eud-1048_en.book Page 1 Monday, March 22, 2010 4:25 PM
Aastra Communications Systems
Aastra 800 Aastra A150 IntelliGate Aastra IntelliGate OpenCom 100 A300 OpenCom 100 Aastra OpenCom 1000 BusinessPhone 2045 BusinessPhone MX-ONE 2065
Aastra Mobile Client: Fixed Mobile Convergence Mobile phones on Aastra communications systems single mode (AMC 1.5 and AMC 2.0) Users Guide
eud-1048_en.book Page 2 Monday, March 22, 2010 4:25 PM

Content

Welcome to Aastra. 4
Overview. Fixed Mobile Convergence. Introduction. User information. Disclaimer. Trademarks. Mobile operating system. Aastra communications system. System and Software-related functions. Document information. 7 7
When starting the Aastra Mobile Client application. 8
Installation for Symbian-based and Android-based[a] devices. 8 Installation for BlackBerry devices. 9 General settings of the mobile phone. 10

Operation. 11

Starting, minimising and ending the Aastra Mobile Client. 11 Answering calls. 11 Making calls. 12

Enhanced Operation. 13

Telephony Functions. 13

AMC Settings. 16

Automatic Start. Auto Login. Keypad autolock. User PIN. Fast Forward Number (only MX-ONE). Dial Mode. Voice Mail. Language. Configuration of exception numbers (or GSM service numbers)[a]. 18
AMC Function Icons on Home Screen. 19
Call list. Voice Mail. Profiles. Contacts. Synchronizing your contacts. SMS access. 22 22
eud-1048/2.0 AMC v1.5/v2.0 03.2010
eud-1048_en.book Page 3 Monday, March 22, 2010 4:25 PM
Mobile Least Cost Routing (Optional). 23
Automatic HTTPS callback function (MX-ONE only).23 Call through (DTMF).24 Travel SIM function (optional) (MX-ONE only).24 SIM Switch Number.24

Index. 25

eud-1048_en.book Page 4 Monday, March 22, 2010 4:25 PM

Welcome to Aastra

Thank you for choosing this Aastra product. Our product meets the strictest requirements with regard to quality and design. The following user's guide will assist you in using the Aastra Mobile Client application and answer most of the questions that may arise. If you require further technical support or information about other Aastra products, please refer to our website at http://www.aastra.com. It provides additional notes and tips on the product.

Overview

The Aastra Mobile Client brings system telephony features to your mobile telephone. It takes just a few steps to install, and can be used immediately and conveniently without spending too much time time learning it.

Fixed Mobile Convergence

Fixed Mobile Convergence (FMC) is the integration of mobile telephones into the fixed-line communications system of a company. The Aastra Mobile Client software (AMC) allows you to access the Aastra communications system services from your mobile phone, enabling complete integration with the communications system as a normal extension. Use your mobile phone at the Aastra communications system the familiar communications environment accompanies you around the world and is always available. Switch at any time from mobile telephone to system telephone even in the middle of a call. Depending on the situation, select the mobile telephone or stationary system telephone accessible worldwide with the best audio quality. Be always accessible with one single number free people calling you from having to keep track of several network and call numbers.
eud-1048_en.book Page 5 Monday, March 22, 2010 4:25 PM

Introduction

User information
This user's guide describes the Aastra Mobile Client application. You will find the users guide and other documents for your application at http://www.aastra.com or http://www.aastra.com/ docfinder. For more information please refer to the documentation or to your dealers homepage. It is your responsibility to inform yourself about the scope of functions, operation and proper use of your equipment. Check whether you have all the user information available on your product, whether it conforms to your products version and whether it is up to date. Read through the user information carefully before using the Aastra Mobile Client. Store the user information within easy reach and refer to it whenever uncertainties arise in connection with the use of the application. If individual features differ on the Aastra communications systems, a reference is made in this users guide.

Disclaimer

This product was manufactured in accordance with ISO 9001 quality guidelines. This product and the user information belonging to it have been produced with the utmost care. The products functions have been tested and approved after comprehensive conformity tests. Nonetheless errors cannot be entirely excluded. The warranty is limited to the replacement of defective hardware. The manufacturers shall not be liable for any direct or indirect damage that may be caused by incorrect handling, improper use, or any other faulty behaviour on the part of a product. Potential hazards are mentioned in the relevant places in the user information. Liability for loss of profit shall be excluded in any case.

Trademarks

The designations used in this manual for software and hardware are registered trademarks and are thus subject to the relevant regulations. Aastra, Aastra 800, Aastra 5000, Aastra IntelliGate Series, Aastra 400 Series, BusinessPhone, MX-ONE, OpenCom 100, and OpenCom 1000 are registered trademarks of Aastra Technologies Limited.
eud-1048_en.book Page 6 Monday, March 22, 2010 4:25 PM

Mobile operating system

The Aastra Mobile Client software is availabe in two versions: Single mode (Aastra Mobile Client 1.0 and Aastra Mobile Client 2.0) and dual mode (Aastra Mobile Client Plus 2.0). You will find the users guide and other documents for dual mode at http://www.aastra.com or http:// www.aastra.com/docfinder. Aastra Mobile Client version 1.5 (single mode) is running on mobile phones using the following telephony operating systems: Symbian S60 3rd Edition (Symbian was created with the aim of developing and standardizing an operating system that enables mobile phones from different manufacturers to exchange information), BlackBerry (RIM OS). Aastra Mobile Client version 2.0 (single mode) is running on mobile phones using the following telephony operating systems: Symbian S60 3rd Edition, Symbian S60 5th Edition (touchscreen phones), BlackBerry (RIM OS), Android.
Note: The Aastra Mobile Client licence depends on the mobile phone type and the mobile phone number. This means that you need to have a renewal licence when you either change your mobile phone and/or your mobile phone number. Contact your system administrator for more information.
Aastra communications system
Aastra Mobile Client version 1.5 (single mode) is running on the following Aastra communications systems: Aastra 800 Aastra IntelliGate BusinessPhone MX-ONE OpenCom 100 OpenCom 1000
Aastra Mobile Client version 2.0 (single mode) is running on the following Aastra communications systems: MX-ONE
eud-1048_en.book Page 7 Monday, March 22, 2010 4:25 PM
System and Software-related functions
Some systems or system versions do not support all the features. The corresponding text sections are identified by a letter inside square brackets [a]. The list below indicates which system versions support the relevant features. For more information contact your system administrator.

AMC 2.0 [a] [b] [c] [d] x

Document information

Document number: eud-1048 Document version: 2.0 Valid as of: AMC v1.5/v2.0 Copyright 03.2010 Aastra Technologies Limited In PDF Viewer, click on this link to download the latest version of this document:
https://pbxweb.aastra.com/doc_finder/DocFinder/eud-1048_en.pdf?get&DNR=eud-1048
eud-1048_en.book Page 8 Monday, March 22, 2010 4:25 PM
When starting the Aastra Mobile Client application
Your system administrator has already everything prepared. You begin with these steps:
Installation for Symbian-based and Android-based[a] devices
1. You receive three or four1) SMS messages on your mobile phone. The messages contain the download address, configuration data and licence. Open the SMS message containing the download address. 2. Select the internet address and call the linked internet pages with the Download message command. Confirm the internet access. 3. Follow the steps in the download wizard. Confirm the settings and begin downloading via Agree and download now. 4. After downloading, confirm the software installation. Then launch the installed software from the mobile phones user interface. 5. When starting, the application searches the SMS messages received for the configuration and licence. It automatically downloads the information in the messages. After a restart of the application the Aastra Mobile Client is ready for use.
Depending on the Aastra communications system the Aastra Mobile Client is used with.
eud-1048_en.book Page 9 Monday, March 22, 2010 4:25 PM
Installation for BlackBerry devices
Note: Depending on the enterprise server you use, the installation may differ. Please contact your system administrator for more information. 1. You receive three or four1) SMS messages on your mobile phone. The messages contain the download address, configuration data and licence. Open the SMS message containing the download address. Depending on the mobile phone you might receive an e-mail in place of the SMS. 2. Select the internet address and call the linked internet pages with the Get link command. 3. Follow the steps in the download wizard. Confirm the settings and begin downloading via Agree and download now. 4. After downloading, confirm software installation. 5. When you start the Aastra Mobile Client for the first time, the operating system will indicate that the application is attempting to access telephone information. Select Do not ask me again and accept. 6. It will then show you the permissions lists of the Aastra Mobile Client. Both settings (Interactions and Injection) should be set to Allow. Save the settings. Note: Please contact your system administrator if you need more information. 7. a) When you are starting the Aastra Mobile Client you will have to activate the licence and configuration SMS, if not done already. To do so open your inbox, highlight the relevant SMS and select the menu item Activate licence/configuration. Once you have done so for both SMS messages you will have to restart the Aastra Mobile Client. The Aastra Mobile Client is now ready for use. b) If the licence has expired you will receive a pop-up message. Click the red key to minimise the application in the background. Then open your inbox, highlight the licence SMS and select the menu item Activate licence/configuration. Once the licence has successfully been activated, the Aastra Mobile Client will automatically be closed. Restart you the Aastra Mobile Client. It is now ready for use.

eud-1048_en.book Page 10 Monday, March 22, 2010 4:25 PM
General settings of the mobile phone
Some functions of the mobile communications network may interfere with operating your mobile phone at the Aastra communications system. You need to deactivate the following mobile carrier functions: As long as you have activated your voice mail in your local enterprise voice mail system, switch off all call forwardings directed to the mobile networks voice mail. Switch off automatic announcements which are replayed if your mobile phone is not reachable. Switch off SMS messages which may be sent when you have missed calls. Usually you manage call forwardings in the mobile network with the mobile phones user interface. Please refer to the user's guide of your mobile phone for details. Announcements or automatically sent SMS messages can possibly be deactivated by your mobile network operator only.
eud-1048_en.book Page 11 Monday, March 22, 2010 4:25 PM

Operation

Starting, minimising and ending the Aastra Mobile Client
When you launch the Aastra Mobile Client from your mobile telephone, the regular telephony software installed by the mobile telephone manufacturer is simultaneously active. You can switch back and forth between the programmes. To make switching convenient, you should create a one-touch key or a desktop link for the Aastra Mobile Client. Please refer to the user's guide of your mobile phone for details.
To start the application on: Android: Click the Aastra Mobile Client icon in the main menu. BlackBerry: Click the Aastra Mobile Client icon in the main menu. Symbian: Open the Aastra Mobile Client in the installations folder or click the icon you have configured. To keep the Aastra Mobile Client active in the background: BlackBerry: Press the back key. This is also supported in an active call. Symbian: Press the red key. This can only be done when there is no active call. To close the Aastra Mobile Client: In the Options menu select the Exit command. Note: The Aastra Mobile Client software should be active at all times and only be exited in special cases.

Answering calls

A call to your system telephone extension is signalled on your mobile telephone after a brief delay as well. The Aastra Mobile Client shows the number of the calling party on its display. This is also the case if the application is minimised and running in the background.
1. Call numbers are always displayed in the international format (+44.). If there is a matching entry in the phonebook of the mobile phone, the relevant name will be displayed as well. 2. BlackBerry: You can answer calls via the standard operating procedures of your mobile phone or via Menu key > Answer. Symbian: You can answer calls via the standard operating procedures of your mobile phone or via Options > Answer. Note: Depending on the subscription type, a caller number might not be displayed in all calling cases. If the caller number is hidden, the communications systems main phone number might be displayed.

eud-1048_en.book Page 12 Monday, March 22, 2010 4:25 PM

Making calls

Please note that the Aastra Mobile Client call setup time lasts slightly longer than the normal mobile call setup time. To make an internal call, dial the internal call number of the person you wish to call. To make an external call, dial the external call number of the person you wish to call in canonical format (+44.) or dial the systems exchange access code followed by the call number. All external calls you make via Aastra Mobile Client are routed through the Aastra communications system. This means that your mobile phone calls the communications system, which routes your call further to the person you are calling. So, only the cost of connecting to the communications system is charged to your mobile phone. Your call will be presented to the called party with your office dial through number. If you do not wish to make external calls via the communications system (e.g. private calls), you must first make sure that the Aastra Mobile Client is set to dual identity mode in the Aastra Mobile Client settings menu and then minimised, and that the phones native menu is in the foreground, before dialling the call number. You can also make calls directly from the call list or from the stored contacts.
Note: Call numbers that are not saved in canonical format or are saved without exchange access code will be interpreted as internal call numbers. Therefore, make sure that you save the call numbers of your external contacts in canonical format (E.164 format) (+44.).
eud-1048_en.book Page 13 Monday, March 22, 2010 4:25 PM

Enhanced Operation

Telephony Functions
You have various telephony functions available as for example Enquiry or Conference. Contact your system administrator for more information or read the users guide. You will find the users guide and other documents for your application at your dealers homepage. The Aastra Mobile Client offers menu-controlled access to system telephony functions. There are two types of functions at your disposal: Out-call services, as for example Activating Call forwarding, and In-call services, as for example Enquiry.
1. BlackBerry: Press the BlackBerry key. The Functions menu opens. The content of this menu depends on the current call status. Press the Home softkey or the back key to exit the menu without selecting a function. Symbian: Select the Functions command in the Options menu, or go to the icon as pictured and press the select key. 2. Use the navigation keys to select the function you want. Activate the selected function with the select key or with the OK softkey. The function is executed. If you are not in an active call, a connection to the Aastra communications system is established. The requested function is subsequently transmitted using DTMF tones.

The following tables explain the available functions. Please note that not all functions mentioned are supported by all Aastra communications systems. These functions are separately marked in the table.
eud-1048_en.book Page 14 Monday, March 22, 2010 4:25 PM
In-call services: Function Blind Transfer
Explanations Transfers the active call directly to a third party. You can either enter a phone number or choose to open the contacts view. The first call will disappear from the home screen as soon as the other party accepts the transferred call. During an enquiry call, toggles between the caller on hold and the enquiry caller. Send call waiting indication to busy caller: While busy tone is signalled select Call waiting. Saves a callback request when the caller you want is busy. Initiates a three-way conference with the enquiry caller and the caller on hold. See Enquiry. Parks your current call. The person on the parked call hears music on hold. Enter the call number and confirm with the select key or with the OK softkey to conduct an enquiry call. Retrieves a call on hold. The enquiry call is terminated and you return to talking with the caller on hold. Will move the ongoing call to a predefined number (desk phone/softphone). Puts the ongoing call on hold. Calls on hold can be resumed on your own or on another phone. See Exit. See Brokering. Connects the enquiry caller and the caller on hold. If this feature is not offered connect the two calling parties by hanging up.
Brokering1) Call waiting1) Callback1) Conference Consultation1) Enquiry1)
Exit1) Fast forwarding1) Hold call1) Take back1) Toggle1) Transfer
Depending on the Aastra communications system the Aastra Mobile Client is used with. Out-call services: Function Absence Info Call pickup1)
Explanation The predefined absence info can be activated or deactivated by this function. Takes a current call from your system phone on your mobile phone (or vice versa): After a slight delay, you can continue the current call on your mobile phone. The Take number is configured in the Settings menu.
Call protect1) Call retrieve1) Call waiting protection1) Do not disturb1)
Prevents that calls are forwarded from the communications system to the mobile phone. Direct calls to the mobile phone number are not affected. Enables you to take a call from a waiting queue. Switches call waiting protection on or off: Select the setting you want in the menu which is activated after a brief delay. Activates/Deactivates the Do not disturb function after a brief delay. While the function is off, no calls are routed to your Aastra Mobile Client.

eud-1048_en.book Page 15 Monday, March 22, 2010 4:25 PM
Out-call services: Function Forwarding1) Explanation Configures or deletes a call forwarding: 1. Use the select keys to select the call forwarding type you want: Call forwarding: immediately Forwarding on No Reply: after time Forwarding if Busy: if busy Activate with the select key or with the OK softkey. 2. Select the destination you want in the next menu: User: a call number Voice Mail: the voice mail Forwarding off: turn off Activate with the select key or with the OK softkey. After a brief delay, the call forwarding configuration you want is activated on the communications system. Note: Depending on the Aastra communications system your system administrator is able provide you with further forwarding functions he can add in the feature file. Please contact you Aastra Mobile Client administrator for more information. Log on/Log off procedure for Master/Slave: With this simple procedure the slave can be set to Log on and Log off mode. During Log off mode the slave (AMC user) is blocked for incoming calls. Incoming calls will only be indicated on the master telephone. During this logged-off period it is still possible for the slave to set up a call. If the slave is logged on, incoming calls will be indicated depending on the configuration on both phones or only on the slave. Specify where incoming calls shall be routed to. Function only appears if the personal call routing is configured in the communications system for this user. Activates a Redkey function. Function only appears if the alarm key is configured in the communications system. See Call pickup.

Master/Slave1)

Personal call routing1) Redkey1) Take1) Time group
Switches the current time group: In the menu select the time group you want which is activated after a brief delay on the OpenCom 100 / Aastra 800 communications systems. Triggers a call to your voice mail: After a brief delay, you might get the voice mail request to enter your user PIN. Enter the PIN and then follow the voice mail operating instructions.

Voice Mail

eud-1048_en.book Page 16 Monday, March 22, 2010 4:25 PM

AMC Settings

Note: Some settings might be hidden depending on what was set in the Aastra Mobile Client admin settings menu via the SMS remote configuration.

Automatic Start

You can activate the automatic start function of your mobile telephone. The automatic start function launches the Aastra Mobile Client automatically when you switch on the mobile telephone.

1. Select the Settings command in the Options menu. 2. In the Settings menu, change the Automatic start option to the On setting. 3. BlackBerry: Press the Back softkey. Symbian: Select Save to exit the Settings menu. Note: The Aastra Mobile Client software should be active at all times and only be exited in special cases.

Auto Login

In the Settings menu change the Auto Login option to On to register the Aastra Mobile Client automatically to the communications system.

Keypad autolock

The keypad autolock is a function that automatically locks the Aastra Mobile Client display when it has been idle for a certain time. The Keypad autolock period is set in seconds in the Settings menu. Select the Lock keypad in the Options menu to lock the keypad manually.
eud-1048_en.book Page 17 Monday, March 22, 2010 4:25 PM

User PIN

When you change your user PIN on the Aastra communications system you will also have to change your preconfigured PIN on the Aastra Mobile Client if your communications system requires a PIN for the login.
1. Select the Settings command in the Options menu. 2. In the Settings menu, select the User PIN command. 3. Enter your new user PIN. 4. BlackBerry: Confirm it with Save. Symbian: Confirm with the OK softkey.
For the next outgoing call via your Aastra communications system the new user PIN is used for the login procedure, if the communications system requires a PIN.
Fast Forward Number (only MX-ONE)
The Fast forward number is the number used when requesting the fast forwarding function during an active call.

Dial Mode

In the Settings menu you may configure the Aastra Mobile Client in two different dialling modes: Dual Identitiy and Always Aastra MC. Dual Identity (Standard): Select this menu option if you want to use the Aastra Mobile Client to route outgoing calls via your Aastra communications system and to make direct mobile phone calls when the Aastra Mobile Client application is minimised. Dual identity mode is often used when you use your mobile phone for both business and private calls. Always Aastra MC: All outgoing calls are routed via your Aastra communications system, even if the Aastra Mobile Client is minimised and running in the background. During the dialling procedure the Aastra Mobile Client is automatically active. Note that emergency calls shall directly be placed from the mobile phone and not from the Aastra Mobile Client.

Voice Mail

The voice mail number of your company which is used to call and retrieve your voice mail messages.
eud-1048_en.book Page 18 Monday, March 22, 2010 4:25 PM

Language

The Aastra Mobile Client language is automatically set to the same language as set for the telephone. The language is defined in the Settings menu of your mobile phone.
Note: If the language set in the telephone is not supported by the Aastra Mobile Client software, English will be used as default language. Question marks will appear in front of words when using the application with a language not supported by your Aastra Mobile Client version. Contact your Aastra Mobile Client distributor to obtain the requested language file.
Configuration of exception numbers (or GSM service numbers)[a]
You are able to set the exception numbers in the Settings menu. Exception numbers are numbers that are not to be routed via the communiations systems, for example the number of the mobile voice mail in the operator network. Please contact your system administrator for more information.
eud-1048_en.book Page 19 Monday, March 22, 2010 4:25 PM
AMC Function Icons on Home Screen

Call list

The Aastra Mobile Client keeps a call list which entries you can use for your next call.
BlackBerry: When the Aastra Mobile Client runs in the foreground, the call list is directly on the display. Symbian: Select the Call list command in the Options menu, or go to the icon as pictured and press the select key. The call list is also displayed when you press the green call key without entering a call number.
The call list is displayed. The calls are either organised according to call type in three different folders or arranged in one call list in chronological order with the following symbols:
Call number dialled Received call Missed call
Using the options menu you can delete an individual entry or the entire call list.
eud-1048_en.book Page 20 Monday, March 22, 2010 4:25 PM
Your personal voice mail records voice messages from missed calls. The Aastra Mobile Client software then shows that a voice mail message has arrived.
Note: Aastra Mobile Client users of the MX-ONE communications systems receive an SMS for voice mail indication. 1. BlackBerry: Press the BlackBerry key then select and confirm the menu option Voice Mail. 2. Then open the menu and select Delete notificaiton and confirm with the select key or the OK softkey. The display of the notification is removed. 1. Symbian: Use the navigation keys to select the Voice Mails entry. Confirm with the select key. The Voice Mails menu opens. 2. Select the Listen command and confirm with the select key or with the OK softkey. You call your voice mail to listen to the new message. 3. Then open the menu and select Delete notifcation and confirm with the select key or the OK softkey. The display of the notification is removed. Note: You have possibly activated call diversion for your mobile call number, diverting the rejected calls to the voice mail of the mobile network operator. This could result in problems with this feature. In this case please contact your network provider and ask him to deactivate your voice mail to allow the Aastra communications system to manage this feature centrally for all your devices.

eud-1048_en.book Page 21 Monday, March 22, 2010 4:25 PM

Profiles

BlackBerry: As a BlackBerry user you can continue to use the mobile phones profile management. You therefore have to minimise the Aastra Mobile Client in the background. Please refer to the user's guide of your mobile phone for more details on your mobile phone profiles. Symbian: The Aastra Mobile Client permits direct access to the profiles saved on the mobile phone.
1. Select the Profiles command in the Options menu. Or go to the icon as pictured and press the select key. The list of profiles is displayed. Press the Home softkey to exit the list of profiles without making a selection. 2. Use the navigation keys to select the profile you want. Confirm with the select key or press the Options softkey. A menu of commands is displayed. The menu content depends on the functions of your mobile phone. 3. Select e.g. the Activate command to activate the settings of the profile selected.
eud-1048_en.book Page 22 Monday, March 22, 2010 4:25 PM

Contacts

The Aastra Mobile Client offers calls to contacts saved in the mobile telephone.
Select the Contacts command in the Options menu.
BlackBerry: You can also start your search in the Aastra Mobile Client by entering a contact name. If you are searching contacts using the BlackBerry graphical interface you can select a contact and open the menu using the BlackBerry key and select Aastra MC call. The call will then be established using the Aastra Mobile Client. Press the Home softkey or the Home key to exit the list of contacts without selecting anything. Symbian: You can also go to the icon as pictured and press the select key. The list of contacts is displayed.
Synchronizing your contacts
Since there are contact management applications provided by most mobile telephone providers (e.g. using Microsoft Outlook via a BlackBerry Enterprise Server, etc) this topic is not part of this users guide. For more information how to manage the synchronization of your contacts please refer to the users guide of your mobile phone. The required software is provided with most mobile phones or is available on the internet pages of the manufacturer.

SMS access

You can access the mobile phone SMS application via the Aastra Mobile Client home view. The receipt of a new SMS message is signalled in the Aastra Mobile Client client. Note that the SMS icon is only displayed with Aastra Mobile Client version 2.0.
Symbian: Select the SMS command in the Options menu.
eud-1048_en.book Page 23 Monday, March 22, 2010 4:25 PM
Mobile Least Cost Routing (Optional)
The Mobile Least Cost Routing function (Mobile LCR) minimises mobile roaming expenses by routing the call through the least expensive path. The logic is based on an LCR table managed by the system administrator via the Aastra provisioning portal and via the Aastra Mobile Client over-the-air provisioning system. Aastra Mobile Client uses the LCR to determine which call method is the most cost efficient for each call. The options are: Automatic HTTPS callback Call through Local call using Travel SIM The function is transparent to the user of Aastra Mobile Client, and works from any mobile network.
Automatic HTTPS callback function (MX-ONE only)
When you are abroad, it is usually less expensive to receive a call than it is making one. The Aastra Mobile Client solution automatically selects the least expensive method in each case. When you make a call, the call is established in the background. The Aastra Mobile Client sends the signals via the mobile phone data channel to the MX-ONE system. The HTTPS callback setup time might take longer than a call when you are at home and not making a roaming call. During the setup of the call a text is displayed, e.g. Waiting for Callback. If the Mobile LCR call setup fails, Aastra Mobile Client makes a direct mobile call and the Mobile LCR is deactivated during the call. The reason for a failed call connection is usually a lack of GPRS or 3G data connection.
Notes: The first time you use the HTTPS callback function you might get a message to approve a HTTPS certificate. Answer yes to the question and the call will be established. Next time you call the mobile phone you should have the HTTPS certificate and not get the question again. If you do, please contact you Aastra Mobile Client administrator. The Aastra Mobile Client will frequently download the LCR table from the LCR AMC portal (configured by the AMC administrator). If LCR table download fails, an error message will appear in the AMC GUI.
eud-1048_en.book Page 24 Monday, March 22, 2010 4:25 PM

Call through (DTMF)

The Aastra Mobile Client will force the call via the configured business communications system using DTMF for sending the number to the system (0,5 sec per digit).
Travel SIM function (optional) (MX-ONE only)
When you are abroad, it is often more cost efficient to use a local SIM card. The travel SIM feature allows you to use a local SIM card and still make use of the one number user concept. The Aastra Mobile Client automatically updates the communications system with information which mobile call number is the currently used number.

Notes: Your system administrator must preconfigure the SIM card phone number in the MX-ONE system. See also "SIM Switch Number", page 24. 1. When you switch SIM cards, you are requested by the Aastra Mobile Client to enter the mobile call number of the SIM card you are switching to. Enter the mobile call number in the canonical format (+44.). 2. The Aastra Mobile Client sends the mobile call number to the MX-ONE. All calls to the mobile extension will then be redirected to the mobile call number. 3. When you switch back to the first SIM card, you will be prompted for the mobile call number of that card. Note: If the wrong mobile call number is entered in the Aastra Mobile Client, or if the SIM card is not preconfigured in the MX-ONE system, the Aastra Mobile Client will display an error message.

SIM Switch Number

The Aastra Mobile Client offers you the possibility to activate and use further SIM cards. This enables you to use local SIM cards of foreign countries when traveling abroad and still be reached with one number. All calls you receive to your company call number are routed to the SIM card in use. Your system administrator has to configure all SIM card numbers in the AMC Controller.
Note: See also "Travel SIM function (optional) (MX-ONE only)", page 24. 1. Insert your new SIM card and restart your mobile phone. 2. Select the Switch SIM card command in the Options menu. You are now able to use your mobile phone again.
eud-1048_en.book Page 25 Monday, March 22, 2010 4:25 PM
Aastra MC call. 17 AMC Dual mode.6 Licence.6 Single mode.6 Android.6 Answering calls. 11 Auto Login. 16 Auto start. 16 Automatic HTTPS callback function (MX-ONE only). 23 Automatic start. 16 BlackBerry devices. 9 Symbian-based devices. 8
Keypad autolock. 16 Keypad autolock period. 16
Language. 18 LCR. 23 Lock keypad. 16
Making calls. 12 Minimising the AMC. 11 Mobile Least Cost Routing. 23 Mobile operating system. 6

BlackBerry.6

Call list. Call through. Contacts Contact synchronisation. Contacts. 22 22

PIN. 17 Profiles. 21

Dial mode. 17 Always Aastra MC. 17 Dual Identity. 17 Disclaimer.5 Document information.7
Settings AMC Settings. 16 General settings of mobile phone. 10 SIM. 24 SIM switch number. 24 SMS access. 22 Software-related functions. 7 Starting the AMC. 11 Symbian Symbian S60 3rd Edition. 6 Symbian S60 5th Edition. 6 System-related functions. 7
Emergency numbers. Ending the AMC. Enhanced operation. Exception numbers. 13 18
Fast forward number. 17 Fixed Mobile Convergence.4 FMC.4 Function icons. 19

Telephony functions. 13 Telephony services. 13 Trademarks. 5 Travel SIM function (MX-ONE only). 24

GSM service numbers. 18

User information. 5 User PIN. 17

Home screen. 19

Installation for Android devices.8

Voice Mail. 17, 20

eud-1048_en.book Page 26 Monday, March 22, 2010 4:25 PM
Technical modifications and product availability subject to change without notice. Copyright Aastra Technologies Limited