Here you can find all about AEG-electrolux 6561G-M like manual and other informations. For example: review.
AEG-electrolux 6561G-M manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a AEG-electrolux 6561G-M please write about it to help other people. [ Report abuse or wrong photo | Share your AEG-electrolux 6561G-M photo ]
AEG-electrolux 6561G-M, size: 72 KB
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
INSTRUCTION- AND INSTALLATION BOOK Gas hob
Your New Appliance
Thank you for purchasing an AEG appliance. To enable you to use your new hob efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the hob be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. If you require further assistance or advice, please contact our Customer Care Department either by letter or telephone: Customer Care Department AEG Domestic Appliances 55-77 High Street Slough SL1 1DZ Tel: 08705 350350
Table of contents
Contents For the user Page no
Your new appliance... 2 Safety information... 4 Description of the product... 5 Operation instructions... 6 Inner- and outer burner ring... 7 Burner cover.... 7 Ignition electrode (A)... 7 Thermo couple (B)... 7 Ignition... 8 Maintenance and cleaning... 9 Splashguard... 9 Stainless steel surfaces... 10 The ceramic glass plate... 10 The gas burner... 11 Something not working.... 21 Service and spare parts... 22 Guarantee conditions... 23
For the installer
Technical data... 12 Important safety requirements... 13 Gas connection... 14 Mounting... 15 How to read the operating instructions: 1. 2.Step by step Safety information Hint and tips Environmental information
These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. Your safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance. Never use plastic or aluminium dishes on the hob. Never leave the hob unattended while deep fat frying, or heating fats and oils.
Young children must not be allowed to tamper with the hob or play with the controls. The hob gets hot when it is in use. Children should be kept away until the hob has cooled.
Do not install the hob if the ceramic glass is damaged or cracked. This hob must be installed according to the instructions supplied. Any installation work must be undertaken by a qualified competent person. Do not alter the specifications or attempt to modify the appliance in any way.
Maintenance and Cleaning
Only clean this hob in accordance with the instructions given in this book.
Repairs carried out by inexperienced persons may cause injury or serious malfunction of the appliance. Repairs must only be carried out by a qualified/competent person. Contact your local AEG Service Centre.
The hob is intended for domestic cooking only. It is not designed for commercial/industrial purposes. Ensure that all the control knobs are in the OFF position when not in use. Do not use the hob if it is damaged in any way, contact your local AEG Service Centre.
Make the hob unusable by cutting off the cable. Dispose of any packaging material and old appliances at an authorised disposal site.
Description of the product
Gas burner Control knob
The primary air intake aperture must never be blocked by objests of any kind at any time.
Symbols at each operating knob indicate which burner is adjusted with the control knobs. Left front burner Left back burner Right back burner Right front burner
Each operating knob has a ring showing the scale of markings. Off. Maximum flame Minimum flame
Burner cover/inner burner ring/outer burner ring
Together with the inner burner ring the outer burner ring forms a space where the final mixture of gas and air takes place in order for the gas burn correctly. Please note: It is very important that the inner burner ring/outer burner ring is placed correctly, together with the cover. See installation of the wok burner. If the burner cover/rings are incorrectly fitted the burner will not operate correctly, and the burner may be damaged within a short space of time. It is also important, that the inner air ring is placed correctly.
Ignition electrode (A)
The burner has been provided with an ignition electrode. As long as the operating knob is depressed, the automatic ignition will ensure that a spark is emitted between the ignition electrode and the burner cover. Ignition electrode (A) Thermo couple (B)
Thermo couple (B)
The gas unit features fully-secured gas taps (thermo-couple) In case the flame goes out, the thermo couple automatically prevents gas admission after a few seconds (Max. 90 seconds). Note: Gas will flow while the operation button is pressed - See start-up procedure.
1. Depress and turn the control knob for the burner to the left to max. flame. (Ignition position) 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the burner will be ignited. If it is not possible to connect the unit to mains, a match may be used to ignite the burner. 3. After starting the burner, press the control knob for approx. 10 seconds to activate the automatic thermo-couple (thermo sensor ready). 5. The burner can now be regulated between maximum and minimum
Maintenance and cleaning
For reasons of hygiene and safety, the cooking zones must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire.
The splashguard can be removed to make it easier to clean the surface. What to do: 1. Hold the splashguard as shown in the diagram. 2. Lift the splashguard straight up 3. Clean the top surface as described in cleaning the steel surface. Be aware of the two retaining pegs, which are sharp. 4. Replace the splashguard in position ENSURE that it is fitted the correct way round. Never use hard or sharp implements to lift off the splashguard. Do not wash the splashguard in a dishwasher. The hob must not be used with the splashguard off.
Stainless steel surfaces
Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis. Always polish in the direction of the steel finish (crosswise). Never use steel wool, metal sponges or other abrasive cleaning agents.
3. Wipe the ceramic hob clean with a damp cloth or kitchen towel. Tough stains can be removed by rubbing the stain hard with kitchen towel. 4. Wipe off remaining cleaning agent with a damp cloth. 5. Wipe with a dry cloth, if required. Make sure that the ceramic glass is dry when you heat it up again. Ceramic glass can develop rainbow-like stripes if heated while damp. Spillages must be removed immediately, while the burner is still warm, using a ceramic glass scraper. Especially damaging are melted plastic, aluminium, or any foodstuff containing sugar, including natural sugar, as these can create permanent pockmarks and craters on the ceramic surface. After cleaning, polish thoroughly with the cleaning agent supplied with the unit. Defects in the ceramic surface which can be related to the above are not covered by the warranty. Warning: Aluminium foil and plastic utensils should not to be placed on hot surfaces. The surface should not be used for storage.
The ceramic glass
Immediately scrape off stains caused by food which has boiled over, spilled sugar, dishes containing sugar (jam, juice, etc.), melted plastic and aluminium foil while the ceramic glass is still hot. If the ceramic glass is allowed to cool it may become damaged. After use the ceramic glass should be wiped with a damp cloth with washing up liquid. For severe soiling you can follow these steps: 1. Remove stains etc., with the ceramic glass scraper. 2. Make sure that the hob has cooled down. Use a ceramic cleaning agent such as vitroclen. Shake the bottle and apply a couple of squirts to the ceramic hob.
The gas burner
The operating panel with knob, pan support and burner covers/rings are to be cleaned with ordinary cleaning agents. Do not use any kind of scouring powder. Avoid saucepans boiling over. If water gets into the burner, this should be removed before re-igniting the burner, e.g. with a no-fluff cloth.
Type of gas Adjusted to natural gas: G20-20 mbar Category and pressures UK: II 20 mbar - 28/37 mbar 2H3+ Max. nominal load Q na HS: Small sized burner= 1,1 kW x 1 Medium sized burner = 1,9 kW x 2 Large sized burner = 2,7 kW x 1 Total= 7,6 kW FSD The unit features fully-secured gas taps (thermo-fuse). HS = Top calorific value Q = Nominal load ID. CE-048AU-0003 Ignition transformer= 50 HZ - 0,6 VA Radio-noise reduction This unit observes the current EECdirective on radio noise reduction. This gas appliance is -approved and marked in accordance with the gas appliance Directive (90/396/CEE), the low voltage directive (73/23/CEE) and the EMC directive (89/336/CEE incl. the agreed directive changes. Cable type: 0,75 mm HO5 V2V2-F
N LV 1N + PE
The hob must be connected via an external switch with a contact gap of min. 3 mm (the main switch may be used) Wiring
Blue and brown: 51 mm +/- 3 mm Yellow/Green: 61 mm +/- 3 mm
Important safety requirements
This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions. The hob should not be installed in a bed sitting room with a volume of less than 20 m. If it is installed in a room of volume less than 5 m an air vent of effective area of 110 cm is required. If it is installed in a room of volume between 5 m and 10 m an air vent of effective area of 50 cm is required, while if the volume exceeds 11 m no air vent is required. However, if the room has a door which opens directly to the outside no air vent is required even if the volume is between 5 m and 11 m. If there are other fuel burning appliances in the same room, B.S. 5440 Part 2 Current Edition, should be consulted to determine the requisiste air vent requirements. This hob must be installed by qualified personnel to the relevant British Standards. Any gas installation must be carried out by a CORGI registered installer. The maufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored
Connection to the gas supply should be with either rigid or semirigid pipe, i.e. steel or copper. The connection should be suitable for connection to RC ( BSP male conical thread). When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installaion. Ensure that the main connection pipe does not exert any strain on the hob. It is important to install the elbow correctly, with the shoulder on the end of the thread, fitted to the hob connection pipe. Failure to ensure to correct assembly will cause leakage of gas.
The unit should be pressure-tested at Max. 150 mbar.
Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm.
The distance to any shelves or tops of a cabinet under the hob is to be at least 47 mm.
Screw the fixing brackets out to such an extent that they can be turned in under the table top. Tighten the brackets on to Minimum distance the table top with an ordinary to side wall: screwdriver. 150 mm
Minimum distance to rear wall (nonflammable material): 50 mm
One rectangular hole is sawn out for the hob combination chosen. The depth of the cut-out for any unit is: 490 mm Reinforcement Length of hole = sum of all units` externally measured length, less 20 mm. beams
Mounting of Reinforcement Beams
A reinforcement Beam, with supporting flanges at each end, is included with each two-burner unit. For unit combinations, a reinforcement beam must be used between each unit.
It is not necessary to attach the reinforcement beam to the table surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. Installation in work tops with a base unit underneath If the hob is to be installed on top of a base unit, a board must be mounted underneath the hob (e.g. 16 mm chip board). Seal all joints with aluminium tape. The board can be mounted as shown in the diagram. This installation method prevents the flames from being extinguished if you close the door of the base unit hard. If the back panel of the cupboard unit is of thin 4 mm material, it will need to be reinforced. This procedure will prevent the gas being blown out if the cupboard door is slammed shut.
Min. 140 mm Min. 16 mm Aluminium-tape
Do not install the hob above drawers.
Combined installation with oven
If the oven is placed directly under the dropinette a metal plate must be installed in between. The metal plate is included in the installation kit intended for this combination. The kit, product number 970, can be ordered from your kitchen appliance dealer. This gas hob can be combined with AEG Competence ovens with a maximum power of 3,7 kW.
The units externally measured length
145 mm: Cooker hood 290 mm: Two-zone ceramic-top electric hob Two-burner gas hob Grill Fryer Wok 580 mm: Four-zone ceramic-top electric hob Four-burner gas hob 725 mm: Four-zone ceramic-top electric hob
Installation of a single unit
When mounting a single unit, be it a half-or full size unit, in a table surface which is thicker than 30 mm, it is necessary to make a special notch in both sides of the cut-out hole, as shown in the adjacent drawing. The purpose of these notches is to create space for the electrical cables.
In accordance with local requirements for domestic gas cooking appliances. Gas installation must only be carried out by an authorised person. For gas types see technical data.
The gas intake is situated at the lower rear of the appliance. The intake has a " conical pipe thread (see fig 1) If the appliance is to be connected to a gas cylinder, conversion with the optional modification kit will be necessary.
Something not working
If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the hob is under guarantee. Sympton: There is no spark when lighting the gas Solution Check hob is connected to the electricity supply. Check the fuse and replace if necessery.
When the operating knob is released the gas ring goes out again
The operating knob has not been depressed long enough, or has not been depressed sufficiently. Ensure the cover has been replaced correctly, e.g. after cleaning.
The gas ring burns unevenly
If after all these checks, your hob still does not operate correctly, contact your local AEG Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that it will be necessary to provide proof of purchase for any inguarantee service calls.
Service & spare parts
In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 929 Your call will automatically be routed to the Service Centre covering your post code area. In-guarantee customers should ensure that the recommended checks under the heading "Something Not Working" have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for in-guarantee service calls. Help us to help you Please determine your type of enquiry before writing or telephoning. When you contact us we need to know: 1. 2. 3. 4. Your name, address, post code and telephone number Clear and concise details of the fault. Date of purchase The model and serial number
This information can be found on the rating plate. Customer Care For general enquiries concerning your AEG appliance, or for further information on AEG products, you are invited to contact our Customer Care Department by letter or telephone: Customer Care Department AEG Domestic Appliances 55-77 High Street Slough, Berkshire SL1 1DZ Tel 08705 350350
AEG offer the following guarantee to the first purchaser of this appliance: 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation. 2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty material. The guarantee does not cover appliances where defects or poor performance are due to misuse, accidental damage, neglect, faulty installation, unauthorised modification or attempted repair, commercial use or failure to observe requirements and recommendations set out in the instruction book. 3. Should guarantee repairs be necessary the purchaser must inform the nearest AEG Service Force Centre. AEG reserves the right to stipulate the place of repair (i.e., the customer's home, place of installation or AEG workshop). 4. The guarantee or free replacement includes both labour and materials. 5. Repairs carried out under guarantee do not extend the guarantee period for the appliance. Parts removed during guarantee repairs become the property of AEG. 6. The purchaser's statutory rights are not affected by this guarantee.
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: The guarantee starts from the date you first purchased your product. The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products. This guarantee relates to you and cannot be transferred to another user. The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household. The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local service organisation is aware of your move and able to look after you and your appliances. France Senlis Germany Nrnberg Italy Pordenone Sweden Stockholm UK Slough
+33 (0) 29 29
+49 (0) 2600
+39 (0) 1678 47053
+46 (0) 79 10
+ 44 (0) 1753 219899
325 88-3700 Rev. 4-018
Casio CZ-1 ICF-C253 EMP-7300 T-4555 MHS-CM5 V LP770 AX34PRO LE-32R71B A5000-A4000-a3000-ex5-ex5r-ex7 DK-A10 DSC-W330 R DSL-2640R KD-DV5000 Combo 14PT2683 Doctor 350X 42PD8600 MS-192W UE-37C6000 Selector Enrxwi-G T2121 M7VKQ FS-SD7 HI-FI TY-ST42pa20 TRC-8080 Review 2243BWX S Kangoo Thinkpad A31 Videocd SN-700 Cabinet PRO Software-space-NVD-Z003-space-for-space-nve-n099P ST305004EXD101-RK Speed 10 Heater L16850 35C10 BM3982 AV 400 DEH-3250UB 663 WO NV-FJ628F Hksub 12 XR-P970F Rokr Z6 504II F1DS104P Chartplotter Di183F DVP-NS36 EOS350 D Mountaineer 1998 EWL20S5 CQ-DFX555 Mouse Coolpix S7C ERA-G100 BV-TS2 TM-U590 Tx9000A Lbtg2000 VGN-FW31J 20lcdm03B SF-8500 DE Luxe Shots5IS GGR50B HN 6135 EQ-3000 Beurer GS30 Lowrance X67C Wbr-3408 Vitesses Casio AT1 R08 AF WK-8000 SU-WH500 P2180 Elura 20MC WD10000H1q-00 EB-S6 CP-330 SLV-SE640N Champion 600 Secure SET ZWG5120 Squeezebox Duet KX-TC1720B FT-857D 42PFP5332 10 DSB-P990v DIR Toshiba D-R4 A-307R Nuvi 750T FOR Ps3 Galeo 4010 Autopilot
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101