TS8GSSD25S-S TS8GSSD25S-S TS16GSSD25S-S TS16GSSD25S-S TS32GSSD25S-S//M TS32GSSD25S-S M TS64GSSD25S-S//M TS64GSSD25S-S M

Description

Due to smaller size (fit the standard dimensions of 2.5 SATA Hard Disk Drives), huge capacity, high speed, and low power consumption, Solid State Disk is perfect replacement storage device for PCs, Laptops, gaming systems, and handheld devices.

2.5 Solid State Disk

Features
RoHS compliant Fully compatible with devices and OS that support the SATA 3.0Gbps standard Non-volatile Flash Memory for outstanding data retention Built-in ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer Shock resistance

Placement

Dimensions

Millimeters

100.00 0.40 69.85 0.20 9.50 0.15

Inches

3.937 0.016 2.750 0.008 0.374 0.004
Transcend Information Inc.

1 V1.01

Specifications

Physical Specification

Form Factor Storage Capacities Length Dimensions (mm) Input Voltage Weight Connector Width Height 2.5-inch HDD 8 GB to 64 GB 100.0.40 69.85 0.20 9.50 0.15 5V 5% 48 g SATA 7+15 pins combo connector
Environmental Specifications
Operating Temperature Storage Temperature 0 to 70 - 40 to 85

Power Requirements

Input Voltage Mode Power Consumption (DC 5V @25) Write Read Idle 5V 5% TYP (mA) 124 TYP (W) 1.20 0.95 0.62

Reliability

Data Reliability Data Retention Support 8 Bytes ECC in 512 data bytes 10 years

Regulations

Compliance CE, FCC and BSMI

2 V1.01

Performance
Model P/N TS8GSSD25S-S TS16GSSD25S-S TS32GSSD25S-M TS32GSSD25S-S TS64GSSD25S-M TS64GSSD25S-S Read 104 MB/s 107 MB/s 102 MB/s 119 MB/s 117 MB/s 119 MB/s Write 49 MB/s 50 MB/s 27 MB/s 65 MB/s 43 MB/s 65 MB/s
Random Read 73 MB/s 74 MB/s 74 MB/s 70 MB/s 68 MB/s 70 MB/s
Random Write 18 MB/s 20 MB/s 11 MB/s 24 MB/s 12 MB/s 24 MB/s
* Note : 25 , according to 7+15 pins combo connector test on GIGABYTE GA-965P-DS3, 1GB RAM, Windows XP Version 2002 SP2, benchmark utility HDBENCH (version 3.4006), copied file 100MB.

Actual Capacity

Model P/N TS8GSSD25S-S TS16GSSD25S-S TS32GSSD25S-M TS32GSSD25S-S TS64GSSD25S-M TS64GSSD25S-S User Max. LBA 14,761,984 29,523,968 59,047,936 59,047,936 118,095,872 118,095,872 Cylinder 14,644 16,383 16,383 16,383 16,383 16,383 Head Sector 63 63

Vibration

Operating Non-Operating 3.0G, 5 - 800Hz 3.0G, 5 - 800Hz
* Note: Reference to the IEC 60068-2-6 Testing procedures; Operating-Sine wave, 5-800Hz/1 oct., 1.5mm, 3g, 0.5 hr./axis, total 1.5 hrs.
Operating Non-Operating 1500G, 0.5ms 1500G, 0.5ms
* Note: Reference to the IEC 60068-2-27 Testing procedures; Operating-Half-sine wave, 1500g, 0.5ms, 3 times/dir., total 18 times.

3 V1.01

Package Dimensions
Below figure illustrates the Transcend 2.5 SATA Solid State Disk. All dimensions are in mm.

4 V1.01

Pin Assignments
Pin No. 21 Pin Name GND ABGND NC GND GND 5V GND GND NC Pin No. 22
Pin Name A+ GND B+ NC NC GND 5V 5V GND NC NC

Pin Layout

Pin out

5 V1.01

Block Diagram

6 V1.01

Command Set Command Name
RECALIBRATE READ SECTOR(S) WRITE SECTOR(S) READ VERIFY SECTOR(S) INITIALIZE DEVICE PAPAMETERS DOWNLOAD MICRICODE SMART READ MULTIPLE WRITE MULTIPLE SET MULTIPLE MODE READ DMA WRITE DMA STANDBY IMMEDIATE IDLE IMMEDIATE STANDBY IDLE CHECK POWER MODE SLEEP FLUSH CACHE IDENTIFY DEVICE SET FEATURES
10h 20h 30h 40h 91h 92h B0h C4h C5h C6h C8h CAh E0h E1h E2h E3h E5h E6h E7h ECh EFh

7 V1.01

Ordering Information
The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice.