Reviews & Opinions
Independent and trusted. Read before buy Acer Aspire-5040!

Acer Aspire-5040

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Acer Aspire 5040 Laptop & Notebook, size: 1.7 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Acer Aspire-5040Acer Aspire 5040-3472 Laptop LCD Screen 15.4" WXGA CCFL Single (SUBSTITUTE Replacement LCD Screen ONLY. Not A Laptop ) 5040-3472-73018-LCD
and RESOLUTION before you purchase this item - because some laptop models come with more than one type of screens

Details
Brand: ACER
Part Number: 5040-3472-73018-LCD
UPC: 022099238874

 

[ Report abuse or wrong photo | Share your Acer Aspire-5040 photo ]

Video review

Remove a single key from an Acer Aspire 5040 Laptop

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Chapter 1

System Specifications

Features

Below is a brief summary of the computers many feature:

Platform and memroy

Aspire 3040 Series Mobile AMD SempronTM processor 2800+ to 3300+ or higher with 128/256 KB L2 cache supporting AMD PowerNow!TM technology, and AMD HyperTransportTM technology Aspire 5040 Series AMD TurionTM 64 ML-30/ML-32/ML-37/ML-40 processor at 1.6/1.8/2.0/2.2 GHz or higher with 512 KB or 1MB of L2 cache, supporting AMD PowerNow!TM technology, and AMD HyperTransportTM technology ATI RS482M and SB450 chipset 256/512 MB of DDR333 memory, upgradeable to 2 GB using two soDIMM modules

Display

15.4 WXGA Acer CrystalBriteTM clolor TFT LCD, 1280 x 800 pixel resolution, supporting simultaneous multi-window viewing on dual display via Acer GridVistaTM 15.4 WXGA color TFT LCD, 1280 x 800 pixel resolution, supporting simultaneous multi-window viewing on dual display via Acer GridVistaTM 15.0 XGA color TFT LCD, 1024 x 768 pixel resolution 16.7 million colors ATI MOBILITYTM RADEONTM X1300 with 64 MB or above of external DDR VRAM, supporting ATI HyperMemoryTM with up to 512 MB of shared system memory Microsoft DirectX 9.0 and DualViewTM support MPEG-2/DVD hardware-assisted capability Acer CinemaVisionTM video technology (Acer Arcade) Acer ClearVisionTM video optimization technology (Acer Arcade)

Storage subsystem

40/60/80/100/120 GB ATA/100 hard disk drive Optical drive options: DVD-Dual double-layer drive DVD/CD-RW combo drive

Input devices

88/89-key keyboard Touchpad with 4-way integrated scroll button Four easy-launch buttons
Two front-access LED-buttons:WLAN, Bluetooth
Audio system with two built-in speakers MS-Sound compatible Built-in microphone

Communication

Modem: 56K ITU V.90/V.92 modem with PTT approval; wake-on ring ready LAN: Gigabit Ethernet; Wake-on-LAN ready WLAN: integrated Acer InviLinkTM 802.11g Wi-Fi CERTIFIEDTM solution, supporting Acer SignalUpTM wireless technology WPAN: integrated Bluetooth
Human-centric design and ergonomics
Rugged, yet extremely portable design Stylish appearance Full-size keyboard with four programmable launch keys Ergonomically-centered touchpad pointing device Internet 4-way scroll button

12 (U62) 13 (FAN1) 14 (USB2) 15 (USB3) 16 (USB4) 17 (DDR1) 18 (DDR2) 19 (U79) 20 (HDD1)
CPU Socket System fan connector USB port USB port USB port Dimm slot 1 Dimm slot 2 Cardbus controller HDD connector

10 (U54) 11 (U61)

VGA chipset North bridge

21 (LIN1) 22 (LOUT1)

Line-in jack Line-out jack

Switch Settings

SW1 locates on the top side. Please see the top view No.6. See the picture below for enlarged image. IMPORTANT:Please ignor the switch description on the main board. The description may not be accurate. Please see the table below for swtich settings you need.

Switch SW1-1 No Function

Function

Switch SW1-2 SW1-3

Function Check Password (Bypass Setup password and power on password) No Function Note: The keyboard cable can connect directly to the keyboard controller. Two pins of the keyboard cable are reserved to keyboard-keyboard controller signals. Therefore, you do not need to switch the switch as you change the keyboard to other language. For example, when you need to change English keyboard to French keyboard. You do not need to switch the switch before/after you chagne the keyboard.
No Function Note: The keyboard cable can connect directly to the keyboard controller. Two pins of the keyboard cable are reserved to keyboard-keyboard controller signals. Therefore, you do not need to switch the switch as you change the keyboard to other language. For example, when you need to change English keyboard to French keyboard. You do not need to switch the switch before/after you chagne the keyboard.

An Aspire tour

After knowing your computer features, let us show you around your new TravelMate computer.

Just for Starters.

Front View

Description

Item Display screen Power button Microphone Keyboard Touchpad Click buttons (left, center and right) Easy-launch buttons Status indicators
Description Also called LCD (liquid-crystal display), displays computer output. Turns the computer on and off. Internal microphone for sound recording. For entering data into your computer. Touch-sensitive pointing device which functions like a computer mouse. The left and right buttons function like the left and right mouse buttons; the center button serves as a 4-way scroll button. Buttons for launching frequently used programs. Light-Emitting Diodes (LEDs) that turn on and off to show the status of the computers function and components. Comfortable support area for our hands when you use the computer.

Palmrest

"Launch keys" on page 10

Hardware Specifications and Configurations

Processor

Item CPU type Aspire 3020 Series Mobile AMD SempronTM processor 2600+/3000+ or higher with 128 KB L2 cache, or Mobile AMD SempronTM processor 2800+/3100+ or higher with 256 KB L2 cacher Aspire 5020 Series AMD TurionTM 64 ML-28/ML-32 processor at 1.6/1.8 GHz or higher with 128 KB L1 cache and 512 KB L2 cache, or AMD TurionTM 64 ML-30/ML-34/ML-37/ML-40 processor at 1.6/1.8/2.0/2.2 GHz or higher with 128 KB L1 cache and 1MB L2 cache Core logic CPU package CPU core voltage ATI RS480M+ ATI SB400 Intel socketable 478pin Micro-BGA 1.308V (highest frequency mode) to 0.956V (low frequency mode) 0.748V (deeper sleep mode) Specification
Item BIOS vendor BIOS Version BIOS ROM type BIOS ROM size BIOS package Supported protocols Phneoix 3A03 SST 39SF040A, 512KX8 CMOS Boot Block Flash Memory 512KB 32-pin PLCC ACPI 1.0b, PC Card 95, SM BIOS 2.3, IEEE1284-ECP/EPP, PCI 2.2, PnP 1.0a, DMI 2.0, PS/2 keyboard and mouse, USB 2.0, VGA BIOS, CD-ROM bootable, IEEE 1394 Set by setup manual Specification

BIOS password control

Second Level Cache
Item Cache controller Cache size 1st level cache control 2st level cache control Cache scheme control Built-in CPU 128KB/256KB for Aspire 3020 Series 512KB/1MB for Aspire 5020 Series Always enabled Always enabled Fixed in write-back Specification

System Memory

Item Memory controller Memory size DIMM socket number Supports memory size per socket Supports maximum memory size Supports DIMM type Supports DIMM Speed AMD CPU built-in 0MB (no on-board memory) 2 sockets 1024MB 2G (by two 1024MB SO-DIMM module) DDR Synchronous DRAM 333 MHz Specification
Item Supports DIMM voltage Supports DIMM package Memory module combinations 2.5V and 1.25V 200-pin soDIMM You can install memory modules in any combinations as long as they match the above specifications. Specification

Memory Combinations

Slot 1 0MB 0MB 0MB 0MB 128MB 128MB 128MB 1284MB 256MB 256MB 256MB 256MB 512MB 512MB 512MB 512MB 1024MB 1024MB 1024MB 1024MB 1024MB 128MB 256MB 512MB 1024MB 128MB 256MB 512MB 1024MB 128MB 256MB 512MB 1024MB 128MB 256MB 512MB 1024MB 0MB 128MB 256MB 512MB 1024MB Slot 2 128MB 256MB 512MB 1024MB 256MB 384MB 640MB 1152MB 384MB 512MB 768MB 1280MB 640MB 768MB 1024MB 1536MB 1024MB 1125MB 1280MB 1536MB 2048MB Total Memory

DC Power Requirements 5V(DC) +/- 5% 5V(DC) +/- 5% 5V(DC) +/- 5%

Combo Drive Interface

Item Vendor & model name Performance Specification Transfer rate (KB/sec) Buffer Memory Interface Applicable disc format Specification DVD/CDRW KME UIDA760 (24x24x8x24x) DVD/CDRW QSI SBW-242C (24x24x8x24x) With CD Diskette Sustained: Max 3.6Mbytes/sec 2MB Enhanced IDE(ATAPI) compatible DVD: DVD-ROM, (DVD-5, DVD-9, DVD-10, DVD-18),DVD-R (read, single border), DVD-RW, DVD-RAM (2.6GB, 4.7GB) CD: CD-DA, CD-ROM, CD-ROM XA, CD-R, CD-RW Photo (Multisession) Video CD, CD-Extra, (CD+), CD-test Load: Manual Release: (a) Electrical Release (Release Button) (b) Release by ATAPI command (c) Emergency Release 5 V +/- 5 % (Operating) With DVD Diskette Sustained: Max 10.8Mbytes/sec

Loading mechanism

Power Requirement Input Voltage

DVD-Dual Interface

Item Vendor & model name Performance Specification DVD Dual HLDS GWA-4040N With CD Diskette With DVD Diskette Specification
Item Transfer rate (KB/sec) Buffer Memory Interface Applicable disc format Sustained: Max 3.6Mbytes/sec 2MB Enhanced IDE(ATAPI) compatible Support disc formats 1. Reads data in each CD-ROM, CD-ROM XA, CD-1, Video CD, CD-Extra and CD-Text 2. Reads data in Photo CD (single and Multi-session) 3. Reads standard CD-DA 4. Reads and writes CD-R discs 5. Reads and writes CD-RW discs 6. Reads and writes in each dVD+R/RW (Ver. 1.1) 7. Reads data in each DVD-ROM and DVD-R (Ver. 2.0 for Authoring) 8. Reads and writes in each DVD-R (Ver. 2.0 for general), DVD-RW and DVD+R/RW (Ver1.1) Load: Manual Release: (a) Electrical Release (Release Button) (b) Release by ATAPI command (c) Emergency Release 5 V +/- 5 % (Operating) Specification Sustained: Max 10.8Mbytes/sec

Audio Interface

Item Audio Controller Audio onboard or optional Mono or Stereo Resolution Compatibility Mixed sound source Voice channel Sampling rate Internal microphone Internal speaker / Quantity ALC655 Built-in Stereo 18 bit stereo digital to analog converter 18 bit stereo analog to digital converter AC97 Line-in, CD 8/16-bit, mono/stereo 44,1 KHz (48K byte for AC97 interface) Yes Yes/2 Specification

Video Interface

Item Chipset Package Interface Supports ZV (Zoomed Video) port Specification ATI Mobility RADEON X700 MBGA 708 pin PCIE x16 Yes

Video Memory

Item Chipset Memory size Interface
Specification ATI Mobility RADEON X700 64MB/128MB DDR

USB Port

Item Chipset USB Compliancy Level OHCI Number of USB port Location Serial port function control ATI SB400 2.0 USB 1.1 and USB 2.0 Host controller 4 three on the left side; one on the rear side Enable/Disable by BIOS Setup Specification

IEEE 1394 Port

Item Chipset Number of IEEE 1394 port Location Connector type TI PCILeft side IEEE 1394 Specification

PCMCIA Port

The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters.
PhoenixBIOS Setup Utility Information Main Advanced Security Boot Exit
Item Specific Help System Time: System Date: System Memory: Extended Memory: Video Memory Quiet Boot: Power on display: LCD Auto Dim Network boot F12 Boot Menu D2D Recovery [15:56:48] [02/20/2006] 624 KB 1022 MB 128 MB <Tab>, <Shift-Tab>, or <Enter> selects field. Shows system base memory size Shows extended memory size VGA memory size
[Enabled] [Auto ] [Enabled] [Enabled] [Disabled] [Enabled]
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Parameter System Time System Date
Description Sets the system time. The hours are displayed with 24-hour format. Sets the system date.
Format/Option Format: HH:MM:SS (hour:minute:second) System Time Format MM/DD/YYYY (month/day/ year) System Date
System Memory Extended Memory
This field reports the memory size of the system. Memory size is fixed to 640MB This field reports the memory size of the extended memory in the system. Extended Memory size=Total memory size-1MB Shows the VGA memory size. VGA Memory size=64/128MB Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled. Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled. Option: Enabled or Disabled

VGA Memory Quiet Boot

Power on display
Auto: During power process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be in CRT (or projector) only mode. Otherwise it will be in LCD only mode. Both: Simultaneously enable both the integrated LCD screen and the systems external video port (for an external CRT or projector).

Pull out the wireless LAN antenna from the main unit as shown.
Take out the LCD cable from the main unit then disconnect the cable.
Remove two screws fastening the LCD module. Remove another two screws on the bottom as shown.
10. Then detach the entire LCD module cautiously.
Disassembling the Main Unit
Separate the Main Unit Into the Upper and the Lower Case Assembly
1. 2. Disconnect the touchpad cable from the main board. Disconnect the microphone cable then remove the microphone.
Remove one screw holding the upper case and the lower case assembly. Then remove 13 screws on the bottom as shown.
NOTE: There are two different types of screws on the bottom side. One type is SCREW 2.5-6 (86.9A323.6R0) and the quantity is 10. The other is SCREW M2.5*8 (NON NYLOK) (86.9A323.8R0); the quantity is 3. Please see the image below: red circles indicate SCREW M2.5*8 (86.9A323.8R0) location. Please do not misplace the longer screw to other location on the bottom side. The misplacement may damage the main board.

5. 6. 7.

Open the upper case assembly as shown. After you open the upper case assembly, please disconnect the lid switch cable. Raise upright the upper case assembly as shown then detach it.
Disassembling the Upper Case Assembly
1. 2. Disconnect the touchpad FFC. Remove the three screws fastening the touchpad bracket.
Detach the touchpad bracket carefully. Then detach the touchpad from the touchpad bracket.
Disassembling the Lower Case Assembly
1. 2. 3. Disconnect the bluetooth cable then remove the bluetooth module. Disconnect the speaker set cable from the main board. Remove two screws fastening the main board to the lower case.
Remove three screws fastening the fan to the lower case. Chapter 3
Remove two hex screws holding the main board on the rear side. Then take out the main board from the lower case carefully.

7. 8. 9.

Disconnect the fan cable then remove it. Disconnect the modem board cable from the main board. Remove the two screws holding the modem board.
10. Disconnect the modem board from the main board then remove it. 11. Disconnect the modem cable from the modem board. 12. Remove the three screws holding the CPU heatsink.
13. Remove the CPU heatsink from the main board. 14. Use a flat headed screwdriver to release the CPU socket lock (see the picture on the middle and on the right).
15. Remove the CPU from the socket carefully. 16. Remove the six screws fastening the VGA heatsink. 17. Then remove the VGA heatsink from the main board.
18. Remove the three screws fastening the speaker set. 19. Tear off the tape holding the speaker set. 20. Take out the speaker set from the lower case. This completes main unit disassembly.
Disassembling the LCD Module
1. 2. 3. Remove the four screw caps as shown. Remove the four screws holding the LCD bezel. Then detach the LCD bezel from the LCD module.

4. Follow the instructions in the message window. NOTE: Make sure that the DIMM is fully installed into the connector. A loose connection can cause an error.

Power System Check

To verify the symptom of the problem, power on the computer using each of the following power sources: 1. 2. 3. Remove the battery pack. Connect the power adapter and check that power is supplied. Disconnect the power adapter and install the charged battery pack; then check that power is supplied by the battery pack. Check the Power Adapter on page 60 Check the Battery Pack on page 61
If you suspect a power problem, see the appropriate power supply check in the following list:

Check the Power Adapter

Unplug the power adapter cable from the computer and measure the output voltage at the plug of the power adapter cable. See the following figure
Pin 1: +19 to +20.5V Pin 2: 0V, Ground
If the voltage is not correct, replace the power adapter. If the voltage is within the range, do the following: Replace the System board. If the problem is not corrected, see Undetermined Problems on page 74.
If the voltage is not correct, go to the next step. NOTE: An audible noise from the power adapter does not always indicate a defect. 3. 4. If the power-on indicator does not light up, check the power cord of the power adapter for correct continuity and installation. If the operational charge does not work, see Check the Battery Pack on page 61.

Check the Battery Pack

To check the battery pack, do the following: From Software: 1. 2. 3. 4. 1. 2. Check out the Power Management in control Panel In Power Meter, confirm that if the parameters shown in the screen for Current Power Source and Total Battery Power Remaining are correct. Repeat the steps 1 and 2, for both battery and adapter. This helps you identify first the problem is on recharging or discharging. Power off the computer. Remove the battery pack and measure the voltage between battery terminals 1(+) and 6(ground). See the following figure

From Hardware:

If the voltage is still less than 7.5 Vdc after recharging, replace the battery.

Error Message List

Error Messages Failure Fixed Disk FRU/Action in Sequence Reconnect hard disk drive connector. Load Default Settings in BIOS Setup Utility. Hard disk drive System board Stuck Key Keyboard error Keyboard Controller Failed Keyboard locked - Unlock key switch Monitor type does not match CMOS - Run Setup Shadow RAM Failed at offset: nnnn System RAM Failed at offset: nnnn Extended RAM Failed at offset: nnnn System battery is dead - Replace and run Setup System CMOS checksum bad - Default configuration used System timer error see Keyboard or Auxiliary Input Device Check on page 58. see Keyboard or Auxiliary Input Device Check on page 58. see Keyboard or Auxiliary Input Device Check on page 58. Unlock external keyboard Run Load Default Settings in BIOS Setup Utility. BIOS ROM System board DIMM System board DIMM System board Replace RTC battery and Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board
Error Messages Real time clock error RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Previous boot incomplete - Default configuration used Memory size found by POST differed from CMOS Diskette drive A error Run Load Default Settings in BIOS Setup Utility. RTC battery System board Run Load Default Settings in BIOS Setup Utility. DIMM System board Check the drive is defined with the proper diskette type in BIOS Setup Utility See External Diskette Drive Check on page 58. Incorrect Drive A type - run SETUP System cache error - Cache disabled CPU ID: DMA Test Failed Software NMI Failed Fail-Safe Timer NMI Failed Device Address Conflict Check the drive is defined with the proper diskette type in BIOS Setup Utility System board System board DIMM System board DIMM System board DIMM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Allocation Error for device Run Load Default Settings in BIOS Setup Utility. RTC battery System board Failing Bits: nnnn DIMM BIOS ROM System board Fixed Disk n Invalid System Configuration Data I/O device IRQ conflict None BIOS ROM System board Run Load Default Settings in BIOS Setup Utility. RTC battery System board Operating system not found Enter Setup and see if fixed disk and drive A: are properly identified. Diskette drive Hard disk drive System board FRU/Action in Sequence

No beep Error Messages No beep, power-on indicator turns off and LCD is blank. FRU/Action in Sequence Power source (battery pack and power adapter). See Power System Check on page 59. Ensure every connector is connected tightly and correctly. Reconnect the DIMM. LED board. System board. No beep, power-on indicator turns on and LCD is blank. Power source (battery pack and power adapter). See Power System Check on page 59. Reconnect the LCD connector Hard disk drive LCD inverter ID LCD cable LCD Inverter LCD System board No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connectors. LCD inverter ID LCD cable LCD inverter LCD System board No beep, power-on indicator turns on and a blinking cursor shown on LCD during POST. No beep during POST but system runs correctly. Ensure every connector is connected tightly and correctly. System board Speaker System board

Phoenix BIOS Beep Codes

Code 02h 03h 04h 06h 08h 09h 0Ah 0Bh 0Ch 0Eh 0Fh 10h 11h 12h 13h 14h 16h 17h 18h 1Ah 1Ch 20h 22h 24h 26h 28h 29h 2Ah 2Ch 2Eh 2Fh 30h 32h 33h 36h 38h 3Ah 3Ch 3Dh 42h 45h 1-4-1-1 1-3-4-1 1-3-4-3 1-3-1-1 1-3-1-3 1-2-2-3 Beeps POST Routine Description Verify Real Mode Disable Non-Maskable Interrupt (NMI) Get CPU type Initialize system hardware Initialize chipset with initial POST values Set IN POST flag Initialize CPU registers Enable CPU cache Initialize caches to initial POST values Initialize I/O component Initialize the local bus IDE Initialize Power Management Load alternate registers with initial POST values Restore CPU control word during warm boot Initialize PCI Bus Mastering devices Initialize keyboard controller BIOS ROM checksum Initialize cache before memory autosize 8254 timer initialization 8237 DMA controller initialization Reset Programmable Interrupt Controller Test DRAM refresh Test 8742 Keyboard Controller Set ES segment register to 4 GB Enable A20 line Autosize DRAM Initialize POST Memory Manager Clear 215 KB base RAM RAM failure on address line xxxx RAM failure on data bits xxxx of low byte of memory bus Enable cache before system BIOS shadow RAM failure on data bits xxxx of high byte of memory bus Test CPU bus-clock frequency Initialize Phoenix Dispatch Manager Warm start shut down Shadow system BIOS ROM Autosize cache Advanced configuration of chipset registers Load alternate registers with CMOS values Initialize interrupt vectors POST device initialization

Code 46h 48h 49h 4Ah 4Bh 4Ch 4Eh 50h 51h 52h 54h 58h 59h 5Ah 5Bh 5Ch 60h 62h 64h 66h 67h 68h 69h 6Ah 6Bh 6Ch 6Eh 70h 72h 76h 7Ch 7Eh 80h 81h 82h 83h 84h 85h 86h 87h 88h 89h 8Ah 8Bh 2-2-3-1 2-1-2-3
POST Routine Description Check ROM copyright notice Check video configuration against CMOS Initialize PCI bus and devices Initialize all video adapters in system QuietBoot start (optional) Shadow video BIOS ROM Display BIOS copyright notice Display CPU type and speed Initialize EISA board Test keyboard Set key click if enabled Test for unexpected interrupts Initialize POST display service Display prompt Press F2 to enter SETUP Disable CPU cache Test RAM between 512 and 640 KB Test extended memory Test extended memory address lines Jump to User Patch1 Configure advanced cache registers Initialize Multi Processor APIC Enable external and CPU caches Setup System Management Mode (SMM) area Display external L2 cache size Load custom defaults (optional) Display shadow-area message Display possible high address for UMB recovery Display error messages Check for configuration errors Check for keyboard errors Set up hardware interrupt vectors Initialize coprocessor if present Disable onboard Super I/O ports and IRQs Late POST device initialization Detect and install external RS232 ports Configure non-MCD IDE controllers Detect and install external parallel ports Initialize PC-compatible PnP ISA devices Re-initialize onboard I/O ports Configure Motherboard Configurable Devices (optional) Initialize BIOS Area Enable Non-Maskable Interrupts (NMIs) Initialize Extended BIOS Data Area Test and initialize PS/2 mouse
Code 8Ch 8Fh 90h 91h 92h 93h 95h 96h 97h 98h 99h 9Ah 9Ch 9Dh 9Eh 9Fh A0h A2h A4h A8h AAh ACh AEh B0h B2h B4h B5h B6h B9h BAh BBh BCh BDh BEh BFh C0h C1h C2h C3h C4h C5h C6h C7h C8h C9h 1 1-2
POST Routine Description Initialize floppy controller Determine number of ATA drives (optional) Initialize hard-disk controllers Initialize local-bus hard-disk controllers Jump to UserPatch2 Build MPTABLE for multi-processor boards Install CD ROM for boot Clear huge ES segment register Fixup Multi Processor table Search for option ROMs. One long, two short beeps on checksum failure. Check for SMART drive (optional) Shadow option ROMs Set up Power Management Initialize security engine (optional) Enable hardware interrupts Determine number of ATA and SCSI drives Set time of day Check key lock Initialize Typematic rate Erase F2 prompt Scan for F2 key stroke Enter SETUP Clear Boot flag Check for errors POST done- prepare to boot operating system One short beep before boot Terminate QuietBoot (optional) Check password (optional) Prepare Boot Initialize DMI parameters Initialize PnP Option ROMs Clear parity checkers Display MultiBoot menu Clear screen (optional) Check virus and backup reminders Try to boot with INT 19 Initialize POST Error Manager (PEM) Initialize error logging Initialize error display function Initialize system error handler PnPnd dual CMOS (optional) Initialize notebook docking (optional) Initialize notebook docking late Force check (optional) Extended checksum (optional)

PCMCIA-Related Symptoms

Symptom / Error System cannot detect the PC Card (PCMCIA) PCMCIA slot pin is damaged. PCMCIA slot assembly System board PCMCIA slot assembly Action in Sequence

Memory-Related Symptoms

Symptom / Error Memory count (size) appears different from actual size. Action in Sequence Enter BIOS Setup Utility to execute Load Default Settings, then reboot system. DIMM System board

Speaker-Related Symptoms

Symptom / Error In Windows, multimedia programs, no sound comes from the computer. Internal speakers make noise or emit no sound. Audio driver Speaker System board Speaker System board Action in Sequence
Power Management-Related Symptoms
Symptom / Error The system will not enter hibernation Action in Sequence See Save to Disk (S4) on page 28. Keyboard (if control is from the keyboard) Hard disk drive System board The system doesn't enter hibernation mode and four short beeps every minute. Press Fn+oand see if the computer enters hibernation mode. Touchpad Keyboard Hard disk connection board Hard disk drive System board The system doesnt enter standby mode after closing the LCD The system doesn't resume from hibernation mode. See Save to Disk (S4) on page 28. LCD cover switch System board See Save to Disk (S4) on page 28. Hard disk connection board Hard disk drive System board The system doesn't resume from standby mode after opening the LCD. See Save to Disk (S4) on page 28. LCD cover switch System board
Symptom / Error Battery fuel gauge in Windows doesnt go higher than 90%. Action in Sequence Remove battery pack and let it cool for 2 hours. Refresh battery (continue use battery until power off, then charge battery). Battery pack System board System hangs intermittently. Reconnect hard disk/CD-ROM drives. Hard disk connection board System board
Peripheral-Related Symptoms
Symptom / Error System configuration does not match the installed devices. External display does not work correctly. USB does not work correctly Print problems. Action in Sequence Enter BIOS Setup Utility to execute Load Default Settings, then reboot system. Reconnect hard disk/CD-ROM/diskette drives. Press Fn+F5, LCD/CRT/Both display switching System board System board Ensure the Parallel Port in the Onboard Devices Configuration of BIOS Setup Utility is set to Enabled. Onboard Devices Configuration Run printer self-test. Printer driver Printer cable Printer System Board Serial or parallel port device problems. Ensure the Serial Port in the Devices Configuration of BIOS Setup Utility is set to Enabled. Device driver Device cable Device System board
Keyboard/Touchpad-Related Symptoms

33.A46V1.004 KH.06007.006 KH.06001.002 KH.06004.004 33.A46V1.004 KH.08007.007 KH.08001.012 KB.A2707.001 KB.A2707.002 KB.A2707.003 KB.A2707.004 KB.A2707.007 KB.A2707.008 KB.A2707.009 KB.A2707.010 KB.A2707.011 KB.A2707.012 KB.A2707.013 KB.A2707.014 KB.A2707.015 KB.A2707.016 KB.A2707.017 KB.A2707.018
LCD Module NS ASSY LCD MODULE 15IN. XGA W/ ANTENNA 6M.A46V1.011 KEYBOARD DARFON NSK-H3M0D DANISH KEYBOARD DARFON NSK-H3M0T TURKISH KEYBOARD DARFON NSK-H3M0L GREEK KEYBOARD DARFON NSK-H3M0R RUSSIAN KB.A2707.019 KB.A2707.020 KB.A2707.023 KB.A2707.025
INVERTER BOARD DARFON V0.21189301

19.A46V1.001

LCD/INVERTER CABLE 15" XGA

50.A46V1.006

LCD BRACKET 15" LEFT

33.A46V1.008

LCD BRACKET 15" RIGHT

33.A46V1.007

LCD BEZEL 15"

60.A46V1.009

NS LCD PANEL W/HINGE 60.A46V1.007

NS NS NS

HINGE PACK 15.4IN. LEFT/RIGHT WIRELESS ANTENNA LCD 15 IN. TFT XGA LG LP150X08A3 (MADE IN CHINA)
6K.A46V1.001 25.A46V1.001 LK.15008.016
NS NS NS NS NS NS NS NS NS NS NS NS NS Main Board 20
LCD MODULE 15.4IN. WXGA W/ ANTENNA GLARE TYPE INVERTER BOARD DARFON V0.21189301 INVERTER BOARD DELTA DAC08N011 INVERTER BOARD FOXCONN T62I240.00 LCD/INVERTER CABLE 15.4IN. XGA LCD BRACKET 15.4IN. LEFT LCD BRACKET 15.4IN. RIGHT LCD BEZEL 15.4IN. LCD PANEL 15.4IN. W/HINGE HINGE PACK 15.4IN. LEFT/RIGHT WIRELESS ANTENNA LCD 15.4IN. WXGA LG LP154W01A5K2 GLARE TYPE LCD 15.4IN. WXGA CHIMEI N154I1L07 GLARE TYPE MAINBOARD M26P128MB/6IN1/GBL W/O CPU W/PCMCIA SLOT & RTC BATTERY (for Aspire 5020) MAINBOARD M24P64MBSAMSUNG/ 6IN1/GBL W/O CPU W/PCMCIA SLOT & RTC BATTERY (for Aspire 3020) RTC BATTERY
6M.A46V1.021 19.A46V1.001 19.A46V1.002 19.A46V1.003 50.A46V1.005 33.A46V1.006 33.A46V1.005 60.A46V1.008 60.A46V1.005 6K.A46V1.001 25.A46V1.001 LK.15408.010 LK.1540D.004

LB.A4601.001

LB.A4601.002

23.T39V1.001

PCMCIA SLOT/PC CARD SLOT Memory

22.T39V1.001

NS SDIMM 256M NANYA NT256D64SH8C0GM-6K KN.25603.019
NS NS NS NS NS NS NS Microphone NS
SDIMM 256M INFINEON HYS64D32020HDL-6-C (.11U/G) SDIMM 256M HYNIX HYMD232M646D6-J SDIMM 256M SAMSUNG M470L3224FT0-CB3 SDIMM 256M MICRON MT8VDDT3264HG-335G3 SDIMM 512M HYNIX HYMD564M646B6-J SDIMM 512M INFINEON HYS64D64020HBDL-6-C SDIMM 512M SAMSUNG M470L6524CU0-CB3 MICROPHONE

 

Tags

Sportvagn Canon HG20 T8112D Win98 SP-PW100 RLT30CD Summit 200 Awyahdp HT-TX35 Control Review TDA-7592R Premium Simdriveline 1 CD-01U UE-40C5100QW Assistant WD-14316RDK CU-4E23JBE X7500 RMT-D165A HBH-PV703 RE-21FB50RX Wires-II Cruz MP34 Toshiba D-R5 28PW9525 L204WT KX-TCD200FX PV-800 EWD2202 PC22224 Diablo Tribe Roland E-80 Batteries PB50 Magic TD-3KW CDX-S2250 ETP 630 LST243H-2 GP1200R-2002 Z-6100 Ba2600 DI8512 Sigma SD10 FTB-200 R 350 LE40C650 Aingel 3201 YP-U5JAW AV-29FT1sug-av-29ft1 KDC-MP4032 DAV-F500 GP-1850W XSU-00351B Sense SC-AK12 50600 SP-2004C I845 30058 WR125R KX-TD208E MBF 550 Inspiron 6400 EL-1611E M208WA-BZ SHD525XF1 DCR-TRV6E MSQ-100 Caddx NX-8 DCR-HC21E TFT7210R PM-7001KI N1B Padkontrol Fifa 06 WD3200H1q-00 Hasbro Clue Finepix A605 TX1502 W705I 75 A LA37B530 ITD602 Conquer-renegade Crossover CD-DK890N PSS-790 EWT805 GA-965P-ds3 HT-S3200 KDC-W6041U ROC 4206 CMT-NEZ31 945GCM-S Cartrek 600 HVR-HD1000P RX-7000 C5030 Desktop

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101