Grinders

e.g. WS 14-125
AEG offers a versatile grinder range in different power classes. Within the powerful watt range AEG offers different grinders, sanders and lightweight polishers. All of the grinders can be used with the AEG FIXTEC nut. Most of the grinders are already equipped with these special nuts. The safety guard of all grinders can be adjusted without any tools. All grinders are designed ergonomically for long working shifts. For different applications it is possible to turn the gear head in 90 steps.
FIXTEC nut Unique AEG made FIXTEC nut. No tools necessary to clamp discs No tools needed to change discs Integrated safety clutch Can even be used for new 1 mm discs.
Spindle lock All grinders are equipped with a special safety spindle lock protecting the gear mechanism.
Flat gear case For maximum usage of grinding discs.
DIGITRONIC Designed for AEG Power Tools. Angle grinders containing the AEG Digitronic are equipped with variable speed selection or constant speed precise tacho electronic control thermal motor overload protection soft start no load speed limitation.
Metal Sturdy metal gear box for long service life.
Keyless Patented mechanism to adjust safety guards. Guards can be adjusted without any tools.
3 positions All grinders above 1500 watt have the possibility to fix the additional handle in 3 different positions.
4 m power cable Long professional cable for freedom of power supply.
Deadman Additional safety. It is not possible to lock the switch. Integrated in all tools with this sign.

WS 8-125 MX

Angle Grinders

WS 8-125 M

Sturdy metal gearbox Spindle lock, with safety mechanism Disc diameter 125 mm Gearhead can be rotated at 90 intervals Compact design Optimised for left and right hand usage Patented snap lock guard
Sturdy metal gearbox Spindle lock, with safety mechanism Disc diameter 125 mm FIXTEC patented nut for fast and easy disc change Gearhead can be rotated at 90 intervals Compact design Optimised for left and right hand usage Patented snap lock guard

WSE 9-125 MX

Sturdy metal gearbox Spindle lock, with safety mechanism FIXTEC patented nut for fast and easy disc change Electronics Gearhead can be rotated at 90 intervals Compact design Optimised for left and right hand usage Patented snap lock guard
Standard equipment VarioBox, FIXTEC nut, flange, disc, lock-on switch, additional handle, safety guard, 4 m cable
Standard equipment Lock-on switch, additional handle, flange, flange nut, safety guard, key

WS 8-115 M

Superior grip, superior ergonomics, extra slim motor diameter, extra low weight!

(no picture)

Electronics benefits of WSE 9-125 MX Variable speed selection: for setting the ideal speed for any material Constant speed within each speed setting Thermal motor-overload protection for a long lifetime Soft start for improved surface treatment No load speed limitation to reduce noise emission
Same features as WS 8-125 M only with Disc diameter 115 mm

Technical data

Power input Power output No load speed Cutting depth Grinding disc Spindle thread Weight
WS 8 -125 M / WS 8 -115 M
750 watt 410 watt 10,000 rpm 33 / 28 mm 125 / 115 mm M 14 1.8 kg
750 watt 410 watt 10,000 rpm 33 mm 125 mm M 14 1.8 kg
850 watt 495 watt 3000 10,000 rpm 33 mm 125 mm M 14 1.8 kg

Article number EAN code

70 / / 9

11678 2

11654 6

WS 1000-125 M

Powerful 1000 watt motor 125 mm angle grinder Patented snap-lock guard Spindle lock with safety mechanism Lock-on switch Compact barrel grip

WS 1200-125 M

Powerful 1200 watt motor 125 mm angle grinder Patented snap-lock guard Spindle lock with safety mechanism Lock-on switch Compact barrel grip

WS 12-125 MX

Powerful 1200 watt motor 125 mm angle grinder FIXTEC patented nut for fast and easy disc change Patented snap-lock guard Ergonomic handle Spindle lock with safety mechanism Automatic cut-off carbon brushes Easy change of carbon brushes Flat metal gear head for good visibility of work piece and optimised cutting depth Large surface safety switch
Standard equipment VarioBox, FIXTEC nut, flange, disc, safety switch (deadman), additional handle, safety guard, 4 m cable

WSE 14-125 MX

Powerful 1450 watt motor FIXTEC patented nut for fast and easy disc change Digitronic Patented snap-lock guard Spindle lock with safety mechanism Automatic cut-off carbon brushes Easy change of carbon brushes Flat metal gear head for good visibility of work piece and optimised cutting depth Large surface safety switch
Standard equipment Lock-on switch, additional handle, flange, flange nut, safety guard, keys, 4 m cable

DIGITRONIC

Electronics benefits of WSE 14-125 MX Variable speed selection: for setting the ideal speed for any material Constant speed within each speed setting Tacho electronic, optimal speed regulation and silent run for a better working environment Thermal motor-overload protection for a long lifetime Soft start for improved surface treatment No load speed limitation to reduce noise emission Electronics benefits of WSC 14-125 MX Same as WSE 14-125 MX, but with constant speed at 11,000 rpm

WSC 14-125 MX

Same features as WSE 14-125 MX but constant speed electronics and in carton
1010 watt 600 watt 11,000 rpm 33 mm 125 mm M 14 2.2 kg
1200 watt 720 watt 11,000 rpm 33 mm 125 mm M 14 2.4 kg
1200 watt 720 watt 11,000 rpm 33 mm 125 mm M 14 2.5 kg
WSE 14-125 MX / WSC 14-125 MX
1450 watt 870 watt 2600 11,000 rpm / 11,000 rpm 33 mm 125 mm M 14 2.5 kg

11794 9

11849 6

11716 1

05 / / 7

Sander

SE 12-180
1200 watt sander with electronics for high grade steel, sheet metal etc. High motor torque and ideal speed range for sanding, especially for fine surface work Ergonomic design for long work shifts Automatic cut-off carbon brushes Service hatch for easy change of carbon brushes Spindle lock Large surface switch

Standard equipment Lock-on switch, additional handle with guard, flange nut, flexible backing pad, 4 m cable

PE 150

1200 watt polisher with electronics Ergonomic design for long work shifts with special new nose cap Special gear for high spindle torque and ideal polishing speed Automatic cut-off carbon brushes Service hatch for easy change of carbon brushes Spindle lock Large surface switch Light weight, high torque
Standard equipment Lock-on switch, additional handle, cap, backing pad, 4 m cable

Polisher

Electronics benefits of PE 150 Variable speed selection: for setting the ideal speed for any material Constant speed within each speed setting Tacho electronic, optimal speed regulation and silent run for a better working environment Thermal motor-overload protection for a long lifetime Soft start for improved surface treatment No load speed limitation to reduce noise emission
Electronics benefits of SE 12-180 Variable speed selection: for setting the ideal speed for any material Constant speed within each speed setting Tacho electronic, optimal speed regulation and silent run for a better working environment Thermal motor-overload protection for a long lifetime Soft start for improved surface treatment No load speed limitation to reduce noise emission
Power input Power output No load speed Grinding disc Spindle thread Weight
1200 watt 600 watt rpm 180 mm M 14 2.5 kg
1200 watt 600 watt rpm 150 mm M 14 2.1 kg

11717 8

11718 5

WSL 230

WSL 180
Powerful 2000 watt motor Safety spindle lock Extra-flat gearhead for work in hard-to-reach places Three positions for the additional handle For cutting and grinding discs with 180 mm Cut-off carbon brushes
Standard equipment Lock-on switch, flange, safety guard, flange nut, additional handle, keys, 4 m cable

WSLB 230 X

Powerful 2000 watt motor Safety spindle lock Starting current limitation (16 A) Extra-flat gearhead for work in hard-to-reach places Three positions for the additional handle For cutting and grinding discs with 230 mm FIXTEC patented nut for fast and easy disc change Cut-off carbon brushes

WS 180 S

WSA 230 S
Powerful 2300 watt motor Safety spindle lock Extra-flat gearhead for work in hard-to-reach places Three positions for the additional handle For cutting and grinding discs with 230 mm Cut-off carbon brushes Deadman switch
Standard equipment Safety switch (deadman), safety guard, flange nut, flange, additional handle, keys, 4 m cable
Powerful 2300 watt motor Safety spindle lock Extra-flat gearhead for work in hard-to-reach places Three positions for the additional handle For cutting and grinding discs with 180 mm Cut-off carbon brushes
Standard equipment Lock-on switch, safety guard, flange nut, flange, additional handle, keys, 4 m cable
Same features as WSL 180, but with Disc diameter 230 mm Deadman switch
Standard equipment Safety guard, flange nut, additional handle, keys, safety switch (deadman), 4 m cable
Standard equipment Lock-on switch, flange, safety guard, additional handle, keys, FIXTEC nut, 4 m cable

WSB 230 S

Bench cutter WS-T1 Solid, smooth surfaced cast iron base Automatic swing-back cutting disc guard Spark protection Mitre cuts possible to 45 Suitable for all angle grinders with M 14 spindle thread and disc diameters of at least 230 mm, without conversion Maximum disc use through favourable swivel point and fully adjustable vice Robust die-cast clamping device (with hard rubber) for angle grinders Stable die-cast aluminium casing Article number 90 EAN code 2

WSLB 230

Same features as WSA 230 S, but with starting current limitation
Same features as WSLB 230 X, but without FIXTEC nut
2000 watt 1200 watt 8500 rpm 43 mm 180 mm M 14 5.2 kg
WSL 230 / WSLB 230 / WSLB 230 X
2000 watt 1200 watt 6600 rpm 68 mm 230 mm M 14 5.4 kg
2300 watt 1400 watt 8500 rpm 43 mm 180 mm M 14 5.5 kg

WSA 230 S / WSB 230 S

2300 watt 1400 watt 6600 rpm 68 mm 230 mm M 14 5.7 kg

10203 7

00 / 30 / / 2 / 9

11671 3

25 / / 9