Alcatel-Lucent 7210 SAS-E
S ervice A ccess S witch | R elease 1. 0
Purpose-built to enable cost-effective and highly scalable Carrier Ethernet services delivery, the Alcatel-Lucent 7210 SAS-E is a customer edge device designed to address the metro Ethernet, managed wide area network (WAN) services and service aggregation markets. Leveraging the powerful Alcatel-Lucent Service Router Operating System (SR OS) and the Alcatel-Lucent 5620 Service Aware Manager (SAM), the 7210 SAS-E extends managed Carrier Ethernet VPN services to the customer edge and extends the reach ofthe Carrier Ethernet aggregation network.
The Alcatel-Lucent 7210 Service Access Switch (SAS) is a family of nextgeneration, small footprint, Carrier Ethernet customer edge devices. As a member of the industry leading Carrier Ethernet product portfolio, the Alcatel-Lucent 7210 SAS-E optimizes the business case for providing innovative Ethernet services to multiple locations, enables the cost-effective addition of new sites to a Carrier Ethernet virtual private network (VPN), and delivers multiple services per port. Powered by the industry-leading SR OS and managed by the Alcatel-Lucent 5620 Service Aware Manager (SAM), the Alcatel-Lucent 7210 SAS-E empowers service providers with the ability to innovate anddifferentiate their retail and wholesale Carrier Ethernet VPN service portfolio. These services include Virtual Private Line Service (VPLS) a multipoint Carrier Ethernet VPN (also referred to as E-LAN Carrier Ethernet service by the MEF), Virtual Leased Line (VLL) a point-to-point Carrier Ethernet VPN (also referred to as E-Line Carrier Ethernet service by the MEF) along with Ethernet access
to enhanced Internet services (IES) and IP VPN services. With SR OS deployed end-to-end, the 7210 SAS-E extends service level agreements (SLAs) of more enhanced services to the customer edge. The Alcatel-Lucent 5620 SAM simplifies the end-to-end service management of the Ethernet services by expediting initial time to market forservice provisioning, as well as on-going moves, adds and changes asthe service requirements evolve forthe subscribers. When networked with the Service Router portfolio, the Alcatel-Lucent 7210 SAS-E provides seamless access to application-aware VPN services, which use protocol signatures to guarantee application performance within data flows for further service differentiation. The 7210 SAS-E can also be deployed as a cost-effective aggregation device to extend the reach of the Carrier Ethernet aggregation network to smaller sites. The Alcatel-Lucent 7210 SAS-E is Metro Ethernet Forum (MEF) 9 and MEF 14 certified, supporting SR OS with
per-service QoS and operations, administration and maintenance (OAM) toolkit. The 7210 SAS-E is a wire speed non-blocking platform delivering 12 x 100/1000 optical SFP and 12 x 10/100/1000BASE-T copper ports. It can support 10/100/1000BASE-T copper and coarse wave division multiplexing (CWDM) SFPs for added configuration flexibility. With configuration flexibility and support for dual-homed uplinks, the 7210 SAS-E is ideal for use in single-tenant locations and multi-tenant offices, as well as campus environments. Service providers such as telephone companies, competitive carriers and multiservice operators (MSOs) can leverage the Alcatel-Lucent 7210 SAS-E to extend Carrier Ethernet services to a subscribers location. The per-service capabilities of the 7210 SAS-E enable the service provider to deliver a suite of differentiated service-aware VPNs to enterprise with guaranteed QoS perapplication within a single SLA managed end-to-end. Using Multichassis link aggregation (MC-LAG), the 7210 SAS-E extends the service reliability of a carriers service portfolio. In addition, per-service OAM ensures consistent end-to-end rapid troubleshooting. For operational efficiency with streamlined management and effective service assurance, the Alcatel-Lucent 7210 SAS-E is fully managed by the 5620 SAM, giving the operator a comprehensive, easy-to-use fault management system, a full suite of OAM tests for SLA compliance, simplified service provisioning with GUI-based templates, and threshold crossing alerts to identify issues before they affect customers. The OSS Connected Partner program offers certified integration with industryleading OSS applications, including service assurance, provisioning and traffic engineering. For industry and public sector customers who install and manage their own private networks, the Alcatel-Lucent 7210 SAS-E increases the services
that they can provide to their internal customers while reducing operating costs. Information and Communication Technology (ICT) directors whomanage such networks can cost-effectively deliver advanced voice, video and data services, reduce network complexity and leased line costs through a single metro/WAN uplink, and provide easy servicedelivery with quick moves and changes to services along with seamless inte ration with Carrier Ethernet/MPLS g aggregation and core IP/MPLS networks from Alcatel-Lucent. With its lower power consumption, the 7210 SAS-E is designed to be environmentally friendly by helping operators meet their energy efficiency and environmental goals.

Benefits

Increase revenue with a full suite of enhanced Carrier Ethernet VPN services delivered to the customer edge Reduce the cost of customer acquisition with common OS and seamless service extension capabilities with the 7450 ESS, 7750 SR and 7710 SR Simplify enterprise networking complexity by supporting a full suite of demanding enterprise applications over a single Ethernet connection Extend SR OS to the customer edge to support VPLS (E-LAN), VLL (E-Line), and Ethernet access to IES and IP VPN services Cost-effectively extend the reach of the Carrier Ethernet aggregation network into smaller sites or closer to the end user Deliver operational efficiency with streamlined management and service assurance that tightly integrates the 5620 SAM and the extensive OAM tool kit for rapid troubleshooting and expediting initial time to market for service activation with quick moves, adds and changes for end-to-end managed service delivery Provide a cost-effective Ethernet demarcation device for retail or wholesale services to single or multiple customers Provide scaling and differentiation advantages with seamless service extension capabilities with 7450 ESS, 7750 SR and 7710 SR solutions, including application-aware VPNs Increase revenue opportunities and service reliability with enhanced SLAs to proactively monitor the status of co-located customer premise equipment, such as door actions or battery alarms, and generate alarms in real time using four opto-isolated inputs and two dry relay contact outputs

Features

Wire speed, non-blocking, serviceaware Ethernet switch 12 x 100/1000 optical SFP ports and 12 x 10/100/1000BASE-T copper ports Support for a wide range of pluggable SFP optics including 1000BASE-T copper and CWDM SFPs for greater flexibility Powered by SR OS for feature-rich Carrier Ethernet VPN services Per-service quality of service (QoS) with up to eight levels of classbased queuing per port Per-service OAM toolkit with IEEE 802.1ag, IEEE 802.3ah and local service mirroring Ethernet features include IEEE 802.1Q and QinQ (stacked VLAN IDs) Dual-homed connections with uplinks to separate aggregation devices MEF 9 and MEF 14 certified platform Network Equipment Building System (NEBS) 3 certified platform Managed by the 5620 SAM Provides four opto-isolated inputs and two dry relay contact alarm outputs through a DB-15 interface on the front panel Hot-swappable, redundant, load-sharing AC or DC power and hot-swappable fan modules

Alcatel-Lucent 7210 SAS-E | Release 1.0 | Data Sheet

Technical specifications

Physical interfaces
12 x 100/1000 SFP ports 12 x 10/100/1000BASE-T ports Support for a wide range of pluggable SFP optics including 10/100/1000BASE-T copper SFPs and CWDM SFPs Four opto-isolated inputs and two dry relay contact outputs through a DB-15 interface on the front panel One expansion slot (for future use) One Ethernet out of band management port One management console port

Performance

Full wire-speed switching Throughput (half-duplex): 48 Gb/s MAC Address table size: 10 K Jumbo frame size: 9 K bytes
Ethernet service delivery
Layer 2 VLL and VPLS service delivery MEF defined E-Line (Ethernet private line [EPL] and Ethernet Virtual Private Line [EVPL]) and E-LAN service delivery MAC limiting (per service and per SAP) Ability to disable MAC learning Ability to add MAC statically Ability to discard unknown MAC Encapsulations: null/dot1q on access ports QinQ on uplink ports Spanning Tree Protocol on access and uplinks IEEE 802.1d Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) Management VPLS (mVPLS) with RSTP Tunneling Layer 2 control protocols (L2PT) Bridged Protocol Data Unit (BPDU) translation Port-based split horizon group (SHG) Internet Group Management Protocol (IGMP) snooping IPv6 bridging
Egress re-marking (IEEE 802.1p) Traffic rate limiting/policing on service ingress and Layer 2 uplink/network ingress SrTCM (single rate three color marker) TrTCM (two rate three color marker) Color-aware meter on Layer 2 uplink/network ingress Unknown unicast, broadcast and multicast packets can be rate-limited independently Simple Random Early Detection (SRED) Eight traffic classes (forwarding classes) Eight queues per port Scheduling (RR, WDRR, WRR, Strict Priority, Hybrid) Access control lists Layer 2 Criteria (Ethertype, SRC/DST MAC, L2 protocols, dot1p) Layer 3 criteria (IP SRC/DST, DSCP) Layer 4 to Layer 7 criteria (TCP/UDP port, for applications like FTP, Telnet) Statistics Ingress, per meter (per SAP per FC) Statistics bytes or packets Collect and store billing statistics to accounting file
Service mirroring Local mirroring Port mirroring (ingress and egress) Support the following ingress mirror sources: - SAP - Filter Mirror Destination - Null SAP ICMPv4 (ping and traceroute) Accounting policy support Event and Logging support as in SR OS Time-of-day support for implementing policies Support for cron as in SR OS Auto configuration to retrieve configuration and image file from network Remote upgrade of SR OS software
Mechanical specifications

Dimensions

Height: 67 mm (2.64 in.) 1.5RU Width: 436 mm (17.17 in.) Depth: 253 mm (9.96 in.)

Weight

5 kg (11 lbs)

LED indicators

System Power Supply Port Status Fans Alarms

Power requirements

Network management
Alcatel-Lucent 5620 Service Aware Manager (SAM) Fault management Configuration management Service creation and subscriber management Performance management Security management Mediation for OSS applications OSS Certified Partner program Custom Service Portal Static routing for management In-band Management Telnet SNMP v1/v2c/v3 NTP SSHv2/v1 RMON FTP TFTP SCP (Secure Copy using SSHv2 protocol) Syslog DHCP Client (used only for autoconfig)

Redundant, hot-swappable power supplies AC Input: 100~240 V, 50~60 Hz, Output: +12 V DC DC Input: -36 V DC to -72 V DC, Output: +12 V DC Power Consumption: 50 W (typical), 171 BTUs per hour
Environmental specifications
IEC 68-2-14 Standard operating temperature: 0C to 50C (32F to 122F) Non-operating temperature: -10C to +50C (14F to 122F)

Saftety

CSA/NRTL (UL60950, CSA 22.2.No 60950-00) TUV/GS (EN60950) CB

High availability

Dual-homing using STP or MC-LAG IEEE 802.3ad LAG on network ports IEEE 802.3ad LAG on access ports and L2 uplink ports LACP enhancements for active/ standby LAG operation (for use with PE device that implements MC-LAG) Modular SR OS Hot-swappable, redundant, load sharing AC or DC power Hot-swappable fan module containing three fans. Device continues operation if one fails (raising simultaneous alarm)
Electronic magnetic compatibility
CE Mark FCC Class A VCCI Class A

Certifications

NEBS Level 3 certified Telcordia GR-1089 CORE, Issue 4, June 2006 Telcordia GR-63 CORE, Issue 3, March 2006 ATT-TP-76200 CE
IEEE 802.3ah EFM OAM including dying gasp on Layer 2 uplink/ network ports IEEE 802.1ag CFM OAM (support down maintenance entry points [MEPs]/maintenance intermediate points [MIPs]) Service assurance agent (SAA) for management: Two-way measurements (RFC 2544 based) Software-based time stamps

Security

IEEE 802.1x on access ports Control plane security CPU DoS Protection Management access filters Radius Client TACACS+ User profile management as in SR OS

Standards compliance

IEEE 802.1d Bridging IEEE 802.1p/q VLAN Tagging IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1x Port Based Network Access Control IEEE 802.1ad Provider Bridges IEEE 802.1ag Service Layer OAM
Advanced Quality of Service
MEF 9 and MEF 14 certified Packet classification based on Layer 2 criteria (MAC, Ethertype, IEEE 802.1p) Packet classification based on IP criteria DSCP Egress port rate limiting
IEEE 802.3ah Ethernet in the First Mile IEEE 802.3 10BASE-T IEEE 802.3ad Link Aggregation IEEE 802.3ah Ethernet OAM IEEE 802.3u 100BASE-TX IEEE 802.3z 1000BASE-SX/LX
RFC 1519 CIDR RFC 1812 Requirements for IPv4 Routers RFC 2347 TFTP Option Extension RFC 2328 TFTP Blocksize Option RFC 2349 TFTP Timeout Interval and Transfer Size option

Radius

Report Management Function M.3100/3120 Equipment and Connection Models TMF 509/613 Network Connectivity Model RFC 1157 SNMPv1 RFC 1215 A Convention for Defining Traps for use with the SNMP
Standard MIB support includes:

Protocol support

Differentiated Services
RFC 2474 Definition of the DS Field in the IPv4 and IPv6 Headers (Rev) RFC 2597 Assured Forwarding PHB Group (Rev3260) RFC 2598 An Expedited Forwarding PHB RFC 2697 A Single Rate Three Color Marker RFC 2698 A Two Rate Three Color Marker

Multicast

RFC 2865 Remote Authentication Dial In User Service RFC 2866 RADIUS Accounting

IGMP RFC 2236

TCP/IP
draft-ietf-secsh-architecture.txt SSH Protocol Architecture draft-ietf-secsh-userauth.txt SSH Authentication Protocol draft-ietf-secsh-transport.txt SSH Transport Layer Protocol draft-ietf-secsh-connection.txt SSH Connection Protocol draft-ietf-secsh-newmodes.txt SSH Transport Layer Encryption Modes

TACACS+

RFC 768 UDP RFC 791 IP RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 854 Telnet RFC 1350 The TFTP Protocol (Rev)
draft-grant-tacacs-02.txt
ITU-T X.721: Information technologyOSI-Structure of Management Information ITU-T X.734: Information technologyOSI-Systems Management: Event
RFC 1907 SNMPv2-MIB RFC 2011 IP-MIB RFC 2012 TCP-MIB RFC 2013 UDP-MIB RFC 2096 IP-FORWARD-MIB RFC 2138 RADIUS RFC 2575 SNMP-VIEW-BASEDACMMIB RFC 2576 SNMP-COMMUNITY-MIB RFC 2665 EtherLike-MIB RFC 2819 RMON-MIB RFC 2863 IF-MIB RFC 2864 INVERTED-STACK-MIB RFC 3014 NOTIFICATION-LOG-MIB RFC 3164 Syslog RFC 3273 HCRMON-MIB RFC 3411 An Architecture for Describing Simple Network Management Protocol (SNMP)
Management Frameworks RFC 3412 Message Processing and Dispatching for the Simple Network Management Protocol (SNMP) RFC 3413 Simple Network Management Protocol (SNMP) Applications RFC 3414 User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3) RFC 3418 SNMP MIB draft-ietf-disman-alarm-mib-04.txt IANA-IFType-MIB IEEE8023-LAG-MIB Plus support for an extensive array of proprietary MIBs
Table 1. Ordering information
Ordering Code Item Name Description

3HE04410AA

7210 SAS-E12F12T AC Version
7210 SAS-E chassis with 12 x 100/1000 optical SFP and 12 x 10/100/1000BASE-T copper ports, 4 opto-isolated inputs and 2 dry relay contact outputs through a DB-15 interface on the front panel, 1 empty slot for future use, 1 fan tray, 1 AC power supply, 1 power chord and Release 1.0 operating system software A second power supply must be installed for redundancy Optical ports require SFPs and must be ordered separately

3HE04410AB

7210 SAS-E12F12T DC Version
7210 SAS-E chassis with 12 x 100/1000 optical SFP and 12 x 10/100/1000BASE-T copper ports, 4 opto-isolated inputs and 2 dry relay contact outputs through a DB-15 interface on the front panel, 1 empty slot for future use, 1 fan tray, 1 DC power supply and Release 1.0 operating system software A second power supply must be installed for redundancy Optical ports require SFPs and must be ordered separately

3HE04412AA 3HE04415AA 3HE04414AA 3HE04416AA
7210 SAS-E12F12T OS V1.0 -48V DC Power Supply 110-220V AC Power Supply Fan Tray
7210 SAS-E operating system software for R1.0 software upgrades -48 V DC power supply (one is required; a second is required for optional redundancy) 110 V to 220 V AC power supply (one is required; a second is required for optional redundancy) Fan tray for all 7210 SAS chassis variants

www.alcatel-lucent.com

Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright 2009 Alcatel-Lucent. All rights reserved. CPG2896090273 (07)