ADS Tech Instant Music MAC OSX Edition Product Introduction Thanks for purchasing Instant Music by ADS Tech. With the Instant Music, you will be able to Record Your Old LPs and Cassettes to Audio CD and MP3. Capture from any analog audio source: cassette, turntable, TV, radio Capture Music in AIFF format Convert into MP3, ACC or other formats using iTunes Burn high quality audio CDs with iTunes Convert and Preserve Your Audio Investment Your old LPs can warp or get scratched and your audio cassettes will simply deteriorate over time. Protect your music collection by converting into a digital audio format you can enjoy forever. Convert your old collection of cassettes and LPs into crisp, clear digital audio and then create audio CDs and MP3 CDs so you can keep a personal archive of your collection that will not degrade or deteriorate over time. Simple to Install and Use Its simple to start capturing audio on your MAC with Instant Music. Simply connect to a USB port and then use GarageBand (available in iLife 04 software bundle) ,Sound Studio 2.1, Audacity 1.2.3 or CDSpinDoctor 2.0 from Roxio to capture the audio from your Stereo System, Cassette or Turntable. Making Music Is as Easy as 1, 2, 3, 4 Instant Music makes it easy to record, convert, play and burn your music. Its as simple as 1, 2, 3, 4: 1.) Record once from your LP, cassette or even radio into AIFF audio format in your MAC with popular software applications. 2.) Convert music files into different audio formats like MP3, AAC, WAV and many others and then create a playlist with iTunes. Edit your music track with GarageBand or Sound Studio 2.1 or other popular applications. 3.) Play your music on your MAC using iTunes or transfer it to a portable MP3 player like your iPod. 4.) Burn to a CD. Works with Your MAC too! If you have GarageBand (included in iLife 04), Sound Studio 2.1, Audacity 1.2.3 or CDSpinDoctor 2.0, just plug Instant Music into a USB Port and start recording music on your MAC. You can even export directly to your personal iTunes music library!
Knowing your Instant Music device LED on your Instant Music: - Red Power LED this LED show that the unit is connected and ready to capture Audio - Green S/PDIF Signal LED: This LED is constantly ON when you are using an Optical Input connection. This LED will be ON and OFF when there is no Optical Input connected.
Front of Instant Music Available Audio IN/Out Connections and USB (located at the back of the unit): Left/Right Audio Input (RCA) Left/Right Audio Output (RCA) Optical Input (S/PDIF) Optical Output (S/PDIF) USB Connector

Back of Instant Music

Page 1 of 12
Using GarageBand with Instant Music

Page 2 of 12

Installing your Instant Music Setup 1. Getting all the components: a. Instant Music b. 6 ft. USB Cable c. L/R Audio Cable w/ Ground d. Adapter Audio Cable 2. Connecting your Sound Device for Recording a. You can use the L/R RCA Audio Input or the Optical Input (S/PDIF Input) to connect to your Sound Device (Record Player, Tape Player or other source with RCA Audio Output). b. If you are using both connections (S/PDIF Input and L/R RCA Input) at the same time, the Optical Input (S/PDIF Input) will be selected as the input stream. c. If using a Turntable, make sure you also use a Preamplifier, unless the Turntable has a Preamplifier built-in. 3. Installing your Hardware
4. Setting up the Sound Input/Output option. a. Click on the Apple icon. b. Click System Preferences c. Click the Sound icon d. Click Input and select USB Audio CODEC for input device (See below)
Sound Input settings e. Click Output and select Internal speakers is selected (See below)
System Profiler Turn on your MAC Connect the USB Cable to the USB port of your Instant Music device Connect the other end to an available USB port on your MAC All Drivers needed for the Instant Music will be automatically loaded. Check if the USB Audio Codec was installed correctly by accessing your System Profiler. To access your System Profiler, click the Apple icon located on the top left of your screen, click About this Mac, click More Info. f. In System Profiler, select USB under the Contents column and verify that you have a USB Audio CODEC listed under USB Bus. (See fig. above) g. If you dont see the USB Audio CODEC listed, please unplug and re-insert the USB cable to the MAC and to the Instant Music device. h. Check your System Profiler once again. Click View and Refresh to Refresh the Window. a. b. c. d. e.

Page 3 of 12 Using GarageBand with Instant Music Page 4 of 12

Sound Output Settings

Using GarageBand software with Instant Music device 5. Setting up iTunes Importing options (required step if you are exporting audio files to iTunes). a. Start iTunes b. Click iTunes on the tool bar. c. Click Preferences d. Click Importing icon e. Select which Audio encoder you would like to use: AAC Encoder AIFF Encoder Apple Lossless Encoder MP3 Encoder (recommended) WAV Encoder f. To create an MP3 file from your recordings, please select MP3 Encoder option. g. On Settings, please select the type of Audio Quality you want (see fig. below): Good Quality (128 kbps) High Quality (160 kbps) Higher Quality (192 kbps) 1. Using GarageBand application. 2. Setting Up GarageBand to use Instant Music a. Launch GarageBand b. Click GarageBand on the toolbar and Select Preferences

GarageBand

iTunes Import Options

GarageBand Preferences

Page 5 of 12

Page 6 of 12

c. Click Audio/MIDI and set the following configuration: Audio Output: Built-in Audio Audio Input: USB Audio CODEC (see fig. below)

d. e. f. g.

Click Basic Track No Effects Set Input: Channel 1 / 2 Format: Stereo Monitor On, this will allow you to listen to the music coming from your Sound System (LP, Tape or other source) h. Click OK (see fig. below)
Audio Output/Input Setup d. Close the Audio/MIDI window interface 3. Start a New Track a. Click Track on the tool bar b. Click New Track
New Track Settings 4. Start Recording: a. You should hear the music playing from your Audio Source (Tape, Turntable, etc.). b. Adjust your Audio Source to the beginning of the music you want to record. c. Press the Record button (located on the lower part of the screen) of the GarageBand interface to start Recording. (See fig. below)
Record button d. e. f. g. h. i. j. k. New Basic Track c. Click Real Instrument
Page 7 of 12 Using GarageBand with Instant Music Page 8 of 12 Using GarageBand with Instant Music
Start playing the Audio Source from the beginning of the song. You are now capturing and recording your Audio Source into AIFF audio format. Press the Record button at the end of the song to stop recording. Save your Track by using the name of the song you just recorded. Click File and then Save. Trim the audio file if necessary. Click File on the tool bar. Select Export to iTunes to convert your audio file (AIFF format) to MP3 audio format. Please see instruction on how to set up Importing options in iTunes.

5. For any other software application you choose (Sound Studio 2.1, Audacity 1.2.3 or CDSpinDoctor 2.0), always set the Audio Input/Output Devices first before you start recording. a. For Audio Input: USB Audio CODEC b. For Audio Output: Built-in Audio 6. Some application will allow you to capture the audio straight to the format you want (MP3, ACC or others). Make this selection before you start recording.
Playback: - 16 bit - Sampling Rate 32 or 44.1 kHz - THD+N = 0.005% - SNR = 96dB Minimum System Requirements:
FAQs FAQs about your Instant Music device: 1. Test a short audio capture and playback for best results. a. To get the best results, try doing a short capture sample of your audio source, whether from a Tape or LP, and then play it audio back in your PC to find out if any adjustments are needed. b. Once you are satisfied with the results, go ahead and start your project using the application you selected to do the whole project. 2. Technical Support for this product is available from our website. a. Please visit www.adstech.com for support on this product. 3. Where to get more help for audio application. a. Access the Help from the application you are using for additional information. i.e.: i. Choose Help > GarageBand Help. 4. Capturing audio from a Turn-Table (LP). a. If you are using a Turn-Table, you must use a Pre-Amplifier to make sure you obtain the appropriate volume level for audio capture with the Instant Music device. b. Configuration should be: Turn-Table to Pre-Amplifier and then connect the audio output from the Pre-Amplifier to the Instant Music Left-Right RCA Input jacks. Product Specifications: Instant Music Specifications: Audio In: RCA Stereo (Left and Right) SPDIF (Toslink) Audio Out: RCA Stereo (Left and Right) SPDIF (Toslink) Power: USB bus power (no external supply needed) USB: USB 1.1 and USB 2.0 compatible as a Full Speed Device Audio Specs: Capture: - 16 bit - Sampling Rate 8, 11, 16, 22.05, 32 or 44.1 kHz - THD+N = 0.01% - SNR= 89dB
Page 9 of 12 Using GarageBand with Instant Music

MAC:

MAC G4 OSX Available USB port GarageBand, Sound Studio 2.1, Audacity 1.2.3 or CDSpinDoctor 2.0 CD burner for making audio CDs or MP3 CDs iTunes Audio Pre-Amp if using a Turntable

Page 10 of 12

Services If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product there are several options available to you as described in the technical support section of this manual. Your primary source for information and assistance is always your computer store or computer parts dealer. If your ADS product needs repair or replacement, contact your dealer for onsite repair service. The ADS Technologies technical support and customer service staff can aid in solving many problems. Our technical support department is available to repair any ADS Technologies product. You or your dealer must return products to our factory for repair or warranty replacement. Return/Replacement: If you need to return your ADS Technologies product you should return the product directly to the dealer or store where you purchased the product. Each individual computer store or dealer sets product returns policies for their customers. ADS Technologies, Inc. cannot be responsible for the actions or policies set by our dealers. If you desire to return the product for a refund, you must get the refund from the dealer or store you purchased the product from. If you purchased the product directly from ADS please see the Terms and Conditions of Sale on the reverse side of your sales invoice. Returns to ADS Technologies, Inc. are for repair or warranty replacement only. If you need to return product to ADS Technologies, Inc. for repair or replacement you must follow these steps. 1. Call our Technical Support department at (562) 926-4338 to obtain a Return Merchandise Authorization (RMA) number. 2. The RMA number is valid for 30 days. 3. Ship the product to the ADS factory with the RMA number marked on the inside and outside of the package. If there is no RMA number on the package or the RMA number has expired, the shipment will be refused. ADS will not be liable for lost or mis-shipped products. 4. Replacement product cannot be shipped to you until the defective product has been received by ADS. 5. Once the product is received at the factory it will be tested and then repaired or replaced. 6. Turn around time is approximately one week. A repaired or replacement product will be shipped back to you. Warranty: This ADS Technologies, Inc. product comes with a One (1) year hardware warranty. ADS Technologies, Inc. (ADS) warrants this product against defects in material and workmanship for a period of One (1) year from the date of original purchase from ADS or an authorized ADS dealer. This warranty applies only to the original purchase of the product and is not transferable. This warranty does not cover any incompatibilities due to the users computer, hardware, software or other related system configuration in which the product interfaces. Proof of purchase will be required before any warranty consideration by ADS occurs. This warranty does not cover any damage caused by negligence, non-authorized modifications, or parts installed without prior written permission from ADS. This warranty does not apply if the product has been damaged by accident, abuse, or misapplication, or as a result of service to the product by anyone other than ADS. If your ADS product is not in working order, your only recourse is repair or warranty replacement, as described above. UNDER NO CIRCUMSTANCES will ADS Technologies, Inc. be liable for consequential damages, including but not limited to any lost savings, lost profits, or any other damages, caused by the use of any ADS Technologies, Inc. product or inability to use the product, even if the dealer or ADS Technologies, Inc. has been advised of such liability or other claims. This includes damage to property and, to the extent permitted by law, damages for personal injury. This

warranty is in lieu of all other warranties including implied warranties of merchantability and fitness for a particular purpose. FCC Information: Federal communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio TV technician for help. Notice: (1) The changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. (2) Shielded interface cables and AC power cord, if any, must be used in order comply with the emission limits.
2004 ADS Technologies. All Rights Reserved First Edition: September, 2004 User Manual rev. 1.2 05.03.04 Apple and the Apple logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. GarageBand is a registered trademark of Apple Computer, Inc. ADS is a registered trademark of ADS Technologies Inc. ADS Technologies (ADS) makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The information furnished within this written document is for information purposes only and is subject to change without notice. ADS Technologies assumes no responsibility or liability for any errors or inaccuracies that may appear herein. ADS Technologies makes no commitment to update or to keep current information contained within this document.

Page 11 of 12

Page 12 of 12