How to use your Stereo Bluetooth Speakers Comment utiliser votre systme Stereo Bluetooth Speakers Verwendung des Stereo Bluetooth Lautsprechers Cmo utilizar sus altavoces estereofnicos Bluetooth
Designed and engineered by Acoustic Energy Limited, England.

Made in Malaysia

How to use your Stereo Bluetooth Speakers

on / off volume

status LED
1. Plug in the mains adaptor. 2. Separate the speakers from the amplifier unit if required - the cable simply unwinds from the back of the speakers. The speakers can be disconnected from the amplifier unit by holding it and sliding the speakers forward. 3. Turn on via the large silver knob on front The LED light should flash green slowly, showing that the unit is in standby mode. 4. To connect an A2DP stereo Bluetooth device for the first time:
Power On Standby Standby (abnormal disconnection) Pairing Paired Successfully No Pairing found

Action

Connect power & turn knob

LED Status

Steady Green (for 3 sec) Blink Green
Steady Orange In standby mode, press and hold the MFB for 8 seconds
System will re-link with the last connected A2DP device automatically within 10 minutes Blink Green & Red Blink Green (5 times rapidly) Blink Orange (5 times rapidly) Exit Pairing Re-link with the last connected device In pairing mode, press and hold MFB for 8 Seconds Press MFB once in standby mode If nothing pairs within 2 minutes, the system will exit pairing mode, and enter standby mode.
a. Hold down the MFB for approximately 8 seconds until the LED flashes red/green.
multi function button (MFB)
b. Search for the Stereo Bluetooth Speaker system on your Bluetooth device and pair with it once youve found it. See your devices (e.g. mobile phone) user manual for more detail on this. c. Enter the pass-code, which is 8888. d. Once you have successfully paired the speakers and your device, the LED will blink 5 times. e. This can be repeated if you would like to pair with an alternative device at any time. 5. To connect to the Stereo Bluetooth device that was last used, press the MFB once when in standby mode.

Hardwired Mode

Plug source into min-jack connector on rear of unit

Blink Green

This will disconnect feed from bluetooth module

General Specification

Product Name Model Number Type Power Output Drive Unit Frequency response +/- 3dB Stereo Bluetooth Speaker AE29-06C Stereo Active Bluetooth Speaker System 2 x 10 W Full range, low distortion, woven glass 70Hz - 18KHz

Dimensions Weight

387 x 155 x 130 2.25Kg
3.5mm jack speaker connectors
6. To play a hard wired source such as a digital music (MP3 etc) player, simply connect the source in to the mini jack connector on the rear of the unit and adjust the volume knob until its at the level you want.
Please note that this will disconnect the Bluetooth device and the mini-jack will have to be removed to return to a Bluetooth connection! 12v DC jack
Bluetooth Standard Bluetooth A2DP Profile Theoretical range in open field Antenna Speaker Impedance

FREE Bluetooth Speakers worth 99.00
Get FREE, the award winning Acoustic Energy A2DP Bluetooth speaker system worth 99.00 when you purchase this product: Offer ends on 25th of February 2011, claim form in the box - whilst stocks last (one per customer)