Features:

Patented FIXTEC-System for a tool change in seconds
Over a 100 years of electric tools
AEG has excelled as an inventor, engineer and pioneer for new technologies. From the beginning until now: from the very first portable electric drill in 1898 to a long history of patents like the FIXTEC-System featuring fast and easy change of accessories and application
Metal Chuck for enhanced durability
Planetary gear Patented planetary gear for maximum power
Diamond Drill high performance dry diamond drill
2-speed gear For optimum power according to application. 1st speed: big holes (wood, concrete), high torque. 2nd speed: small holes (metal, wood), high speed.
2-Way-Battery Insertion for improved balance and flexibility
Patented Anti-VibrationSystem significantly reduced vibrations ( 50 %)
QUICKSTOP motorbrake for safety and time-saving
Softgrip ergonomic handle design with rubber padding for less tring use
Spindle Lock with safety mechanism protecting the gear mechanism
Metal gearbox For maximum stability and durability. Fully insulated for electrical safety
Extra Flat Gearhead for work in hard-to-reach places
Electronic with variable speed preselection, softstart, constant speed, overload protection
3-Position Handle for optimised usage
Safety Clutch to protect user and machine if a drill bit should jam
Keyless Safety Guard safety guards can be adjusted without any tool
Hammer Action Stop for drilling only in wood or steel
Adjustable Handle exclusive 8 position handle for wall chaser
Soft Hammer Mode reduces blow energy Deadman Switch switch turns off if user doesnt press Roto-Stop/Variolock multi-position chisel function Pendulum Action four stage adjustment for increased cutting performance
Forward/Revers action optimised in both directions
Integrated Metal Block for highest durability and stability
German Technology assured Quality and Innovation
AEGs success is driven by three core competencies: century-old superiority in electric motor technology, quality and innovative German engineering performance, as well as development of specific solutions for professional users and their requirements.
Competence in Electric Performance
The AEG range represents first-class product quality and performance combined with excellent motor technology, directly addressing the target group.
For Professionals and their Needs
Tools engineered to fulfil the requirements in daily work and business. System solutions and problem solving innovations help to get the professional job done precisely as expected.
Dust Extraction integrated dust extraction for clean working environment
Removable Main Handle to get better access to constraint places
Velcro simple sandpaper attachment without clamps
Direct Bit Reception into the spindle offers pin-point accuracy and easier handling

4 m Cable for professional use

Combi Hammers

e.g. PN 3000 Super X2
AEG develops rotary and demolition hammers for the professional user. The tools are powerful and durable with ease of use. The range offers from compact 20 mm fixing to 50 mm combi and demolition hammers with powerful 27 Joules the perfect tool for each application. Ergonomic design and innovative, patented solutions such as FIXTEC, planetary gear and AVS guarantee best results.
FIXTEC System AEG patented and unique system for changing easy and quick the tool reception for switching very fast from hammer drilling to drilling applications. Planetary gear AEG patented und unique mechanism for optimum maximum power for each application.
In comparison AEG hammers achieve better results than their competitors (in hammerdrilling and chiselling).

mm 10 mm 12 mm mm

AEG PN 3000 Super X2 competitor 1
Drilling capacity in concrete competitor 2 competitor 3
FIXTEC The patented FIXTEC system allows the change from one application to another within seconds and without loss of performance.
Electronic Electronics with no load speed reduction and overload protection for enhanced durability, variable speed and preselection of speed and hammer rate for optimum adjustment according to application. Constant speed switch.
2-speed planetary gear Patented planetary gear for maximum power in compact design. 2-speed for optimum power according to application: 1st speed: bigger holes (wood, concrete), high torque 2nd speed: small holes (metal, wood) high speed.
Metal gearbox For maximum stability and durability. Fully insulated for electrical safety.
AVS (= Anti-VibrationsSystem) The patented AVS significantly reduces vibrations for more comfortable operation.
Safety clutch Effective protection of user and tool if a drill bit should jam.
Roto-Stop For occasional light chiselling. With Variolock the chisel can be fixed in 36 different positions.
Hammer action stop For drilling only in materials such as wood and steel.
Reversible action Forward and reverse action mechanism for screwing in/out and to unscrew jammed drills.
Softgrip Ergonomically designed rear handle with air-padded soft rubber. For optimal grip and reduced vibrations.
4 m power cable Long professional cable for freedom of power supply.

BH 22 XE

Rotary Hammers

BH 22 E

Powerful 650 watt motor 22 mm drilling capacity in concrete SDS-plus pull back chuck for quick and easy changing of accessories Modern ergonomic design for more comfortable operation Safety clutch for protection of the machine and operator if a drill bit should jam Hammer mechanism designed to give long life and lower vibration Electronics with variable speed switch and speed preselection Hammer stop function for drilling in wood or metal Reversible action for easy removal of screws

Standard equipment VarioBox, front handle, depth gauge, 4 m cable
Powerful 670 watt motor Patented FIXTEC system for a tool change in seconds 22 mm drilling capacity in concrete Modern ergonomic design for more comfortable operation Safety clutch for protection of the machine and operator if a drill bit should jam Hammer mechanism designed to give long life and lower vibration Electronics with variable speed switch and speed preselection Hammer stop function for drilling in wood or metal Reversible action for easy removal of screws
Standard equipment VarioBox, front handle, depth gauge, adaptor and key chuck, 4 m cable

BH 24 XE

Powerful 680 watt motor Patented FIXTEC system for a tool change in seconds 24 mm drilling capacity in concrete Modern ergonomic design for more comfortable operation Safety clutch for protection of the machine and operator if a drill bit should jam Hammer mechanism designed to give long life and lower vibration Electronics with variable speed switch and speed preselection Hammer stop function for drilling in wood or metal Reversible action for easy removal of screws

Rotary Hammer

Technical data
Power input Power output No load speed Blow energy Hammer rate (full load) Drilling capacity in concrete / steel / wood Tool reception Weight Article number EAN code
650 watt 325 watt rpm 2.7 J bpm 22 / 13 / 30 mm SDS-plus 2.4 kg 12279 0
670 watt 335 watt rpm 2.9 J bpm 22 / 13 / 30 mm FIXTEC / SDS-plus 2.6 kg 12281 3
680 watt 340 watt rpm 2.9 J bpm 24 / 13 / 30 mm FIXTEC / SDS-plus 2,6 kg 12280 6

PN 3000 XN2

PN 3000 R2
Four tools in one: for hammer drilling, drilling, chiselling and screwdriving 24 mm drilling capacity in concrete 600 watt power for multiple purpose use Electronics: variable speed switch and variable preselection of speed and hammer rate via integrated wheel switch Two-speed planetary gearbox for high torque in 1st gear and high speed in 2nd Fully insulated metal gearbox for maximum stability Safety clutch for protection of the machine and operator if a drill bit should jam Roto-Stop and Variolock for occassional chiselling Reversible action for easy removal of screws Hammer action stop for drilling in materials such as wood and steel

FIXTEC, for easy tool system change Four tools in one: for hammer drilling, drilling, chiselling and screwdriving 24 mm drilling capacity in concrete 600 watt power for multiple purpose use Electronics: variable speed switch and variable preselection of speed and hammer rate via integrated wheel switch Two-speed planetary gearbox for high torque in 1st gear and high speed in 2nd Fully insulated metal gearbox for max. stability Safety clutch for protection of the machine and operator if a drill bit should jam Roto-Stop and Variolock for occassional chiselling Reversible action for easy removal of screws Hammer action stop for drilling in materials such as wood and steel

PN 3000 X2

FIXTEC, for easy tool system change 26 mm drilling capacity in concrete 800 watt power for the most demanding hammer applications AVS Anti-Vibration-System significantly reduces vibration for more comfortable operation Electronics: variable speed switch and variable preselection of speed and hammer rate via integrated wheel switch Two-speed planetary gearbox for high torque in 1st gear and high speed in 2nd Fully insulated metal gearbox for max. stability Safety clutch for protection of the machine and operator if a drill bit should jam Roto-Stop and Variolock for occassional chiselling

PN 3000 Super X2

FIXTEC, for easy tool system change 30 mm drilling capacity in concrete 1010 watt power for the most demanding hammer applications AVS Anti-Vibration-System significantly reduces vibration for more comfortable operation Electronics with accelerator switch and variable speed preselection, softstart, constant speed and overload protection Two-speed planetary gearbox for high torque in 1st gear and high speed in 2nd Fully insulated metal gearbox for max. stability Safety clutch for protection of the machine and operator if a drill bit should jam Roto-Stop and Variolock for occassional chiselling
Standard equipment VarioBox, front handle, depth gauge, adaptor and keyless chuck, 4 m cable
Power input Power output No load speed 1st / 2nd gear Blow energy Hammer rate (full load) Drilling capacity in concrete / steel / wood Thin walled core bit Tool reception Weight Article number EAN code
600 watt 300 watt / rpm 2.7 J bpm 24 / 16 / 30 mm 68 mm SDS-plus 2,7 kg 11879 3

600 watt 300 watt / rpm 2.7 J bpm 24 / 16 / 30 mm 68 mm FIXTEC / SDS-plus 3.2 kg 11627 0
800 watt 400 watt / rpm 3.0 J bpm 26 / 18 / 40 mm 82 mm FIXTEC / SDS-plus 3.3 kg 10866 4
1010 watt 505 watt / rpm 3.1 J 4000 bpm 30 / 20 / 66 mm 82 mm FIXTEC / SDS-plus 3.4 kg 11452 8

BH 26 LE

Soft hammer mode reduces blow energy and speed for drilling/chiselling in sensitive materials AVS Anti-Vibration-System Metal gearbox for optimum seating of the gears and longer life Block construction for exact seating of bearings and maximum robustness Roto-Stop for light chiselling Safety clutch protects both the operator and the machine if the tool should block Hammer action stop Softgrip on rear handle for more comfortable operation Electronics with accelerator switch Long 4 m power cable for freedom of power supply

BH 26 LXE

FIXTEC for quick and easy changing of accessories or tool system adaptors without loss of power or efficiency Soft hammer mode AVS Anti-Vibration-System Metal gearbox for optimum seating of the gears and longer life Block construction for exact seating of bearings and maximum robustness Roto-Stop for light chiselling Safety clutch protects both the operator and the machine if the tool should block Hammer action stop Softgrip on rear handle for more comfortable operation Electronics with accelerator switch Long 4 m power cable
Standard equipment VarioBox, front handle, depth gauge, keyless chuck (1.mm), FIXTEC adaptor, 4 m cable
Power input Power output No load speed Blow energy Hammer rate (full load) Drilling capacity in concrete / steel / wood Drilling capacity core cutter Tool reception Weight Article number EAN code
750 watt 375 watt rpm 3,2 J bpm 26 / 13 / 30 mm 68 mm SDS-plus 2,9 kg 12255 4
750 watt 375 watt rpm 3,2 J bpm 26 / 13 / 30 mm 68 mm FIXTEC / SDS-plus 3,1 kg 12256 1

PN 3500 X

Chipping Hammer
The lightweight chipper with high performance! Powerful 4.1 Joules for fast penetration Variolock (35 positions) for selecting the most appropriate chisel angle Lock-on switch function AVS Anti-Vibration-System significantly reduces vibration for more comfortable operation Fully insulated metal gear box Softgrip for more comfortable handling
Standard equipment VarioBox, front handle, flat chisel, 4 m cable

PN 3500

AVS Anti-Vibration-System significantly reduces vibration for more comfortable operation Electronics with accelerator switch Fully insulated metal gearbox for maximum stability Hammer action stop, for drilling in wood and steel Roto-Stop and Variolock for chiselling Service hatches for easy change of carbon brushes Safety clutch protects machine and operator if a drill bit should jam Softgrip for more comfortable handling
FIXTEC for easy tool system change AVS Anti-Vibration-System significantly reduces vibration for more comfortable operation Electronics with accelerator switch Fully insulated metal gearbox for maximum stability Hammer action stop, for drilling in wood and steel Roto-Stop and Variolock for chiselling Service hatches for easy change of carbon brushes Safety clutch protects machine and operator if a drill bit should jam Softgrip for more comfortable handling

720 watt 360 watt 4,1 J 3650 bpm / / mm SDS-plus 3.7 kg 11853 3
750 watt 375 watt rpm 3.4 J bpm 30 / 16 / 40 mm 82 mm SDS-plus 3,8 kg 11181 7
750 watt 375 watt rpm 3.4 J bpm 30 / 16 / 40 mm 82 mm FIXTEC / SDS-plus 3.9 kg 11637 9
Large Demolition and Rotary Hammers

PN 4000 E

Massive 10.5 Joules in every blow Effficient 1005 watt motor and Electronic Feedback Control Circuitry (EFCC) for consistently high performance Roto-Stop and Variolock, giving maximum control when undertaking chiseling work Metal gearbox for long service life SDS-Max tool reception Service indicator light Automatic cut-out carbon brushes AVS (Anti-Vibration-System) on all handles Softgrip on all handles Power supply light Safety clutch provides effective protection for both man and machine, should the tool snag into the workpiece Speed and torque preselection switch
Standard equipment Carry case, front handle, depth gauge, 4 m cable

PM 10 E

Demolition hammer Full-wave digital electronics Variable speed electronic Softstart No-load speed limitation Lock-on switch Speed preselection switch (A G) Service indicator light Automatic cut-out carbon brushes AVS (Anti-Vibration-System) on all handles (rear, additional front spade and straight handle) Softgrip on all handles SDS-Max tool reception

PN 11 E

Combination hammer Full-wave digital electronics Variable speed electronic Softstart No-load speed limitation Lock-on switch Speed preselection switch (A G) Service indicator light Automatic cut-out carbon brushes AVS (Anti-Vibration-System) on all handles (rear, additional front spade and straight handle) Softgrip on all handles SDS-Max tool reception Safety clutch protects both the operator and the machine if the tool should block
Standard equipment Metal case, D-front handle, additional straight handle, 6 m cable
Power input Power output No load speed Blow energy Hammer rate (full load) Drilling capacity in concrete / core bit / tunnel drill bit Tool reception Weight Article number EAN code
1005 watt 510 watt rpm 10.5 J bpm 40 / 105 / 68 mm SDS-Max 5.9 kg 11652 2
1600 watt 800 watt J bpm // SDS-Max 11.0 kg 11876 2
1700 watt 850 watt rpm J bpm 50 / 150 / 80 mm SDS-Max 11.8 kg 1185 88

Percussion Drills

e.g. ErgoMax
Removable handle Access to constraint places no problem with the shortest tool in class. Even shorter with easily removable rear main handle. AEG percussion drills are with powerful motors and high torques the ideal tools for professional claims. Features as metal chuck, integrated metal block and synchromesh forward and reverse mechanism guarantee enhanced reliability and durability.
FIXTEC The patented FIXTEC system for single-handed quick drill bit changing.
Planetary gear Patented innovative solution for maximum power from compact design up to 62 Nm.

New ergonomic front handle Metal clamp for improved grip on housing Easy by pressing one knob to set depth gauge improved fixation Single handed operation Better grip for the user through improved grip diametre

80% -20%

FIXTEC The patented FIXTEC system allows the keyless change of drill bits within speed.
Electronic Variable speed and hammer rate for perfect adjustment according to application.
Planetary gear Patented planetary gear for maximum power.
IMB (Integrated Metal Block) For highest durability and stability.
Hammer action For drilling only in materials such as wood and steel.
Reversible action Forward and reverse mechanism for screwing in/out and to unscrew jammed drill bits. Optimised in both directions for longer lifetime of carbon brushes.
Removable handle Easily and fast removable rear main handle to get better access to constraint places.

SBE 500 R

Ergonomic design for safe and comfortable handling Electronics with variable speed preselection Hammer action stop for rotary drilling Reverse action mechanism Metal keyless chuck mm
Standard equipment Carton

SBE 630 R

Powerful 630 watt motor Electronics with variable speed preselection Excellent handling due to compact ergonomic design Reverse action mechanism Hammer action stop for rotary drilling Metal keyless chuck 1.mm
Standard equipment VarioBox, front handle, depth gauge

SBE 635 RX

Powerful 630 watt motor Patented FIXTEC: quick tool changing system Single sleeve keyless chuck 1.mm Softgrip for less fatigue Electronics with variable speed preselection Hammer action stop for rotary drilling Excellent handling due to compact ergonomic design Reverse action mechanism Easy access to carbon brushes by taking off the Softgrip

SuperTorque

Powerful 630 watt motor for tough applications Planetary gearbox for low speed and high torque (59 Nm / stall torque) Ergonomic design for safe and comfortable handling Electronics with variable speed preselection Hammer action stop for rotary drilling Auxiliary handle with depth gauge Metal keyless chuck 1.mm Softgrip for less fatigue Reverse action mechanism Easy access to carbon brushes by taking off the Softgrip

Power input Power output No load speed Drilling capacity in concrete / steel / wood Static stalling torque (Max) Gear neck diameter Chuck (S = keyless, Z = keyed) Weight Article number EAN code
500 watt 250 watt rpm 13 / 10 / 20 mm 21 Nm 43 mm S mm 1.6 kg 11079 7
630 watt 315 watt rpm 15 / 13 / 30 mm 21 Nm 43 mm S 1.mm 1.75 kg 11082 7
630 watt 315 watt rpm 15 / 13 / 30 mm 21 Nm 43 mm S 1.mm 1.8 kg 11880 9
630 watt 315 watt rpm 16 / 13 / 40 mm 59 Nm 43 mm S 1.mm 1.9 kg 56

SB2E 750 RX SuperTorque

SB2E 750 R

SB2E 750 RX

ERGOMAX

Powerful 750 watt motor Power and comfortable handling Removable main handle IMB Integrated-Metal-Block Technology for highest durability and stability Two-speed planetary gearbox: for high torque in 1st gear and high speed in 2nd gear FIXTEC, the quick drill bit changing system Synchromeshed 2-speed planetary gear Direct bit reception and locking screw Metal keyless chuck 1.mm Electronic switch with variable speed Reversible action for easy removal of screws Hammer action stop for rotary drilling Service hatches for carbon brushes
Powerful 750 watt motor Ergonomic design for safe and comfortable handling IMB Integrated-Metal-Block Technology for highest durability and stability Two-speed planetary gearbox: for high torque in 1st gear and high speed in 2nd gear Electronics with variable speed preselection Reversible action for easy removal of screws Hammer action stop for rotary drilling Direct bit reception and locking screw Auxiliary handle with depth gauge Easy access to carbon brushes by taking off the Softgrip Metal keyless chuck 1.mm
Standard equipment VarioBox, front handle, metal depth gauge, 4 m cable
Powerful 750 watt motor Ergonomic design for safe and comfortable handling Patented FIXTEC system: quick tool changing in seconds with one hand IMB Integrated-Metal-Block Technology for highest durability and stability Two-speed planetary gearbox: for high torque in 1st gear and high speed in 2nd gear Electronics with variable speed preselection Reversible action for easy removal of screws Hammer action stop for rotary drilling Direct bit reception and locking screw Auxiliary handle with depth gauge Easy access to carbon brushes by taking off the Softgrip Metal keyless chuck 1.mm

Power input Power output No load speed 1st / 2nd gear Drilling capacity in concrete Drilling capacity in stone / steel / wood Static stalling torque (Max) Chuck (S = keyless, Z = keyed) Weight Article number EAN code

750 watt 375 watt

Power input Power output No load speed 1st / 2nd gear Drilling capacity in concrete / steel / wood Static stalling torque (Max) Gear neck diameter Chuck (S = keyless, Z = keyed) Weight Article number EAN code
750 watt 375 watt / rpm 20 / 13 / 40 mm 58 Nm 43 mm S 1.mm 2.6 kg 11496 2
/ rpm 20 mm 22 / 13 / 40 mm 62 Nm S 1.mm 2.4 kg 11724 6
/ rpm 20 mm 22 / 13 / 40 mm 62 Nm S 1.mm 2.4 kg 11725 3

SB2E 850 RS

Powerful 850 watt motor AVS Anti-Vibration-System and Softgrip for more comfortable operation Safety clutch for optimum protection of user and tool Fully insulated metal gearbox Syncromesh two-speed gear Electronics with variable speed preselection Hammer action stop for rotary drilling Reversible action Direct bit reception Metal keyless chuck 1.mm

SB2E 1010 RS

1010 watt power for demanding applications AVS Anti-Vibration-System and Softgrip for more comfortable operation Safety clutch for optimum protection of user and tool Fully insulated metal gearbox Syncromesh two-speed gear Electronics with variable speed preselection Hammer action stop for rotary drilling Reversible action Direct bit reception Metal keyless chuck 1.mm

SB2E 1200 RST

Extra powerful 1200 watt motor for reliable performance Variable preselection of torque and speed via control wheel for precise and secure setting of screws with softstart and no load speed limitation AVS Anti-Vibration-System and Softgrip for more comfortable operation Safety clutch for optimum protection of user and tool Fully insulated robust metal gearbox Syncromesh two-speed gear Hammer action stop for rotary drilling Electronics with reversible action Direct bit reception Metal keyless chuck 1.mm

SB2-1010 D

Very robust 1010 watt sufficient power and torque to drill diameters of up to 35 / 90 mm (with core bit) D-handle Hammer action stop for rotary drilling
Standard equipment Front handle, metal depth gauge, 4 m cable
Angle drill attachment Article number: 45
850 watt 425 watt / rpm 20 / 13 / 40 mm 51 Nm 43 mm S 1.mm 2.9 kg 11323 1

1010 watt 505 watt / rpm 20 / 16 / 40 mm 54 Nm 43 mm S 1.mm 3.1 kg 11278 4
1200 watt 600 watt / rpm 22 / 16 / 45 mm 56 Nm 43 mm S 1.mm 3.1 kg 11304 0
1010 watt 505 watt 800 / 1800 rpm 35 / 16 / 50 mm 88 Nm 57 mm Z mm 4.2 kg 56
Torque preselection: Electronical preselection of torque and speed. Perfect adjustment of torque according to application.

Drills

e.g. BE 630 R SuperTorque
For more than 100 years AEG is the leading manufacturer of professional drills. AEG drills combine ergonomic design and safe and reliable use of tool.
High quality, robust metal chuck for toughest applications. Easy and quick change of worn up carbon brushes by taking off the Softgrip.
High torque planetary gears: for performance from more compact tools, up to 59 Nm.
Electronic Variable speed and preselection of speed for perfect adjustment according to application.
Metal keyless chuck for enhanced durability. User friendly locking function, click when fastened.
Softgrip Ergonomically designed rear handle with airpadded soft rubber. For optimal grip and reduced vibrations.

BE 600 R

Lightweight but tough, this 10 mm drill has excellent handling thanks to its compact ergonomic design Easy access to carbon brushes by taking off the Softgrip Padded rear handle for more comfortable operation
Standard equipment 4 m cable

BE 630 R

Planetary gearbox for low speed and high torque (59 Nm) Ergonomic design for safe and comfortable handling Electronics with variable speed preselection Powerful 630 watt motor for tough applications Auxiliary handle with depth gauge Softgrip for less fatigue Reverse action mechanism for screwdriving applications and longer life time Easy access to carbon brushes by taking off the Softgrip Metal keyless chuck 1.mm
Standard equipment Front handle, depth gauge, 4 m cable
Power input No load speed Drilling capacity in steel / aluminium / wood Static stalling torque Thread cutting to Chuck (S = keyless, Z = keyed) Weight
600 watt rpm 10 / 13 / 30 mm 21 Nm M6 S mm 1.7 kg

630 watt rpm

13 / 16 / 40 mm 59 Nm M8 S 1.mm 1.9 kg

Article number EAN code

11698 0

11696 6

B2E 900 RD

B4-1050

2-speed rotary drill for heavy-duty applications Strong synchromesh gears Chuck spindle M 18 x 2.5 Reverse action Extra long front handle to counterbalance high torque levels 16 mm heavy-duty chuck

Breast plate four-speed rotary drill for heavy drilling up to 32 mm diameter in steel Taper reception (Morse Taper 3) Attachable handle adjustable in length according to application Can be used with magnetic drill stand
Standard equipment Breast plate, attachable handle, 4 m cable
Power input Drill in steel / aluminium / wood Static stalling torque Full load speed 1st / 2nd gear No load speed 1st / 2nd gear Chuck (S = keyless, Z = three jaw) / Tool reception Gear neck diameter Weight
900 watt 16 / 20 / 40 mm 88 Nm
Power input Drill in steel / aluminium / wood Static stalling torque Full load speed 1st / 2nd / 3rd / 4th gear No load speed 1st / 2nd / 3rd / 4th gear Tool reception Gear neck diameter Weight Article number EAN code

1050 watt

32 / 64 / 52 mm > 200 Nm 115 / 160 / 190 / 260 rpm 220 / 260 / 350 / 420 rpm Morse taper mm 9.7 kg 11823 6
/ rpm / rpm Z mm 57 mm 4.2 kg 37

Article number

EAN code

Magnetic Drill Stand

MBE 1200
Lightweight and highly portable magnetic drill stand combined with high torque and variable speed motor 1200 watt motor power transmitted through three reduction gears provide the power to drill a 42-mm-hole through 50 mm thick steel Electronic pack that offers variable speed preselection, soft start, motor overload protection and no load speed limitation Powerful magnetic base ensures safety and stability Electronic switch panel for accessible control
Standard equipment Case, safety braid with hook, arbor for core cutters, cutting oil, safety guard, case

SE 2500

Self drilling fastener screwdriver with high torque for tapping screws Powerful 400 watt motor Metal belt clip can be fixed in 3 different positions Noiseless and highly accurate cut-off clutch Easy removal of the slim profile snap-on depth setting nose Variable speed through electronic trigger control Softgrip and ergonomic design for a comfortable handling Very light weight Easy access to carbon brushes by taking off the Softgrip

Standard equipment VarioBox, SW 10 socket

SE 4000

High speed screwdriver for fast screwdriving in series as in drywall applications Powerful 550 watt motor Metal belt clip can be fixed in 3 different positions Noiseless and highly accurate cut-off clutch Easy removal of the slim profile snap-on depth setting nose Variable speed through electronic trigger control Softgrip and ergonomic design for a comfortable handling Very light weight Easy access to carbon brushes by taking off the Softgrip
Standard equipment VarioBox, bit holder, Phillips No. 2 bit

Screwdrivers

Max. diam. broaching capacity Max. depth broaching capacity Max. drilling (solid) capacity Motor power (110 V = 900 watt) Static stalling torque Magnetic holding power (at drill point pressure) Speed, no load Speed, full load Weight Article number EAN code
42 mm 50 mm 16 mm 1200 watt 85 Nm 10,000 N 300640 rpm 170330 rpm 11.5 kg 11825 0
400 watt 200 watt 02500 rpm 1600 rpm 3.9 mm 6.3/6 mm 1/mm 1.5 kg 11831 1
550 watt 275 watt 03600 rpm 2100 rpm 3.9 mm 6.3/6 mm 1/mm 1.5 kg 11440 5
Power input Power output No load speed Full load speed Drywall screws Self-tapping/wood screws Bit reception Working radius Weight of tool Article number EAN code

SB2E 850 RS SB2E 1010 RS SB2E 1200 RST

GRI ZU

Instructions for use
Please read and save these instructions.

Brugsanvisning

Vr venlight at lse og opbevare.

Gebrauchsanleitung

Bitte lesen und aufbewahren.

Bruksanvisning

Var god ls och tag tillvara dessa instruktioner.

Instruction dutilisation

Prire de lire et de conserver.

Istruzioni duso

Si prega di leggere le istruzioni e di conservarle.

Kyttohje

Lue ja silyt

Kullanm klavuzu

Instrucciones de uso
Lea y conserve estas instrucciones por favor.

Ltfen okuyun ve saklayin

Instrues de servio
Por favor leia e conserve em seu poder.

Gebruiksaanwijzing

Lees en let goed op deze adviezen.

Introduction

You are demanding and expect to purchase quality goods quality offered by Atlas Copco. We have built a durable and reliable electric power tool for you. Please read the instructions for use before first operation so you can handle your power tool effectively and safely. We are sure that buying an AEG Electric Power Tool from Atlas Copco was the right choice! SB2E 850 RS SB2E 1010 RS SB2E 1200 RST Nominal power. 850 W. 1010 W. 1200 W No-load speed* 1st gear. 01350 min-1. 01450 min-1. 01450 min-1 2nd gear. 03200 min-1. 03400 min-1. 03400 min-1 Speed under load max.* 1st gear. 800 min-1. 980 min-1. 1150 min-1 2nd gear. 2000 min-1. 2300 min-1. 2700 min-1 Percussion rate. 51200 min-1. 54400 min-1. 54400 min-1 Drilling capacity in Concrete. 20 mm. 20 mm. 22 mm Brick and tile. 24 mm. 24 mm. 24 mm Steel. 13 mm. 16 mm. 16 mm Wood. 40 mm. 40 mm. 45 mm Drill opening range. 1,5-13 mm. 1,5-13 mm. 1,5-13 mm Drive shank. 1/2x20. 1/2x20. 1/2x20 Chuck neck diameter. 43 mm. 43 mm. 43 mm Weight. 2,5 kg. 2,5 kg. 2,6 kg *In left-hand rotation the maximum speed of rotation is reduced by approx. 50% (only applicable for SB2E 1200 RST) J Please pay attention to the safety instructions in the attached leaflet! J Dust that arises when working on material containing asbestos or stonework containing crystalline silicic acid is harmful to the health. Please follow accident prevention regulations. J Appliances used at many different locations including open air must be connected via a current surge preventing switch. J Always wear goggles when using the machine. It is recommended to wear gloves, sturdy non slipping shoes and apron. J Sawdust and splinters must not be removed while the machine is running. J Do not pierce the motor housing as this could damage the double insulation (use adhesives). J Always disconnect the plug from the socket before carrying out any work on the machine. Only plug-in when machine is switched off. J Keep mains lead clear from working range of the machine. Always lead the cable away behind you. J Always use the auxiliary handle, even if the machine has a safety clutch since this safety clutch only engages when the machine blocks with a jerk. J Do not use diamond core drills on hammer mode. J When drilling in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. Typically the A-weighted noise levels of the tool are: Sound pressure level = 101 dB (A). Sound power level = 114 dB (A). Wear ear protectors! Typically the weighted acceleration is 7 m/s2. Connect only to a single-phase AC current supply and only to the mains voltage specified on the rating plate. Connection to sockets without earth protection is possible as the appliance features protective insulation to DIN 57 740/ VDE 0740 and CEE 20. Radio suppression complies with the European standard EN 55014. When fitting the plug, make sure that the brown (live) wire of this appliance is connected to the plug terminal marked L or coloured red, and the blue (neutral) wire of this appliance is connected to the plug terminal marked N or coloured black. Under no circumstances must the wires of this appliance be connected to the earth terminal of the plug marked either E, with the earth symbol or coloured green or green/yellow. The electronic drill/screwdriver can be universally used for drilling, percussion drilling, screwdriving and cutting screw threads. Do not use this product in another way as stated for normal use. 1 SB2E 850 RS, SB2E 1010 RS, SB2E 1200 RST

Technical Data

Advice for your safety
Measured sound value Measured vibration value Mains connection

ENGLISH

Brief description Lock button for switch locking Selector lever for switching between drilling and percussion drilling. Fully insulated metal gear box for long durability and protection from electric shock. Bit reception it is possible to fit drill bits directly into the working spindle. Ergonomically designed housing with soft grip. Torque adjustment knob (cut-out) (only applicable for SB2E 1200 RST)

A GRI ZU

Keyless chuck for tightening without a key. (according to standard equipment) Gear lever for switching between 1st and 2nd gear. Auxiliary handle, has an integral depth gauge and can be rotated in various positions. (according to standard equipment) AntiVibrationSystem AVS. The drive motor is suspended independently of the switch handle, insulating elements absorb up to 50 % of the vibration when hammer drilling. Reversing lever for changing from forward to reverse rotation due to a lockout mechanism, switching the lever is only possible if the On-/Off switch is not depressed. The electronic gentle start-up raises the r.p.m. continuously up to the maximum set so that you can drill with pin-point accuracy. (only applicable for SB2E 1200 RST) Built-in safety clutch helps prevent the machine from rotating if the drill bit jams. Three jaw chuck (according to standard equipment) Switch trigger for switching the machine on and off, and for smooth starting and varying speed. Adjuster wheel for speed presetting
Modifications: Text, diagrams and data are correct at the time of printing. In the interest of continuous improvement of our products, technical specifications are subject to alteration without prior notice.
SB2E 850 RS, SB2E 1010 RS, SB2E 1200 RST
Keyless chuck (according to standard equipment) Changing the keyless drill chuck
Always disconnect the plug from the socket before carrying out any work on the machine.
1. Usually, the chuck can be removed by
hand: steady the drill spindle with a fork wrench and unscrew the chuck by turning it anticlockwise.
2. Should the chuck be stuck on the drill

spindle, fit another fork wrench to the chuck (see illustration) or fix an Allen key in the chuck. If necessary, hit the key shaft lightly with a plastic hammer.
3. Mount the chuck in reverse order.
Under high strain in anticlockwise operation, the chuck might become loose. Please use the bit reception to loosen screws in anticlockwise operation. Inserting the tool Completely insert the tool shaft into the open chuck. Hold the grip and firmly tighten the chuck by turning the sleeve in the GRIP direction.

F AU GRIP ZU

After the clamping jaws have tightened around the tool shaft, turn the chuck a further 1/4 in order to let the chucking power retention engage. Only than can the tool itself be chucked by vigorously turning the sleeve in the GRIP direction (it engages audibly with a grating noise.) The chucking power retention is mainly needed for percussion drilling. When the chuck is opened with a strong jerk as far as it will go, it is possible that it cant be closed anymore. Instead, grating can be felt (as if the chuck were overtightened). In this case turn the sleeve once more in the RELEASE direction; now it can be closed again. The chuck is not damaged by this grating. When percussion drilling in stone the drill bit should be checked for tight seat in the chuck after first use. If necessary, retighten the chuck by hand. Removing the tool Hold the grip and open the chuck by turning the sleeve in the RELEASE direction. When turning the sleeve the chucking power retention is released, after 1/4 turn the clamping jaws open and release the clamped tool.

GRIP ZU

Due to the high power potential of the percussion drill the chuck might get stuck at very high load and can not be opened by hand. In this case, please steady the chuck head with a fork wrench and loosen the front sleeve of the chuck with aid of a footprint anticlockwise (see illustration). The use of a footprint will not cause any damage to the chuck. Three jaw chuck (according to standard equipment) Changing the three jaw chuck
1. Hold the drive shank with the open-jaw

spanner.

2. Insert the drill chuck key in the drill chuck

and loosen the drill chuck to the left by tapping it lightly with a rubber hammer.

Inserting tools

The chuck can be used for drill bits or screwdriver bits. For this purpose, open the chuck, insert the selected bit and secure by tightening the chuck with the chuck key. To remove tools insert chuck key into one of the three holes at the chuck mouth and turn anti- clockwise.
Direct reception of screwdriver bits
Screwdriver bits can be inserted directly into the working spindle. This results in the following advantages: Screwdriver bits can be exchanged easier and quicker. Better view at the screw fitting. The weight of the machine is reduced when not working with the chuck.
Positioning the auxiliary handle
The auxiliary handle can be positioned as required. Loosen the clamping by twisting the auxiliary handle, bring the auxiliary handle into the required position and refasten the handle.

Setting the depth gauge

For drilling the required depth, insert the depth gauge into the provided boring in the handel and fasten it at the required drilling depth.
Switching over drilling percussion drilling
Turn changeover lever to symbol percussion drilling.
for drilling Turn the switch to position in metal, plastic, and wood, and for screwdriving.

Changing gear

The gears can be changed when the machine is switched off or is running under no load. Gear change lever in position 1: 1st gear Gear change lever in position 2: 2nd gear
Switching between forward and reverse rotation
Select direction of rotation with reversing lever. Due to a lockout mechanism, the reversing lever can only be switched when the On-/off switch is not depressed. Only change direction of rotation when the machine has stopped.

Speed selection

Set operating speed with the dial. A = lowest speed.
F = highest speed. The speed can be controlled in infinitely variable steps up to the speed preselected at the speed dial, according to the finger pressure on the On-/off switch. The whole travel of the On-/off switch is available even if the lowest speed is preselected, since the speed is electronically limited. This means that the lower the speed selected at the adjuster wheel, the more sensitively pressure can be applied at the On-/off switch. During continuous operation with switch locked in the position the machine will run at the preselected speed. Under the effect of extreme electromagnetic interferences from the outside, temporary variations in the speed of rotation could arise in particular cases. ENGLISH 5 SB2E 850 RS, SB2E 1010 RS, SB2E 1200 RST
Torque Adjustment (only applicable for SB2E 1200 RST)
Setting the torque (cutoff moment) with the setting wheel. 1 = smallest torque to be set.

6 = largest torque to be set.
= drilling operation. no torque limitation The torque is limited electronically with the setting wheel and is available almost constantly for the entire speed range. If the expenditure of energy exceeds the set torque e.g. when the screw is screwed-in flush the machine sets the speed of rotation to zero. The set torque, however, is still available at the work spindle as long as the On-/Off switch is depressed, and can be used to level and fix the screw.
To loosen screws in left-hand operation the max. torque is available for the entire speed range.

A A A A

Torque

1-2 3-5 1-3 4-6

For drilling/percussion drilling with large Gear no. drill bits the torque setting wheel must be set to. In this setting the torque limitation is switched off and the maximum torque becomes available. Small drill bits can be protected by limiting the torque. On-/off switch Intermittent use Switching on: Press On-/off switch Switching off: Release On-/off switch Continuous use Switching on: Press the On-/off switch and then the locking button, after that release on-off switch. Switching off: Press the On-/off switch and then release.
The speed can be controlled in infinitely variable steps up to the speed preselected at the speed dial, according to the finger pressure on the On-/off switch.
The settings stated in the table are standard values. The optimum setting depends on the material and can determined by trying out.
Advice for operation Tips on drilling in masonry
Take the drill out of the hole from time to time to remove dust. Switch to percussion-drilling for concrete, hard bricks and tiles, stone, hard cement, and marble (but not when drilling the surface of marble). For tiles, paving-stones, soft bricks and tiles, soft cement, breeze-block and plaster, switch to normal drilling. Use percussion carbide tipped masonry drill-bits. When drilling a hard, smooth surface (e.g. tiles), cover the point to be drilled with adhesive tape in order to prevent the drill tip from skidding. Center punch the point you have marked for drilling. Always hold sheet metal firmly in a vice. Lay a block of wood under thin metal to prevent it from distorting. Use HSS spiral drill bits. (For white cast iron, use drill bits with special tips.) Before drilling large-diameter holes, first drill a small pilot hole. Use lubricant: Steel: Oil Aluminium: Turpentine, paraffin Brass, copper, cast iron: no lubricant, but take the drill out of the hole frequently to cool it off. Center punch the point you have marked for drilling. To prevent the wood from splintering when the drill bit tip breaks through, lay a piece of scrap wood underneath it, or drill from both sides.The maximum drill-diameter can only be reached with a Forstnerdrill bit. Use screwdriver bits of the appropriate size and shape. Suitable screws can be driven into softwood without pre-drilling. Pre-drill into hardwood or for screws of large diameter. Pre-drill further for countersunk screws. For woodscrews threaded less than their full length, pre-drill approx. half the length of the screw. Under high strain in anticlockwise operation, the chuck might become loose. Please use the bit reception to loosen screws in anticlockwise operation. The ventilation slots of the machine must be kept clear at all times. If the machine is mainly used for percussion drilling, regularly remove collected dust from the chuck. To remove the dust hold the machine with the chuck facing down vertically, and completely open and close the chuck. The collected dust will fall from the chuck. It is recommended to regularly use cleaner (Id.No. 19) for the clamping jaws and the clamping jaw borings. In order to guarantee constant readiness for operation, the machine should be checked for worn carbon brushes at one of the AEG aftersales service agencies. Use only AEG accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the tendigit No. as well as the machine type printed on the label and order the drawing at your local service agents or directly at: Atlas Copco Electric Tools GmbH, Postfach 320, D71361 Winnenden.