 A module current / 10 A load current / 48 V)
Dimensions 188 x 128 x 49 mm 188 x 128 x 49 mm

Weight 550 g 550 g

Article No. 101.464 101.465
Steca PR 0606/1010N Solar Charge Controller
Solar charge controller with time controlled night light function contains all basic functions of a comfortable charge controller as deep discharge and over load protection, LED, etc. and addtionally integrated programmable timer function for the time controlled switching of loads (e.g. lamps). Article Steca PR 0606N Steca PR 1010N Description (6 A module current / 6 A load current / 12/24 V) (10 A module current / 10 A load current / 48 V) Dimensions 146 x 94 x 28 mm 146 x 94 x 28 mm Weight 120 g 120 g Article No. 101.220 101.221
Steca Tarom Solar Charge Controller
The presently leading charge controller product range referring to equipment and performance. Apart from the basic functions of an ordinary solar charge controller (deep discharge and over load protection), this product range offers countless possibilities related to programmability, data processing, system configuration, unit-by-unit expansibility and performance. In addition to a lot of characteristics, a two lined LC-display, integrated data logger, PC connection, programmable operating points, exact state of charge (SOC) display, Ah counter and a lot more can be mentioned. Article Steca Tarom 235 Steca Tarom 245 Steca Tarom 440 Description (35 A module current / 35 A load current / 12/24 V) (45 A module current / 45 A load current / 12/24 V) (40 A module current / 40 A load current / 48 V) Dimensions 188 x 128 x 49 mm 188 x 128 x 49 mm 188 x 128 x 49 mm Weight 534 g 534 g 534 g Article No. 101.222 101.223 101.466

Steca Solarix PRS Solar Charge Controller
The simplicity and high performance of the new Steca Solarix PRS solar charge controller make it particularly attractive. At the same time, it offers a modern design and a convenient display, all at an extremely attractive price. Several LEDs in various colours emulate a tank display, which gives information on the charge status of the battery. Here, Stecas latest algorithms are employed in order to guarantee optimal battery maintenance. The Solarix PRS charge controllers are equipped with an electronic fuse, thus ensuring the optimal protection. They operate on the serial principle, and separate the solar module from the battery in order to protect it against overcharging. The Solarix PRS charge controllers are universal charge controllers, which means they can be used with lead-acid batteries or gel batteries without the need for complex configuration settings.For larger projects, the charge controllers can also be equipped with special functions. These include the night light function, and selectable charging plateau and deepdischarge protection voltages. Article Steca PRS 1010 Steca PRS 1515 Steca PRS 2020 Steca PRS 3030 Description (10 A module current / 10 A load current / 12/24 V) (15 A module current / 15 A load current / 12/24 V) (20 A module current / 20 A load current / 12/24 V) (30 A module current / 30 A load current / 12/24 V) Dimensions 187 x 96 x 44 mm 187 x 96 x 44 mm 187 x 96 x 44 mm 187 x 96 x 44 mm Weight 350 g 350 g 350 g 350 g Article No. 101.475 101.476 101.477 101.478
Sundaya Apple Solar Charge Controller
The Apple is a charge discharge regulator with an unique battery forced health improvement feature (FHI ). The apple is equipped with an alarm to warn the user when battery is close to forced disconnect. The Apple uses latest technology ultra efficient switching components which results in extreme low voltage drop and almost no heat generation. The unit has very sturdy terminals. Article Sundaya Apple 5 Sundaya Apple 10 Sundaya Apple 15 Sundaya Apple 20 Apple 5 & cable set Apple 10 & cable set Apple 15 & cable set Description (12 VDC / 5 A module current / 5 A load current) (12 VDC / 10 A module current / 10 A load current) (12 VDC / 15 A module current / 15 A load current) (12 VDC / 20 A module current / 20 A load current) (12 VDC / 5 A module current / 5 A load current) (12 VDC / 10 A module current / 10 A load current) (12 VDC / 15 A module current / 15 A load current) Dimensions 120 x 40 mm 120 x 40 mm 120 x 40 mm 120 x 40 mm 120 x 40 mm 120 x 40 mm 120 x 40 mm Weight 100 g 100 g 100 g 100 g 100 g 100 g 100 g Article No. 101.994 101.995 101.996 104.537 104.531 104.532 104.533

page 20

Solar Charge Controller Phaesun PR Series Solar Charge Controller
The most important difference to comparable products is a big graphical display. This shows all system information in a self explainatory manner with logical informative symbols. The integrated central processing unit called Atonic provides a charge controller with new functions. This type of controller is more than a protective device for a battery. It contains a self-learning algorithm, which gives detailed information on the batterys state of charge ( SOC ). This optimized state of charge algorithm is more precise than ever and is displayed similar to a fuel gauge. It adjusts itself to the batterys age and capacity. The SOC provides a basis for all control and regulatory functions. This new type of hybrid charge controller is much more efficient than conventional series and shunt controllers. Furthermore the controller is equipped with an electronic fuse with superior protection to a mechanical fuse. This offers more comfort and reliability to the user as it reconnects automatically. In addition a manual load switch is integrated. Article Phaesun PR 1010 Phaesun PR 1515 Phaesun PR 2020 Phaesun PR 3030 Description (10 A module current / 10 A load current / 12/24 V) (15 A module current / 15 A load current / 12/24 V) (20 A module current / 20 A load current / 12/24 V) (30 A module current / 30 A load current / 12/24 V) Dimensions 187 x 96 x 44 mm 187 x 96 x 44 mm 187 x 96 x 44 mm 187 x 96 x 44 mm Weight 350 g 350 g 350 g 350 g Article No. 104.507 104.508 104.509 104.510

Phaesun EASY MPPT Charge Controller
Adopting advanced MPPT technology, the EASY MPPT photovoltaic charge controller is the key component in off-grid or stand alone solar power generation system. The EASY MPPT is tracking the maximum power point and charging all types of batteries. The build-in MPPT microprocessor enables the EASY MPPT to increase the charging current up to 30% compared to traditional charge controllers. Easy installation and designed for parallel operation, the EASY MPPT is the perfect solution for home systems and large solar system applications. Article Phaesun EASY MPPT Description (40 A module current / 15 A load current / 12/24 V) Dimensions 368 x 146 x 146 mm Weight 2,5 kg Article No. 104.571
OutBack PV MPPT Charge Controller
The Outback MX60 maximum power point tracking (MPPT) charge controller enables your PV system to achieve its highest possible performance. Rated for up to 60 amps of DC output current, the MX60 can be used with battery systems from 12 to 60 VDC with a PV open circuit voltage as high as 140 VOC. The MX60s setpoints are fully adjustable to allow use with virtually any battery type and charging profile. The MX60 allows you to use a higher output voltage PV array with a lower battery voltage - such as charging a 24 VDC battery with a 48 VDC PV array. The four line, 80 character, backlit LCD display is used for programming and monitoring of the systems operation including built-in Data Logging with 64 days of memory.
Article OutBack MX60 Charge Controller
Description (60A / 12 - 60 VDC battery / 140 VOC)
Dimensions 150 x 150 x 370 mm

Weight 5,4 kg

Article No. 107.022

page 21

Solar Charge Controller Accessories Solar Charge Controller Temperature Sensors
External temperature sensors including 3 m cable, cable coil, 8 or 10 mm removable cable clamp. For solar charge controllers of the following types: 101.204 - 101.211, 101.212 - 101.215 Article Temperature Sensor TS 8 Temperature Sensor TS 10 Description (8 mm cable coil) (10 mm cable coil) Dimensions ----Weight ----Article No. 101.236 101.237
External temperature sensors including cable coil, 8 or 10 mm cable clamp. For solar charge controllers of the following types: 101.216 - 101.219, 101.229 - 101.234 Article Temperature Sensor KTY 881-8 Temperature Sensor KTY 881-10 Description (8 mm cable coil) (10 mm cable coil) Dimensions ----Weight ----Article No. 101.238 101.239
External temperature sensors including 3,75 m cable, cable coil, 8 or 10 mm removable cable clamp. For solar charge controllers and special plug of the following types: 101.222 - 101.225 Article Temperature Sensor TS 8 cable Temperature Sensor TS 10 cable Description (8 mm cable coil) (10 mm cable coil) Dimensions ----Weight ----Article No. 101.240 101.241

Steca PA EV200 DC Relay

Steca PA EV200 relay increases the switching capacity of the PA 15 remote control from 15 A to 200 A (up to 10kW). The relay is connected to the load output of the PA 15 and interrupts for example, the battery supply voltage from a back-up generator when the battery is full. The relay is hermetically sealed, intrinsically safe and operates in explosive & harsh enviroments like salt, moisture and dust with no oxidation or contamination of coils or contacts. Article Steca PA EV200 Type A Steca PA EV200 Type B Description (12/24 V / 9 - 36V / 200 A) (36/48 V / 32 - 95V / 200A) Dimensions 63 x 80 x 72 mm 63 x 80 x 72 mm Weight 430 g 430 g Article No. 101.469 101.470
Steca Tarom PA 15 Receiver (for Steca Tarom)
The PA 15 unit is able to receive the SOC (state of charge) signal from the charge controller (Tarom product range) and depending on the configuration it cuts off loads or puts on additional generators. A charging management is the second feature of the PA 15 receiver. The programming of the PA 15 is made by a jumper connection terminal.

Article Steca PA 15

Dimensions ---

Weight ---

Article No. 101.247
Steca PA IRS 1008/108 Motion Detector
The Steca PA IRS 1008/108 motion detector is connected to the load output of the night light charge controller. This supplies power to the ligth, which is then turned on for a few minutes when some movement is detected. The Steca IRS 1008/108 stands out, above all, through its extremely low own consumption, and is therefor optimal for use in solar power systems. Article Steca PA 15 Description (12 V / reach 7 m - 180 / IP 65) Dimensions --Weight 100 g Article No. 105.472

page 22

Solar Charge Controller Accessories Steca PA Shunt Regulator
Intelligent hall shunt for Tarom and Power Tarom regulator. Contactless current sensor measuring of all battery currents. Potential free shunt. A RJ45 interface communication with Tarom controllers for exact SOC calculation. Parallel operation with several PA HS200 is possible.

Article Steca PA HS 200

Article No. 101.264
Steca PA Tarcom Data Logger
Stecas data logger PA Tarcom is connected to thee RJ45 data loop of the Tarom or Power Tarom charge controller or via the PA HS200 shunt. It is available in different versions as a simple RS232 serial interface (PA Tarcom 01) to log and read out data directly to a PC or laptop, as a data logger connected with integrated analogue modem (PA Tarcom RM), as a data logger with an optional telephone link for phone calls (PA Tarcom RMT) and as a datalogger with a built in GSM modem for remote monitoring (PA Tarcom GSM). The PA Tarcom data logger is shipped with software. Article Steca Tarcom 01 serial Steca Tarcom RM/RMT Steca Tarcom GSM Description (system 12/24/48 V / operation 8 - 65 V) (system 12/24/48 V / operation 8 - 65 V) (system 12/24/48 V / operation 8 - 65 V) Dimensions 130 x 82 x 38 mm 130 x 82 x 38 mm 130 x 82 x 38 mm Weight 150 g 150 g 150 g Article No. 101.269 101.467 101.468

page 23

Stand Alone Inverter Studer Stand Alone Inverter Line AJ
Simple and reliable inverters with a pure sine wave for 230 or 115 V AC. These units can be used for multiple applications in cars, summer houses, on the road, in boats, etc. just in all places without net supply. Moreover, this product range shows multiple equipment features such as overheating protection, overcharge protection, short circuit protection, etc., as well as an integrated solar charge controller as an additional option.
AJ 275 / AJ 350 / AJ 400 AJ 500 / AJ 600 / AJ 700 AJ 1000 / AJ 1300 AJ 2100 / AJ 2400

JT8 Remote control

Article Studer Inverter Lines AJ 275 / AJ 350 / AJ 400 Studer AJ 275-12 Studer AJ 275-12-S Studer AJ 350-24 Studer AJ 350-24-S Studer AJ 400-48 Studer AJ 500-12 Studer AJ 500-12-S Studer AJ 600-24 Studer AJ 600-24-S Studer AJ 700-48 Studer Inverter Lines AJ 1000 / AJ 1300 Studer AJ 1000-12 Studer AJ 1000-12-S Studer AJ 1300-12 Studer AJ 1300-12-S Studer AJ 2100-12 Studer AJ 2100-12-S Studer AJ 2400-24 Studer AJ 2400-24-S Studer Inverter Lines AJ 2100 / AJ 2400
Description (WR 12 V / 220 V / IP30 / 200 W) (WR 12 V / 220 V / IP30 / 200 W / 7A SCC) (WR 24 V / 220 V / IP30 / 250 W) (WR 24 V / 220 V / IP30 / 250 W / 7 A SCC) (WR 48 V / 220 V / IP30 / 300 W) (WR 12 V / 220 V / IP30 / 400 W) (WR 12 V / 220 V / IP30 / 400 W / 15 A SCC) (WR 24 V / 220 V / IP30 / 400 W) (WR 24 V / 220 V / IP30 / 400 W / 15 A SCC) (WR 48 V / 220 V / IP30 / 400 W) (WR 12 V / 220 V / IP30 / 800 W) (WR 12 V /220 V / IP30 / 2000 W / 30 A SCC) (WR 24 V / 220 V / IP30 / 800 W) (WR 24 V /220 V / IP30 / 2000 W / 30 A SCC) (WR 12 V / 220 V / IP30 / 2000 W) (WR 12 V / 220 V / IP30 / 2000 W / 30 A SCC) (WR 24 V / 220 V / IP30 / 2000 W) (WR 24 V / 220 V / IP30 / 2000 W / 30 A SCC)

When the AquaGen premium.top recombination system is used, the hydrogen and oxygen gases which evolve during water decomposition are fed into the AquaGen recombination plugs. By means of an integral catalyst, these gases are recombined in the form of water vapour. This water vapour condenses on the sides of the AquaGen premium.top vent plugs. The resultant drops of water flow downwards and are returned to the battery. Because of this level of efficiency, water refilling is drastically reduced, with even total freedom from maintenance being possible. Another benefit from the use of AquaGen premium.top recombination plugs is a considerable reduction in the ventilation requirements according to EN 50272-2 / DIN VDE 0510 Part 2 (European standards). The recombination of hydrogen and oxygen is an exothermal process in which heat is released. With sealed batteries, this recombination takes place internally at the negative electrodes. The increased temperature in the interior of sealed batteries leads to life-reducing effects, especially at the electrodes. To minimise these negative side effects, the operation of sealed batteries is subject to various limitations. When AquaGen premium.top is used, the recombination does not take place at the active components (electrodes) and not within the battery. The AquaGen premium.top recombinator is fitted to the battery as an external component. This avoids any temperature rise inside the battery. The separation of the recombination process from the active components of the battery allows maximisation of freedom from maintenance, as for sealed batteries, without reducing life expectancy and with no restrictions on operation of the battery. The AquaGen premium.top H version is available for capacities up to 340 Ah and for applications with restrictions due to dimensions (e.g. height with reference to battery erection, and depth with reference to cell size). Article AquaGen premium.top H AquaGen premium.top V Description (for OPzS batteries with bayonet fixing 24 mm) (for OPzS batteries with bayonet fixing 24 mm)

12/24 VDC Ceiling Fans

High efficiency DC ceiling fan Power consumption: N=11W @ U=12V, T=45C N=50W @ U=24V, T=45C Speed: n=160 1/min @ U=12V, T=45C n=240 1/min @ U=24V, T=45C Diameter: 135 cm (52) Air flow: Q=4900 m/h (2400 cfm) U=12V Q=10300 m/h (5000 cfm) U=24V Article DC Ceiling Fan BWB with brown wooden blades DC Ceiling Fan BWB with white wooden blades DC Ceiling Fan BWB with white aluminium blades Rheostatic Speed Control for DC Ceiling Fan Description Dimensions 135 cm 135 cm 135 cm 110 x 60 x 95 mm Weight 5 kg 5 kg 5 kg 200 g Article No. 103.400 103.401 103.402 103.403

page 45

Refrigerator and Freezer Boxes Sunfreezer Cooling Boxes and Refrigerator Cabinet
Well designed cooling boxes especially developed for the mobile use with a highly efficient operation mode due to an innovative adjustment to the demands of photovoltaic energy use. Due to the strong insulation and the use of an energy saving component, these boxes are perfectly suitable for the operation with solar energy. The high performance 12/24V Danfoss compressors are also used here. Article Sunfreezer cooling boxes Sunfreezer 30 Sunfreezer 50 Sunfreezer refrigerator cabinet Sunfreezer 60 (60 l / 12/24 V /cabinet) 615 x 486 x 470 mm 22,5 kg 101.712 (30 l / 12/24 V / refrigerator box) (50 l / 12/24 V / refrigerator box) 370 x 420 x 515 mm 450 x 695 x 475 mm 17,5 kg 23,6 kg 101.710 101.711

Sunfreezer 30

Sunfreezer 50

Weight

Steca SolarFridge
The new Steca SolarFridge product generation is perfectly optimized for the use in solar applications. Energy efficiency is the highest priority for such applications. The new A++ DC Fridge generation realizes a complete concept. Best isolation combined with a very efficient and silant DC compressor which is driven by a specially designed Steca electronic compressor regulation guarantee an optimum use of the available solar power within the system.Optionally the Steca SolarFridge coolers can be equipped with one of the well known Steca Solar charge regulators which interact optimally with the fridge functionality. In this case just a suitable battery and the solar module has to be connected to the Steca SolarFridge to start cooling. Especially the Steca SolarFridge as a top opener is optimally suited for applications under high ambient temperature as it protects the content of the fridge also while the cabinet is opened. Article Steca SolarFridge PF166 Description (166 l / 12/24 V) Dimensions 917 x 872 x 709 mm Weight 61 kg Article No. 101.768

Lapp Solar Cable

The Lapp Solar Cable high quality solar cable, with double isolation and a temperatur range of -40 up to 120C. It is also UV and ozon resistant, made of rubber tube copper fine wire and certified by the German TV. Article Lapptherm Solar Plus 2,5 mm black Lapptherm Solar Plus 2,5 mm blue Lapptherm Solar Plus 2,5 mm red Lapptherm Solar Plus 4 mm black Lapptherm Solar Plus 4 mm blue Lapptherm Solar Plus 4 mm red Lapptherm Solar Plus 6 mm black Lapptherm Solar Plus 6 mm blue Lapptherm Solar Plus 6 mm red Lapptherm Solar Plus 10 mm black Description (900/1500 V) (900/1500 V) (900/1500 V) (900/1500 V) (900/1500 V) (900/1500 V) (900/1500 V) (900/1500 V) (900/1500 V) (900/1500 V) Dimensions 5,8 mm 5,8 mm 5,8 mm 5,8 mm 5,8 mm 5,8 mm 5,8 mm 5,8 mm 5,8 mm 5,8 mm Weight 50 g/m 50 g/m 50 g/m 76 g/m 76 g/m 76 g/m 107 g/m 107 g/m 107 g/m 107 g/m Article No. 103.232 103.245 103.242 103.239 103.246 103.243 103.240 103.247 103.244 103.241

page 53

Plastic Connection Profiles Universal Module Fixture
Standard modules of Phaesun, Helios, Suntech, etc. can now be installed with the help of new Universal Assembly Fixtures. The assembly sets made of UV resistant PU plastics are optically attractive and can be assembled easily and quickly. An optimized back ventilation is also guaranteed by this system, especially with caravan vehicles and boots. Therefore, the module works more efficiently under direct irradiation during the summer months. The assembly sets are supplied in black. Junction profiles can be used for a better fastening of several modules. Additional spoiler profiles can be sticked alongside the total length which improve the aerodynamics of the assembled model and thus Corner set MT-EP contribute to saving fuel. Article Corner set MT-EP 4 corner carriers / universally appropriate for all solar modules Junction set MT-VP 2 junction carriers to link several modules in connection with corner/spoiler sets Spoiler set MT-SP fixing spoilers for solar modules with a lateral length of approximately 33 cm Spoilerset MT-SP fixing spoilers for solar modules with a lateral length of approximately 45 cm Spoilerset MT-SP fixing spoilers for solar modules with a lateral length of approximately 53 cm Spoilerset MT-SP fixing spoilers for solar modules with a lateral length of approximately 65 cm 650x90x66 mm 2,15 kg 102.713 530x90x66 mm 1,95 kg 102.705 450x90x66 mm 1,5 kg 102.704 330x90x66 mm 1,2 kg 102.703 180x90x66 mm 0,8 kg 102.702

Lorentz ETATRACK active 1000 (angle East-West: 90 / elevation angel: 0 - 45) Lorentz ETATRACK active 1500 (angle East-West: 90 / elevation angel: 0 - 45)

page 55

Accessories Phaesun DC Installations
The equipment has been developed for solar powered (battery) installations, rating from 12 to 48V DC. 10A - 2 pole, no earth. The socket outlet cover plates are made of thermosetting plastic. This DC equipment is totally polarized, e.g. the plug will fit only one way in the outlet, assuring correct polarity at all times. Consequently the plug has one thick and one thin pin - making the polarity unmistakeable. Suitable equipment onboard for e.g. boats, yachts, campers, cottages etc. and areas without fully built-out electrical network that are dependant on rechargable batteries based on solar energy.
DC Plug No Earth DC Double Surface Socket DC Flush Type Double Surface Socket
DC Junction Box Article DC Double Surface Socket 12 - 48 V DC Flush Type Double Surface Socket 12 - 48 V DC Plug No Earth 12 - 48 V DC Junction Box Toggle Switch Drop Light Fitting EVDC Description
Toggle Switch Dimensions 95 x 62 x 25 mm 95 x 85 x 30 mm 36 x 45 mm 65 x 50 x 29 mm 63 x 63 x 36 mm [L] = 70 cm
Drop Light Fitting E27 Weight 86 g 104 g 23 g 40 g 75 g 95 g Article No. 103.710 103.711 103.712 103.713 103.734 107.219

CBI Circuit Breaker

Article QY-1 (13) D,U2, 10 A QY-1 (13) D,U2, 16 A QY-1 (13) D,U2, 20 A QY-1 (13) D,U2, 40 A
Description (80 VDC / 10 A / 1 pole) (80 VDC / 16 A / 1 pole) (80 VDC / 20 A / 1 pole) (80 VDC / 40 A / 1 pole) (80 VDC / 50 A / 1 pole) (80 VDC / 60 A / 1 pole) (80 VDC / 32 A / 1 pole) (80 VDC / 180 A / 2 pole)
Dimensions 93 x 12 x 74 mm 93 x 12 x 74 mm 93 x 12 x 74 mm 93 x 12 x 74 mm 93 x 12 x 74 mm 93 x 12 x 74 mm 93 x 12 x 74 mm 115 x 40 x 80 mm
Weight 100 g 100 g 100 g 100 g 100 g 100 g 100 g 300 g
Article No. 102.892 102.893 102.894 102.895 102.896 102.897 102.920 107.220
Lightboy QY-1 (13) D,U2, 50 A
QY-1 (13) D,U2, 60 A QY-1 (13) D,U2, 32 A D-Frame Circuit Breaker 180 A

Lightboy Timer

Article Lightboy 12 V Timer Description Dimensions 112 x 72 x 40 mm Weight 300 g Article No. 103.805

Lightboy Movement Sensor

The Lightboy Movement Sensor is designed for wall or ceiling installation, has got a range of up to 10m and a assessment angle of 120. The Lightboy Movement Sensor allows a stepless external adjustment of time, the value of dawn and range. It is easy to install and the sensor head is horizontally and vertically transversable. Article Lightboy Movement Sensor Phaesun Product Catalogue 2008 Description (12 VDC / 10 A / 5 to 1000 Lux) Dimensions 78 x 160 x 72 mm Weight 200 g Article No. 103.806

page 56

Battery Charger

Fronius Battery Charger

Fronius offers a complete range of primary transistor-switched battery charging units specially for traction batteries. These units do not use conventional thryristors, but much smaller and lighter power-electronic components. Fronius has perfected his mastery of the technology of primary transistorswitched heavy-duty power sources over a period of nearly 20 years. This long standing experience guarantees a maximum of reliability amid the rough-and-tumble of industrial use. Article Fronius Selectiva Eco 1020 Fronius Selectiva Eco 1030 Fronius Selectiva Eco 2010 Fronius Selectiva Eco 2020 Fronius Selectiva Eco 2030 Fronius Selectiva Eco 3020 Fronius Selectiva Eco 4015 Fronius Selectiva Plus 2050E Fronius Selectiva Plus 3050E Fronius Selectiva Plus 4050E Description (charging current 20 A / output 12 V) (charging current 30 A / output 12 V) (charging current 16 A / output 24 V) (charging current 80 A / output 24 V) (charging current 50 A / output 24 V) (charging current 20 A / output 36 V) (charging current 15 A / output 48 V) (charging current 50 A / output 24 V) (charging current 50 A / output 36 V) (charging current 50 A / output 48 V) Dimensions 285 x 71 x 142 mm 285 x 71 x 142 mm 285 x 71 x 142 mm 285 x 71 x 142 mm 285 x 71 x 142 mm 285 x 71 x 142 mm 285 x 71 x 142 mm 312 x 200 x 110 mm 312 x 200 x 110 mm 312 x 200 x 110 mm Weight 2 kg 2 kg 2 kg 2 kg 2 kg 2 kg 2 kg 5 kg 5 kg 5 kg Article No. 104.339 104.338 104.337 104.336 104.335 104.334 104.333 104.332 104.331 104.330

Studer Battery Charger

Chargers in the MBC range provide specific charging for 1, 2 or 3 banks of batteries in accordance with the battery manufacturers specification. Entirely automatic with built-in charge distribution they can remain permanently connected to the batteries in complete safety and do not need to bwe disconnected when starting engine. MBC chargers are protected against polarity reversal and transient short-circuits.

Article Studer MBC 12-06/1 IP65 Studer MBC 12-15/1 IP65 Studer MBC 24-03/1 IP65 Studer MBC 24-08/1 IP65 Studer MBC 12-25/3 Studer MBC 12-40/3 Studer MBC 12-60/3 Studer MBC 12-80/3 Studer MBC 24-12/3 Studer MBC 24-20/3 Studer MBC 24-30/3 Studer MBC 24-50/3 Studer MBC 24-60/3
Description (charging current 6 A / output 12 VDC) (charging current 15 A / output 12 VDC) (charging current 3 A / output 24 VDC) (charging current 8 A / output 24 VDC) (charging current 25 A / output 12 VDC) (charging current 40 A / output 12 VDC) (charging current 60 A / output 12 VDC) (charging current 80 A / output 12 VDC) (charging current 12 A / output 24 VDC) (charging current 20 A / output 24 VDC) (charging current 30 A / output 24 VDC) (charging current 50 A / output 24 VDC) (charging current 60 A / output 24VDC)
Dimensions 155 x 80 x 36 mm 195 x 100 x 47 mm 155 x 80 x 36 mm 195 x 100 x 47 mm 200 x 270 x 120 mm 230 x 290 x 120 mm 280 x 360 x 135 mm 280 x 360 x 135 mm 200 x 270 x 120 mm 230 x 290 x 120 mm 280 x 360 x 135 mm 280 x 360 x 135 mm 280 x 360 x 135 mm
Weight 1 kg 2 kg 1 kg 2 kg 2,5 kg 4 kg 4 kg 5 kg 2,5 kg 4 kg 5 kg 5 kg 5 kg
Article No. 103.342 103.343 103.344 103.345 103.346 103.347 103.348 103.349 103.350 103.351 103.352 103.353 103.354

page 57

OutBack Products
OutBack Systems OutBack Power System FLEXware 500
OutBack Power offers compact enclosures for all the AC and DC components of a renewable energy power conversion system. The FLEXware 500 series saves time, money and space by combining the disconnects, over-current protection devices and control components into easy-to-install enclosures. Capable of supporting one or two OutBack FX series inverter/chargers, up to three MX60 charge controllers, a MATE system controller and all the associated AC and DC components. The OutBack FLEXware 500 series can be fully customized to your application and ordered pre-wired or as individual components for field assembly. The following chart is just for example. There are a lot more possibilities for OutBack Systems in 12, 24 and 48 V, with or without solar. Article OutBack 2 kVA/12 V Back-up System OutBack 2 kVA/24 V Back-up System OutBack 3 kVA/24 V Back-up System OutBack 3 kVA/48 V Back-up System OutBack 4 kVA/24 V Back-up System OutBack 6 kVA/24 V Back-up System OutBack 6 kVA/48 V Back-up System Description (2 kVA / 12 V / FX 2012ET) (2 kVA / 24 V / FX 2024ET) (3 kVA / 24 V / VFX 3024E) (3 kVA / 48 V / VFX 3048E) (4 kVA / 24 V / 2x FX 2024E) (6 kVA / 24 V / 2x VFX 3024E) (6 kVA / 48 V / 2x VFX 3048E) Dimensions 516 x 1117 x 400 mm 516 x 1117 x 400 mm 516 x 1117 x 400 mm 516 x 1117 x 400 mm 516 x 1117 x 400 mm 516 x 1117 x 400 mm 516 x 1117 x 400 mm Weight 63 kg 63 kg 63 kg 63 kg 93 kg 93 kg 93 kg Article No. 107.123 107.116 107.110 107.118 107.117 107.111 107.119
OutBack Power System FLEXware 1000
The FLEXware 1000 series is the ideal AC and DC enclosure system for medium to large size renewable energy power conversion systems. The FLEXware is comprised of two compact enclosures for all of your systemss AC and DC components. It saves time, money and space by combining disconnects, over-current protection devices and control components into easy-to-install enclosures. The FLEXware 1000 is capable of supporting up to four OutBack FX series inverter/chargers, six MX60 charge controllers, a MATE system controller and all the required AC and DC components and wiring. The OutBack FLEXware 1000 system can be fully customized to your application and ordered pre-wired or as individual components for field assembly. It is also available as a 3-Phase system. Three inverter/chargers can be configured to provide 120/208 VAC or 230/400 VAC four wire Wye/Star three phase AC power. An inverter/charger is used to power each of the three legs for 3-phase AC power. The loads on each of the inverters does not need to be kept balanced, each phase is independently voltage regulated.The following chart is just for example. There are a lot more possibilities for OutBack Systems in 12, 24 and 48 V, with or without solar. Article OutBack 6 kVA/24 V Back-up System 3-Phase OutBack 9 kVA/24 V Back-up System OutBack 9 kVA/24 V Back-up System 3-Phase OutBack 9 kVA/48 V Back-up System OutBack 9 kVA/24 V Back-up System 3-Phase OutBack 10,8 kVA/48 V Back-up System 3-Ph. OutBack 12 kVA/48 V Back-up System Description (6 kVA / 24 V / 3 x FX 2024E) (9 kVA / 24 V /3 x VFX 3024E) (9 kVA / 24 V / 3 x VFX 3024E) (9 kVA / 48 V / 3 x VFX 3048E) (9 kVA / 48 V / 3 x VFX 3048E) (10,8 kVA / 48 V / 3 x VFX 3648) (12 kVA / 48 V / 4 x VFX 3048E) Dimensions 910 x 1260 x 400 mm 910 x 1260 x 400 mm 910 x 1260 x 400 mm 910 x 1260 x 400 mm 910 x 1260 x 400 mm 910 x 1260 x 400 mm 910 x 1260 x 400 mm Weight 146 kg 130 kg 146 kg 130 kg 146 kg 146 kg 176 kg Article No. 107.120 107.121 107.115 107.112 107.114 107.122 107.113

Sundaya Tablo

The Tablo is a Lamp base for a table lamp with a build in switch and cable with DC plug. The Tablo can be completed with the Pointer and Ulite Ulux or Luna with a Halo or Skirt shade.

Article Sundaya Tablo

Dimensions 175 x 20 mm

Weight 800 g

Article No. 101.778

Sundaya E17 Lamp Shades

The Halo is a durable UV-stabilized lampshade that focusses the light downwards over a widespread area. The Halo is suitable for use as a hanging or satanding table lamp or general purpose lamp in the living room. The Wally is a durable UV-stabilized lampshade that can be mounted to the wall for indoor or outdoor lighting purposes. The Skirt is a durable unbreakable polycarbonate lampshade to be used for a hanging or table lamp. The Skirt distributes the light nicely to create a cozy atmosphere. Article Sundaya Halo Sundaya Wally Sundaya Skirt Natural Sundaya Skirt Red Sundaya Skirt Green Phaesun Product Catalogue 2008 (clear color) (red color) (green color) Sundaya Skirt

Sundaya Halo

Sundaya Wally
Dimensions 222 x 33 mm 212 x 210 x 115 mm 115 x 180 mm 115 x 180 mm 115 x 180 mm
Weight 72 g 117 g 121 g 121 g 121 g
Article No. 101.773 101.772 101.599 101.770 101.771

page 67

Sundaya 12 VDC Installation Material Sundaya C- and D-Plug
The D-Plug is the male part of the Sundaya 12 VDC shock-proof plug system. It`s Design is compareable to a 230 VAC shock-proof plug, but in difference to the 230 V version it has got plugging poles with a square profile instead of round. And the poles are arranged in different directions - because of that a wrong polarisation is impossible. The C-Plug is the female counterpart to the D-Plug. Both are designed for currents up to 10 Ampere. Article Sundaya D-Plug Sundaya C-Plug cable Sundaya D-Plug cable
Sundaya C-Plug Dimensions 70 x 20 x 10 mm [L] = 1 m [L] = 1 m
Sundaya D-Plug Weight 50 g 100 g 100 g Article No. 101.999 104.535 104.536
Description (12 VDC / 10 A / male) (12 VDC / 10 A / female / incl. cable) (12 VDC / 10 A / male / incl. cable)
Sundaya FPlug - MPlug Cable