Alcatel-Lucent IP Touch DoorCam

User Guide

May 2007
Alcatel-Lucent Services for Enterprise All Rights Reserved Alcatel-Lucent 2007

TABLE OF CONTENTS

TABLE OF CONTENTS...Introduction....Features....Operations....Architecture....5 4.1 MWS Intercom:....5 4.2 Castel Intercom :...Use cases:.....How does it works ?...Requirements and conditions...Application partners.... 10
Alcatel-Lucent Ref.: 8AL020043217DRARA All Rights Reserved Alcatel-Lucent 2007

Page 2

1 Introduction
The main scope of this document is to describe the Alcatel-Lucent IP Touch DoorCam XML application, based on Xml IP Touch integration. This easy-to-install application brings DoorCam facilities for one or several doors to any Alcatel Lucent IP Touch 4068 phone set and door activation with a single key. IP Cameras and intercoms are installed at the entrance areas to be controlled by the system,; and electrical locks can be added to the doors to allow remote opening. The Alcatel Lucent 8 SERIES terminals handle the calls from the intercoms and display images from the cameras. Using telephony features, the video door phone (DoorCam) service helps keep costs down and improves Customer Welcome. It also provides an effective method to forward the facility during absence or night time.

2 Features

n n n n
Display of the image from the camera(s) located at the door(s) or anywhere else The IP Touch DoorCam can be opened from any video door phone application. The IP Touch DoorCam can be used to select camera(s) independently from telephony. This solution can be deployed on a Windows server. Page 3
Application enabled for any IP Touch 4068 (8 SERIES) phone set of a network (regardless of network size) n The solution is available in five languages: English, French, German, Spanish and Italian.

3 Operations

When a visitor arrives at an entrance area where an intercom and a Lancam are installed, he can make a call by using the intercom. Once the call is initiated, one or more Alcatel-Lucent IP Touch 4068 phone sets with Door Cam XML application ring. When an Alcatel-Lucent IP Touch 4068 phone set with DoorCam option connects to the intercom call, the image from the LAN camera is displayed on the screen. While connected, it is possible to open the door by pressing a key on the set (F1). The user will be able to acce the LanCam images, independently of an ongoing call, by entering ss directly into the application enabled on the phone set.
Graphical interface is provided as an example (not finalized)

Page 4

4 Architecture
The DoorCam application is designed to inter-work with two types of intercoms:

4.1 MWS Intercom:

The intercoms manufactured by MWS are fully compatible with Alcatel Lucent 4034 digital sets. As a consequence, each MWS intercom has to be declared in the Alcatel-Lucent OmniPCX Enterprise as a regular IP Touch 4034 set. However, some specific configuration must still be done on the Alcatel-Lucent OmniPCX Enterprise in order to configure the intercom. Moreover, it is possible to convert it into an IP Phone using a 4098 plugware. In this case, the set must be declared in the Alcatel-Lucent OmniPCX Enterprise as an IP Touch 4037 set; the configuration of the pkeys and directory keys remains unchanged.

Page 5

UA port

MWS intercom

Without 4098 plugware

4.2 Castel Intercom:

With 4098 plugware

Castel provides intercoms that can be interconnected to an Alcatel-Lucent OmniPCX Enterprise via a specific adaptor, called IPS2. This adaptor provides the possibility to command electrical locks, as well as to configure the way the intercoms attached to it operate. This configuration is programmed sending DTMF tones to the adaptor and is stored in its internal memory. The following illustration shows the way the IPS adaptor interconnects Castel intercoms to an OXE:

Intercom 1 Analog port

Intercom 2

To Power supply 230V

Note that the two intercoms are seen by the OmniPCX Enterprise as a unique regular analog set; indeed, it is the IPS2 which plays the role of the analog set. The management to be carried out in theOmniPCX Enterprise is to add an Analogtype set, with no particular characteristics.

Page 6

5 Use cases:
User A receives a call on the intercom. While the phone is ringing, images from the video camera associated to the intercom are displayed automatically- on the set screen. User A picks up the call and starts talking with the person asking to enter t office. User A he prevents entry and hangs up. While hanging up, the display window is closed. User A receives a call on the intercom. While the phone is ringing, images from the video camera associated to the intercom are displayed automatically on the set screen. User A picks up the call and starts talking with the person asking to enter the office. User A authorizes entry and opens the door by pressing the F1 key on the set. User A is informed of an intrusion in the office premises. By entering the DoorCam application through his phone set, a pop up window displays the images of the selected Lancam to check the information.

Page 7

6 How does it work?
As illustrated, the Alcatel-Lucent OmniPCX Enterprise IP Touch DoorCam software is directly interfaced with two elements: It is connected to the IP Lancam, from which images are transmitted For the interaction with the sets, the software is connected with the Alcatel Lucent Xml API Framework; this connection allows the two main features of the solution to perform: o The real time display of the image on the screens of the Alcatel-Lucent IP Touch sets

The generation of pop-up dialog boxes on the Alcatel-Lucent IP Touch sets when communication with intercoms are established; this feature, also referred to as CTI in this document, is available in Alcatel-Lucent IP Touch DoorCam provided that the Xml API Framework allows it.

Page 8

7 Requirements and conditions
Alcatel-Lucent IP Touch DoorCam Release 1.0 Application Microsoft Windows 2000 Operating systems Microsoft Windows 2003 SP1 Alcatel-Lucent OmniPCX From release 6.2 Enterprise version Supported sets IP Touch 4068 set Release 3.0 Requires DCAM license. Requires XML IP Touch Extended 10 ext. pack (depending on the total amount of intercoms) or XML IP Touch Basic 10 ext. pack + XML MyPhone licenses MyPhone XML Web Service Installation and Deployment (if needed) 1.1 or 1.2 (Only with IP Touch Interface) J2RE 1.4.2 Tomcat 5.0 http camera UA Gatekeeper CAP2B + IPS2 adaptor
Alcatel-Lucent XML API Framework
Presentation Server (PRS) Java version Application Server Camera MWS intercom Castel intercom

Page 9

8 Application partners
The Alcatel-Lucent IP Touch DoorCam works with Axis IP network cameras. For more information on Axis products please contact an Axis equipment distributor or Axis directly:
Head Office Lund Axis Communications AB Emdalavgen 14 SE-Lund, Sweden http://www.axis.com
The Alcatel-Lucent IP Touch DoorCam can operate with MWS intercoms (UA protocol or SIP) MWS ESPACE CARROS - 1re avenue - BP CARROS Cedex Tel : +33(0)13 Fax : +33(0)19 info@mws.fr http://www.mws.fr

n n Castels

CAP2B analog intercoms can also be used with the IPS2 adaptor; please refer to Castel for more information on their products: Castel Z.I. de Saint-Lambert des Leves 49412 Saumur Cedex Tel : +33(0)40 yolaine.chaussepied@castel.fr http://www.castel.fr/
Legal notice Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel- Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright 2007 Alcatel-Lucent. All rights reserved

Page 10

www.alcatel-lucent.com

Page 11

Alcatel TAPI Premium Server
Link your PC network with the Alcatel OmniPCX Enterprise Compatible with TAPI applications Client/server architecture reduces support, maintenance, and hardware costs Easily integrated into any network topology Toolkit for developing CTI applications Partner Program for ISVs and developers.
Main features TAPI client/server TSP. Compatible with TAPI 2.1- and 3.0-compliant applications Adds telephone service capabilities to standard Windows applications. Development and integration basis for CTI applications. SDK available providing access to unique Alcatel OmniPCX Enterprise telephony features.
Direct access to telephony services The Alcatel TAPI1 Premium Server is a TAPI compatible TSP. It allows TAPI applications
Designed for Alcatel OmniPCX Enterprise system with ReflexesTM phone sets. Simplified installation, administration, and integration for any network topology. Direct CSTA mapping. Linking existing CTI applications Compatible with client/server or desktop-only TAPI applications, providing for example: telephony, messaging, voice response, directory, direct marketing, and workgroup functions. Compatible with non-TAPI standard Windows applications using the assisted telephony function. Examples of compatible applications: PhoneMax, Phonetastic, Maximiser, Sidekick, Goldmine, Act!, SAP R/3, Microsofts Outlook, Access, Word, Schedule+ and Excel, Lotus Notes, Herold, and Twixtel.
to access the telephony services of the Alcatel OmniPCX Enterprise system. Its client/server architecture, ability to support a wide range of telephone sets, and compatibility with all network architectures, fulfill, at a low cost, all CTI3 needs. A software development kit (SDK) is available through the Alcatel Application Partner Program for building or adapting applications that take full advantage of the Alcatel OmniPCX Enterprise telephony features.
Access to advanced telephony features Calling line identification presentation gives you the callers number, so you can instantly have the relevant data on screen. Access to telephone services, such as incoming and outgoing call management, call transfer, conference calls, and touch-tone dialing code sending. Unique Alcatel features through extended TAPI services, for example: PCX directory, phone set management, private/business calls, supervision, and remote forwarding. Compatible with any network topology Access to the Alcatel OmniPCX Enterprise telephony server function via the TAPI Remote Service Provider using Windows. Non client/server applications can also access all of the telephony services. Client/server architecture. Minimum system requirements Alcatel OmniPCX 4400R3 or higher and Alcatel OmniPCX Enterprise. Telephone sets: - Alcatel ReflexesTM range (Advanced, Premium, Easy, First and Alcatel 4034, 4023, 4012, 4003) and the e-ReflexesTM IP phone range (Advanced, Premium and Easy).

System architecture

Alcatel OmniPCX Enterprise Client/server application Alcatel TAPI Premium Server

LAN TCP/IP

Client application
- DECT handsets: Alcatel Mobile ReflexesTM (100, 200, 200 Ex, and Alcatel 40XX). - PWT handset: Alcatel 4073. - or analog sets. Server: PC compatible, minimum configuration: Pentium III 500 Mhz, 128 Mb RAM, CD-ROM Drive, LAN card, Windows 2000 server, IRC remote-maintenance software and modem. Client: PC compatible, minimum configuration: 64 Mb RAM, Windows 95, 98, NT 4.0, NT WS, 2000 or XP.

Software architecture

Client Client Mgt 16- or 32-bit TAPI application TAPI Services 16-bit TAPI application TAPI.DDL TAPI Services TAPI Remote SP CLIENT
Alcatel OmniPCX Enterprise

32-bit TAPI application

Alcatel TAPI Premium Server Service Provider & PCX Driver CSTA PCX CMIP SERVER

s TAPI applications s TAPI interfaces s Alcatel TAPI Premium Server
TAPI: Telephone Application Programming Interface TSP: Telephony Service Provider CTI: Computer Telephony Integration
4276325 - 05/03 - Alcatel Business Systems 32, av. Klber 92707 Colombes Cedex France - Tel.: +33 (0) 00. RCS Paris B 185 - This document does not constitute a contract. The functions mentioned are country-specific and availability depends on the public network to which systems are connected. Alcatel reserves the right to modify characteristics without notice, in order to conform with new standards or to improve product performance. All trademarks are the property of their respective companies - Photos: M. Langot - Printed in ECC on chlorine-free paper.

(23284) KRPLUS CRATION