TIE LINES

Other keys: Green key: this is used when the set is idle or in communication,
to call back the last number dialled (LNR function).
Red key: this is used - during a communication, to end the call, - during programming, to cancel a setting or end a programming sequence. Directory key: not available in attendant mode. Programming key: this is used to access the settings (rings and

contrast).

Loudspeaker key: this is used to enable and disable the loudspeaker
mode. The associated lamp lights up to remind you that the feature has been enabled.
Mute key: during a call, this key lets you cut off the microphone
(handset, hands free or micro-headset) and talk without your correspondent being able to hear you. The associated lamp lights up to remind you that the feature has been enabled.
R Key (Flashing): during a call, this key is used to access dialling (e.g. to call a second correspondent). Depending on the features available through your system operator. Navigator: this comprises four direction keys and one central key.
- The - The - The and keys are used to display a selection or a record. and keys are used to carry out a setting. key is used to confirm a choice or a setting.
ON :/OFF PUBLIC EXCHANGE 1 PUBLIC EXCHANGE 2
Alphabetic keypad: this is used - to make a call using the name of a correspondent and search for a correspondent in the internal and external directories, - to enter text when notifying a correspondent. Open the cover to reveal the keypad.

The interactive display

The M760E features a display unit with 5 interactive keys and a navigator. You can adjust the display contrast (see Settings). The display comprises one line of information and a second showing the functions available with the interactive keys. Note: the information shown varies according to the set programming and the associated system*. When the set is idle: When idle, the display shows the number of incoming calls for any exchange (1 - 2 - SERVICES or TIE LINES).

PE2:00 Comm. PE1:00 Status INT:00 Funct. TL:01 More
The second line shows the functions available when idle via the interactive keys. During a call: The first line shows the identity of the correspondent during an incoming call - internal call:
CALL FROM XXXXXXXXX Comm Prenum <-Start Tone -->

- external call:

PUB.EXCHANGE:XXXXXXXXXX EQ:01/02/04 Comm Prenum <-Start Tone -->
The second line shows the functions available during a call via the interactive keys. During programming: The display shows the programming selection:
WHAT DO YOU WANT TO PROGRAM? Number Superv. Tone
The second line shows the functions available during programming via the interactive keys. During setting: The display shows the setting selection:
The second line shows the functions available during setting via the interactive keys.
8 * Depending on the features available through your system operator
Using the interactive keys
The display comprises one line of information and a second showing the functions available through the interactive keys. Each function shown on the second line of the display is assigned to an interactive key. Note: in some cases, some interactive keys may not be assigned to any function.
PE2:00 Comm PE1:00 INT: 00 Status Funct. TL:01
. To invoke a function, press the interactive key associated with the desired function (Comm, for example). In certain cases, the number of functions available can be greater than five.

-->

. To invoke subsequent functions, press the interactive key --> or More. To invoke preceding functions, press the interactive key <--. At any time,. to return to previously display, press Previous,. to return to idle display, press Content.

<--

Previous Content
Dialling methods Dialling methods
Your M760E enables you to use a variety of dialling methods to fit in with your activities. These features complement the conventional handset method (or discreet method): off-hook the handset to answer or dial a call, and hang-up the handset to end the call.
Using the hands free mode
The hands free feature lets you dial or answer a call without lifting the handset. During a call, you can switch from hands free mode to handset mode, and vice versa. Caution: when a micro-headset is connected to a set, micro-headset mode replaces hands free mode. Answering a call:

PUBLIC EXCHANGE 1

Switching from microheadset mode to hands free mode:
Switching from microheadset mode to supervision mode:
While holding a conversation in micro-headset mode, - another person can lift the handset to supervise the conversation and can hang up at any time. The conversation continues in micro-headset mode.
- Press the red key. The call is terminated and the lamp associated with the goes out.
Using the loudspeaker mode
Loudspeaker mode lets you listen to a correspondent through the loudspeaker and thereby allow other people to take part in the conversation. Enabling loudspeaker mode: When you are in discreet mode (handset off-hooked), - Press the key. The conversation will be broadcast over the loudspeaker. The lamp associated with the key blinks and then illuminates steadily. - Press the key again. The conversation will continue in discreet mode. The lamp associated with the key goes out.
Disabling loudspeaker mode:
Adjusting the listening volume
You can adjust the listening volume (8 levels), according to the mode used (handset, hands free, micro-headset or loudspeaker mode). - Press the or keys consecutively to raise or lower the volume. The last setting is stored by the telephone set (except for the micro-headset mode: return to middle level for the next call).
Using the prenumbering mode
The prenumbering mode enables you to enter and view a number so that you can edit it if necessary before dialling it (this mode is advantageous for dialling long numbers, such as international numbers).

Comm Prenum

1 - Press the Comm interactive key, 2 - Press the Prenum interactive key. 3 - Dial the number of your correspondent. The number dialled is shown as it is entered.

Erase Call

. If you make a mistake, press Erase and re-enter the number. 4 - Press the Call interactive key to make the call. When the person you are calling answers, you can hold a conversation.
Calling by name a correspondent listed in the internal or external directories*

If you don't know the number of an internal or external correspondent, you can retrieve the number by entering the correspondent's name via the alphabetic keypad.

Comm Int. Name

1 - Press the Comm interactive key. 2 - Press the Int. Name interactive key (or press the --> interactive key and then press the Ext. Name interactive key). 3 - Enter the first letters of the correspondent's name via the alphabetical keypad. If you need to correct what you enter, press the Erase interactive key. 4 - Press the Consult interactive key. If you're not sure how the name is spelt, press the Phonet* interactive key. The display suggests a name or shows the number of possibilities. Press the Next interactive key as many times as necessary until the desired name is displayed. Press the Previous interactive key to return back. If necessary, press the Correct interactive key to resume entering letters. 5 - Press the Call interactive key to dial the correspondent displayed. The telephone set automatically dials the number. When the correspondent answers, you can hold a conversation.

name xx

Consult Phonet

Next Previous Correct

Calling an abbreviated number*
You can save time by using the collective abbreviated numbers. These numbers can be programmed from the attendant console and are available to all subscribers (see Attendant set services - Programming and managing the system). When in idle mode or during a call, 1 - Press the interactive key.
2 - Enter an abbreviated number (3xxx). The telephone will dial the number automatically. When the correspondent answers, you can hold a conversation.
* Depending on the features provided by your system operator 13
Using the attendant console Using the attendant console
When disabled, the attendant console has no telephone functions. However, depending on the features provided by the system operator, a disabled attendant console may receive or make call. Please consult your system operator for more information. Note: an M760E disabled in attendant mode cannot perform the functions of a digital telephone (directories, call logs.).
Enabling/disabling the attendant console
Enabling the attendant console: When the attendant console is disabled, the display shows a message to remind you that the function is disabled and the lamp associated with ON / OFF key is on steady. 1 - Press the ON / OFF programmed key. The display asks you for confirmation. 2 - Press the Confirm interactive key. The lamp associated with ON / OFF key goes out. The display shows the information and features needed to manage the attendant function (detailed hereinafter).

Answering an internal call: The display tells you when you receive an internal call:
PE2:00 Comm PE1:00 Status INT:01 Funct. TL:00 More

SERVICE LINES

The lamp associated to the SERVICE LINES key blinks. - Press the SERVICE LINES programmed key to take the call. The associated lamp goes out, unless another external call has been received.
A communication circuit is then enabled and the associated supervision key lamp switches to steady (e.g.: CCO2 programmed key). The display will show you information on the origin of the call*:. the callers name or number,. the name of the company or department.
Answering a tie line call:
The display tells you when you receive a call from a tie line:

PE1:00 Status

INT:00 Funct.
The lamp associated to the TIE LINE key blinks.
- Press the PUBLIC EXCHANGE 2 key to take the call. The corresponding lamp will go out, unless another local call has been received. A communication circuit is then enabled and the associated supervision key lamp switches to steady (e.g. CCO3 programmed key). The display will show you information on the origin of the call*.
* Depending on the features provided by your operator
Answering a return call*: You have forwarded an external call to an internal set. This call has not been answered and is returned to you.
PE2:01 Comm PE1:00 Status INT: 00 Funct. TL:00 More

PUBLIC EXCHANGE 2

The lamp associated to the PUBLIC EXCHANGE 2 key blinks. - Press the PUBLIC EXCHANGE 2 key to speak to the caller. The associated lamp goes out, unless another local call has been received. A communication circuit is then enabled and the associated supervision key lamp switches to steady (e.g. CCO4 programmed key). The display will show you information on the origin of the call*:. the type of return (Public exchange - TL). the name/number of the person who did not answer the call,. the number of the company and the department,. the reason for the return (do not disturb - no answer - engaged - unavailable - transferred - not listed - blocked). Notes: - Depending on the settings (see Settings), an incoming call may trigger a beep timed to coincide with the flashing key lamp. - Pressing one of the PUBLIC EXCHANGE keys puts the call in progress on hold. - Pressing the CCO key with the blinking lamp recovers a call waiting.

Managing overload:

The lamp associated to the OVERLOAD key informs about arriving of one or more no answered calls: - first level overload: the key lamp switches to steady. - second level overload : the key lamp blinks. Note: this overloads start up after a given time. Please consult your system operator to adjust this time to suit your requirements. Press the OVERLOAD key to display the waiting calls.

Making a call

You can dial on the keypad, use the Comm interactive key or use the customizable keys to make a call (see Dialling methods). This will automatically result in a dual call if another call is already in progress. Calling an internal correspondent: To call an internal correspondent, - Dial the correspondents extension number. The correspondents name is displayed*. To call an external correspondent, 1 - Dial the access code for obtaining an external line (0 by default). 2 - Dial the correspondents number. The number dialled is shown on the display. When the correspondent answers, you can hold a conversation. Your telephone sets free programmable keys can be assigned to the phone numbers of (internal or external) correspondents that you call on a regular basis. - Press the programmed key. The correspondents number is dialled automatically. The display shows the number of the correspondent called. When the correspondent answers, you can hold a conversation.

Ending a call

- Press the red key. If the set is in hands free mode, the lamp goes out. The correspondent is released and the call ended. Note: when the attendant console returns to idle mode following a call, the display remains clear for a few seconds. However, the attendant console continues to function normally and any operations (such as answering a call) are registered.
Attendant console services Attendant console services
The attendant console features a number of services that you can customize.

Funct. Server

1 - Press the Funct. interactive key. 2 - Press the Server interactive key. The display shows the first available heading. - Press successively the More interactive key to display the other headings. 3 - Press the Access interactive key when the display shows the heading you want. When consulting a record, - press Previous to go back to the beginning of the heading, - press Content to go back to the list of headings.

Access

Reserving external lines*
This feature allows you to reserve several external lines for outgoing calls from the attendant console*. Note: this function can also be accessed using the LINES RESERVED programmed key (see Description). When you have accessed the EXTERNAL LINE RESERVATION heading.

Reserv

To reserve a line - Press the Reserv interactive key. To cancel a reserved line - Press the Cancel interactive key. Note: use the mode. red key to end a sequence and return to idle

Cancel

LINES RESERVED
You can access this menu directly from idle mode by pressing the LINES RESERVED key. The associated lamp key switches to steady to remind you that the line is reserved.
* Depending on the features provided by your system operator 25
Attendant console services
Programming and managing the system*
This feature allows you to: - program abbreviated numbers (available to all system users), - consult charges billed to an extension, - manage limitation mode, - set the date and time. Once you have accessed the SYSTEM MANAGEMENT heading. Programming abbreviated This feature is used to manage the installation abbreviated collective numbers: numbers. To enter a new abbreviated number:

Abbrev# Create

1 - Press the Abbrev# interactive key. 2 - Press the Create interactive key. The display shows the first available number. To display the next free number, - press the Next interactive key. 3 - Press the Modify interactive key. The display asks you to enter the number. 4 - Enter the correspondents number (preceded by the code needed to obtain an outside line, where applicable (0 by default). Press the Erase interactive key to correct an error.

Modify

5 - Press the Enter interactive key. The display asks if you have finished entering the entire number. 6 - If the number is correct, press the Yes interactive key. If the number is that of a company which uses direct selection on arrival, you may choose to enter only the fixed part of the number. You will need to: - press the No interactive key, then - enter the following numbers then press the Enter interactive key, - alternatively, press the Open interactive key if the number may vary. 7 - Use the alphabetical keypad to enter the extension Wording (e.g. name of the correspondent or company). Press the Erase interactive key to correct an error.
* Depending on the features provided by the system operator

Wording

8 - Press Enter when you are finished. The display shows the number programmed. You may also use Modify and Cancel to change or delete the number shown. To consult the abbreviated numbers programmed: 1 - Press the Abbrev# interactive key. 2 - Press the See interactive key. 3 - Dial the extension number. 4 - Press the Enter interactive key. 5 - Press the Next interactive key consecutively to display the numbers. Note: use the red key to end the sequence and return to idle mode.

Abbrev# See

Enter Next
Consulting charges billed to an extension:
This feature is used to see the number of billing units charged by the network operator to a given extension since the billing counters were last reset. 1 - Press the Invoice interactive key. The display asks you to enter the number of the extension for which you wish to check the number of units used. 2 - Enter the extension number. Press the Erase interactive key to correct an error.

Invoice

3 - Press the Enter interactive key. The display shows the counter and the date it was last reset. To reset the counter: - press the Cancel interactive key, then - press the Yes interactive key to confirm. Note: the password is required only for the first cancel operation, as long as you are still in the Invoice menu. You can obtain this password from your system operator. To check another extension: - press Other. Note: use the mode. red key to end the sequence and return to idle

Cancel Yes

Managing limitation modes: User entitlements on the system may vary according to the time of day. Example: extensions may be authorized to make international calls during the day, but only local calls at night or on weekends. This means that the system can be set to operate in one of the given modes. 1 - Press the Timetab. interactive key. The display asks you to enter the operating mode. 2 - Press the Day or Night interactive key (e.g. Night). The display will confirm the selected limitation. Note: use the mode. red key to end the sequence and return to idle

Timetab.

Setting the system date:
This feature is used to change the date programmed in the system. 1 - Press the Date interactive key. The display asks you to enter the new date. 2 - Enter the new date (e.g. 12072001 for July 12 2001). 3 - Press the Enter interactive key when you are finished. The display shows the date programmed. The change the date: - press the Modify interactive key. You can also change the time by pressing the Time interactive key (see below). Note: use the mode. red key to end the sequence and return to idle

DDMMYYYY

Setting the system time: This feature is used to change the time programmed in the system. 1 - Press the Time interactive key. The display asks you to enter the new time. 2 - Enter the new time (HH MM SS format, i.e. hour, minutes and seconds) and press Enter when you are finished. You can also go forward or back an hour by pressing the corresponding interactive key (+ 1H or - 1H). The display shows the programmed time.

HH MM SS

To change the time: - press the Modify interactive key. Note: use the mode. red key to end the sequence and return to idle
Using the hotel function*
This feature is used to access to a range of features linked to a given room or customer. - declaring an arrival, - declaring a check-out, - programming a wake-up call, - declaring a phone box. Important: if you frequently use these functions, your system operator can assign programmed keys for direct access to each function. When you have accessed the HOTEL MANAGEMENT heading.

Declaring an arrival:

Arrival
This feature is used to open access to the public phone network for a telephone in a room. 1 - Press the Arrival interactive key. The display asks you to enter the rooms extension number. 2 - Enter the extension number. Press the Erase interactive key to correct an error.
3 - Press the Enter interactive key. The display confirms the operation and asks you if you wish to declare another arrival. Note: use the mode. red key to end the sequence and return to idle

Declaring a check-out:

Depart.
This feature is used to bar access to the public phone networks from a telephone in a room. 1 - Press the Depart. interactive key. The display asks you to enter the rooms extension number. 2 - Enter the extension number. Press the Erase interactive key to correct an error.
3 - Press the Enter interactive key. The display shows you the cost (in the local currency) of the calls made from the room since the guest arrived. To display the cost in euros: - press the Euro interactive key. Press the Change interactive key to again display the cost in the local currency. To print out a copy of the calls made: - press the Ticket interactive key. To close the rooms account: - press the Confirm interactive key. The display asks you if you wish to declare another check-out. To cancel the check-out declaration: - press Cancel. Note: use the mode. red key to end the sequence and return to idle

Ticket

Programming a wake-up call:

Wake-up

This feature is used to programme a wake up call for a given room. 1 - Press the Wake-up interactive key. The display asks you to enter the rooms extension number. 2 - Enter the extension number. Press Erase to correct an error.

Enter Activ.

3 - Press the Enter interactive key. 4 - Press the Activ. interactive key. 5 - Enter the required wake-up time (HH MM, i.e. hours and minutes). Press the Erase interactive key to correct an error. 6 - Press the Enter interactive key. The display confirms the programmed wake-up time. To change the wake-up time: - press the Modify interactive key. To cancel the wake-up call: - press the Cancel interactive key.
To programme a wake-up call for another room: - press the Next interactive key.
The extension will ring at the programmed time.

Note: use the mode.

red key to end the sequence and return to idle
Declaring a phone box: This feature is used to temporarily authorise calls from a phone box managed by the attendant console. 1 - Press the Phonebox interactive key. The display asks you to enter the phone number. 2 - Enter the extension number for the phone box. Press Erase to correct an error. The display asks if you wish to assign the phone box to a guest or only use it temporarily.

Phonebox

3 - Press the Guest interactive key, for example. The display asks you to enter the guests extension number. 4 - Enter the guests extension number. Press the Erase interactive key to correct an error.
5 - Press the Enter interactive key. The cost of calls made is automatically billed to the room account. If the phone is for temporary use only, you have to press the Visitor interactive key. A few moments after the call has ended, the attendant console will ring. You have to press the SERVICE LINES programmed key. The display shows the cost of the call in units: CALLBACK PHONEBOX XXX COST XXXXX UNITS. Caution: In both cases and depending on the features provided by the system operator, the phone box cannot be used again for external calls until it has again been activated from the attendant console. Note: use the mode. red key to end the sequence and return to idle

Displaying calls*

This feature is used to check the status of an extension and to see internal and external extensions in a given call. When you have accessed the DISPLAY COMMUNICATIONS heading.

Phone bk

1 - Press the Phone bk interactive key. 2 - Enter the extension number for which you wish to obtain information. Press the Erase interactive key to correct an error.
3 - Press the Enter interactive key. The display shows the status of the extension. If the extension is in use: The display shows the internal or external correspondent (provided they are connected to the digital network) on the other end of the line. Press the Distant interactive key. The display shows the previous entered extension number. Note: the Port interactive key is for system operator use only. If the extension is not in use: The display confirms this status.

Distant

To select another extension: - press the Other interactive key. Note: use the mode. red key to end the sequence and return to idle
Displaying the status of trunk lines*
This feature is used to display the status of trunk lines and is more specifically designed for system operator use. The display shows DISPLAY STATUS OF TRUNK LINES.
Monitoring grouped lines*
This feature is used to display calls made for a group of extensions. You can obtain the numbers called from your system operator. When you have accessed the GROUPED LINE SUPERVISION heading. The display asks you to enter the grouped line number. 1 - Enter the grouped line number for which you wish to obtain information. Press Erase to correct an error.
2 - Press the Enter interactive key. The display shows the number of calls waiting. For more information: - press the More interactive key. The display shows the time before return call to the attendant console. To display the status of another group: - press the Previous interactive key and proceed from step 1. Note: use the red key to end the sequence and return to idle mode.

Previous

Notifying a corespondent
This feature (also available during a call, see Using the attendant console), is used to send a short message to a corespondent, provided he/she is connected to a digital interface. In idle mode, 1 - press successively the Funct. and Notify interactive keys. 2 - Enter the number of the correspondent you wish to notify then press the Enter interactive keys. The display shows the first 6 predefined messages. 3 - Use More to select another predefined message. According to your choice, you will need to complete the message shown or enter a free message on the alphabetical keypad. Press the Erase interactive keys to correct an entry. 4 - Press the Enter interactive keys to send the message. The display will confirm that the message has been sent.

Funct. Notify

Enter More

Erase Enter

The programmable keys The programmable keys
You may call certain correspondents or colleagues several times per day. Or maybe you make frequent use of certain telephone features such as call forwarding or supervision. Your sets programmable keys will allow you to store these numbers or functions for easy access to the available services. Notes:. If your set does not have an extension module, you can customize six keys not dedicated to attendant console functions. If your set uses one or two extension modules*, you can customize and use the additional keys in the same manner.

Programming a key

Whatever the type of programming used (number or function), the access procedure is the same. 1 - Press the Funct interactive key. Funct

Program

2 - Press the Progam interactive key. The display shows WHAT DO YOU WANT TO PROGRAM ?. 3 - Press the Key interactive key. The display asks you to select a programmable key.
4 - Press a programmable key. The lamp associated with this key illuminates steadily, and the display shows the programming status of the said key.
5 - Press the Modify interactive key.
WHAT DO YOU WANT TO PROGRAM? Number Feature Superv. Filter Tone
During the programming procedure, the lamp associated with the key flashes. You have access to various types of programming, which are explained briefly below. You are recommended to refer to the sections that cover these functions in depth, for more information about the features available to you.

The programmable keys

Programming a number:

Number

You can program the telephone number of an internal or external correspondent. 1 - Press the Number interactive key. The display prompts you to enter the number. 2 - Enter the correspondent's number, without forgetting to enter the access code to an external line in the case of an external correspondent (0 by default).
. If you make a mistake, using the Erase interactive key. 3 - Press the Enter interactive key to accept the programming. The display shows the programming. You can now call this correspondent simply by pressing this key.

Programming supervision:

Suppose you wish to program the supervision feature for another extension or your own extension (multikey and multiline functions).* 1 - Press the Superv. interactive key. The display prompts you to select a supervision (mailbox, extension number or external number). 2 - Press the Extens. interactive key, for example. The display prompts you to supervise your extension or another extension. 3 - Press the Yes interactive key to supervise another extension, for example. The display prompts you to enter the number of the extension that you want to supervise. 4 - Enter the extension number and then press the Enter interactive key. The display prompts you to select the manner in which the supervised extension will notify you.

Superv.

Extens.
5 - Press the Mute interactive key. The display shows the programming. This way, the lamp associated with the programmed key will inform you about telephone usage by the co-worker concerned, and you will be able to call the correspondent by simply pressing the key.
Programming a series of codes:
This involves programming a series of codes that will be interpreted by the set during the progress of a call. You can, for example, program the sequence for access to a server. 1 - Press the Tone interactive key. The display prompts you to enter the code. 2 - Enter the Sequence. Example: enter the access code to a server followed by #. If you make a mistake, use the Erase interactive key. To insert a pause between two series of codes, press the Pause1 or Pause2 interactive keys*.

sequence

3 - Press the Enter interactive key to accept the programming. The display shows the programming. This way, simply pressing this key when using the set during a call will provide you with all expected information and will give you fast access to the expected service.
Deleting, modifying and exiting programming
After having programmed a key, The display shows the programming status of this key, and will give you various possibilities.
- Press the Erase interactive key to erase the programming shown.
* Depending on the features provided by your system operator 37
- Press the Modify interactive key and resume programming as explained above, in order to modify the programming displayed. - Press the <- Start interactive key to resume at the beginning, in order to program another key. - Press the End interactive key to exit programming mode. Reminder: during programming, - pressing the red key aborts the setting in progress; - two keystrokes on the red key terminates the programming sequence.

<- Start

Identifying programmed keys
The paper label enables you to mark the names of correspondents or functions programmed on each group of 10 keys. Caution: use the specific attendant label; the name of programmed user keys are printed. 1 - Remove the transparent cover over the label, by lifting the bottom of the label (insert a pointed object into each notch one after the other). Label 2 - Write the name of the programmed correspondent or function on the label, next to the key. 3 - Refit the transparent cover in position.

Choosing the incoming call signalling method
During a call, you can choose to use a beep to tell you when you receive a new incoming call.
1 - Press the Funct interactive key. 2 - Press the Program interactive key. The display shows WHAT DO YOU WANT TO PROGRAM?. 3 - Press the Signal interactive key. The display shows the signalling status: activated or deactivated. 4 - Press Modify interactive key. The display shows the new signalling status for incoming calls. Depending on the settings, an incoming call triggers a beep and the lamp flashes.

Signal

Adjusting the key beep volume
Each time a key is pressed, a beep is given. The volume of this beep can be adjusted to 8 levels. The lowest level corresponds to elimination of the beep. With the set idle, - Consecutively press keys or to decrease or increase the key beep volume. Each time pressed, the new setting is broadcast. The last setting made remains stored by the set.
Miscellaneous Miscellaneous

Glossary (words to know)

Conference call Digital Call between three parties, using a call between two parties. A set with access to ISDN network services is called a digital set. This is the shared directory of the names of internal correspondents recorded in the system by the system operator.
Directory of internal names
Directory of external names This is the shared directory of the names of external correspondents recorded in the system by the system operator. Directory of collective abbreviated numbers External line Hands free This is the directory of collective abbreviated numbers recorded in the system by the user of the set. Public switched network Telephone mode in which calls can be made or answered without picking up the handset. All sets associated with a given group and authorized to intercept calls intended for this group. Automatic tie line directly connects a site in a company to another site.

Intercept group

Tie Lines

Miscellaneous

A problem? Check
Fault No display Possible causes Check that the set is connected to the line (line tone in the handset). Check the connection cord to the line. Check that the other sets in the system are working. Check the setting of the display contrast.