Reviews & Opinions
Independent and trusted. Read before buy AEG-electrolux ZB 250 X!

AEG-electrolux ZB 250 X

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
AEG-electrolux ZB 250 X, size: 557 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

AEG-electrolux ZB 250 XAbout AEG-electrolux ZB 250 X
Here you can find all about AEG-electrolux ZB 250 X like manual and other informations. For example: review.

AEG-electrolux ZB 250 X manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a AEG-electrolux ZB 250 X please write about it to help other people.

 

[ Report abuse or wrong photo | Share your AEG-electrolux ZB 250 X photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
tigerstripedcat 2:21am on Wednesday, August 4th, 2010 
I cannot use it miss ordered tried for a week to get an RA# and no way sohave to eat this item which I cannot use! "High Quality","Durable". I use the discs to archive personal and friends non-copyrighted music on a digital format. "Highly Compatible","Label great - no smear".
toga13 7:04am on Friday, May 28th, 2010 
I have used these media with several burners and only got coasters because of the burner problem.
Steven_Shelton 4:28pm on Friday, April 30th, 2010 
Verbatim: still one of the best I had problems with Memorex DVD-rw media failing after two or three DVD burns.
bala 10:07am on Wednesday, March 10th, 2010 
Have not opened them yet. I am hoping I purchased what I need. I do not understand the 4X. Old Reliable As usual, Verbatim comes through. With nary a coaster in the bunch.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

Article Latch plate For T-handle or latch type handle (also order ZH 800) T-handle without lock with lock

Type ZH 122

ZX 455

ZH 138 ZH 139

ZX 454
Latch handle without lock with lock Cabinet handle closure for semi-cylinder, with lead-sealable cap Dummy insert instead of a lock cylinder

ZH 140 ZH 141 ZH 128

ZH 142
Nipple flange* for feeding in the cable A and U cabinets Standard closure*
Cabinet handle closure Senate lock Berlin Cabinet handle closure Closure EO 12

ZH 127

ZH 103

ZB 113

Safety cylinder with 2 keys Espagnolette closure Espagnolette closure in conjunction with standard closure and safety cylinder for retrofitting into A, B and U cabinets for overall height 0 (4 grid spacing) for overall height 1 (5 grid spacing) for overall height 2 (6 grid spacing) for overall height 3 (7 grid spacing) for overall height 4 (8 grid spacing) for overall height 5 (9 grid spacing) Set for installing actuation possibilities in conjunction with ZH 120/ZH 121/ZH 122 Latch plate for double-bit pin 3mm standard and 5 mm (also order ZH 800) Operating pin double bit 3 mm double bit 5 mm Latch plate For triangular and square operating pins and also for Daimler-Benz insert (also order ZH 800) Operating pin Triangular 7 mm Triangular 8 mm Square 6 mm Square 7 mm Square 8 mm Daimler-Benz insert

ZB 111

Espagnolette closure Espagnolette closure in conjunction with ZH 103, ZH 120, ZH 121, ZH 122, ZH 127 and ZH 128 lock system for overall height 0 (4 grid spacing) for overall height 1 (5 grid spacing) for overall height 2 (6 grid spacing) for overall height 3 (7 grid spacing) for overall height 4 (8 grid spacing) for overall height 5 (9 grid spacing) FS cabinets Flange IP 54 Attention: Always order flanges as additional items! The cabinet has one flange cutout per panel width at the top, Knockouts are provided for the side and bottom. Cover flange plate 1 ea. 10 ea. Flange for PG screw fittings 1 x PG 42 / 2 x PG ea. 10 ea. Flange for PG screw fittings 2 x PG 29 / 4 x PG 16 / 3 x PG 13,5 / 2 x PG ea. 10 ea. Membrane flange 1 ea. 10 ea. Touch guard* only for Single meter panels Double meter panels Insulating frame for the side flange knockouts of the FS cabinets (in order to maintain the double insulation when assembling cabinets) *Spare part included in the scope of delivery.

Dummy insert (instead of a lock cylinder) Flange IP 54 Attention: Always order flanges as additional items! The cabinet has one flange cut-out per panel width at the top. Knockouts are provided for the side and bottom.
Operating pin Triangular 7 mm Triangular 8 mm Square 6 mm Square 7 mm Square 8 mm Daimler-Benz insert ZH 137 Operating keys Double bit 3 mm* 5 mm Triangular 7 mm 8 mm Square 6 mm 7 mm 8 mm Daimler-Benz ZH 165 Universal key Double bit 3 mm/5 mm Triangular 8 mm Square 6 mm/8 mm Latch plate for T-handle and latch handle
Cover flange plate 1 ea. 10 ea. Flange for PG screw fittings 1 x PG 42 / 2 x PG ea. 10 ea.
Flange for PG screw fittings 2 x PG 29 / 4 x PG 16 / 3 x PG 13.5 / 2 x PG ea. 10 ea. Membrane flange 1 ea. 10 ea. touch guard* only for FS cabinets Meter panels, 1-level Meter panels, 2-level External attachment* 4 ea.

ZW 123 ZW 124 ZW 125P4

Espagnolette guide* with fastening material
T-handle without lock, complete ZH 138 with lock, complete ZH 139
NF bracket for C, FS and G cabinets* ( 2 ea., with fastening material) required for fastening the centre support rail

ZW 104P2

*Spare part included in the scope of delivery 2-6
Centre support rail* 1 panel wide 2 panels wide 3 panels wide 4 panels wide 5 panels wide Door grounding set 10 mm2
ZW 41 ZW 42 ZW 43 ZW 44 ZW 45 XZ 77
High socket Front / rear side removable, Colour RAL 7005, height 150 mm for panel width5 FS and G cabinets
CRG 1 CRG 2 CRG 3 CRG 4 CRG 5
Insulating frame for the side flange knock-outs of the FS cabinets (in case of connection to maintain double insulation)

ZW 194

Busbar connector (with insulating frame) for FS cabinets Cabinet - cabinet 1 set 4-pole, 250 A 1 set 5-pole, 250 A 1 set 4-pole, 355 A 1 set 5-pole, 355 A ZW 185 ZW 186 ZW 187 ZW 188 ZW 129LR
N and PE bars with holder each with 23 x 10 + 4 x 16 mm2 C cabinets Retaining element* top right
ZW 290 Corner support* 1 set left and right (2 ea.)
Retaining element* top left
ZW 291 Assembly set For installing meter panels, also order 1 x ZB 15 per panel width (250 mm). ZW 292 Socket Colour RAL 7005, height 50 mm for panel width5 High socket Front / rear side removable, Colour RAL 7005, height 150 mm for panel width5 ZB 15
Retaining element* middle
Support element* bottom Fastening element* for standard panels

ZW 293

GSR 1 GSR 2 GSR 3 GSR 4 GSR 5

ZW 294

Carrier rail* for frame holder and holding element Socket Colour RAL 7005, height 50 mm for panel width 5

ZW 295

GRG 1 GRG 2 GRG 3 GRG 4 GRG 5

CSR 1 CSR 2 CSR 3 CSR 4 CSR 5
*Spare part included in the scope of delivery 2-7
floor standing cabinets for distribution board construction, for indoor use
WS floor standing cabinets, double insulated IP 55
floor standing cabinets in double insulated design, prepared for installation of distribution board and meter panels or modules # IN 630A # Enclosure made of 1.5 mm sheet steel, with 2 mm thick door # RAL 7035 powder-coated # With double insulation coating # The side flange are provided as knockouts # The top and bottom flange openings can optionally be sealed with nipple flanges, sponge rubber flanges or cover flange plates. # Flanges must be ordered separately # Standard closure: Double bit 3 mm # Doors: Cabinets one, two or three panels wide have a single door with right stop. Double doors with four or more panel widths # With mounting frame, standard panel installation set and touch guard
Variant 3.1 with standard panels (combination sets, distribution board panels and meter boards)
Variant 4.1 with project-related distribution board combinations up to 630 A directly from the factory (TXG modules)
W floor standing cabinets, grounded # IN 850A IP 55.
floor standing cabinet, grounded
# Enclosure made of 1.5 mm sheet steel, with 2 mm thick door # RAL 7035 powder-coated # As control cabinet with mounting plate or mounting frame # As distribution board cabinet for mounting frame plus standard panel installation set with touch guard # As distribution board cabinet for TXG modules with touch guard # The side flange are provided as knockouts # The top and bottom flange openings can optionally be sealed with nipple flanges, sponge rubber flanges or cover flange plates. # Flanges must be ordered separately # Standard closure: Double bit 3 mm # Doors: Cabinets one, two or three panels wide have a single door with right stop. Double doors with four or more panel widths
WA floor standing cabinet series-connectable, grounded IP 54.
floor standing cabinet, grounded # IN 850A # Enclosure made of 1.5 mm sheet steel, with 2 mm thick door # RAL 7035 powder-coated # As control cabinet with mounting plate or mounting frame # As distribution board cabinet for mounting frame plus standard panel installation set with touch guard # As distribution board cabinet for TXG modules with touch guard # The vertical openings on both sides of the cabinet allow connecting cables and busbar systems to be moved quickly and easily. # Side walls must be ordered separately A separate cross member that can also be used provides both a secure connection for the seriesconnected enclosure in the rear area, as well as optimum stability during transport. # Connection set must be ordered separately # The top and bottom flange openings can optionally be closed with nipple flanges, sponge rubber flanges or cover flange plates. # Flanges must be ordered separately # Standard closure: Double bit 3 mm # Doors:Cabinets one, two or three panels wide have a single door with right stop. Double doors with four or more panel widths.

1870 x 320 x x 570 x x 820 x x 1070 x 360
WSR 1 WSR 2 WSR 3 WSR 4 WSR 5 WSR 6
WRG 1 WRG 2 WRG 3 WRG 4 WRG 5 WRG 6

ZW 400LR

ZW 401
# = Necessary accessories = Accessories as required
Article Door grounding set for W cabinets Transport eyebolts 1 set = 4 ea. complete with attachment material Insulating frame for the side flange knock-outs of the WS cabinets (in case of connection to maintain double insulation)

Type ZL 8

Article Cable clamp rails for high socket for WRG 1 for WRG 2 for WRG 3 for WRG 4 for WRG 5 for WRG 6 Clamps (cable clamps) for cable clamp rails from 22-28 mm from 40-46 mm from 64-70 mm
ZW 281 ZW 282 ZW 283 ZW 284 ZW 285 ZW 286

ZK 143 ZK 144 ZK 145

2 - 13
2 mm sheet steel, galvanised

Mounting frame

Standard panel Installation set
with touch guard Required for the installation of standard panels, in conjunction with the mounting frame
Standard panels NF Mounting set
For the installation of meter panels. Also order 1 x ZB 15 per panel width (250 mm).
WM 18 WM 28 WM 38 WM 48 WM 28 + 38 WM 38 + 38
WR 18 WR 28 WR 38 WR 48 WR 28 + 38 WR 38 + 38
WB 18 WB 28 WB 38 WB 48 WB 58 WB 68

Necessary accessories

Variant 1 Variant 2 Variant 3 Variant 3.1 Variant 4 Variant 4.1 # = Necessary accessories = Accessories as required # # # # # # # #
Installation variants for standard panels on WR mounting frame
The 150 mm grid spacing of the centre support rail means that standard panels can be combined with no problems. One standard panel centre support rail ZW 41-44 and the matching NF bracket ZW 61LR must be ordered in the case of Variant 5.

2 - 14

touch guard
Required for installing TXG modules
Distribution board combinations
project-specific Installation at the factory

Cover plate

for high socket WRG RAL 7005
ZW 90 ZW 91 ZW 92 ZW 93 ZW 94 ZW 95
ZW 201 ZW 202 ZW 203 ZW 204 ZW 205 ZW 206
Accessories for floor standing cabinets for distribution board
Article touch guard Required for installing meter panels in WS cabinets. Single meter panel Double meter panel Sheet steel partitions for W and WS cabinets for installing on WR mounting frames and NF installation set with distribution board panels Overall height 00 Overall height 0 Overall height 1 Overall height 2 Overall height 3 Overall height 4 Overall height 5 ZW 169 ZW 170 ZW 171 ZW 172 ZW 173 ZW 174 ZW 175 ZW 96 ZW 97 Type

XZ 72P4

Partitions (cabinet cabinet) for Series XA (sheet steel design, galvanised, 1.5 mm)
Overall height 8 Depth 300 mm Depth 400 mm Depth 600 mm Depth 800 mm Overall height 10 Depth 300 mm Depth 400 mm Depth 600 mm Depth 800 mm for Series XS (insulating material, 2 mm)

XZ 78 XZ 60 XZ 61 XZ 62

XZ 79 XZ 63 XZ 64 XZ 65

ZW 55 ZW 56 ZW 57 ZW 58

Overall height 8 Depth 400 mm Depth 600 mm Overall height 10 Depth 400 mm Depth 600 mm

XZ 66 XZ 67

XZ 69 XZ 70

ZW 66 ZW 67

Cable clamp rails for routing socket for XRG2 for XRG3 for XRG4 for XRG5 XZ 232 XZ 233 XZ 234 XZ 235

3 - 10

Lock replacement parts for safety closure system
Article Escutcheon for two-way operating mandrel 3 mm (standard) and 5 mm Type ZH 120 Article Cabinet handle closure for semi-cylinder, 45 mm, with lead-sealable cap Type ZH 123
Operating mandrel Two-way 3 mm Two-way 5 mm Escutcheon for triangular and square operating mandrels and for Daimler-Benz insert
Dummy insert (instead of a lock cylinder) ZH 130 ZH 131 ZH 121 Universal key Two-way 3 mm/5 mm Triangular 8 mm Square 6 mm/8 mm
Operating mandrel Triangular 7 mm Triangular 8 mm Square 6 mm Square 7 mm Square 8 mm Daimler-Benz ZH 132 ZH 133 ZH 134 ZH 135 ZH 136 ZH 137
Operating key Two-way 3 mm 5 mm Triangular 7 mm 8 mm Square 6 mm 7 mm 8 mm Daimler-Benz
Escutcheon for T-handle and latch handle
Latch handle without lock, complete ZH 140

3 - 11

Spare parts for XA and XS cabinets
Article Bottom plate (1 set = 3 parts) for Series XA: Depth panels wide (520 mm) 3 panels wide (770 mm) 4 panels wide (2 parts, 493 + 493 mm) 5 panels wide (2 parts, 493 + 743 mm) Depth panels wide (520 mm) 3 panels wide (770 mm) 4 panels wide (2 parts, 493 + 493 mm) 5 panels wide (2 parts, 493 + 743 mm) Depth panels wide (520 mm) 3 panels wide (770 mm) 4 panels wide (2 parts, 493 + 493 mm) 5 panels wide (2 parts, 493 + 743 mm) Holder for bottom plate, 4 ea. Type Article Door parts Hinge Door opening angle 130 degrees for Series XA and XS 3 ea. with fastening material and hinge pin Hinge* Door opening angle 180 degrees for Series XA and XS (only when cabinets are set up individually). 3 ea. with fastening material and hinge pin. Double hook with fastening material XZ 104P3 Type
XZ 80 XZ 81 XZ 82 XZ 83 XZ 84 XZ 85 XZ 86 XZ 87 XZ 88 XZ 89 XZ 90 XZ 91 XZ 101P4

XZ 105P3

ZH 147
Bottom plate can also be used as cover plate for Series XS: Depth panels wide (498 mm) 3 panels wide (748 mm) 4 panels wide (998 mm) Depth panels wide (498 mm) 3 panels wide (748 mm) 4 panels wide (998 mm) Lock for bottom plate Series XS 4 ea. with cap Other cabinet parts Protective cap for XS on the corner connector for maintaining the protective insulation Sealing profile for cabinet corners for Series XA and XS 8 ea. XZ 180 XZ 92 XZ 93 XZ 94

2 disconnector Size 1 or 2, 2 panels wide 1 ea. 10 ea.
3 disconnector Size 1 or 2, 3 panels wide 1 ea. 10 ea. Captive nut 10 ea. for disconnector cross-rails (ZX 31, ZX 34 and ZW 162) M 6 (ZW 159, ZW 160) M 8

3 - 14

Profile rails
WR mounting frame with width rail E WR mounting frame with deep-mounting bracket, ZW 60P2 width rail F
Width rail E, width (mm) Width rail F, width (mm) Profile No. 1 (aluminium) 25 x 14 mm Fastening hole 6.2 mm Type
Profile No. 2 (aluminium) 25 x 20 mm Fastening hole 6.2 mm Type
Profile No. 3 (aluminium) 32 x 25 mm Fastening hole 8.2 mm Type
Width rail F Type ZW 248 ZW 249 ZW 250 ZW 251

3 - 15

System Overview Free extension
The switchgear cabinet Series XS double-insulated.

3 - 16

Variant V Mounting with profile rails
Variant VI Mounting with busbar systems up to 3500 A

Busbars with holders

Variant VII Mounting with EDF distribution board and meter panels

mounting set XM

Variant VIII Mounting with swing frame

Swing frame

Variant IX Mounting for 19 technique 19 plug-in unit

3 - 17

XA/XS cabinets for free extension, for indoor use
XA cabinet XS cabinet XA side walls
double insulated Empty cabinet with door, backplate, top cover plate, bottom plate Colour: RAL 7032 Flanges must be ordered separately. Type Width in mm
grounded Empty cabinet with door, backplate, top cover plate, bottom plate Colour: RAL 7032 Flanges must be ordered separately. Overall height Grid spacing RE T 400 mm Panels PLE Type Width in mm

576 720

2/8 XA4 3/8 XA4 4/8 XA4 5/8 XA4

1100 1350

2/8 XS 4 3/8 XS 4 4/8 XS 4

XW 84P2

T 600 mm
2/8 XA 6 3/8 XA 6 4/8 XA 6 5/8 XA 6
2/8 XS 6 3/8 XS 6 4/8 XS 6

XW 86P2

XW 86SP2
H 1900 mm T 800 mm 2/8 XA 8 3/8 XA 8 4/8 XA 8 5/8 XA 1350 XW 88P2

Overall height Grid spacing RE T 400 mm 2/10 XA 4 3/10 XA 4 4/10 XA 4 5/10 XA 1350 2/10 XS 4 3/10 XS 4 4/10 XS XW 104P2 XW 104SP2
H 2200 mm T 600 mm 2/10 XA 6 3/10 XA 6 4/10 XA 6 5/10 XA 1350 2/10 XS 6 3/10 XS 6 4/10 XS XW 106P2 XW 106SP2

3 - 18

Standard panel Socket mounting set XM XSR
Removable front and rear wall Height 100 mm RAL 7005

XM 2 XM 3 XM 4 XM 5

XSR 24 XSR 34 XSR 44 XSR 54
XRG 24 XRG 34 XRG 44 XRG 54
XSR 26 XSR 36 XSR 46 XSR 56
XRG 26 XRG 36 XRG 46 XRG 56

3 - 19

Stand-alone cabinets
In addition to the flexible fast assembly system, individual extensions with all the usual profiles and mounting elements are also possible with both series of cabinets. For the special problem solutions in controller and distribution board construction, on the following pages Striebel & John offer a full installation program for both Series XA, grounded, and Series XS, double insulated. These system parts are supplemented by practical mounting accessories.
Cabinet depiction 3/8 XA6

Depth rail XZT 33

Mounting bracket ZX 221P2
Depth rail XZT 13 (profile no. 1)
Mounting bracket ZX 222P2 Width rail XZC 33 (profile no. 3) Mounting bracket ZX 222P2 Depth rail XZT 33 (profile no. 3)
Depth rail XZT 33 (profile no. 3)
Vertical rail XZV 408 (profile no. 4)
Mounting bracket ZX 221P2 Width rail XZB 13 (profile no. 1) Depth rail XZT 13 (profile no. 1) Mounting bracket ZX 221P2
Depth rail XZT 13 (profile no. 1) Width rail XZA 33 (profile no. 3)
Depth rail XZ 122 (profile no. 11)

3 - 20

3 - 21
Swing frames for installation into XA switchgear cabinets
Design A for free extension
The swivel frame allows optimum use of the cabinet depth. Using a swing frame it is possible to mount contactors, relays, terminals and other devices on two levels. The frame that can be swung out by 180 enables the devices to be mounted and wired neatly. The Design A swing frame is suitable for the installation of devices on profile rails or mounting plates up to a maximum installation depth of 180 mm. We supply Design A swing frames for Series XA, overall height 8 and 10 for 2 and 3 panels width. The unit ordered comprises: Swing frame with the vertical C profiles for fixing mounting plates, terminal rails and support rails for the devices. Top and bottom hinges, including fixing material, stop and run-up roller.
Overall width 2 (2 panels)
Type Overall height 8 Dimensions B b E
Overall width 3 (3 panels)

Type Dimensions B b E

Cabinet height (H) 1900 mm Frame height (L) 1765 mm

XE 28A

XE 38A
Overall height 10 Cabinet height (H) 2200 mm Frame height (L) 2065 mm XE 210A 434 XE 310A 684

3 - 22

Design B for 19 plug-in units for XA cabinets

Design B swing frames are intended for installation into cabinets of overall width 3 (3 panels wide) and are suitable for mounting 19 plug-in units. The lateral cover also allows the installation of plug-in units up to 450 mm deep, but only 305 mm mounting depth in the case of 400 mm deep cabinets. The plug-in units are fastened to the special C rail with self-locking sliding nuts.
The ordered unit comprises the swing frame with lateral cover, prepared for mounting 19 plug-in units. Top and bottom hinges, including fixing material, stop and run-up roller. Suitable for cabinets 400 mm or more deep.
Type Overall height 0 (600 mm) Frame height (L) 565 Height units (HE) 11 Overall height 6 (1500 mm) Frame height (L) 1465 Height units (HE) 31 Overall height 8 (1800 mm) Frame height (L) 1765 Height units (HE) 38 Overall height 10 (2100 mm) Frame height (L) 2065 Height units (HE) 44 Sliding nut Plastic, self-locking, thread in the metal. 10 ea. for fastening the 19 plug-in units XE 310 B 485 XE 38 B 485 XE 36 B 485 XE 30 B 485 Dimensions B b E
XZ 204P10 XZ 205P10 XZ 206P10
M 4 identification colour red M 5 identification colour green M 6 identification colour light brown

Dimensions

Examples of use for overall heights 8 and 10.

3 - 23

Permanent installation of 19 plug-in units -for switchgear cabinets series XA
Using the electronics mounting set, the cabinet XA can be turned into an electronics cabinet. 19 vertical profiles, support rails, brackets and covers allow implementation of many variants with plug-in units. However, this application is only possible with 600 mm wide cabinets. When incorporating heavier, deeper plug-in units or equipping the cabinet from both sides, 19 vertical profiles must be installed in the front and rear. Support rails extending over the cabinet depth can be installed for supporting the plug-in units. Standard mounting set for light plug-in units, consisting of two 19 vertical profiles XZ 189P2 or XZ 190P2 (overall height 8 and 10 respectively).

750 mm 3 panels wide Type PLE Grid spacing 1 Dimensions

ED2SHV

ED3SHV

150 x 750 mm

Horizontal device slots

ED2S00H

450 x 500 mm

ED3S00H

450 x 750 mm

ED2S0H

600 x 500 mm

ED3S0H

600 x 750 mm

ED2S1H

750 x 500 mm

ED3S1H

750 x 750 mm
Article Accessories for combination panels Panel connector for any combination of combination panels up to max. overall height 5 (9 grid spacings). 2 ea. ED 30P2 Type Article Spare parts for distribution board panels and combination panels Cover holder 52.5 mm high for attaching (insert, turn) on rails of the EDF fast assembly system and for engaging a partition. Use only this cover holder with DIN rails 35 x 15 mm. 12 ea. 40 ea. 90 degree press and turn closure 12 ea. Type

ED 38 P12 ED 38 P40

ED 50 P12
Spacer for extending the cover holder by 25 mm. 4 ea.

ED 29 P4

The combination panel simplifies storage and provides distribution board and controller constructor with many combination possibilities. Combination panels are fitted above each other using ED 30P2 in 2 or 3 panel configuration, maximum 9 grid spacings + ED 30P2 Panel connector + # Vertical device slots # Row spacing 250 mm # EDF design # for installation in wall cabinets Page # Order panel-panel connector ED30P2 in accessories # without N/PE rail 2 panels wide Combination panel
Combinations of combination panels must together have the same grid spacings as the cabinets in which they are being installed.

3 panels wide

Designation Combination panel Cable infeed
PLE Grid Dimensions sp. 150 x 500 mm

PLE Grid sp. 0 1

Vertical device slots

ED2S00V

ED3S00V

ED2S0V

ED3S0V

ED2S1V

ED3S1V
Project-related distribution board combinations for system smissline-S
Available only as a combination installed in the cabinet
Modules are available for extending Series C floor standing cabinets (grounded), Series W floor standing cabinets (grounded) and Series XA switchgear cabinets (grounded). The distribution board constructor selects from 71 smissline-S modules those modules that are relevant to his project, thereby obtaining the correct low-voltage distribution in the easiest possible way. Project-related distribution board combinations are always supplied from the factory, installed in the cabinet. The proven mounting frame WR, with its special swing-in attachment system, serves as the support frame for the individual modules. This support frame is included in the price of the modules and does not have to be ordered separately in the case of project-related distribution board combinations. Depending on the modules, the following components are installed on this frame: DIN rail for smissline-S Busbar systems from A, stepless depth adjustment U profiles for NH 00 disconnectors U profiles for NH 1 disconnectors U profiles for NH 2 disconnectors DIN rails for rows of built-in devices DIN rails for terminal blocks, adjustable depth Mounting plates, adjustable depth Touch guard cover, with or without cut-out depending on the module, made of deformation-resistant fibreglass-reinforced polyester. Cable-laying aid as an accessory

Designation Cableinfeed module

Grid spacing 1

Width 250

Width 500

Width 750

XG1S00 PLE x 250 mm

XG2S00 PLE x 500 mm

XG3S00 PLE x 750 mm

Vertical module

XG1S0 PLE x 250 mm

XG2S0 PLE x 500 mm

XG3S0 PLE x 750 mm

XG1S1 PLE x 250 mm

XG2S1 PLE x 500 mm

XG3S1 PLE x 750 mm
The PLE details for smissline-S modules is the max. number for smissline-S devices

4 - 15

XG1S PLE x 250

XG2S PLE x 500 mm

XG3S PLE x 750 mm
Modules for main power supply with copper busbar systems
# Available only as a combination installed in the cabinet
Equipment: Covers made of halogen-free, fibreglass-reinforced polyester without openings. Dimensions in accordance with DIN 43870. Covers fastened with 90 press and turn closure on cover holders, which are inserted and fixed with a quarter turn. The depth of the busbar systems is steplessly adjustable by mounting on special deep-mounting brackets.
Grid spacing Current carrying capacity 250 A Rail spacing 40 mm Cu rail cross section 20 x 5 mm Busbar holder type ZB 5 2

XGS 124

XGS 224

XGS 324

Current carrying capacity 320 A Rail spacing 40 mm Cu rail cross section 20 x 5 mm Busbar holder type ZB 5

XGS 126

XGS 226

XGS 326

Current carrying capacity 500 A Rail spacing 60 mm Cu rail cross section 20 x 10 mm Busbar holder type ZX 151

XGS 128

XGS 228

XGS 328

Current carrying capacity 630 A Rail spacing 60 mm Cu rail cross section 30 x 10 mm Busbar holder type ZX 151

XGS 129

XGS 229

XGS 329

4 - 16
Modules for NH fuse switch disconnectors Size 00 125/160A
# Available only as a combination installed in the cabinet Equipment: Covers made of halogen-free, fibreglass-reinforced polyester. Dimensions in accordance with DIN 43870. Openings for fuse switch disconnectors tailored to cover dimensions. Covers fastened with 90 press and turn closure on cover holders, which are inserted and fixed with a quarter turn. Disconnector cross member mounted directly on frame (without disconnector). Modules Width 250 Width 500 Width 750
Modules for NH fuse switch disconnectors Size 00 125/160 A, also in conjunction with snap-on installation built-in device rows in dimensions as defined in DIN 43880. Suitable for fuse switch disconnectors with screw attachment. Universal mounting on sliding rails for adapting to different fastening bore holes. Busbar systems CU rail cross section 20 x 5 Current carrying capacity 320 A Grid spacing

2 ZH 214 XGS 239 XGS 339

2 ZH 214 ZH 211 ZH 311 XGS 136 XGS 236 XGS 336
Modules for NH fuse switch disconnectors size I 250A/ size II 400A
Equipment: Covers made of halogen-free, fibreglass-reinforced polyester. Dimensions in accordance with DIN 43870. Openings for fuse switch disconnectors tailored to cover dimensions. Covers secured with 90 press and turn closure on cover holders, which are inserted and fixed with a quarter turn. Disconnector cross member mounted directly on frame (without disconnector).

4 - 21

ZH 18 ZH 18P10
System smissline-S The plug-in system for all your needs
Plug-in devices Miniature circuit-breakers Circuit breaker Residual current device (RCD) Motor protection switch All the appropriate accessories are available, from auxiliary and signal contacts to plug-in undervoltage releases for the motor protection switch.
The advantages to you Speed Major time savings during infeed and connection work thanks to the simple plug-in technology System availability Problem-free replacement of the apparatus without interrupting operation (e.g. when changing electrical consumers) Safety Direct cable assignment, resulting in fewer clamping points Flexibility Changes and additions are possible in the distribution concept without any extra work
4 - 22 The plug-in devices for the System smissline-S can be found in the following catalogue: Switching and control technology, main catalogue 2002, Part 2 The catalogue can be ordered from:
ABB STOTZ-KONTAKT GmbH Eppelheimer Str. Heidelberg Germany e-mail: desst.info@de.abb.com

4 - 23

System smissline-S Switchgear cabinets Stand-alone cabinets Wall cabinets Meter cabinets Small distribution boards Sub-circuit distribution boards

EDF fast assembly system

5 - 2 Combination-Sets
5 - 4 Distribution panels

5 - 7 TNF modules

5 - 22 Mounting parts for distribution board panels/combination set
5 - 19 Mounting parts for distribution board panels/combination set
Combination sets (without device mounting)
The combination set simplifies storage and offers many combination possibilities for the panel builder of distribution and controller boards. Combination sets 1 and 2 panels wide can be fitted above, between or below the distribution board panels. Combinations of combination sets and distribution board panels must together have the same grid spacings as the cabinets in which they are installed. When two panels are assembled one above the other, panels that are 1 panel wide must be fitted above panels that are 1 panel wide and panels that are 2 panels wide must be fitted above panels that are 2 panels wide. Busbar Single-panel / Two-panel connector Height RE Type ED 61 S ED 62 S

ED 61 S/ ED 62 S

The combinations sets ED 61 S and ED 62 S have a 5-pole busbar system, 250 A, and are plugged into the distribution board panel from above or below. By also fitting another CU bar 12 x 5 mm (per conductor) (ZX 101 or ZX 102) it is possible to extend the busbar systems to 360 A. Busbar spacing 40 mm. Busbar connection terminals can be ordered separately.

ED 71 S/ ED 72 S

The design of the combinations sets ED 71 S and ED 72 S corresponds to the previous example, but they are installed between distribution board panels. By also fitting another CU bar 12 x 5 mm (per conductor) (ZX 101 or ZX 102) it is possible to extend the busbar systems to 360 A). Busbar spacing 40 mm. Busbar connection terminals can be ordered separately.

250 mm 250 mm 500 mm 250 mm

With busbars

250 mm 500 mm

ZG71N ZG11N

Space unit ZX 69

48 1M 0

96 2M0

48 1B0

96 2B0

ZG71N ZG12N

48 1T0

96 2T0

ZG72N ZG11N

Space unit

60 1M1

120 2M1

60 1B1

120 2B1

60 1T1

120 2T1

Space unit ZX 71

V 23 K 136.51

72 1M2

144 2M2

72 1B2

144 2B2

72 1T2

144 2T2

Space unit ZX 72

84 1M3

168 2M3

84 1B3

168 2B3

84 1T3

168 2T3

Space unit ZX 73

V 43 177.42 1M4

192 2M4

96 1B4

192 2B4

ZS14N ZG12N

96 1T4

192 2T4

Space unit ZX 74

108 1M5

216 2M5

108 1B5

216 2B5

108 1T5

216 2T5

ZG72N ZS12N

Space unit ZX 75

ZG73N ZS12N

1 V 02

ZG12N ZG12N

2 V 02

ZG22N ZG22N

ZG14N ZG12N

ZG24N ZG22N

ZG73N ZG12N

ZG79N ZG22N
Device mounting on distribution board panels
Panels for modular DIN rail components Configuration: DIN rail 35 x 15 mm for device installation and with special hole grid for the wiring system. DIN rail spacing 125 mm. Covers made of halogen-free fibreglass-reinforced polyester. Openings for modular DIN-rail components DIN 43880 for 12 PLE (216 mm) per panel width.
Panels for attachable switchgear terminal blocks Configuration: DIN rail 35 x 15 mm for terminal blocks with foot attachment and with special hole grid for the wiring system. DIN rail spacing 125 mm. Covers made of halogen-free fibreglass-reinforced polyester (covers closed). Use ZK 90 P2 insulating pieces in order to fit DIN rails with double insulation. Use the extra-deep brackets ED 33 P2 in order to fit DIN rails to the rear.
Panels with mounting plates Configuration: Mounting plate made of sheet steel ST 1203 surface Sendzimir-galvanized, material thickness 2 mm. The mounting plate is mounted on extra-deep brackets and its depth is steplessly adjustable. Maximum installation depth between mounting plate and cover 143 mm (pay attention to cabinet depth). Cover made of halogen-free fibreglass-reinforced polyester (cover closed).

Current capacity 320 A Width 250 Width 500 ZH 214 ZH 211

Width 750 ZH 311

Type TXG 136 Type TXG 236 PLE 24 PLE48

2 x NH 00

6 x NH 00 Type TXG 337 PLE144
Type TXG 137 Type TXG 237 PLE 48 PLE 96

ZH 216

ZH 212

ZH 312

12 x NH 00 RE = Grid spacing

6 - 12

Available only as a combination installed in the cabinet Cover halogen-free fibreglass-reinforced plastic, material thickness 3 mm with 90 press and turn closures Module type: NH fuse switch disconnector module NH 1 Fitted with NH 1 fuse switch disconnector 250A also with busbar system with connection screws M12 TXG 142 B without busbar RE 3 Width 250 Width 500 Width 750 Type TXG 342B PLE 108
Type TXG 142B Type TXG 242B PLE 36 PLE 72
busbar 440 A Cu 30 x 5 mm Components fitted 1 x NH x NH Type TXG 143B Type TXG 243B PLE 60 PLE 120
3 x NH 1 Type TXG 343B PLE 180
busbar 630 A Cu 30 x 10 mm Components fitted 2 x NH x NH 1
6 x NH 1 Busbar systems CU busbar systems from 440 A to 630 A universally usable on the recommended disconnector types Connection screws (M12 in the case of NH1 and NH2) included. Width 500 ZH 217 CU 30 x 5 / 440 A
Module type: NH fuse switch disconnector module NH 1 Empty module prepared for NH 1 fuse switch disconnector 250 A following makes: Striebel & John, Efen, Jung, Lindner, Jean Mller, Whner RE 3 Width 250 Type TXG 142 PLE 36
Width 500 Type TXG 242 PLE 72
Width 750 Type TXG 342 PLE 108
Width 750 ZH 317 CU 30 x 5 / 440 A
1 x NH 1 Type TXG 143 PLE 60
2 x NH 1 Type TXG 243 PLE 120
3 x NH 1 Type TXG 343 PLE 180
ZH 218 CU 30 x 10 / 630 A
ZH 318 CU 30 x 10 / 630 A

4 x NH 1

6 x NH 1
Note: In a one-row arrangement, use 3 straight or 3 angled cable lugs. In a two-row arrangement use 3 angled cable lugs to connect the infeed cable. CU rail cross section 30 x 5, current capacity 440 A CU rail cross section 30 x 10, current capacity 630 A RE = Grid spacing 6 - 13
Module type: NH fuse switch disconnector module NH 2 Fitted with NH 2 fuse switch disconnector 400A with busbar system with connection screws M12 TXG 144 B without busbar RE 3 Width 250 Width 500 Width 750 Type TXG 344B PLE 108
Type TXG 144B Type TXG 244B PLE 36 PLE 72
busbar 440 A Cu 30 x 5 mm Components fitted 1 x NH x NH Type TXG 145B Type TXG 245B PLE 60 PLE 120
3 x NH 2 Type TXG 345B PLE 180
busbar 630 A Cu 30 x 10 mm Components fitted 2 x NH x NH 2
6 x NH 2 Busbar systems CU busbar systems from 440 A to 630 A universally usable on the recommended disconnector types Connection screws (M12 in the case of NH1 and NH2) included. Width 500 ZH 217 CU 30 x 5 / 440 A
Module type: NH fuse switch disconnector module NH 2 Empty module prepared for NH 2 fuse switch disconnector 400 A following makes: Striebel & John, Efen, Jung, Lindner, Jean Mller, Whner RE 3 Width 250 Width 500 Width 750 Type TXG 344 PLE 108

 

Tags

SDM-S204E IS-10 Urc-8811 240V Robot Cafe Color 777I P2450H DCR-PC100 GR-M492YLY DPP-MS300E Vice City Philips FW56 Presario A900 CDX-S22 MDS713-A5U SPH-M810 Corsa 231-25 LN32C530 Aspire 5630 EL-S752K 240 Blue HT762PZ-d0 I 60 AX-V55bk-ax-v55 PEG-UX50 CE100V-W ER3313B Wusb54GC MW73E Cantibmlp Controlpad Syncmaster T220 Nokia 3200 HVL-ML20M Netshell RA-870 SE505 RZ-BA10 Microtower PC XVS650A-2005 D14427DZ Review FW-C780 MX46533GN FRS 235 Gmrs1202CH BOY 80 CDM7075 Scpt480 SHV99A13UC Speedtouch 570 SC-D354M Nokia X6 - E90 Hblg8004R DPP-FP55 Poster 150SX TX-SR600E Strk502P GR-82 Setup DTH 250E DVR90VE WM16S794GB IX7000 KV-36DZ900 Machine 605 GPS AW-SW350 XLT800-2002 Chaise HP 49G LG KS20 Casio 3053 VLT 8184 Trilogy STR-DH510 Server A880G Plus M2NPV-MX 29FU1RLX DP-990 GSA-H20L FAX-L280 YP-S2QB XS-LD125p5 Cyclecomputing Z3 Generation Kenwood A930 TX-900 DVP5965K LH-T6000 MFC-440CN Speedtouch 605S Elite DJ-S1E Gr-d72 LD-14AW1 S4115HII

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101