AEG-electrolux Lavatherm 57700
Here you can find all about AEG-electrolux Lavatherm 57700 like manual and other informations. For example: review.
AEG-electrolux Lavatherm 57700 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a AEG-electrolux Lavatherm 57700 please write about it to help other people. [ Report abuse or wrong photo | Share your AEG-electrolux Lavatherm 57700 photo ]
AEG-electrolux Lavatherm 57700 Washing Machine, size: 595 KB
AEG-electrolux Lavatherm 57700
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
Please read these operating instructions through carefully, before using the appliance. Please ensure you fully understand the safety instructions on the first pages of these operating instructions! Retain this instruction book for future reference, and pass on to any future owners.
The warning triangle and/or the key words (Warning!, Caution!, Important!), emphasize information which is important for your safety or the correct functioning of the appliance. It is essential that this information is observed. This symbol guides you step by step when operating the appliance. This symbol gives additional information and practical tips on using the appliance. Tips and information about the economical and environmentally friendly use of the machine are marked with the clover symbol. If you require assistance or advice on your appliance, please contact our Customer Care Department by letter or telephone: Customer Care Department AEG Domestic Appliances Limited P.O. Box 47 Newbury Berkshire RG14 5XL Tel: Fax: 01635 42970
Printed on environmentally friendly paper. Whoever thinks ecologically also acts ecologically. 2
Important Safety Information. General Safety. Child Safety. Installation. 6 6
General Information. 7 Disposal. 8 Packaging. 8 Tumble Dryer. 8 Environmental protection tips. 9 Description of the appliance. Front view. Control panel. The program selector positions. 12 13
Before using the appliance for the first time. 13 Brief operating instructions. 14 Drying. Prepare the laundry. Open the door. Load the laundry. Select the drying program. Start DELAY TIMER. Start the drying program. Removing laundry or loading laundry when necessary. End of the drying process. Removing the laundry. Empty the water reservoir. Clean the fluff filter. Cleaning the condenser. Switch-off the dryer. 20 20
Program tables. 21 A small glossary of textile information. 23 Care symbols. 23
Cleaning and maintenance. Cleaning the filter area. Cleaning the drum. Cleaning the panel and operating parts. Cleaning the condenser.
Something not working?. 26 Replace the interior light. 28 Service & Spare Parts. 29 Guarantee Conditions. 30 For the installer - Safety information. 32 Technical data. 33 Electrical Connection. 34 Door Reversal Instructions. 36 Special accessories. 38 Drainage kit. 38 Stacking kit. 38 Index. 39
Important Safety Information
Your safety is of paramount importance, please ensure you read these warnings before installing or using the appliance. If you are unsure about any of the meanings of these warnings, contact the Customer Care Department.
Any electrical work required to install this appliance should carried out by a qualified electrician or competent person. Please follow the safety information in the installation section of this instruction book. This appliance is designed to dry normal domestic laundry. If the appliance is used for any other purpose or is incorrectly used, the manufacturer accepts no liability for any damages which may result. Switch off the appliance and isolate from the mains supply before carrying out any maintenance or cleaning work. Never operate the appliance if the mains cable is damaged or if the control panel, work top or base area are damaged allowing internal components to be accessible. Do not spray the tumble dryer with water. Do not dry textiles which have been treated with flammable cleaning agents and solvents. Clothes or articles of laundry which are dripping wet should not be placed in the dryer. Only load well-spun laundry. Laundry items containing sponge rubber or rubber-like materials must be not be dried in the tumble dryer. If the drying cycle is interrupted, the laundry or drum may be hot. Do not use the tumble dryer without the bulb cover in position. Do not operate the appliance with a damaged filter or with no filter at all. Do not overload the appliance. It is dangerous to alter the specifications or attempt to modify this product in any way. Adaptors and extension cables must not be used. There is risk of overheating!
Important Safety Information
Do not use the mains cable to pull the plug out of the socket. Repairs to the appliance should only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunction. Contact your local AEG Service Force Centre for repair. Washing that is in poor condition (heavily worn) and items with loose fillings (cushions) that could break open must not be dried. There is a risk of fire! Washing with rigid components (foot mats) will cover the air slots; the slots will also be covered if the drum is overfilled. Observe the maximum load of 5 kg. There is a risk of overheating which could cause a fire! Only dry washing that does not contain any explosive objects (fire lighters, spray cans). There is a risk of fire or an explosion!
The appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appliance. Pets and children have been known to climb into tumble dryers. Please check the drum before use. Keep all packaging away from children. When disposing of the appliance, cut off the mains cable and destroy the plug. Disable the door catch to prevent young children being trapped inside.
Check the appliance for transportation damage before installation. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Do not install the appliance on deep pile carpet. Ensure the appliance is level. If the tumble dryer is installed next to a fuel burning stove, a heat insulation non-flammable pad must be inserted between the fuel burning stove and the tumble dryer; (dimensions 85 x 57.5 cm).
eneral Information G
To prevent creasing do not exceed the maximum load stated in the program table. When using fabric conditioning sheets, we recommend the conditioning sheet is pinned (using a safety pin) to an article of laundry and placed in the tumble dryer. When using fabric conditioning sheets or drying starched washing in the tumble dryer, it is important to clean the drum to prevent a build up of any residues/deposits on the sensors. See maintenance and cleaning section. Please ensure the appliance is easily accessible to an engineer after installation.
Dispose of the packaging material correctly. All packaging materials are environmentally friendly and can be disposed of without any danger to the environment. The external plastic covering and bags inside are made of Polyethylen (marking >PE<). The padding is made of CFC free expanded polystyrene (marking >PS<).
When disposing of the tumble dryer. Cut off the mains cable and destroy the plug. Disable the door catch to prevent young children becoming trapped inside. Use an authorised disposal site.
Environmental protection tips
Your laundry will become light and soft in the laundry drier even without a soft rinsing agent. Loosen your laundry before loading it into the dryer. This helps to prevent lengthy running times and creasing. Ensure your laundry is well spun. In the following table we give an overview of specific electric consumption data depending on the spinning speed. This information is valid for 5kg laundry dried with the program COTTONS CUPBOARD DRY:
Pre-drying: Revolutions per minute 1600 Residual moisture in Litres 3.5 3.0 2.7 2.5 2.4 in % 47 Drying process: Required time in minutes 95 Power consumption in kWh 3.5 3.0 2.7 2.6 2.5
Environmental protection tips
Observe the maximum load instructions. Whenever possible, dry full loads. Choose the right drying program for the type and quantity of laundry. The drier will then operate as economically as possible. Some typical consumption values:
Drying program COTTONS CUPBOARD DRY1 COTTONS HAND IRON1 EASY CARES CUPBOARD DRY2 1) spun at 800 revolutions per minute 2) spun at 1000 revolutions per minute Fill weight in kg 2.5 Duration in Minutes 55 Power consumption in kWh 3.5 2.8 1.3
If the amount of laundry is not enough for a particular degree of drying (e.g. HAND IRON), you should dry it in stages for best economy: Fill the drier and select the program HAND IRON; after the end of this program take out your laundry for ironing. Finally dry the remaining laundry with the program CUPBOARD DRY. Only use the SPECIAL CARE button for loads up to 2.5kg! Clean the fluff filter after every drying program! Empty the water reservoir after every drying program!
Caution! The condensed water is not suitable for drinking or for use
with foodstuffs. You can use the collected condensed water as distilled water in the household, but first pour it through a paper filter bag. Clean the condenser regularly. The drier will operate more economically if you clean the condenser regularly.
Description of the appliance
Water Reservoir with handle flap
Feet (all height-adjustable)
Condenser Unit behind Removable Plinth
A B C D
A Program selector: To select the drying program B Drying degree indicator: Shows the achieved extent of drying; this enables you to take-out individual pieces of laundry at the right time during the drying process. C Buttons and display block AUDIBLE SIGNAL button: When switched-on, an audible signal is sounded at the end of the drying program; then take-out the laundry SPECIAL CARE button: For sensitive fabrics QUICK button: For faster drying DOOR button: For opening the fill-in door when the appliance is switched-on. START/PAUSE button: To start or interrupt the program. DELAY TIMER button: For pre-setting the start time in the range from 1 to 19 hours; indication in the PROG. TIME display field Multi-display/PROG. TIME display: Indicates the probable program duration or the time left of the currently set drying program; with postponed start time (DELAY TIMER button) indication of the number of hours left until the drying program starts; an error code is displayed in the case of a disturbance (C and a number). D Program run display: In each case the display for the current phase of the drying process is lit. E Instructions for the user: CONDENSER: Clean the condenser! EMPTY WATER: Empty the condensate container! CLEAN FILTER display: Clean the fluff filter!
The program selector positions
OFF: The tumble dryer is switched off. LIGHT: The drum light switches on when the door is opened. Program group COTTON: Programs for drying cotton and linen fabrics; maximum load 5 kg. Program group EASY CARES: Programs for drying mixed fabrics and synthetics; maximum load 2.5 kg. Time programs: For additional drying or for drying loads of less than 1 kg. COOL AIR Program: For smoothing creases in cold air; Slightly moisten the creased articles; Program duration: 10 minutes.
Before using the appliance for the first time
Wipe the drum of the dryer with a moist cloth.
Brief operating instructions
Ensure the laundry is well spun before tumble drying. Prepare the laundry. Load the laundry. Select the drying program on the program selector. Press the AUDIBLE SIGNAL, SPECIAL CARE or QUICK button if required? Start the program. While the program is running you can open the door to take-out laundry or add more laundry. At the end of the program: Remove the laundry. Clean the fluff filter. Switch-off the dryer. Empty the water reservoir. Check to see if the condenser needs cleaning.
Prepare the laundry
To prevent tangled bundles of laundry: Close zip fasteners; button-up bed linen and pillow cases; tie-together loose tapes, e.g. aprons. Empty all pockets. Remove all metal objects (i.e. paper clips, pins, etc.). Turn clothing consisting of double-layer fabric inside out (such as cotton-lined anoraks with the cotton layer facing outwards). The fabrics will dry better. Loosen the laundry.
Open the door
To open the door: Press firmly against the door (Press position ). or While the drier is switched-on: Press the DOOR button.
Load the laundry
Caution! Ensure the laundry does not get caught in the door when the
door is closed! This could damage the laundry! Load the prepared laundry into the dryer.
Select the drying program
Select the suitable drying program using the program selector (see "Program tables").
Grasp the handle flap of the water reservoir and pull-out completely.
Push the cover of the water reservoir to the side and pour-out the condensed water. Re-insert the water reservoir into the control panel.
The water reservoir has a capacity of approx. 3.8 litres. This is sufficient
for a laundry load of 5 kg which has been machine spun at 800 revolutions per minute.
Clean the fluff filter
To ensure efficient operation of the tumble dryer, clean the fluff filter after each drying program. Also check whether there are any remnants or fluff from the washing in the drum; remove immediately. Press the catch of the filter lid downwards. The filter lid will open.
Take-out the fluff filter. Remove fluff out of the fluff filter, with a moistened hand. Re-insert the fluff filter. Press against the filter lid until it catches into the locking device.
The filter lid cannot catch shut without
the fluff filter in place and the door cannot be closed.
Warning! The dryer must not be operated with a damaged or blocked
Cleaning the condenser
See the section "Cleaning and care, cleaning the condenser".
Program group COTTONS
care symbols &, %; maximum load 5 kg
Program EXTRA DRY Laundry Type Heavy weight or multilayered fabrics Examples for Towelling material, bath robes
Fabrics of medium weight, articles not made up of multi- Towel laundry, hand towels layers Lightweight materials requiring ironing Normal cotton and linen articles Cotton and linen articles, to be ironed by rotary ironer or starched laundry Cotton shirt and underwear Sheets and pillowcases, tablecloths Cotton sheets and pillowcases, tablecloths
DAMP HAND IRON
Program group EASY CARES care symbols &, '1, %; maximum load 2.5kg
Program EXTRA DRY Laundry Type Heavy weight or multilayered fabrics Lightweight materials which do not require ironing Lightweight synthetics and cotton/polyester mixtures requiring ironing Examples for Sweatshirts, bed linen and table linen Easycare fabric shirts, table linen, baby clothes, socks and underwear Bed and table linen, easycare fabric shirts and blouses
1) Press the SPECIAL CARE button!
TIME programs care symbols &, '1, %; loads less than 1kg
You can select 20, 40 and 60 minutes program duration for additional drying of individual pieces of laundry or to dry small quantities. 1) Press the SPECIAL CARE button!
COOL AIR Program
The laundry is treated for 10 minutes in cold air; for smoothing creased clothing.
A small glossary of textile information
Ensure articles to be dried are suitable for tumble drying. If they are one of the following symbols should be present on the care label:
%This fabric can be tumble dried. The fabric manufacturer does not stip&Normal drying 'Drying with special care (press the SPECIAL CARE button!) (Do not tumble dry
If you do not find any of these care symbols: Dry whites and coloureds as well as mixed fabrics at normal temperature. Press the SPECIAL CARE button if you are drying delicate fabrics. Wool Do not dry any woollen items in the dryer. Fabrics sensitive to temperatures Dry fabrics sensitive to temperatures (such as acrylic or viscose) and textiles with the care label ' with the SPECIAL CARE button selected. Cotton jersey and hosiery have a tendency to shrink! Do not dry these fabrics excessively. New coloured textiles To avoid the possibility of dye transference do not dry new coloured textiles together with light-coloured laundry.
ulate if the piece of laundry should be dried on a normal or gentle program.
Cleaning and maintenance
Cleaning the filter area
Important! When the FILTER display lights, it is essential to clean the
fluff filter. Otherwise your dryer might suffer damage. A small amount of fluff may reach the area around the filter in spite of the fluff filter. Therefore you should clean the entire filter area from time to time, or at least every three months.
Remove the fluff filter. Hold the filter lid by the top and pull it forwards until it is released from both holders. Remove the fluff from the entire filter area preferably with a vacuum cleaner. Press both pins of the filter lid into the holders on the door until they click in. Reinsert the fluff filter. Press against the filter lid until it clicks into the lock.
Cleaning the drum
Warning! Do not clean the stainless steel drum with abrasive deter-
gents or steel wool! Wipe the inside of the drum and the drum fins with white vinegar to avoid any residues/deposits effecting the sensors. This is particularly important if you regulary use fabric conditioning sheets or dry starched items in the dryer.
Cleaning the panel and operating parts
Warning! Do not use household furniture polish or aggressive detergents. Wipe over the panel and operating parts with a damp cloth. Only use warm water.
Important! When the CONDENSER display lights, it is essential to clean
the CONDENSER. Otherwise your dryer might suffer damage. In addition energy consumption will be increased if the CONDENSER unit is covered with fluff.
Open the door. Press on the two tabs to unlatch and take off the removable plinth.
Turn the two securing disks through a quarter turn each outwards.
Pull the CONDENSER out of the base by the handle. Clean the CONDENSER, best with a hand-held brush or by rinsing with a hand-held shower head. The water removal slits on the rear of the condenser must be free too.
Important! Do not use any sharply pointed objects to clean the CON-
DENSER. They could make it leak. Reinsert and push in and turn each one of the two securing disks through a quarter turn inwards. The words "top oben en haut" must be at the top. Re-mount the plinth.
Important! The dryer must not be operated without CONDENSER.
Something not working?
If the tumble dryer is not working correctly please carry out the following checks before calling out an engineer.
Symptom Possible cause The appliance is not plugged in The fuse has blown The START/PAUSEbutton has not been pressed The tumble dryer will not start No program has been selected The door is not properly closed The water reservoir is full The wrong program has been selected Fluff filter blocked Condenser unit covered with fluff The tumble dryer has been overloaded The results are unsatisfactory Laundry not sufficiently spun prior to tumble drying The vent in the base of the appliance is covered A residue may have formed on the drum interior, blocking the sensors Select the required program Close the door Empty the water reservoir Select a different program Clean the fluff filter Clean the condenser unit Observe the maximum loads stated for each program Ensure the wash load is well spun before tumble drying Ensure the vent is clear Solution Plug in the appliance Check the fuse Press the START/PAUSE button
Clean the inside of the drum with white vinegar
Symptom Possible cause Is the tumble dryer plugged in The drum illumination does not work Solution Plug in the tumble dryer
The program selector is in Turn the program selector the OFF position dial to LIGHT The bulb needs replacing Replace bulb Clean the condenser unit Clean the fluff filter Connect the mains plug Set a program. The fill-in door can be opened at any time by pressing firmly against the door (pressing location )
The drying process takes unusually long
The condenser unit is covered with fluff Fluff filter is clogged Electric mains plug not connected
The fill-in door cannot be opened with the DOOR button Program selector set to OFF
The door cannot be closed
Fluff filter has not been inserted correctly and/or the filter lid not closed Condensate container full
Replace the fluff filter and ensure the filter lid is closed Empty the condensate container With the container pulled out, switch on the appliance momentarily. The blockage can be removed from the container shaft or the hair cleaned out of the valve Select time program or higher drying stage (e.g. EXTRA DRY instead of CUPBOARD DRY)
Display EMPTY WATER is lit
EMPTY WATER indicator illuminated, even though the container has already been emptied
Foreign bodies, e. g. animal hairs, can block the inlet nozzle as well as the valve on the end of the EMPTY WATER container
The dryer terminates the drying process automatically: END is displayed shortly after program start; no display of the extent of drying
Too dry or too little laundry filled-in for the selected program
Symptom The drying process takes unusually long. 4.5 hours after the beginning of the drying process: - END display flashes - acoustic signal sounds - discontinuation of the drying process - error code C6 is displayed Possible cause Solution Check the program selection: SPECIAL CARE button appropriate only for laundry amounts up to 2.5kg Reduce the amount of laundry filled-in Pre-dry the laundry more thoroughly
SPECIAL CARE button pressed and too much laundry filled-in Too much laundry filled-in Laundry too damp
If after these checks, the tumble dryer still does not work, contact your local AEG Service Force Centre. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
Replace the interior light
A replacement bulb can be purchased through your local AEG Service Force Centre (Part No: 647072580).
Warning! Never use standard light bulbs in your Lavatherm.
Isolate the appliance from the mains supply. Screw-off the bulb cover. (The bulb is located at the top behind the door; see Front view). Replace the defective bulb. Screw-on the bulb cover. dryer must not be operated, without the cover in place.
Warning! For safety reasons the bulb cover must be screwed-on. The
Service & Spare Parts
If after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre. In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for in-guarantee service calls. Service & Spare Parts If you require a service engineer or wish to purchase spare parts, contact your local AEG Service Force Centre, by telephoning
Help us to help you Please determine your type of enquiry before telephoning. When you contact us we need to know. 1. Your name, address and post code. 2. Your telephone number. 3. Clear and concise details of the fault. What is the fault? When does the fault occur? 4. The model, production number and product identification number. 5. Date of purchase. This information can be found on the rating plate, so you have these numbers to hand we recommend you write them below. PNC no... S no..
Customer care For general enquiries regarding your AEG appliance, or for further information on AEG products please contact our Customer Care Department AEG Domestic Appliances Limited P.O. Box 47 Newbury Berkshire RG 14 5XL Tel: Fax: 29
AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation. The guarantee does not cover commercial use. 2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty materials. The guarantee does not cover appliances where defects or poor performance are due to misuse, accidental damage, neglect, faulty installation,unauthorised modification or attempted repair, commercial use or failure to observe requirements and recommendations set out in the instruction book. This guarantee does not cover such parts as light bulbs, removable glassware, dust bags or filters. 3. Should guarantee repairs be necessary the purchaser must inform the nearest customer service office (manufacturers service or authorised agent). AEG reserves the right to stipulate the place of the repair (i. e. the customers home, place of installation or AEG workshop). 4. The guarantee or free replacement includes both labour and materials. 5. Repairs carried out under guarantee do not extend the guarantee period for the appliance. Parts removed during guarantee repairs become the property of AEG. 6. The purchasers statutory rights are not affected by this guarantee.
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: The guarantee starts from the date you first purchased your product. The guarantee is for the same period and to the same extent for labour and parts as exist in the new country of use for this brand or range of products. This guarantee relates to you and connot be transferred to another user. Your new home is within the European Community (EC) or European Free Trade Area. The product is installed and used in accordance with our instructions and is only used domestically, i. e. a normal household. The product is installed taking into account regulations in your new country. Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0) Germany Nrnberg +49 (0) 2600 Italy Pordenone +39 (0) Sweden Stockholm +46 (0) 7910 UK Newbury +44 (0) 1635 572700
For the installer - Safety information
Check the appliance for transportation damage before installation. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Do not install the appliance on deep pile carpet. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. This tumble dryer is designed to be vented through to the open air. It should have its own ventilation system which should not be joined with any other ventilation system connected to any other appliance. The dryer must not be vented into a chimney, or flue pipe designed to carry the exhaust from a fuel burning heating appliance. If the tumble dryer is installed next to a fuel burning stove, a heat insulation non-flammable pad must be inserted between the fuel burning stove and the tumble dryer: (dimensions 85 x 57 cm). If the dryer is installed in a room with a fuel burning heating appliance, consult your local Corgi registered installer. The tumble dryer should not be installed in situations which may be subject to freezing temperatures. The installation site must be well ventilated. Ensure the appliance does not stand on the electrical supply cable. If the machine is situated on carpeted floor, please adjust the feet in order to allow air to circulate freely. The tumble dryer must be level. Observe the safety precautions in the operating instructions for your dryer.
Height x Width x Depth Depth with the door open Height adjustable from Empty weight Load (depending on the program) 85x60x60cm 117cm 1.0/0.4cm approx. 46kg max. 5kg
Power consumption in acc. with IEC 1121 s.e. 3.5kWh (5 kg Cotton, spun at 800 revolutions per minute, program COTTON CUPBOARD DRY) Area of use Household Permissible ambient temperature +5C up to +35C
This appliance complies with the following EC directives:
73/23/EEC of 19/2/1973 Low voltage directive 89/336/EEC of 3/5/1989 EMC directive including the Modification directive 92/31/EEC
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING - THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is located inside the door.
The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS 1362) fuse must be used. Should the plug need to be replaced for any reason. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow : Earth Blue : Neutral Brown : Live
Green & Yellow
The wire coloured green and yellow must be connected to the terminal marked with the letter E or by the earth symbol or coloured green and yellow The wire coloured blue must be connected to the terminal N or coloured black. The wire coloured brown must be connected to the terminal marked L or coloured red. Upon completion there must not be cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.
WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.
In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point.
To ensure correct operation: The appliance must be level. Use a spirit level if necessary and adjust the feet to compensate for any unevenness in the floor. The surrounding area must be kept clean, free of dust and fluff. Do not install the appliance where the temperature may fall below freezing or rise above 35 C. Do not install the appliance on deep pile carpets or obstruct the front ventilation grille, as this will affect the air circulation and could lead to a build-up of heat which would adversely affect the operation of the machine.
Door Reversal Instructions
The door opening direction can be changed if required.
Warning! Before reversing the door, isolate the appliance from the
mains supply. Proceed as follows to reverse the door opening direction:
Un-screw the screws A on the front panel of the appliance. Take-off the door by displacing it horizontally. Un-screw the screws B on the inside of the door and take-off the hinges C. Unscrew and take-off the locking block D. Release the coverplates E, F and G with a thin screwdriver by pressing on the latching device, displace them to the side. Take them out and insert them again on the opposite side. Screw-on the hinges C and the locking block D on the opposite side of the door. Screw-off the door catch H, take it out and pull-off the plug. 36
Take-out the latched catch covering J and pull-off the plug. Connect the door catch H and the catch covering J on the respective opposite side to the plug, insert into the break-out and screw-down or latch into position. Push the door with the hinges into the breakouts provided for them in the front panel of the appliance and firmly attach it with the screws. After changing-over the door, check that the DOOR button functions correctly.
Warning! The appliance is safe again for operation only when all plastic parts have been mounted.
You can obtain the following special accessories from your retailer.
A drainage kit (E-No. 000) can be purchased to adapt the dryer to drain the condensed water into an existing drain, sink etc. This eliminates having to empty the condensed water reservoir, although the reservoir must still be inserted into the control panel of the machine.
With these kits you can combine your laundry dryer with any LAVAMAT automatic washing machine to a washing and drying column. The appliances are stacked in space-economising manner in this arrangement, the washing machine at the bottom and the laundry dryer at the top. The following two kits are available: without plate with extendible deposit plate E-No. 900 E-No. 901
Acrylate. Acrylic. Anorak. AUDIBLE SIGNAL. AUDIBLE SIGNAL (button). 18 29
Safety Information. 5 Service & Spare Parts.29 SPECIAL CARE.15 START.17
Closing the door. Condenser. Connection. Control panel. Cool-down phase. Crease protection phase. Customer care.
Water reservoir.19 Wool.23
Easy-care fabrics. 23
Filter area. Fluff filter. Front view. Furniture polish. 11 24
Glossary. 23 Guarantee.30, 31
Installation.6, 32 Interior light. 28 Ironing. 10
Opening the door. 15
Rating plate. 29
MW82N-X Instruments CBL C5730 VTX 1000 28ST2781 Palm Pixi Sumlog XBV410 FAR-2127 RM318PU System CDP-CX455 M7720 Cavalier 2000 MCV903-A0U Cube-15X RE20 EDS Singer 35-1 LX3600D 22 Apple Idvd Edition USR8000 VLF5125 Sweeper LVC-CY100NM Vigor 2910 EMP-TW2000 N5005 Replicator II ADP553 Precision Bass Volant DVX286 Triton 2000 31A-664 PT-P1SDE PRO100 Gates SC164VS MD 46 250-2002 Yamaha DD-6 Urc-6211 Avn2227p Drive Nexstar 4GT Review X-925 Power I 25100 T Shot Z115 RS21fcns BS900 LH-T552SB AV-21AT-av-21 Blasi R6 ERB40402W8 DTH8000 Radio MS7057CT Camera IC-F14 ADP1433F CFD-S32 Configuration S10 2002 ZX-50 LE32A436 Tablet 8 LTV-37W2 HD R-863 OHM120-224602A FE-240 LW-A0510CL 13 0 MXH675 BH-208 U100E D-NE20LS 42PFL7603D 10 CS-575 Eu R05 EUF2300X Ksgz300-1 1200 GS LP722 Inter-TEL 8660 5100 WG Notebooks Advanced 2B26H77c5 DPC-551 DSC-6 AFC NEO TUE-T012 PAS6000E HDR-CX370V Navigation MFD2 Automatic ME102 ER2821B
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101