HOMELITE

TM523 BCH-20,24,2D,32C,33,33B,33DI,33TO HBC30,30B,38,40,HK-14,18,24,28,33,38,PCB3600,3600E,PLT3400,ST155,175C,185C,285C,385C,ST485,ST485C ST360,ST385,SXD20,TK518,NBA524,PMB522,TXD508 BCH38,BCH40,BCH48,PBC3800,PBC4000 NBA524,PMB522,TXD508
UH41, SXD-25HE UMK422LTE/UT4E/LT4E
Tabla de aplicaciones adaptadores

HUSQVARNA

24R (antes 1987) 265RX,250RX,245RX,135R,132RD,132LD,125R,25R,125RD,125LD,125RB,132RL,245R,125L,132L,125RJ,125RJD, 26R,235R,32L,120L,225L,225LD,227R 232L,232LCAT,32R,225RJ,225R,RD,232R,232RCAT,322L,325LX/XT,325RJX,322RJ,325RX/RXT 235RCA,240R,240RBD,250RX,245R,245RX,265RX,140R,165R,244R,244GX,244GX,36R,39R,16R,18RL,22RL,240RJ, 142RB,152RB,252RX Mondo MEGA, Mondo Maxi 26L 16R,25R (antes 1987)

7x1,00 LHM

12x1,75 LHM 10x1,25 LHF
12x1,75 LHF 3/8"x0,24 LHF 3/8"x0,24 RHF 8x1,25 LHM 8x1,25 LHM 3/8"x0,24 RHM 8x1,25 LHM 10x1,25 LHM 7x1,00 LHM 9x1,25 LHF 8x1,25 LHF 8x1,25 LHF 8x1,25 LHM 10x1,25 LHF 12x1,75LHF 8x1,25 LHF 7x1,00 LHM

IKRA ISEKI / SHINDAIWA

BT 1045 DYB190,DYB191 DYB251,DYB252,DYB254,DYB261,DYB262,DYB321,DYB322 DYB351,DYB453,DYB354,DYB454 DYB201,DYB202,DYB231,DYB232 IC12,ICD13,IC15,IC16,IC17,IC18,ICD13,K16,K17,K18 IAX180,190,250,350,400,500

JONSERED

G25RD 300,400,LR200/B/L, LR260B/L BP40 Combi,BR400/450,GR26COMBI,GR26D/L,GR32L/CAT,GR44,GT21/22/24,RS44,BP2040C,GR3032D/L GR32D/CAT,GR36/CAT,GR41/50,R38/45,RS30/38/40/45,RS51PRO,RS52,GR2036,BP2052,BP240C G25RD
V20 K10,K20,K2020,K2Q,K2Q20,K30,KLQ,KOB20B,KPQ/20,KQ,KQP20,KQT130,KT12,RQ20,U10,V15/18/25,VP15/20, VS220/230/250,VX230/260 KQ20,V10 410,J40/BD/HD,J400/GX,JLKT200,JQ/40/50,JQG4K,JQT200,K40D/BD,KQ30/NE,KT10,KT 1B/1S/30,KW30NE,JQT200, K400/BD,KQ30/NE,KT10/18/1S/30,KW30NE,RQ30/40,RX350/351L,TI70,240/410,V190/35/40,V420/520,VNX540, VRX360/440/540,VX221/251C/360/360S,VX440

8x1,25 LHF 8x1,25RHF

10x1,25 LHF 7x1,00 LHM 8x1,00 LHF

KOMATSU ZENOAH

BC220DL,BC221DL,BC17,BC23,BC32 BC2300DL BC254A,BC260DM/DUM,BC260DM,BC340DWM/FW,BC341DWH,BC431DWM,BC432FWM,BCD20,BCF01,BK345FL, BK435FL,BK530DL BC431FWM,BC531DWM,BC532DWM,BK531DL,FBC22,FBC26
8x1,25 LHM 10x1,25 LHM 8x1,25 LHM 8x1,25 LHF 8x1,25 RHF 10x1,25 LHF 10x1,25 LHM 10x1,25 RHF

MC CULLOCH

BP30AV,DELTA,MS33/40,S'MAC30AV,TD2400/3300/4000 MAC22/23/30/38 MAC17/25 100A,90/A,95A,99A,EB3,MAC80/90/95A,PS1/2/3/4/5,SEB4,SM100,SMAC30AV,SAMV38AV, TD2100,MAC32,MAC37 MAC60A,MAC80A SUPERMAC26,MAC30A,30AV,PRATER30,EUROPA92/35A,EUROPA,MS24,MS52,PROMAC38AV,BP38AV, WINDSORKIT26,VERSAILLES38,BP26AV,BP35AV MAC85A,MAC90A,MAC95A,SMAC30AV,SMAC38AV 60,60A,70,80,95,EB2

10x1,50 LHM 10x1,25 LHF 3/8"x24 RHF 8x1,25 LHM 12x1,50 LHF

MAKITA

RBC230,RBC260,RBC310,RBC410,RBK410,RBC525 DBC3300,DBC4000,DBC4000C

MARUNAKA

BC180/181DX,BC200/240DX,TM2/21/24DX/F3L BT181DX G13K BC480DX,G3/5,GL3K,T240DX/F53/L TM33DX/F43L,TM33DX/F43,T200DX/F43L,T200DX/F43,TM33JX/F404L, T200JX/F404L,BC220DX,BC400DX,BK404FX
8x1,25 LHF 8x1,25 RHF 10x1,25 LHF 10x1,25 LHM 10x1,50 LHF 8x1,25 LHM 10x1,25 LHM 10x1,50 LHF 10x1,25 LHF 8x1,25 LHF 8x1,25 LHM 10x1,00 LHF 10x1,25 LHF 12x1,75 LHF 8x1,00 LHF 10x1,50 LHF 8x1,25 LHM

MARUYAMA

BC184/C,BC220DE,BC230/241/326/330/402/480,BC331BK,MB100/250/300/400/500 32,BC200C,BC260/H,MC260/S

OLEOMAC

TR60E,TR101E,720,SPARTA26TR,725B 725BL,722/726S,SPARTA26S,SPARTA26,725S/T/D,730S/T,735S/740S/T,746S/T,735S/T,755MASTER,435/440/446/453BP

PARTNER

B400 200,203,205,B250C,B250V (antes 1987), T250,B323,B325 B370,B380,B180,B440,B450,B405,B250C/V,B250U,B450G,B450/C,B265J,B405 T221,T321,B322

POULAN ROBIN

150,200,2620,800,900 NB30K,NBR30/40 NBK411,NB02,NB16F,NB211,NB26,NB281A,NB31/AU,NB351,NBA231,NBK411,NBT415,IVBF231,NB231,NB23F, NBF171,NBF231 IVB50L,NB03/4,NB411L,NB50L
8x1,25 LHF 10x1,00 LHF 8x1,25 LHM 8x1,25 LHF 10x1,25 LHM 10x1,50 LHF 12x1,75 LHF 7x1,00 LHM 8x1,25 LHM 10x1,25 LHM 8x1,25 LHM
180KS/S,3318,REK285BP RD1605,RD2414,RD3818 RD5224,RD5225,RSB2801,RSH1100 RD260 RD330,RD430,RD520

SHINDAIWA

C20/230,LT18/20,T18/20/A,T230/XR,T23E,T35 BP35/45,C23/25/27,C250,F20,R2025/35F,T25/27/250,T260/270/350,YARDWARE220 B35/40/45,BP35,C35,RC35/45,F18
FS50,FS51,FS60,FS61,FS65,FS80E,FS90AVE FS44,FS52,FS56,FS66,FS86,FR106,FS74,FS74R,FE55,FE36,FS88,FR108,FS40,FS76,FS76R,FS106,FS108,FS48, FS52,FS62,FS81,FS96 FS160,FS220,FS55/R,FS25-4/R,FS65-4/R,FS80R,FS85/R/RT 420,FS08,FS150/180,FS20,FS200,FS280/K,FS353AV,FS360,FS410,FS420,FR350/450,FS350/450/400K/450K,FS400/L, FS500,FS550

10x1,00 LHF 10x1,50 LHF

12x1,50 LHF 8x1,25 LHF 10x1,00 LHF 10x1,25 LHF 10x1,25 RHF 12x1,50 LHF
FS125,S200,S300 123,125,Multimol 100,130S,014,119,400,FS135,FS136,S100,S400 115,118 124,126,127,128,130,134,137,140,141

TAS TANAKA

AST250/5000/7000,SUM250,SUM301/321/321E/351/400,SUM421/500/7000,TBC16/150/162/20/2000,SUM205/215/220/2200, TBC225-255,TCB23/232/2507250DH/262/265/265SDH/262,TBC265,TBC265SDH/30/300/322/355/37/373/4000/422/422BDH, TBC4500/500/5000/500DH/501/202,TBC300SDH/355DH,TST218,TUM220,TUM250 SUM3 TBC16,AST5000,TBC5000,TBC4000 8x1,25 LHM 10x1,25 LHF 8x1,25 RHF 7x1,00 LHM 8x1,25 LHM 10x1,25 LHM

XENOAH

Carlton UK cover

01-05-2006

Page 1

Carlton Forestry

w w w. k r a m p. c o m

FOLTP001UK

Page 2

CARLTON FORESTRY
1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.2.1 2.2 2.3 2.3.1 3.2 3.3 3.4.1 Saw Chain Symbol Identification Technical Specification Chain Types Part Numbering System Chain Cross Reference List Spare Parts and Filing Specifications File O - Plate Chain Sharpening Reference Table Guide Bars Guide Bar Classification Part Number System Chain Saw and Bar Reference List Guide Bar Cross Reference List Drive Sprockets Sprocket Classification Rim Sprocket Cross Reference Table Rim Sprocket Types Sprocket Classification Table Accessories Accessories for Chain and Guide Bars

Carlton UK inside

DEAR CUSTOMERS,
We would like to take this opportunity to introduce to you our new Chain Saw Accessory Catalogue. To complete our range we have decided to introduce the Carlton Range of saw chain, guide bars and accessories. The Carlton Company is based in the USA and produces high quality chain for professional and domestic use. The program also covers a comprehensive range of Guide bars and drive sprockets. To complement these products Carlton also produces a range of chain saw consumables. Please take time to look through our catalogue and feel free to contact us if you require any further assistance. Kind Regards Kramp UK Ltd

SAW CHAIN

1.1 SYMBOL IDENTIFICATION

Chisel

Semi-Chisel

Bumper Link

Narrow Kerf

Filing Angle

1.2 TECHNICAL SPECIFICATION
Every Carlton saw chain is built with these important features; Nickel Alloy Steel All Carlton drive links, tie straps, guard links, and cutters are fabricated from special alloy steel. This specially engineered steel adds toughness, abrasion, resistance and ductility in all kinds of climates, from the heat of the tropics to the freezing cold of winter 1. Industrial Chrome Plating. All Carlton saw chain cutters are plated with hard industrial chrome. This process yields superior edge-holding qualities to other types of plating. In the field, Carlton saw chain stays sharp longer. 2. Exclusive Honed Sharp Cutters. Another Carlton exclusive, unlike the competition, every Carlton saw chain is sharpened after assembly and is ready for immediate use. Theres no need to pre-sharpen the chain before use. 3. Roto Blasting. All Carlton saw chain cutters, drive links and bumper links are roto blasted for increased tensile strength. A similar process is used on automotive leaf springs, this makes Carlton parts tougher. 4. Hypodermic Lubrication. All Carlton saw chain is injected at the rivet bearings with a hypoid lubricant to reduce bearing wear during break in. Only Carlton pre-lubes each bearing during assembly for longer chain life.
Carlton Quality Auditing. Carltons Quality Auditors are as tough as the Carlton chain. They inspect all phases of the manufacturing process to some of the tightest tolerances in the industry. There are several styles of Carlton saw chain suitable for most chain saws. Cartlon recommends that you select the cutter style that is best suited for your cutting conditions. Please use the guidelines and instructions that are stated in the saw chain manufacturers manual.

Page 3

1.3 CHAIN TYPES
Hobby Chisel Chain with Bumper Link
Semi chisel chain without bumper link

Order code Order code

1/4"

0.50" / 1,3 mm

E1MC-BL
.325".325".325"
0,50" / 1,3 mm 0,58" / 1,5 mm 0,63" / 1,6 mm

K1C K2C K3C

Narrow cut hobby semi chisel chain with bumper link
Chisel chain with bumper link

Order code

3/8" LP

0,43" / 1,1 mm

N4C-BL

K1L-BL K2L-BL K3L-BL

Hobby semi chisel chain without bumper link Semi chisel chain without bumper link
3/8" 3/8" 3/8" 0,50" / 1,3 mm 0,58" / 1,5 mm 0,63" / 1,6 mm
Hobby semi chisel chain with bumper link

A1EP A2EP A3EP

N1C-BL
Semi chisel chain with bumper link

3/8" 3/8" 3/8"

A1LM-BL A2LM-BL A3LM-BL

Chisel chain without bumper link

.325"

K1NK-BL

.404".404"

0,58" / 1,5 mm 0,63" / 1,6 mm

B2LM B3LM

Page 4
1.4 PART NUMBERING SYSTEM

Example: A2LM-BL-60E

A 2 LM BL 60 E

3/8 Pitch

.058 Gauge

Magna Chisel

Drive Link

Endless Loop

Example: A2LM-BL-025R

A 2 LM BL 25 R

3/8" Pitch

Long Roll

A B E K N
3/8".404" 1/4".325" 3/8" LP
.050".058".063".043"

(1,3 (1,5 (1,6 (1,1

mm) mm) mm) mm)

C EP L LM MC NK

Champion Semi-Chisel Typ "E" Prof. (semi chisel) Chisel Magna Chisel Micro Chisel Narrow Kerf

BL Bumper Link

60 Drive Link 25 Long Roll (100Ft)
E Endless loop R Foot (per Foot)

(25 or 100 Ft)

1.5 CHAIN CROSS REFERENCE LIST
Carlton Chain Type Chain Pitch Drive Link Size Oregon Stihl Windsor Husqvarna Dolmar
N1C E1MC-BL K1L-BL K2L-BL K3L-BL K1NK-BL K1C K2C K3C N4C-BL N1C-BL A1LM-BL A2LM-BL A3LM-BL A1EP A2EP A3EP B2LM B3LM
Hobby Chain Hobby Chain With Bumper Link Chisel Chain With Bumper Link Chisel Chain With Bumper Link Chisel Chain With Bumper Link Narrow Kerf Chain with Bumper Link Semi-Chisel Semi-Chisel Semi-Chisel Hobby Chain With Bumper Link Hobby Chain With Bumper Link Chisel Chain With Bumper Link Chisel Chain With Bumper Link Chisel Chain With Bumper Link Semi-Chisel Chain Semi-Chisel Chain Semi-Chisel Chain Chisel Chain Chisel Chain
3/8" LP 1/4".325".325".325".325".325".325".325" 3/8" LP 3/8" LP 3/8" 3/8" 3/8" 3/8" 3/8" 3/8".404".404"
.050" (1,3 mm).050" (1,3 mm).050" (1,3 mm).058" (1,5 mm).063" (1,6 mm).050" (1,3 mm).050" (1,3 mm).058" (1,5 mm).063" (1,6 mm).043" (1,1 mm).050" (1,3 mm).050" (1,3 mm).058" (1,5 mm).063" (1,6 mm).050" (1,3 mm).058" (1,5 mm).063" (1,6 mm).058" (1,5 mm).063" (1,6 mm)

91VS 25AP 20LP 21LP 22LP 95VP 20BP 21BP 22BP 90SG 91VG 72LP 73LP 75LP 72DG 73DG 75DG 58LG 59LG
63PM 23RM2 25RM2 26RM2 23RM 61PMN1 63PM1 33RS 35RS 36RS 33RM 35RM 36RM 45RS 46RS
50R 50JLG 58JLG 63JLG 50J 58J 63J 50RG 50ALG 58ALG 63ALG 50A 58A 63A -
H36X H00 H21 H30 H22 H27 S28 H36X S46 H41 S45 S54 686

Page 5

1.6 SPARE PARTS AND FILING SPECIFICATIONS

DEPTH GAUGE SETTING

SIDE PLATE ANGLE
85 - 90 or 60 - 80 for chisel cutters

TOP PLATE FILING ANGLE

FILE ANGLE
90 or 80 for Chisel cutters
Packaged Quantities (25 pcs.)
Carlton Chain Links Tie strap Pre-set Tie Strap Depth Gauge Setting 1 Side Plate Angle 2 Top Plate Filing Angle 3 Top Plate Filing Angle Top Edge File Angle Filing Specifications
.022".022".028".028".028".022".022".022".022".022".022".028".028".028".028".028".028".038".038"

Page 6

1.7 FILE-O-PLATE
Carlton saw chain will fit most brands of chain saws and a Carlton File-O-Plate will provide proper maintenance and increase the life of your saw chain. No other tool available will increase chain life and cutter efficiency like the Carlton File-O-Plate, which duplicates the factory cutting angles and the correct depth gauge setting to maintain the self-feeding cutting action of the saw chain.
1.8 CHAIN SHARPENING REFERENCE TABLE
Carlton File Specification FILE-O-PLATE File Diameter Inch mm Files 12 Pcs. Files 2 Pcs. Part Number File Holder File Set

65996 65996

5/32 5/32 11/64 11/64 11/64 3/16 3/16 3/16 3/16 5/32 5/32 7/32 7/32 7/32 7/32 7/32 7/32 7/32 7/32
4,0 4,0 4,5 4,5 4,5 4,8 4,8 4,8 4,8 4,0 4,0 5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5
105322CA 105322CA 101642CA 101642CA 101642CA 103162CA 103162CA 103162CA 103162CA 105322CA 105322CA 107322CA 107322CA 107322CA 107322CA 107322CA 107322CA 107322CA 107322CA
9532CA 9532CA 9164CA 9164CA 9164CA 9316CA 9316CA 9316CA 9316CA 9532CA 9532CA 9732CA 9732CA 9732CA 9732CA 9732CA 9732CA 9732CA 9732CA
8532CA 8532CA 8164CA 8164CA 8164CA 8316CA 8316CA 8316CA 8316CA 8532CA 8532CA 8732CA 8732CA 8732CA 8732CA 8732CA 8732CA 8732CA 8732CA

Page 7

GUIDE BARS
2.1 GUIDE BAR CLASSIFICATION MINI HOBBY CHAMP (MHC)
Mini type laminated construction sprocket tip bar for semi-professional and D.I.Y markets for 1/4 and 3/8 pitch low profile chains. Recommended for saw sizes 2.5 cu.in. (40cc) and smaller. Available in lengths 12 18.

MHC ~ Oregon SD / GD 3/8 Lo Pro - 7 Teeth.670 (17,0 mm) Radius

HOBBY CHAMP (HC)

The Hobby Champ guide bar is built with the same features as our Timber Champ. Recommended for saw sizes 2.5 cu.in. (40cc) 3.5 cu.in. (57cc). Available in lengths 12 20. HC ~ Oregon GP / SP 3/8 Lo Pro - 9 Teeth.866 (22,0 mm) Radius

NARROW KERF (NKC)

The Narrow Kerf guide bar requires less power from the chain saw and makes less waste. It incorporates the same quality features as Hobby Champ and Timber Champ. Recommended for saw sizes 2.5 cu.in. (40cc) 3.5 cu.in. (57cc). Available in lengths 15 18.
NKC ~ Oregon ML.325 - 10 Teeth.854 (21,7 mm) Radius

Page 8

TIMBER CHAMP (TC)
Logger proven laminate featuring induction hardened rails and stress relieved for integral strength. Competitively priced for a variety of applications. Recommended for saw sizes 3.8 cu.in. (61cc) and smaller. Available in lengths 15 - 20
TC ~ Oregon SL.325 - 11 Teeth 3/8 - 10 Teeth.994 (25,2 mm) Radius
PREMIUM MINI SPROCKET TIP (PM)
Professional quality solid steel sprocket nose bar for.325 and 3/8 pitch chains. Replaceable sprocket nose assembly. Ground and polished finish. Recommended for saw sizes 2.5 cu.in. (40cc) - 3.5 cu.in. (57cc) Available in lengths 16 - 20.
PM ~ Oregon RN.325 - 11 Teeth.984 (25,0 mm) Radius
PREMIUM SPROCKET TIP (PS)
Professional quality solid steel sprocket nose bar for.325, 3/8 and.404 pitch chains. Replaceable sprocket nose assembly. Ground and polished finish. Recommended for saw sizes 3.5 cu. in (57cc) and larger. Available in lengths 15 38.
PS ~ Oregon RN.325 - 12 Teeth 3/8 - 11 Teeth.404 - 10 teeth 1.122 (25.5 mm) Radius

Page 9

2.2 PART NUMBER SYSTEM

Example: 1618A260PS

16 Bar length in inches 18 Mount A Pitch 2 Gauge 60 No. of Drive Links PS Bar Type
3/8".404" 1/4".325" 3/8" LoPro
PH PS PM BC PC TC HC MHC NKC

45E 50E 52E 57E 45E 52E 57E 45E 52E 56E
N1C-BL-045E N1C-BL-050E N1C-BL-052E N1C-BL-057E N1C-BL-045E N1C-BL-052E N1C-BL-057E N1C-BL-045E N1C-BL-052E N1C-BL-056E
N1C-045E N1C-050E N1C-052E N1C-045E N1C-052E N1C-045E N1C-052E N1C-056E

2033 TH

2118 EL, 2115EL, 2035 2116, 2115 EL14, EL1200, 45E, 49SP 50 , 2014, 2015, 2016, 2012 51, 370, 380, 410, 420 435, 450, 451, 45 451EVS, 452, 490, 455 510, 520, 525, 535, 590 590, 2012, 2014, 2015 2016, 2036, 2040 2041, 2045, 2149, 2050 2051, 2054, 2055 2150, 2145, 2141, 2152, 2137
13-01W-K256-TC 15-01W-K2-TC12 / 1516K264PM 15-01W-K2-TC / 1516K264PM 16-01W-K2-TC12 18-01W-K2-TC12

2063, 2163, 2159, 2165

.325".325".325" 3/8 3/8 3/8.325.325.325.325.325.325.325.325.325.325".325".325" 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8.404.404.404.404
0.050 0.050 0.050 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.050 0.050 0.050 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.063 0.058 0.063 0.063 0.063
1,3 1,3 1,3 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,3 1,3 1,3 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,6 1,5 1,6 1,6 1,6
56E 64E 72E 50E 56E 60E 52E 56E 60E 64E 64E 66E 68E 72E 78E 56E 64E 72E 52E 56E 60E 64E 68E 72E 76E 84E 89E 92E 102E 115E 68E 68E 76E 104E
K1NK-BL-056E K1NK-BL-064E K1NK-BL-072E A2LM-BL-056E A2EP-056E A2LM-BL-060E A2EP-060E K2L-BL-056E K2L-BL-064E K2L-BL-064E K2L-BL-066E K2L-BL-072E K2C-056E K2C-064E K2C-064E K2C-066E K2C-072E K1NK-BL-056E K1NK-BL-064E K1NK-BL-072E A2LM-BL-056E A2LM-BL-060E A2LM-BL-064E A2LM-BL-068E A2LM-BL-072E A2LM-BL-084E A2EP-056E A2EP-060E A2EP-064E A2EP-068E A2EP-072E
15-01W-K1-NKC 18-01W-K1-NKC 15-01W-A2-TC11
625, 630, 630SUPER 670, 670CHAMP 2077, 2083, 2094, 2095 2095, 2065, 2071, 2171 2165, 2186 820/830* 920/930* (with 9 mm stud) 625, 630, 630SUPER 670, 670CHAMP 2077, 2083, 2094, 2095 2095, 2065, 2071, 2171 2165, 2186 820/830* 920/930* (with 9 mm stud)

Page 19

JONSERED 60, 62, 66, 70, 75 80, 90, 601, 621 751, 801, 820, 830 910E, 920, 28 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8LP 1/4 1/4 1/4 3/8LP 3/8LP 3/8LP 3/8LP 3/8LP 3/8LP 3/8LP 3/8LP.325".325".325".325".325".325".325.325.325.325.325.325.325.325.325.325 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

15-09W-K264-TC

Page 27
ZENOAH GT250-10, GT310-12, GT310-14 G300T/S, G310TS G320 AVS
3/8LP 3/8LP 3/8LP 3/8LP 3/8LP.325.325.325.325.325.325".325".325".325.325.325.325.325.325.325.325.325.325.325 3/8 3/8 3/8 3/8 3/8
0.050 0.050 0.050 0.050 0.050 0.058 0.058 0.058 0.058 0.058 0.050 0.050 0.050 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058 0.058
1,3 1,3 1,3 1,3 1,3 1,5 1,5 1,5 1,5 1,5 1,3 1,3 1,3 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5
40E 45E 52E 56E 58E 54E 56E 60E 64E 66E 56E 64E 72E 56E 60E 64E 64E 66E 72E 81E 78E 66E 72E 81E 52E 60E 64E 70E 72E
N1C-BL-040E N1C-BL-045E N1C-BL-052E N1C-BL-056E N1C-BL-058E K2L-BL-056E K2L-BL-064E K2L-BL-066E
G3800AVS-14, G3800AVS-G250TS, G3100, GG380AVS 40 G415AVS-G410AVS, G455AVS 33 G500AVS, G38, GG415AVS, G455AVS, G500AVS 50 50
K2C-056E K2C-064E K2C-066E K1NK-BL-056E K1NK-BL-064E K1NK-BL-072E K2C-056E K2C-064E K2C-064E K2C-066E K2C-072E 15-09W-K264-TC
13-01W-K256-TC 15-01W-K2-TC / 1516K264PM 15-01W-K2-TC12 / 1516K264PM 16-01W-K2-TC12 18-01W-K2-TC12

G561AVS

G621AVS
A2LM-BL-060E A2EP-060E A2LM-BL-064E A2EP-064E A2LM-BL-072E A2EP-072E

Page 28

REFERENCE LIST
2.4 GUIDE BAR CROSS REFERENCE LIST

Oregon Carlton guide bar

120SDEA041 120SDEA074 120SPEA041 124MLEA074 133SLBD025 138SLBK095 140SDEA041 140SDEA074 140SPEA041 140SPEA074 150MPBK095 153SLGD025 153SLHD025 158RNBK095 158SLBK041 158SLBK095 158SLGK095 158SLHD009 158SLHK095 158SLHK153 160SDEA041 160SPEA041 163ATMD025 163SLGD025 163SLHD025 168SLGK095 168SLHD009 168SLHD024 183RNDD025 183SLHD025 188SLGK095 188SLHD009 188SLHK095 188SLHK153 203SLHD025 208SLHD009
12-10-N1-MHC 12-26-N1-MHC 12-10-N145-HC 12-26-N4-MHC 13-42-K356-TC 13-01W-K256-TC 14-10-N1-MHC 14-26-N1-MHC 14-10-N152-HC 14-26-N1-HC 15-01W-K1-NKC 15-42-K363-TC12 # 15-42-A356-TC11 1516K264PM 15-09W-K264-TC 15-01W-K2-TC 15-01W-K2-TC12 15-81-A256-TC11 15-01W-A2-TC11 15-01W-A2-TC11 16-10-N1-MHC 16-10-N156-HC 1631063PH 16-42-K367-TC12 16-42-A360-TC11 16-01W-K2-TC12 16-81-A260-TC11 16-71-A260-TC11 1831A366PS 18-42-A366-TC11 18-01W-K2-TC12 18-81-A268-TC11 18-01W-A264-TC11 18-01W-A264-TC11 20-42-A372-TC11 20-81-A272-TC11
# Attention; on the Carlton guide bar use drive link 63 instead of 64. (As with Oregon guide bars.)

Page 29

SPROCKETS
3.1 SPROCKET CLASSIFICATION
CARLTON TECHNICAL TIP: Worn sprocket rims are more difficult to detect than worn spur sprockets. Carlton strongly recommends that a new sprocket is fitted with every new saw chain, this will eliminate many complaints about chain stretch and will prolong the life of your saw chain.

SPUR SPROCKETS Carlton spur sprockets feature a unique cold punch process. During assembly, a series of splines in the bottom of the spur lock into the face of the drum to form a strong mechanical bond. As a result, our spur and drum hardness is more consistent.
POWER DRIVE SPLINE/RIM ASSEMBLIES Carlton power drive spline and rim assemblies are manufactured from wear resistant alloy steel for durability. They allow the user to change the rim when they are worn without having to replace the entire clutch drum.
RIM SPROCKETS Carlton replacement rim sprockets are preferred by professional loggers for their self-alignment, long wear life and great serviceability. Worn rim sprockets are more difficult to detect than worn spur sprockets. Carlton Company strongly recommends a new sprocket with every new saw chain. Rim sprockets are sold in packages of 10.
3.2 RIM SPROCKET REFERENCE CHART
Pitch Tooth Spline Size Carlton Oregon GB
.325".325".325" 3/8" 3/8" 3/8" 3/8".404".404"
mini 7 small 7 small 7 mini 7 small 7 standard standard standard standard
SRK37 SRK27 SRK28 SRA37 SRA27 SRA17 SRA18 SRB17 SRB18
GBJ7M7 GBJ7S7 GBJ8S7 GBA7M7 GBA7S7 GBA7L7 GBA8L7 GBB7L7 GBB8L7

Page 30

RIM SPROCKETS

3.3 RIM SPROCKET TYPES

SMALL 7

MINI 7

Page 31
SPROCKET CLASSIFICATION TABLE
3.4 SPROCKET CLASSIFICATION TABLE
PITCH () ALPINA CASTOR 330 380, CX40, EURO P34, 360, 370, 390 400, 450, 500 A40E, PROF41, PROF45 DOLMAR 290E 115 PS34 PS400, 401, 33, 340, 341, 342, 344 115I 115I, 115IH PS60001, PS68001 PS9000, PS9010 122, 122SL, 123, 133, 143, CA 3/8 3/8.325 3/8 3/8 3/8.325 3/8 3/8 3/8 3/8 3/8.404 112, 113, 114, 116, 117, 119, 120, 116SI, 120SI 152, 153, 166 ECHO CS280, CS290, CS300, CS2800, CS2900 CS301, CS302, CS315, CS330, CS351, CS360 CS1001, CS-900 CS400, CS440, CS3600, CS3900, CS4510, CS4600 CS4000, CS4500, CS4600, CS5000, CS5500 CS3000, CS3350, CS3400, CSA3450 CS605, CS60, CS60S CS602VL, CS702VL, CS750VL CS650, CS660 CS510, CS550, CS610, CS451VL, CS452VL, CS500VL CS280, CS290, CS300 CS301, CS302, CS315, CS330, CS351, CS360 EFCO 131 EINHELL MKS30, MKS40AV, MKS41 HOMELITE 3300, 3350, 3800, 3850 190, SUPER 2, VI SUPER 2, XL, XL MINI, XL2, BANDIT LX30, SABRE 31, 33, 200 15A0, 350, 350HG, 350SL, EZ, EZ250AO, EZ AUTO, SEZAO, SXL MINI AO, V1123 XLMINI AO, XL101, XL72 NO BRAKE 450, 550, SUPER XL925(6S CLUTCH), SXL AUTO, VI944, VI955, XLAUTO, XL(800-924), XL12 (AFTER 1735838) 330, 350 with 3' CLUTCH, 350HG with 3' CLUTCH, 350SL with 3' CLUTCH, 360, 410 VI123, VI125, XL(76, 100 SERIES) 450, 550, SUPERXL925, VI944 VI955, XLAUTO, XL(800-924), XL12(after 1735838) 150AO, 350HG, EZ, EZ250AO, EZAUTO, SEZAO, SXLMINIAO VI123, XLMINIAO, XL101, XL76NOBRAKE C52, XL(400-700), XL12 (before 1735838) 330, 350 (WITH 3" CLUTCH), 350HG (WITH 3" CLUTCH) 350SLWITH30"CLUTCH, 360, 410, VI123, VI125, XL(76-100SERIES) (pagine einde) 3/8 3/8 3/8.325 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8.404.325 3/8.325 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8.404 3/8 3/8 3/8.325.325

SPLINE

POWER DRIVE
SmallSmall7 Small7 Small7 Small7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 StdStd7 Small7 Small7 Small7 Std7 Std7 Std7 Std7 Small7 Small7 SmallSmall7 Small7 Std7 Std7 Std7 Std7 SRK27 SRA27 SRA17 SRA17 SRA17 SRA17 N6-FR181-SS SRA17 SRA17 SRA27 SRA27 SRA27 A7-EC802-SS A7-EC802-SS SRA17 SRB17 SRK27 SRA27 SRK27 K7-EC602-SS SRA17 SRB17 N6-EC102-SS N6-EC402-SS SRK27 SRA27 SRA17 SRA17 SRA17 SRA18 SRK28 SRA27 SRK27 N6-FR181-SS N6-PO925-SS

Page 32

PITCH () HOMELITE 1050AUTO, 2000AUTO, 2000E, 2100AUTO, 650,750, 9-23, 900D, 909D, 990D 995D, BUZ-500, SUPER1050AUTO, SUPER2100AUTO, XP1020SUPER, XP2000 HUSQVARNA 340, 345, 350 340, 345, 346, 350, 351 355, 357, 359 34, 35, 37, 38 36, 41, 136, 141 40, W/PUMP DRIVER (after S/N 345-0001) 257 (after S/N 314-0001) 262 (after S/N 345-0001 36, 41 140, 240, 340, 40P 44, 444 , 42, 133, 234, 238, 242 154, 254, 262, 50, 51, 55.325.325 3/8 3/8 3/8.325.325 3/8 3/8.325.325.325.325.325.325.325 3/8 42, 242 (after S/N 3441001), 246 40, 45 160, 163, 260, 263, 280, 288 480, 65, 77 162, 268, 272, 288 RANCHER 61 (after S/N 0510572), 266 (after 051XXX) 268 (after 051XXX), 272 (after 051XXX) 61, 266, 268, 272, (before 051XXX), 162, 66 371, 365, 362, 1100, 181, 185, 2100, 2101XP 281, 285, 394, 395 , JUNGLE2100, 2101XP SAWMILL JONSERED 36, 361, 365, 370 2036, 2040, 2041 2045, 2050, 2151, 2159 2065, 2071 20, 362, 041 490, 590 3/8 3/8.325.325.325.325 3/8 3/8 3/8.325.325.325 3/8 410, 420, 425, 435 2051, 450, 455, 510, 520, 000, 000 2051, 2054, 2055 (use bearing 37504 FOR 2051, 2054, 2055) 2045, 2050, 2063 45, 451, 49SP 50, 51, 521 , 52E.325.325.325.325 3/8.325.325 3/8.325.325 3/8 3/8.404 3/8 3/8 3/8 3/8 3/8 3/8 3/8.404 3/8.404 3/8.404.325.404
7 Small7 Std7 Std7 Small7 Small7 Small7 Small7 Small7 Small7 Small7 Small7 Std7 Small7 Small7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 StdSmall7 Std7 Std7 Std7 Small7 Small7 Small7 Std7 Small7 Small7 Small7 Small7 Small7 Small7 Small7 Small7 SRK27 SRA17 SRA17 SRA17 SRK27 SRK27 SRK28 SRA17 SRK27 SRK28 SRK27 SRK28 SRA27 SRK27 SRK28 SRA27 K7-HU114-SS K7-HU114-SS PM-574-K27 PM-504-K27 K7-HU704-SS N6-FR181-SS SRB17 SRA17 SRA17 SRA17 SRA17 SRB17 SRA17 SRB17 PM-004-A18 SRB17 SRA17 SRA17 SRA27 SRK27 SRK28 SRK27 SRK27 SRK27 SRK27 SRK28 SRA17 SRK27 SRK27 SRA17 PM-214-K27 K7-HU114-SS K7-HU114-SS PM-574-K27 K7-HU704-SS SRK27 SRA17 N6-FR181-SS PM-504-K27

Page 33

PITCH () JONSERED (after S/N 0510123), 2065, (after 0510000) 670 (after S/N 050153) 625 (before S/N 0510123) 630 (before S/N 0510000) 670 (before S/N 0510153) 2094 2077, 2083 820, 910, 920, 930 SAWMILL, 2095 MAKITA DCS34 DCS400, 401, 33, 340, 341, 342, 344 DCS 430, DCS 2501, DCS4300 DCS 5200I DCS 6000I, DCS6800I DCS9000, DCS9010 MCCULLOCH MAC (110, 130, 140), MINIMAC (25, 30), 365, PM480, Minimac, Titan35, 40 POWER MAC (310, 320, 330, 340, 364, 384, 394, 484, 494, 510), 3200 TITAN 35/40, TITAN 7, 500 DOUBLEEAGLE50, TITAN50, 57, 70 Pro Mac 54, 61, 71, 36, 40, 46 ProMac 72 Mac 950 1-10SERIES, CP55, CP70, PM10-10, PM570- PM60, PM610, PM650, PM700 PM850, SP55, SP60, SP61, SP70, PM155, PM165, 355, 375, 515 OLEO-MAC-OLYMPIK 946, 938, 941, 942, 945, 951 947, 350 (PRIOR 1988), 252, 254 260, 260A, 260AS, 260S, 261, 280, 280A, 460, 460AS, 480, 480AS, 481, 482 956, 962 970, 980 970, 980 PARTNER 351 1612, 1613, 1614, 1616, 330, 350, MINI P3, P2 365, 405 365, 400, 500, P48, P49V, P5000, 540, 545 3/8" 3/8 3/8.325.325 3/8.325.325 3/8 P100AFTERMAY1977, P85AFTERMAY1977 7000, F55, F65, R-16, R-17 R-171, R-18, R-19, R-20, R201, R-21, R-21T, R-22, R-420, S50, S55 P7700 PIONEER P12 1072, 1073, 1074, 2071, 7073, 970, HOLIDAYII, P20, P21, P25, P26, P28 FARMSAW (1160, 1200, 1420, 2270, 2400, 3071, 3200) P38, P41, P42, P51, P60, P61, P62 3/8.325 3/8 3/8 3/8.404 3/8 3/8 3/8.325.325 3/8 3/8 3/8.325 3/8 3/8.404.325 3/8 3/8 3/8 3/8.404 3/8 3/8 3/8.325 3/8 3/8 3/8 3/8 3/8 3/8.325 3/8.404 3/8 3/8 3/8 3/8
Std7 Std7 Std7 Std7 Std7 Std7

SRA17 SRB17 SRA17

PM-004-A18

Std7 Std7 Std7 Std7

SRA17 SRA17 SRA18

Small7 Small7 Std7 Std7

SRK28 SRA27 SRA17 SRA17 N6-MC644-SS
Small7 Std7 Std7 Std7 Std7 Std7
SRK28 SRA17 SRA17 SRA17 SRA17 SRB17
Small7 Small7 Std7 Std7 Std7 Small7 Std7 Std7 Std7
SRK27 SRK27 SRA17 SRA17 SRA18 SRK27 SRA17 SRA17 SRB17 N6-PO235-SS N6-FR181-SS A7-ST903-SS
Small7 Small7 Small7 Small7 Std7 Std7 Std7 Std7 Std7
SRK27 SRA27 SRK27 SRK28 SRA17 SRA17 SRA17 SRB17 SRA17

PM-574-K27

K7-HU114-SS

N6-FR181-SS SRK28 SRA17

Small7 Std7

Page 34

PITCH () POULAN 3300, 3350, 285, 2700, 3500, 3700 1800, 2000, 2300, 235, MICROSERIES, S25 230, 260, 2050, 2075, 2150, 2175, 2250, 2450, 2550 255, 295, 2500, 2600, P600, 210, P600, 2750, 2900, 3050 2800, 285, 3000, 305 200, 245, 306, 306AUTO, 345AUTO, 4200, 4400, 4900, 5200, 405, 455, 525, 655 3400, 375, 3700, 3800, 5500, 6 REMINGTON 5005, MIGHTY-MITE 100 FROMLATE1969MODELS, PL-4, PL-5, PL-5A RYOBI CSE3840B SKIL 1600U, 1601H, 1602H, 1601U, 1612U, 1712U, 1603H, 1604H 1620U, 1634U 1636U SOLO 639, 644, 651, 651SP STIHL 010, 011, 012, 009, 020T, MS200T 017, 018, 019, 021, 023, 025, MS190 017, 018, 019, 021, 023, 025, MS024, 026 AFTER SN X 9074 024, 026 (BEFORE SN X9074) 038 045, 045AVELECTRONIC, 056 (before S/N 10963560) 048 041, 041AV, 041AVELECTRONIC, BEFORE5664891 030AV, 031AV, 031AVELECTRONIC, 032, 041, 041AV 041 AVElectronic, AFTER5664891 064, 066 044, 046 050AV, 051AVELECTRONIC 075ELECTRONIC, 076 034.036, 039, MS390 029, MS290 029, MS290 070, 070AV, CONTRA, SUPERCONTRA 08, 08S, S-10 TAS TANAKA 400, 4501 ZENOAH G300, G310, G320, G280 620, 621, G3/8.325 3/8.325 3/8.404 3/8 3/8.404 3/8.325 3/8.404.404 3/8 3/8.325.325.325 3/8.325.325 3/8 3/8 3/8 3/8 3/8.325 3/8 3/8 3/8 3/8 3/8 3/8.325 3/8 3/8 3/8.325.325 3/8.325.325 3/8 3/8 3/8.404

7 Small7 Std7 Small7 Small7 Std7 Std7 Std7 StdStd7 Std7 Small7 Small7 Small7 Small7 Small7 Std7 Std7 Std7 Std7 Std7 Std7 Std7 Small7 Std7 Std6 Small7 Small7 SRK27 SRA27 A7-EC802-SS SRB17 SRB17 A7-ST613-SS SRA17 SRA17 SRA17 SRB17 SRA17 SRA18 SRB17 SRA27 PM-613-A37 A7-ST613-SS A7-ST903-SS SRK27 SRK27 SRA27 SRK27 SRK27 K7-ST803-SS A7-ST113-SS N6-FR181-SS N6-PO925-SS N6-PO035-SS K7-SO663-SS N6-ST303-SS SRA17 SRB17 SRK27 SRA17 SRK27 SRK28 SRA17 SRA17 SRA17 SRB17 K7-HU114-SS N6-PO925-SS N6-PO035-SS N6-PO235-SS

Page 35

ACCESSORIES
4.1 CHAIN AND GUIDE BAR ACCESSORIES GREASE GUNS GROOVE CLEANER
The Carlton professional and D.I.Y hand-held grease guns are an easy to use, and an economical way to lubricate the chain saw guide bar.
The groove cleaner cleans the bar grooves and oil holes. This also allows correct placement of the depth gauge.

Description

Part number

GREASE GUNS

GROOVE CLEANER

78020-CA

PROTECTIVE SCABBARDS
Protects your bar and chain from damage.
PROTECTIVE SCABBARDS 25 - 35cm PROTECTIVE SCABBARDS 40 - 50cm

78030 78031

FILE-O-PLATE CHAIN SHARPENING AID
Theres a Carlton saw chain to fit most brands of chain saws, and a Carlton File-OPlate to provide proper maintenance and increased life for your Carlton saw chain. No other tool available will increase chain life and cutter efficiency like the Carlton File-O-Plate. The File-O-Plate duplicates the factory cutting angles and the correct depth gauge setting to maintain the self-feeding cutting action of the saw chain. 1. In one position, the Carlton File-O-Plate precisely duplicates the cutting angles originally ground into the chain at the factory. 2. In the other position, the Carlton FileO-Plate lowers the depth gauges to maintain self feeding cutting action.

Chain Type

File Diameter
K1C, K2C, K3C, K1NK K1C-BL, K2C-BL, K3C-BL, K1NK-BL K1L, K2L, K3L K1L-BL, K2L-BL, K3L-BL A1EP A2EP A3EP , , A1EP-BL, A2EP-BL, A3EP-BL A1LM, A2LM, A3LM A1LM-BL, A2LM-BL, A3LM-BL N1C, N1C-BL N4C, NC4BL B2LM, B3LM
.325".325".325".325" 3/8" 3/8" 3/8" 3/8" 3/8" LP 3/8" LP.404"
4,8mm - 3/16" 4,8mm - 3/16" 4,5mm - 11/64" 4,5mm - 11/64" 5,5mm - 7/32" 5,5mm - 7/32" 5,5mm - 7/32" 5,5mm - 7/32" 4mm - 5/32" 4mm - 5/32" 5,5mm - 7/32"

Page 36

RIVET SPINNER ASSEMBLY BENCH CHAIN BREAKER
Tough enough for 3/4 pitch chain, and built to fit all pitches. The Carlton rivet spinner has an adapter to attach to an electric drill for high speed rivet spinning. Welded steel construction.

The Carlton bench breaker has a specially designed cam for more punching leverage and a unique anvil for driving bar nose rivets. Made with welded steel construction.
Complete Rivet Spinner Assembly Bearing And Washer Spinner Anvil 3/4 pitch Anvil 3/4 pitch Spinner Anvil 3/8 and.404 pitch Anvil 3/8 and.404 pitch Spinner anvil.325 and 3/8 LoPro Anvil.325 and 3/8 LoPro
75320 75320-10 75320-11 75320-12 75320-13 75320-14 75320-15 75320-16
Bench Breaker Assembly Punch 1/4 to 1/2 pitch Punch 3/4 pitch Anvil Guide Bar Anvil 1/4 to 1/2 pitch Anvil 3/4 pitch Key
75310 75310-1 75310-2 75310-3 75310-7 75310-11 75310-12

STUMP VISE

PREMIUM DOUBLE CUT SAW CHAIN FILES
These files are double cut for minimum clogging. Made of premium steel for longer life.
Tough forged steel construction. Portable vise makes saw maintenance a breeze. Built to last.

Part number 2 pcs.

Part number 10 pcs.

Part number 12 pcs.

Stump Vice

SHARPENING SET

The sharpening set contains contains the following parts: rat tail file, flat file, file holder, file handle round and flat file and File-O-Plate.
Round File 3,6 mm - 9/64" Round File 4 mm - 5/32" Round File 4,5 mm - 11/64" Round File 4,8 mm - 3/16" Round File 5,1 mm - 13/64" Round File 5,5 mm - 7/32" Round File 8 mm - 5/16" Rat Tail File 150 mm - 6" File Handle File Handle (For Rat Tail File)
109642CA 105322CA 101642CA 103162CA 103642CA 107322CA

9300410 9300010

FILE HOLDER

Description Part number

Sharpening Sharpening Sharpening Sharpening

Set Set Set Set

4,0 4,5 4,8 5,5

mm mm mm mm

5/32" 11/64" 3/16" 7/32"
8532CA 8164CA 8316CA 8732CA
The personal file sharpening set contains the following parts: file holder, rat tail file and file handle.
Fileholder Fileholder Fileholder Fileholder
9532CA 9164CA 9316CA 9732CA