Acer Projector X1161/X1161A/X110/X1161N/X1261 Series User's Guide
Copyright 2009. Acer Incorporated. All Rights Reserved. Acer Projector X1161/X1161A/X110/X1161N/X1261 Series User's Guide Original Issue: 10/2009
Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.
Acer Projector X1161/X1161A/X110/X1161N/X1261 Series
Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Information for your safety and comfort
Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to the external power supply unit:
Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings!

Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.
Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.
Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Caution for Listening

To protect your hearing, follow these instructions.
Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) contain Mercury, Dispose Properly.
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

First thing first

Usage Notes
Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions:

Don't:

In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt. Near any appliance that generates a strong magnetic field. Place In direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock. When changing the lamp, please allow unit to cool down, and follow all changing instructions. This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module. When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Usage Notes Precautions

Introduction
Product Features Package Overview Projector Overview Projector Outlook Remote Control and Control Panel Layout

Getting Started

Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning off the Projector Adjusting the Projected Image Adjusting the Height of Projected Image How to optimize image size and distance
How to get a preferred image size by adjusting distance and zoom 13

User Controls

Installation menu Acer Empowering Technology Onscreen Display (OSD) Menus Color Image Setting Management Audio Language

Appendices

Troubleshooting

Contents

LED & Alarm Definition Listing Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes
Regulations and safety notices

Product Features

This product is a single-chip DLP projector. Outstanding features include:

English

DLP technology X1161/X1161A/X110/X1161N series: Native 800 x 600 SVGA resolution X1261 series : Native 1024 x 768 XGA resolution 4:3 / 16:9 aspect ratio supported Acer ColorBoost technology delivers nature's true colors for vivid, life-like images High brightness and contrast ratio Versatile display modes (Standard, Video, Bright, Picture, Game, User) for optimum performance in any situation NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported Lower power consumption and economy (ECO) mode extends lamp life Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement. Empowering Key reveals Acer Empowering Technology utilities (Acer eView, eTimer, ePower Management) for easy adjustment of settings Advanced digital keystone correction optimizes presentations Multi-language onscreen display (OSD) menus Manual focus projection lens zooms up to 1.1X 2X digital zoom and pan move function Microsoft Windows 2000, XP, Vista, Macintosh OS compliant

Package Overview
This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing.

Projector with lens cap

Power cord

VGA cable

XXXXXX 3V
Composite video cable (X1161/X1261 series)

Battery

Security card

Acer Projector

Quick Start Guide

Users guide

Remote control

Quick start guide

Carrying case (X1161/X1161N/X1261 series)

Projector Overview

Projector Outlook

Front / upper side

Description
Ventilation (inlet) Ventilation (outlet) Remote control receivers Focus ring Zoom lens
Lens cap Power button Remote control Zoom lever Horn

Rear side

X1161N Series: 1 Power socket 2 KensingtonTM lock port 3
X1261 Series: 1 Power socket 2 KensingtonTM lock port PC analog signal/HDTV/component video input connector (VGA IN 1 or VGA IN) S-Video input connector Composite video input connector PC analog signal/HDTV/component video input connector (VGA IN 2)
PC analog signal input connector (VGA 3 In 1 or VGA In) USB connector Power socket Kensington lock port PC analog signal/HDTV/component video input connector S-Video input connector Composite video input connector RS232 connector USB connector

X1161/X1161A/X110 only:

RS232 connector Monitor loop-through output 8 connector (VGA-Out) 9 Audio input connector 10* USB connector
Note: "*" Optional.
Remote Control and Control Panel Layout

Function

Remote control receiver POWER MENU
Receives signals from remote control. Refer to the "Turning the Projector On/Off" section.
Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items.
KeyPad 0~9 ASPECT RATIO RESYNC FREEZE KEYSTONE
Press "0~9" to input a password in the "Security". To choose the desired aspect ratio (Auto/4:3/16:9). Automatically synchronizes the projector to the input source. To pause the screen image. Adjusts the image to compensate for distortion caused by tilting the projector ( 40 degrees).
Four directional Use up, down, left, right buttons to select items or make select keys adjustments to your selection. ZOOM SOURCE HIDE Zooms the projector display in or out. Changes the active source. Momentarily turns off the video. Press "HIDE" to hide the image, press again to display the image.

The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. The Installation menu includes the following options: Projection method Projection location Menu location Keystone settings Language settings Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu.
Push the menu button anytime to exit the menu and return to the Acer welcome screen.
Acer Empowering Technology

Empowering Key

Acer Empowering Key provide three Acer unique functions, they are "Acer eView Management", "Acer eTimer Management" and "Acer ePower Management" respectively. Press " " key for more than one second to launch the Onscreen display main menu to modify its function.

Acer eView Management

Press " " to launch "Acer eView Management" submenu. "Acer eView Management" is for display mode selection. Please refer to Onscreen Display Menus section for more detail.

Acer eTimer Management

Press " " to launch "Acer eTimer Management" submenu. "Acer eTimer Management" provides the reminding function for presentation time control. Please refer to Onscreen Display Menus section for more detail.

Acer ePower Management

Press " " to launch "Acer ePower Management". "Acer ePower Management" provides user one shortcut to save lamp and projector life. Please refer to Onscreen Display section for more detail.
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings.

Using the OSD menus

To open the OSD menu, press "MENU" on the remote control. When the OSD is displayed, use the keys to select any item in the to enter
main menu. After selecting the desired main menu item, press submenu for feature setting.

Use the using the

keys to select the desired item and adjust the settings by keys.
Select the next item to be adjusted in the submenu and adjust as described above. Press "MENU" on the remote control, the screen will return to the main menu. To exit OSD, press "MENU" on the remote control again. The OSD menu will close and the projector will automatically save the new settings.

Main menu

Setting

Sub menu

Display Mode
There are many factory presets optimized for various types of images.

Wall color

Standard: For common environment. Video: For playing video in a bright environment. Bright: For brightness optimization. Picture: For graphic picture. Game: For game content. User: Memorize users settings.
Use this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Adjust the brightness of the image.

Brightness

Contrast

Press Press

to darken image. to lighten the image.
"Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.
Color Temperature Degamma Color R Color G Color B
to decrease the contrast. to increase the contrast.
Adjust the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Adjusts the red color. Adjusts the green color. Adjusts the blue color.

Saturation

Adjusts a video image from black and white to fully saturated color.
to decrease the amount of color in the image. to increase the amount of color in the image.
Adjusts the color balance of red and green.
to increase the amount of green in the image. to increase the amount of red in the image.
Note: "Saturation" and "Tint" functions are not supported under computer mode or DVI mode.

Projection mode

Projection Location
Front: The factory default setting.
Rear: Reverses the image so you can project from behind a translucent screen.

Auto: Automatically adjusts projection location of image.
Desktop Ceiling: Turns the image upside down for ceiling-mounted projection.

Aspect Ratio

Use this function to choose your desired aspect ratio. Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio.
Auto Keystone Manual Keystone
Automatically adjusts vertical image. Adjust image distortion caused by tilting projection. (40 degrees)
<Note> The Manual Keystone funcion is unavailable under Auto Keystone setting to "On". H. Position (Horizontal position) V. Position (Vertical position) Frequency

Press Press Press Press

to move the image left. to to move the image right. to move the image down. to move the image up.
"Frequency" changes the projector's refresh rate to match the frequency of your computers graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. Adjusts the sharpness of the image.

Tracking

Sharpeness
to decrease the sharpness. to increase the sharpness.
Choose "NVIDIA 3D Vision" or "DLP 3D" to enable 3D function supported by NVIDIA or TI DLP 3D technology.
NVIDIA 3D Vision: This is only supported on X1261. Choose this item while using NVIDIA 3D glasses, IR emitter, NVIDIA graphic card and NVIDIA compliant 3D games or 3D movie with corresponding SW player. Please visit NVIDIA URL (http://www.nvidia.com/object 3D_Vision_Requirements.html) to check detail system configuration. DLP 3D: Choose this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI.) graphic card and HQFS format file or DVD with corresponding SW player. Off: Turn off 3D mode.

3D Sync L/R

If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/ right image sequence to get the correct image (for DLP 3D). This function is only available while DLP 3D is selected.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under DVI or Video mode. Note: "Sharpness" functions is not supported under DVI and Computer mode. Note: "Auto Keystone" functions is not supported in X1161A/X110/X1161N. Note: "Projection Location--> " functions is not supported in X1161A/ X110/X1161N. Note: 3D function is supported by VGA source only. Please see timing table for detail 3D timings. Note: While using NVIDIA 3D Vision, please download and install latest NVIDIA 3D VISION driver from NVIDIA web site for your graphic card to support this projector. Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below, - NVIDIA Stereoscopic 3D Video Player: http://www.nvidia.com/object/3D_Drivers_Downloads.html - Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx - DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html Note: "3D Sync L/R" is only available when DLP 3D is enabled. Note: There has reminder screen if 3D still enable when power on projector. Please adjust setting depended on your purpose.

Menu Location Source Lock
Choose the menu location on the display screen. When source lock is turned "off", the projector will search for other signals if the current input signal is lost. When source lock is turned "on", it will "lock" the current source channel unless you press "Source" button on the remote control for the next channel. Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. <Note> This function is not available when the aspect ratio is "16:9" or 16:9 format detected under "Auto mode". Security This projector provides a useful security function for the administrator to manage usage of the projector. Press to change the "Security" setting. If the security function is enabled, your must enter the "Administrator Password" first before changing the security settings.

Closed Caption

Security
Select "On" to enable the security function. The user has to enter a password to operate the projector. Please refer to the "User Password" section for details. If "Off" is selected, then the user can turn on the projector without password.
Timeout(Min.) Once "Security" is activated to "On", the administrator can set timeout function.
to select the timeout interval.
The range is from 10 minute to 990 minutes. When the time is up, the projector will prompt the user to enter the password again. The factory default setting of "Timeout(Min.)" is "Off". Once the security function is enabled, the projector will request user to enter password when switch on the projector. Both "User Password" and "Administrator Password" can be accepted for this dialogue.

User password

to setup or change the "User Password".
Press number keys to set your password on the remote control and press "MENU" to confirm. Press to delete character.
Enter the password when you see "Confirm Password" displayed. The password should be between 4 and 8 characters long. If you select "Request password only after plugging power cord", the projector will prompt the user to enter the password every time the power cord is plugged. If you select "Always request password while projector turns on", the user has to enter the password every time when the projector is turned on.

Administrator Password The "Administrator Password" can be used in both the "Enter Administrator Password" and "Enter Password" dialog boxes.
to change the "Administrator Password".
The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to retrieve the administrator password: An unique 6-digit "Universal Password" which is printed on the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is. If losing this security card and number, please contact with an Acer service center. When "ON" is selected, only the Power Key on the remote control can be used. If "OFF" is selected, then the Power Key on either the remote control or the control panel can be used to control the projector. Default is "Off". Choose "On" to enable VGA OUT connection. Press the button and choose "Yes" to return the parameters on all menus to the factory default settings.

Disable Power button

VGA OUT (Standby) Reset
Note: "Closed Caption" functions is not supported in X1161N. Note: "VGA OUT (Standby)" function is supported in X1261.

Management

ECO Mode
Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. The projector will automatically shutdown when there is no signal input after the allocated time. (in minutes) Displays the lamps elapsed operating time (in hours). Activate this function to display a reminder to change the lamp 30 hours before its expected end-of-life. Press the button and choose "Yes" to turn the lamp hour counter to 0 hours.
High Altitutde Auto Shutdown Lamp Hour Elapse Lamp Reminding Lamp Hour Reset

Volume

to decrease the volume. to increase the volume.
Choose "On" to mute the volume. Choose "Off" to restore the volume.
Note: Audio menu is for X1261 series.

Projector Bracket

Supports projector and allows for adjustments

Spacer

- For heat dissipation
Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod.
Large cylinder cap Allen Key Screw Type A
50 mm length 8 mm diameter - For tightening/loosening
5 Adjust the angle and positioning as necessary.
Tightening Screw Allen Key
Allen Key Tightening Screw
Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack.
Models X1161/X1161A/ X110/X1161N/ XScrew Type B Diameter (mm) Length (mm) 25 Large V Washer Type Small V

SCREW SPEC. M3 x 25 mm

95.00 mm

15.00 mm

82.30 mm

Specifications

The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications.
Projection system Resolution DLP X1161/X1161A/X110/X1161N: Native: SVGA (800 x 600) , Maximum: Maximum: UXGA (1600 x 1200), WSXGA+ (1680x1050), 1080p(1920x1080) X1261: Native: XGA (1024 x 768), Maximum: Maximum: UXGA (1600 x 1200), WSXGA+ (1680x1050), 1080p(1920x1080) IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA + NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/ K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) 4:3 (native), 16:9 16.7 million colors F/ 2.41 - 2.55, f = 21.79 mm - 23.99 mm, 1.1X manual zoom lens 23" (0.58 m) - 303" (7.70 m) 3.3' (1.0 m) - 39.4' (12.0 m) 50"@2m (1.95 - 2.15:1) 30k - 100 kHz 50-85 Hz, 120Hz (for 3D mode only) 180W user-replaceable lamp 40 degrees Internal speaker with 2 W output (X1261) 2.26 Kg (4.9 lbs.) 268 mm x 192 mm x 80 mm (10.6" x 7.6" x 3.1") 2X AC input 100 - 240 V auto-switching power supply 230W 10% for normal mode 200W 10% for ECO mode 5C to 35C / 41F to 95F

Computer compatibility

Video compatibility
Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Lamp type Keystone correction Audio Weight Dimensions (W x D x H) Digital Zoom Power supply Power consumption Operating temperature

Acer Incorporated

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan
Declaration of Conformity
We, Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw And, Acer Europe SA Via Cantonale, Centro Galleria Manno Switzerland Hereby declare that:
Product: Trade Name: Model Number: Machine Type:
Projector Acer DSV0817/ DNX0818 X1161/X1161N/X1161A/X110/X1261 series
Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:
-. EN55022, AS/NZS CISPR22, Class B -. EN55024 -. EN61000-3-2 Class A -. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard:

-. EN60950-1

RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment
-. The maximum concentration values of the restricted substances by weight in homogenous material are:
Lead Mercury Hexavalent Chromium

0.1% 0.1% 0.1%

Polybrominated Biphenyls (PBBs) Polybrominated Diphenyl Ethers (PBDEs) Cadmium

0.1% 0.1% 0.01%

Directive 2005/32/EC of the European Parliament and of the Council with regard to Eco-design Requirements.
The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse.
R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: Article 3.1(a) Health and Safety

-. EN60950-1 -. EN62311

Article 3.1(b) EMC
-. EN301 489-1 -. EN301 489-17
Article 3.2 Spectrum Usages
-. EN-. EN(Applicable to 5GHz high performance RLAN).
Year to begin affixing CE marking 2009.
_______________________________

Oct. 1, 2009

Easy Lai /Manager
Regulation Center, Acer Inc.

Acer America Corporation

333 West San Carlos St., San Jose CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com
Federal Communications Commission Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer / Importer is responsible for this declaration:
Product: Model Number: Machine Type: Name of Responsible Party: Address of Responsible Party: DLP Projector DSV0817/ DNX0818 X1161/X1161N/X1161A/X110/X1261 series Acer America Corporation 333 West San Carlos St. San Jose, CA 95110 U. S. A. Acer Representative 254-298-4000 254-298-4147