Alinco DJ-196 Manual
Here you can find all about Alinco DJ-196 like manual and other informations. For example: .
Alinco DJ-196 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Alinco DJ-196 please write about it to help other people. [ Report abuse or wrong photo | Share your Alinco DJ-196 photo ]
0905052021 50 100MHz Ky
User reviews and opinions
|beata||8:21am on Sunday, October 10th, 2010|
|see review see review Fears and Mis-Beliefs The realization of needing to move to the world of LCD was a scary to me.|
|jbkowalski||7:42am on Sunday, October 3rd, 2010|
|"We bought 2 of these a few months ago and we love them! Image is very clear, easy to adjust, works great for spreadsheets, documents, graphics.|
|ginocchio||8:12pm on Saturday, October 2nd, 2010|
|Looks good and very easy to set up. Sound is quite tinny but that is to be expected for a TV of this size.|
|dmiller||2:57pm on Monday, August 16th, 2010|
|"Am very happy with this except the speakers not working but that can be fixed. Monitor size amazed me.|
|panos||2:39am on Friday, June 18th, 2010|
|No Warranty This worked for a couple of months, then became so noisy you could not remain in the same room with it.|
|dubis||8:26am on Monday, May 24th, 2010|
|"We went to the Best Buy in Auburn, Alabama because it was the closest store that listed having this monitor in stock. But getting there. "overall I was very pleased with this purchase.Good price,great picture quality,easy hookup.I was disappointed with the sound performance.|
|ivocp||6:09pm on Monday, April 19th, 2010|
|A Top Shelf Monitor for a Low Shelf Price I purchased this monitor while in the process of building a new computer. GREAT RESOLUTION, EVEN BETTER PRICE Purchased this for office use and it looked as good as the name brand monitors we bought in the past. Hanns G computer didplay I think the display is excellent. Colors are bright and sharp. Setup was very easy. But.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
PROGRAMING THE ALINCO DJ-196
Press the A V/MMW key so M does not show in the radios display. This is the VFO mode. Key in the desired receive frequency. Press the FUNCSET key, and push the 2 SHIFT key until the desired offset or no offset for simplex is displayed. Push any key other than the 2 SHIFT or the FUNCSET key to return to the VFO mode. To enable the PL tone function, push the FUNCSET key and then the 4 TSQ key. Continue pushing the 4 TSQ key until the desired tone function is shown (normally just a T). When the desired function is shown, rotate the knob for the correct frequency. Push any key other than the 4 TSQ or the FUNCSET key to return to the VFO mode. To save the desired information to a memory channel, press the A V/MMW key and the memory channels appear. Rotate the knob until you find a channel that displays a flashing M. To place the information in that channel, press the A V/MMW key again. Press the FUNCSET key and then the A V/MMW key while the F appears in the display (within about 3 seconds). This places the information in the selected memory channel. Pushing the A V/MMW key displays the memory function and you can rotate the knob to show the previously set memory channels. If you want to delete a memory channel so you can place different information in that channel, push the A V/MMW key to enter the memory mode. Rotate the dial to select the memory channel you wish to delete. (M is displayed for channels that are being used, and the M flashes for channels that are unused). Press the FUNCSET key, and while the F is displayed, press the A V/MMW key. The M will begin flashing to indicate the channel is now unused.
REAR VIEW OF FRONT PANEL / -----/ VOLUME / CONTROL / / / -----/ O O O * O |<-SOLDER BRIDGE * O * O 12 PIN IC -> O O * O |<-SOLDER BRIDGE * O / /--------/ / VFO CONTROL / --------/ /
* DO NOT SOLDER THE TOP PAD |< O OF THESE 3 PADS * SOLDER BRIDGE HERE
9. RE-assemble radio. 10. Reset microprocessor. Good luck and happy moding 73 Carl VE3ZCO@VE3GYQ
This modification is read 656 times.
(DJ-100) Adjustment points for DJ-100T
1. Transmitting Unit Item 1. Frequency adjustment Adjustment Point CV301 (Main PCB) Adjustment Method Set the unit in the transmission mode at 144.03 MHz and adjust CV301. (Transceiver tester, counter) Input a signal of 1 KHz/50mV into the SP/MIC jack and adjust VR303 so that you obtain 4.7 KHz/DEV in the transmission mode. Set the subaudible tone to 114.8 Hz by DIP Switch and adjust VR401 so that you obtain 800 Hz/Dev. Spec 144.03 MHz 50 Hz
2. Modulation degree adjustment
VR303 (Main PCB)
4.7 KHz 0.2 KHz
3. Subaudible tone
VR401 (RF unit)
800 Hz 50Hz
VR601 (DTMF Unit) Puch  in the transmission mode and adjust VR601 so that you obtain 3 KHz/DEV.
3 KHz 500 Hz
2. Receiving Unit Item 1. VCO P/D voltage adjustment 2. RF amp Adjustment Point L502 (VCO) Adjustment Method Adjust L502 so that P/D voltage is 0,5 V at 144.03 MHz. (DC voltmeter) Spec 0.5 V 0.1 V -2 dB Max.
L405, 406, 407 & KHz, 3.5 KHz/Dev. - 6 dB (RF PCB) (Meter directreading). 145.03 MHz, audio output 50 mV/8ohm (Transceiver tester) Adjust L405, 406, 407 & 408 so that SINAD sensitivity becomes maximum. VR301 (Main PCB)
3. Squelch Sensitivity
1 KHz, 3.5 KHz/Dev, -8 dB -8 dB (Meter directreading), 145.02 MHz 1 (Transceiver tester). Turn VR301 counterclockwise from closed conditions and set to a point where the squelch is open.
4. S-meter adjustment
VR302 (Main PCB)
1 KHz, 3.5 KHz/Dev, +17 dB (Meter directreading). Turn VR302 so that [FULL]-bar begins to light.
This modification is read 497 times.
(DJ-120) Extended frequency for Alinco DJ-120
Hi all, i have recently heard of a mod for the alinco dj-120. The mod opens up transmit from 130 mhz to 174 MHz. To do this, please folow these simple procedures: 1. Open the front and top case of the ht. 2. Look for 2 jumpers, one vertical, on horizontal next to the microprocessor and cut both of them. 3. Reset the microprocessor by pressing the reset button on front panel. Be careful! that will reset all memories stored in the radio
transmission, it will release the squelch and the receive the rest of that transmission. Transmit Mode: When used to transmit, the radio will automatically transmit the three digit DSQ group code right after you press the [PTT] button, so remember to pause a moment before talking if using the radio in DSQ mode. To set DSQ Squelch, push [f] [GP DSQ] until DSQ is displayed. Be sure that ONLY DSQ is displayed, not G DSQ or GP DSQ. Normally, if you start with no DSQ display, hitting [f] [GP DSQ] once will cause DSQ only to be displayed. Summary of DTMF Squelch function: Receive: Radio remains squelched unless it receives the tones 1,2,3 Transmit: Radio transmits the tones 1,2,3 whenever [PTT] is pressed. (you must hold down the PTT button throughout your transmission. If you let go of the PTT button, you must re-transmit the three digit code if you want the receiver to hear you! This is not a problem when using one DJ160 with another, but can be if you are using the DJ160 with a different radio where manual entry of the DTMF tones is required) NOTE: If using another radio to manually send DTMF squelch codes, the three digits must be punched in within a space of 1.5 seconds total. (b) DTMF page function: This mode is set using the [f] [GP DSQ] buttons. Hold down the [f] button and press the [GP DSQ] button until G DSQ or GP DSQ is displayed. G DSQ stands for group page mode, and GP DSQ stands for personal page mode. Normally if no DSQ function is displayed, you hold down the [f] key and press the [GP DSQ] key once to display DSQ, twice to display G DSQ, three times to display GP DSQ, and a fourth time to clear the DSQ function from the display. Receive Mode: In this mode, the radio is silent until it receives the proper page tone sequence. At that point, it will beep in a fashion that is characteristic of either receipt of a group page or of a personal page. The tone for a group page consists of several dual beeps, with all beeps being of the SAME tone. eg: beep beep beep beep beep beep etc. The tone for a personal page consists of several dual beeps, but the two beeps within each dual beep are of different frequencies. eg: beep boop beep boop beep boop etc. NOTE: The radio behaves EXACTLY the SAME when in either G DSQ or GP DSQ modes when it is RECEIVING. The two modes (G DSQ and GP DSQ) differ ONLY in terms of what tones get transmitted when you push the [PTT] button!! I recommend you use only the G DSQ mode, for it is simpler to understand. But I will attempt to shed some light on the GP DSQ mode too. Group Paging: Receive: (Radio may be set to either G DSQ or GP DSQ) Radio must receive group code (1,2,3) followed by a star (*) at a minimum in order to produce the pager tone. If the radio receives ONLY the three digit group code followed by a star (1,2,3,*) it will give the group page beep, the "G" in the G DSQ of the display will flash, but "Err" will be shown in the main display because the personal code was not properly sent. If the radio receives a group code followed by a star followed by a personal code OR a group code followed by a star followed by a personal code followed by two stars (1,2,3,*,4)
Group paging: (receive mode) This digit is re-written any time a proper group page is received to reflect the number of the other party who sent you the page. example: you have 123.4.5 in your DSQ setting and you now receive a group page consisting of 123*8** (or one simply consisting of 123*8). Your pager will make the group page type beep, "G" will flash in the display, AND, if you go to DSQ set mode, you will see that the last digit of the code displayed is now NOT a 5, but is instead an 8, informing you that "person number 8" was the originator of that group page. Thus, if your page code WAS set to 123.4.5 and you receive the group page 123*8**, when you now press [f] [DSQ set] you will no longer see 123.4.5 but instead see 123.4.8. (transmit mode) This digit is NOT USED in group page transmit mode. Personal paging: (receive mode) This digit is re-written any time you receive a valid personal page, and will display the personal code of the person who sent that page. example: you have 123.4.5 as your DSQ code, and you receive the following sequence: 1234*7 Your pager will now make the personal page type beep, "GP" will flash on the display, and if you press [f] [DSQ set] you will no longer see 123.4.5 displayed, but instead will see 123.4.7. The last digit reflects the fact you received a personal page from a person whose own personal code is 7. (transmit mode) This is the digit that is sent out FOURTH when you push the [PTT] button. It specifies which person in the group will receive the personal page. You must be careful to set this digit correctly for the person you in the group who you wish to page, keeping in mind that this digit gets re-written every time you receive a page of any kind! If you have 123.4.5 set as your DSQ code, pressing [PTT] in GP DSQ mode will cause 1,2,3,5,*,4 to be transmitted. Note very carefully that this, the fifth digit in your DSQ setting display, is sent out FOURTH when you are in GP DSQ mode and press the [PTT] button! DTMF Wild Card function: If you forget a squelch or paging code, you can pick up and decode codes sent by others. Use [f] [DSQ set] to set DSQ first to 000.0.0 and then set it to ###.0.0. (upside down As will be displayed instead of #s). Now set your radio to G DSQ mode. If you receive ANY valid page, the radio will beep. Press [f] [DSQ set] and the ###.0.0 display will be replaced by the page code you just received. DTMF Decode function: At any time, any codes received will be decoded and kept in the M3 dialing number. Thus, any time you hear a bunch of DTMF codes on the air, you can press the [Dial Ch] button, then rotate the top selector know so that M3 is displayed, then use the up and down arrow buttons (* and #) to scroll the display right (up arrow) or left (down arrow). Up to 16 digits will be retained. You can also set the radio to DSQ mode while lying in wait to receive DTMF tones. That way, the radio will break squelch when it has received three or more DTMF tones, alerting you to the fact it has captured a code. Note: according to the manual, you must have phone numbers stored in one or both dial memories (M1 and M2) for the decode to work. But in my experience that does not seem to be required by my unit.
17 Aging (Not required to use) Reference Frequncy Adjustment
1. In The adjustment mode, select channel 1 by rotating the mail tuning dail. 2. Press the PTT Key to start transmission. 3. Rotate TC7 on the Main board until the value on the frequency counter matches fhe one dispIayed on the LCD. 4. On 145,05 MHz messure TP1 near the VCO and to obtain 1.2V+0.1V (if the frequency display
is flashing, the PLL is unlocked.) High Power Adjustment 1. In the adjustment mode, select channel 2 by rotating the main tuning dial. 2. Hold down the PTT key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the vaue closest to 5W by rotating the main tuning dial. 4. When the PTT key is released, the output power at that time will be stored as the high power setting. Low Power Adjustment 1. In the adjustment made, select channel 3 by rotating the main tuning dial. 2. HoId down the PTT key to start transmission. 3. While watching the reading of the TX power meter, set the output power to the value closest to 0.8 W by rotating the main tuning dial. 4. When the PTT key is released, the output power at that time will be stored as the low power setting. Minimum Frequency Seasitivity Adjustment See "Note on Adjusting the Sensitivity" later in this section. 1. In the adjustment mode, select channel 4 by rotating the main tuning dail. 2. Set the minimum frequency sensitivity rotating the main tuning dial, while F appeares after the FUNC key is pressed. Medium Frequency Sensitivity Adjustment See "Note on Adjusting the Sensitivity" later in this section. 1. In the adjustment mode, select channel 5 by rotating the mail tuning dial. 2. Set the frequency sensitivity rotating the main tuning dial, while F appears after the FUNC key is pressed. Maximum Frequency Sensitivity Adjustment See "Note on Adjusting the Sensitivity" later in this section. 1. In the adjusment mode, select channel 6 by rotating the main tuning dial. 2. Set the maxium frequency sensitivity rotating the main tuning dial, while F appears aftet the FUNC key pressed. S-meter (1) Adjustment 1. In the adjustment mode, select channel 7 by rotating the main tuning dial. The S-meter will show a single circle 2. Enter "0" dBu(EMF) with the transceiver tester (SSG). 3. Press the F Key. The transceiver beeps indicating the new setting has been stored successfully. S-meter (Full) 1. In the adjustment mode, select channel 8 by rotating the main tuning dial.
corner.. There are two resistors with the numbers 000 (zero zero zero) on it. Actually they are no resistors, just a wire, but in smd it looks like a resistor. so get them off the board and do a reset !!!! The reset is very important because otherwise you will not get the new freq-range. You got it???? Hopefuly, if not, leave a msg in bbs DB0AHA. Greetings from DL1BEQ frank Rmks: This modifycation let you loose your warrantee, and also may cause problems with your national communicantions authority.
This modification is read 703 times.
(DJ-500) Adjustment points for DJ-500TE
Item 5 volt line voltage
Adjustment Point VR605
Adjustment Method Turn VR605 so that the voltage of 16 pin og IC601 should be 5.1 V.
Spec 5.1 V 0.1 V
VCO P/D voltage
L401 (RX VCO) (VHF) Adjust L401 so that the voltage of C362 (+) is L501 (TX VCO) (VHF) 1.5 V. L406 (RX VCO) (UHF) Adjust L501 so that the voltage of C362 (+) is 2.0 V. L504 (TX VCO) (UHF) DJ-500E Adjust L406 so that the voltage of C343 (+) is 1.1 V. DJ-500T Adjust L406 so that the voltage of C343 (+) is 1.9 V. DJ-500E Adjust L504 so that the voltage of C343 (+) is 2.1 V. DJ-500T Adjust L504 so that the voltage of C343 (+) is 3.0 V.
1.5 V 0.3 V (145 MHz) 2.0 V 0.3 V 1.1 V 0.2 V (435.0 MHz) 1.9 V 0.2 V (445.0 MHz) 2.1 V 0.3 V 3.0 V 0.3 V
Set the unit in the 435 MHz 500 Hz transmission mode at (445 Mhz 500 Hz) 435 MHz (DJ-500T: 445 MHz) and adjust TC209. On "Hi" position, turn VR201 for 6.6 W output at 145.0 MHz 13.0 V. On "Lo" position, turn VR204 for 0.6 W output at 145.0 MHz 13.0 V. 6.5 W 0.5 W 0.5 W 0.1 W
VHF power output
UHF power output
5.5 W 0.5 W On "Hi" position, turn VR202 for 5.6 W output at 435 MHz 13.0 V. (DJ- 0.5 W 0.1 W 500T: 445 MHz 13.0 V) On "Lo" position, turn VR203 for 0.6 W output at 435 MHz 13.0 V. (DJ500T: 445 MHz 13.0 V) Input a signal of 1 KHz/50mV into the MIC jack and adjust VR604 so that you obtain 4.8 KHz/Dev in the transmission mode. Input a signal of 1 KHz/50mV into the MIC jack and adjust VR601 so that you obtain 4.8 KHz/Dev in the transmission mode. 4.8 KHz 0.2 KHz
4.8 KHz 0.2 KHz
Subaudibel tone deviation (DJ-500T)
On the "ENC" mode at 0.8 KHz 449 MHz, turn VR1 so 0.1 KHz that the deviation is 0.8 KHz. Pressing Tone button at 3.5 KHz 435.0 MHz, turn VR1 so 500 Hz that the deviation is 3.5 KHz. Pressing  key at 435.0 MHz (DJ-500T: 445.0 MHz), turn VR1 so that the deviation is 3.3 KHz. 3.3 KHz 500 Hz
1750 Hz tone burst deviation (DJ-500E)
UHF receiving sensitivity (SG output: Mod 1KHz, 3.5KHz/dev)
TC201 TC202 TC203 L602 L603 L607
1. Set the frequency at 435.0 MHz (DJ500T: 445.0 MHz) and turn the squelsh control OFF. 2. Adjust TC201, TC202, TC203, L602 and L603, so that the RX sensitivity becomes macimum. 3. Adjust L607 so that the audio output becomes maximum. 1. Set the frequency at 145.0 MHz and turn the squelch OFF. 2. Adjust L221, L222 and L223 so that the sensitivity becomes maximum. Turn VR603 so that the  begins to light. Turn VR609 so that the  begins to light.
TNC Audio in Audio out PTT Ground Ground 3.5mm 2.5mm 2.5mm 2.5mm 3.5mm DJ580 plug plug plug base base tip tip tip section section Wire (if using Alinco cable) Green White (needs 1n cap. in series) White (via 1/8watt 33k resistor) Screen Brown / Twist together
DJ580 mic (white) -----------------l l------------- TNC audio out l 1n capacitor > < > 33k resistor < l l TNC ptt line (0 volts to transmit)
NOTE: If you have any Tx switching problems you can try adding two 1n caps between white wire and ground and TNC audio out and ground. I use the 580 myself so I know it works. 73's from Jim G0DPX @ GB7WRG #19 GBR. EU.
This modification is read 1205 times.
(DJ-580) ALINCO DJ-580EB sensitivity measurements
All sensitivity measurements performed with Radiocommunication Tester CMT from Rohde & Schwarz. DJ-580 EB externally supplied with 13.8 Volt Modifications present during this test: 1. Keyboard modification (130 - 174 MHz & 400 - 470 MHz reception) 2. Hardware modification (108 - 143 MHz (AM !) & 810 - 990 MHz reception)
144-146 MHz band: Generator of CMT set to 2.8 KHz FM-deviation with 1 KHz AF. Sensitivity is measured for 12 dB SINAD with CCITT filter in CMT switched ON.
144.000 144.500 145.000 145.500 145.995 MHz MHz MHz MHz MHz 0.12 0.11 0.13 0.12 0.12 V V V V V max. 36 dB SINAD at 5.60 V
max. 36 dB SINAD at 5.60 V
430-440 MHz band: Generator of CMT set to 2.8 KHz FM-deviation with 1 KHz AF. Sensitivity is measured for 12 dB SINAD with CCITT filter in CMT switched ON.
430.000 432.000 434.000 436.000 438.000 439.995 MHz MHz MHz MHz MHz MHz 0.15 0.18 0.18 0.18 0.16 0.17 V V V V V V
max. 36 dB SINAD at 3.0 V RF input
Aircraft band: 108 - 142.990 MHz AM (after hardware modification) Generator of CMT set to 80% AM-depth with 1 KHz AF. Sensitivity is measured for 12 dB SINAD with CCITT filter in CMT switched ON.
108.000 109.000 110.000 115.000 120.000 125.000 130.000 135.000 140.000 141.000 142.000 142.990 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 0.80 0.75 0.68 0.77 0.60 0.55 0.45 0.43 0.37 0.36 0.35 0.38 V V V V V V V V V V V V max. 16 dB SINAD (!!) (ca. 18% dist. !!)
max. 17 dB (!!) SINAD at 1,15 mV RF input max. 16.8 dB(!!) SINAD at 0.66 mV RF input max. 17 dB (!!) SINAD at 0.45 mV RF input
UHF extended band: 810 - 999 MHz FM (after hardware modification)
Generator of CMT set to 2.8 KHz FM-deviation with 1 KHz AF. Sensitivity is measured for 12 dB SINAD with CCITT filter in CMT switched ON.
810 - 825 MHz 826.000 MHz 827.000 MHz 830.000 MHz 840.000 MHz 850.000 MHz 860.000 MHz 870.000 MHz 880.000 MHz 890.000 MHz 900.000 MHz 910.000 MHz 920.000 MHz 930.000 MHz 940.000 MHz 950.000 MHz 953.000 MHz 954 - 999 MHz no reception (probably due 0.60 V max. 34 dB 0.60 V 0.40 V 0.25 V 0.25 V max. 34 dB 0.28 V 0.50 V 0.64 V 0.78 V 0.82 V 1.00 V 1.14 V 1.08 V 1.33 V 2.53 V 3.60 V no reception (probably due to not locking of the PLL) SINAD at 9 V RF input
SINAD at 8.5 V RF input
to not locking of the PLL)
This modification is read 1123 times.
(DJ-580) ALINCO DJ-580EB output power measurements
All power measurements performed with Radiocommunication Tester CMT from Rohde & Schwarz. 144 - 146 MHz band:
+-------------------------------------------------------------------------+ Freq. L M H Remark +------------+------------+-----------+-----------+-----------------------+ 144.000 MHz 0.327 W 1.28 W 5.40 W (13.8 V. ext.) 0.343 W 1.28 W 3.18 W (EBP-20, fully charged) 144.500 MHz 0.322 W 1.26 W 5.35 W (13.8 V. ext.) 0.339 W 1.26 W 3.16 W (EBP-20, fully charged) 145.000 MHz 0.318 W 1.25 W 5.27 W (13.8 V. ext.) 0.333 W 1.25 W 3.16 W (EBP-20, fully charged) 145.500 MHz 0.313 W 1.23 W 5.20 W (13.8 V. ext.) 0.330 W 1.23 W 3.19 W (EBP-20, fully charged) 145.995 MHz 0.309 W 1.21 W 5.16 W (13.8 V. ext.) 0.324 W 1.21 W 3.17 W (EBP-20, fully charged)
430 - 440 MHz band:
+-------------------------------------------------------------------------+ Freq. L M H Remark +------------+------------+-----------+-----------+-----------------------+ 430.000 MHz 0.294 W 1.48 W 4.91 W (13.8 V. ext.)
432.000 MHz 434.000 MHz 436.000 MHz 438.000 MHz 439.995 MHz
0.313 0.294 0.313 0.290 0.313 0.290 0.320 0.287 0.307 0.284 0.302
W W W W W W W W W W W
1.44 1.49 1.45 1.49 1.46 1.48 1.45 1.47 1.45 1.45 1.43
2.44 4.91 2.43 4.90 2.41 4.88 2.40 4.93 2.39 4.95 2.39
(EBP-20, fully charged) (13.8 V. ext.) (EBP-20, fully charged) (13.8 V. ext.) (EBP-20, fully charged) (13.8 V. ext.) (EBP-20, fully charged) (13.8 V. ext.) (EBP-20, fully charged) (13.8 V. ext.) (EBP-20, fully charged)
(DJ-C4) Alinco DJ-C4 wideband RX/TX mod
Carefully remove the rear case. CUT THE RED WIRE loop directly above the Lithium-ion battery. Reset the microprossessor (Press and hold [VM] and [FUNCTION] buttons and turn on the radio (all memories will be lost)) New ranges: rx 380-470 tx/rx 420-473.995.
.-~~ -. | |
------------------------------------------------|--|-] lithium battery ] ] ______________________________]
This modification is read 570 times.
(DJ-C5) Alinco DJ-C5 MARS/CAP Mods
WARNING: PERFORMING THIS MOD MAY VOID ANY AND ALL WARRANTIES 1. Remove the three case screws on the rear of the DJ-C5T. 2. Carefully remove the rear case to expose the main circuit board. 3. Locate and cut the RED wire loop towards the middle of the circuit board. The red wire is a loop about 5/8" long located about " from the charging jack in the 2:00 position. 4. Reassemble the radio. 5. Reset the CPU (press the FUNC key and the MW key while turning the radio on).
New frequency range = RX 118.000 ~ 135.995 AM Aircraft TX/RX 136.000 ~ 173.995 NFM TX/RX 380.000 ~ 472.995 NFM
Gru DC0EO Peter aus Duisburg Thanks to WD9HIK for the picture.
(DJ-G1) General coverage for Alinco DJ-G1
Put radio in tx KL mode, push and hold the func key, then you pres v/m ( v/m-m/v) + call ( call/band) + A ( pri ) the display shows open or close. Same prosedyre to open and close the radio. It transmit from 130-173 MHz.
This modification is read 562 times.
(DJ-G5) Alinco DJ-G5T extended TX
To extend the TX (RX is already extended) do the following: 1. Remove the 4 screws that hold the back cover of the unit on. 2. CAREFULLY pry the case apart (It's helps to remove the VFO/Mem/etc knob first) 3. On the FRONT portion (DTMF Pad) of the case, in the upper right-hand corner you will see a BLUE wire. Cut that carefully. 4. Reassemble the unit. 5. While holding the FUNC key, press POWER to reset the unit. 6. Viola! You know have extended TX! Hope this helps all DJ-5GT users. Sincerely, Kevin Bednar KB2YPU
This modification is read 1826 times.
(DJ-G5) Extended RX/TX for DJ-G5E
Author: Sean (G0NVJ) - firstname.lastname@example.org.MODIFICATION.NET
Extending the recieve range.
To extend the recieve range to AM/FM 108-173.995mhz, 400-511.995mhz and 800-999.990mhz there is a simple keypad sequence as follows.
Press and hold the function button on the side and press the FL button twice This puts the frequency lock on.Then whilst pressing the function button press #212, The display should then read "OPEN". Then remove the frequency lock by pressing function and FL together.
Extending The Transmit range.
The radio can be made able to tramsmit between 130-174mhz and 400-512mhz (if it cant already after the above mod) by removing the back and cutting the blue loop of wire near the speaker socket and resetting the radio. I have since found out that this mod does not appear to work for the DJ-G5T
(DJ-X1D) Increase frequency range ALINCO DJ-X1D
Here's a way to increase the freq.range of the Alinco DJ-X1D: 1. Press (and hold) the F-key, now press the FL-key - the keypad is locked 2. Enter the folowing code: 212617 - "open" appears in the display 3. Now press the F-key and the FL-key again Now the freq.range will be +/- 100kHz ~ 1.3gHz !!!
This modification is read 575 times.
(DJF-1) Extended TX and RX for DJF-1T
pen the radio and place it face down with the BNC jack up, and locate two jumper wires on the lower right hand corners of the set. The red jumper is for extended receive, and the blue(I think it is blue?) jumper is for extended transmit. Just cut/unsolder the red jumper for extended receive, blue for extended transmit, or both jumpers if you want both. Push the F button while turning the set on to reset radio to factory defaults. The extended receive (AM aircraft) can be activated by pressing the B button on the keypad. (If you cut both jumpers) A letter A will show up on the LCD indicating that radio is in the AM mode. To go back to FM, just press B again. I think B just activates a second VFO in the radio, since radio retains the AM frequency when toggle in and out of te AM mode. My serial number is 8221, so this mod should work for radio with serial numbers close to mine. The radio will not transmit in AM mode, but it will transmit up to the ~160MHz range. I can say that it works up to the weather band frequencies. I've checked it by transmitting on 162MHz to a FT-415 at the lowest power setting inside an enclosed screen room. A few words about the radio in general. I had the radio for about two days and I already had several IFR flights with it on board an airplane. The radio performed flawlessly. The fit and finish of
the radio is excellent. The entire radio case is cast luminum, except the battery case, which is plastic. The only gripe I have about the radio is the battery latch. It seems to do the job, but looks a little flimsy. If I really sqeeze the radio HARD, I can feel a tiny bit of movement between the battery case and radio. But I complaint about the same thing about the glove compartment in my Honda. I prefer the what we pilots called " human engineerd" aspect of the radio. Most of what I use in the airplane are rarely more than two buttons away. God only gave me two hands a while back, and I need one to fly the airplane, and the other to toggle the radio controls.
9. 10. 11. 12. 13.
16. Reset the cpu as shown in your owners manual. This is because that the cpu is located on the board you were working on and may have some bad data after working on the rig. You may have to reset the cpu when you test the rig in order to show the full lcd display. Any questions can be sent to me at my home bbs and i will try to answer them to the best of my ability. Thanks and 73's Frank N2JYG @ WA0PTV.#WNY.NY.USA.NOAM
This modification is read 879 times.
(DR-110) 9600bd ALINCO 110,112,1200
Hello FELLOW Packeteers! I just got off the phone with Matt from Alinco! I have been asked if the 9600 baud Mod that I posted would also work fr the 110. YES IT WILL! The 110, 112 and 1200 radios are identical except for the power output of the 1200 (25-watts high power compared to the 45-watts of the 110 and 112!) and the 112 has a LCD display to replace the piece of junk one on the 110! Also, if you want to have more power in the 1200, you can buy the 100/112 PA Board (45-watts) for $65.00 from Alinco. It also requires buying 4 high power switching diodes for $20.00 from Alinco. $85.00 for 20-watts?.Doesn't sound like a good investment to me. Don't forget the time involved with doing this mod. I discourage the use of HIGH POWER and have posted bulletins on this subject! Never the less, I feel obligated to pass this info on to you, I am not the U.S. Government, I will NOT keep things from you! To follow is the 9600 baud Mod I received from Alinco. Alinco warns that the Warranty is void if this Mod is performed! KA1BOY has been great enough to try this Mod and says it works great for 1200 baud as well as 9600 baud! From all of us to you, THANK YOU BARRY! One point to remember, you will not be able to use the radio for voice. This mod uses the Mic Connector. TRANSMITTER 1. 2. 3. 4. Remove R-31 Remove C-40 (save this part, it is to be reused!) Connect one leg of C-40 to PIN 7 of the VCO Board Connect a jumper from the free leg of C-40 to the HOT end of C-35 The MIC input is now connected DIRECTLY to the VCO!
This capacitor connects D1 (back to back diodes) to the first IF line. D1 is supposed to be a "limiter". Unknown why Alinco chose to put in such a limiter, as the integrated IF chip IC-1, an MC3357, has a built-in limiter. Also, the Kenwood TM-231 which uses nearly the same layout and circuit, doesn't have such a ciruit. While the intermod hasn't gone away entirely (I'm not done with it yet!), it has diminished enough to make the rig usable on packet AND voice now. 73 de Bill, K0ZL@W0LJF.#NECO.CO.NOAM
This modification is read 604 times.
(DR-1200) DR-1200T Full Band Modification
1. Remove 2 screws located on top of cover. 2. Loosen the 4 screws on both sides of top cover (do not remove). 3. Remove top cover 4. Locate Yellow wire Loop behind tuning Knob (this wire loops from the control board mounted on front pannel). 5. Cut loop and tape ends. 6. Replace top cover. 7. Reset radio (press "F" and VCO/M keys together. While holding down keys turn off and on Power). Factory settings will be restored however the new frequency range will be from 132 to 173 MHz. Any memory will have to be reprogramed. These insructions are from Alinco, I've done them to my set and it works great.
(DR-130) Here is the expanded TX mod for the Alinco DR-130
1. Open the top of the case by removing the three screws. 2. Locate the blue and red loop of wire near the display, facing toward you. 3. Cut the blue and red loop of wire, and tape up the ends. Red wire = RX and Blue wire= TX. 4. Replace cover of the radio. 5. Reset the radio by holding the function key down and turning on the power.
This modification is read 1306 times.
(DR-130) Change display between frequency or channel
Insted of seeing frequency display (147.585 etc.) You can have it read out like a business band radio (CH-1) by holding the VFO/M/W key and turning on the power.
This modification is read 1152 times.
(DR-135) Alinco DR-135T MARS/CAP Mod
DR135T all versions (T/TG/TP/TPG) Waring: You must have a proper license to operate on the MARS/CAP frequencies. Alinco declines responsibilities for the use of modified equipment out of ham bands. The warranty is void when the modification is done. The declared specs are not applicable out of the ham bands. DR-135T operates in the narrow FM mode TX/RX but the unit is not officially new CAP requirements compliant. Modification: Turn the radio off. Disconnect the power source. Open the bottom cover by removing the 4 screws located on each corner of the bottom cover surfce. Locate a BLUE looped jumper wire that comes out of a slot on the back of the front control unit (it is attached to the back of the front panel on a pad labeled JP3). Remove the jumper and trim the remaining wire properly to prevent a short circuit. Reassemble the bottom cover. Connect the power source and turn on the unit with the FUNC key pressed to reset the microprocessor. Settings will become the factory default. The unit will transmit and receive between approximately 140 and 170 MHz where the VCO will lock. If the display is flashing, you have lost VCO lock and operation is not possible. Alinco does not guarantee any operations outside of the amateur bands. [from an Alinco mod sheet, with some clarifications added!] [Good luck, but don't blame me if you foul-up your new radio! :-) ]
This modification is read 1252 times.
(DR-140) Here is the expanded TX mod for the Alinco DR-140
1. Open the top of the case by removing the three screws. 2. Locate the blue loop of wire near the display, facing toward you. 3. Cut the blue loop of wire, and tape up the ends. 4. Replace cover of the radio. 5. Reset the radio by holding the function key down and turning on the power. For E-Version (DR-140E) Give RX from 118 - 173 MHz. a. Bring the radio into Key-Lock. Press V/M, CALL, SET in this sequence three times. Exit from Key-Lock. If you reset the radio the range will diminish to the original state. b. Instead of doing the above, you may remove R349 and reset the radio.
(DR-150) Alinco DR-150T
Author: Terry E Muskoff Wow I'm the only one with the mods for this, Alright! It's so simple just cut both red and blue wires which are on the left side of the display. Tape the ends so they don't touch anyone.
To get : TX - 136.00mhz - ~173.995mhz RX - 108.00mhz - ~175.00mhz 430.00mhz - ~510 mhz
1. Unscrew the 4 screws on the top plate 2. Cut red loop of wire by the display on the left 3. Cut the blue loop of wire by the display on the left 4. Tape ends 5. Put cover back on 6. Hold down f when you turn it on I know this by experimenting with my own radio. I don't take responsibly if you ruin yours trying this. GOOD LUCK and don't stress out, it's not as hard as it sounds.
(DR-235) Alinco DR-235-T expanded xmit/rcv
Author: - EDatBCFR@aol.com.MODIFICATION.NET
Turn the radio off. Disconnect the power source. Open the bottom cover by removing the 4 screws located on each corner of the bottom cover surfce. Locate a BLUE looped jumper wire that comes out of a slot on the back of the front control unit (it is attached to the back of the front panel on a pad). Remove the jumper and trim the remaining wire properly to prevent a short circuit. Reassemble the bottom cover. Connect the power source and turn on the unit with the FUNC key pressed to reset the microprocessor. Settings will become the factory default. The unit will transmit and receive between approximately 200.000 and 299.999 MHz where the VCO will lock. If the display is flashing, you have lost VCO lock and operation is not possible. Also, if you press the FUNC key and the SQL key when you turn the power on you will get a handy digital voltage display. (Example: 13.7v)
This modification is read 524 times.
Drittel, oberhalb der 5 Bauteile Q 13-C81. 3. Das Poti fr den HUB am G3RUH sollte so eingestellt werden, da sich ein TX-Signal von ca. 0,4 VSS einstellt. 4. Die Jumper fr die TX-Kurve sollten auf 10 und 11 stehen. So, das wars von mir. Ansonsten luft alles Prima. vy 73, de Martin @ DB0OQ
This modification is read 825 times.
(DR-570) RX 850-890Mhz on the DR570T
If you have already opened up the expanded TX/RX ability of the DR570T by cutting the jumper and resetting the CPU, you can also RX 850-890Mhz (and 335-375Mhz) by doing the following: 1. make sure the 2M side of the radio is in VFO mode. 2. push to make 2M the sub-band (440 side is the main band) 3. push. "SUB" indicator should come on. 4. push. should see some 350.xxx freq. in the sub-band. 5. push. should see some 850.xxx freq. in the sub-band. 6. push. back to "normal" radio mode. 7. push to switch the 850.xxx band to the main band where you can play with it. Note: While monitoring the 800Mhz band, the 440 band will be desensed.
This modification is read 913 times.
(DR-570) Expanded RF / Cross band repeater mod Alinco DR-570T
1. 2. 3. 4. 5. Remove Battery and antena. Remove screws from case and open radio(3 screws in the to and 2 in the bottom). Locate and cut the the diode J1 behind LCD display. Turn repeater/radio switch to repeater mode. Reset the microprocessor.(press and hold [FUNTION] and turn pwer on.)
6. Remove the twopin conector to disable audio bleed in reater mode. (optional) 7. Reassembleradio.
This modification is read 965 times.
(DR-590) Expanded frq. for DR-590T
>I just picked up a brand new Alinco DR-590T and have had some problems that >I would like to share with you all out there in ham-net land. Maybe someone >out there can help me with a couple of these problems. I guess not too many people have these rigs yet otherwise I would not have to respond to your request. I hope there are others besides yourself that are interested in this information. In any event this is what worked for me (sans jinglish). I am not however responsible for what you do to your rig. etc. >1, I got this unit because of all the cool features it is supposed to have, >including cross-band repeat. The instruction manual does not even mention >this feature. After calling Alinco I found that this was a feature functions >only after modification. They said (more than a week and a half ago) that the >would send me the modification instructions. I haven't heard anything from >them. If you ask them (nicely) there are (a few) dudes at Alinco that are willing to help and are smart enought to be helpfull (there is a differance ;-}). They can fax you the information or even send it to you next day air at no charge if you ask politely or are VERY persistant (as in my case). Now the big news. to modify the rig to xmit out of band (to call the cops etc ;-}), to operate as a cross band remote, etc. follow these easy steps. 1. Remove the control head from the unit (2 screws on each side of the forward part of the rig, near the control head). 2. Hold the control head in your hand face down and remove the two screws you see on the back of the control head. 3. Remove the cover from the back of the control head (it snaps off) 4. Locate a blue loop of wire. There is only one blue loop of wire. 5. Cut, unsolder, remove, destroy, nuke, the blue wire (your choice) [I neither advocate nor encourage the indiscriminate use of nukes] 6. Undo step 3 7. Undo step 2 8. Undo step 1 9. Connect the rig to antennas, power etc as outlined in the manual. 10. Hold down the function key and turn on the power This is what you will find. The rig now transmits everywhere. it now will display (not receive) 800Mhz band and 300Mhz band on the 440 side of the display in rotation (press the uhf switch to switch from band to band). It will now display (not recieve) the aircraft band (yes it does indicate AM) on the 2 meter side of the rig. There is no AM detector presently but I am working on it. Date: 18-03-2002 User comment From: Paul Munsel N5XMV
Software ZRB634FW Vodafone 720 KRC-378R CLP-6002 RM-AV3100 DXG-328 TL-WR1043N WD-8030W MX200 AEG-electrolux Z65 VC960 LC-32D4U Gaufrier ST290 KFX 450R VC-405N 223BW Heath PA12 KW-AVX-800 Server CDX-3180 AP4510 PV-GS50D Pixon Cubicle Blitz BZX8 SHR-M1 Portable Series I GC4430 Messenger CP1426T Barm969P SA-VE225 Electronico Iq24 RH7796W BDP-6003 Temporis MAX MS-196VUT Aspire 1600 WF-J1264A RZ67proii D100E512 CDJ-850 Control PRO LE37M86 25931 FW-C390 RH-4800W TD4100 DVP3042 PRO 454 YP-RO Siemens TEK 21FU6RLX HQ8155 CMT-P555DVD WL-5470AP KX-TG8323E TC-KE400S RSX-1560 Aspire 5100 HA250JC EMP-503 CT-5372 Asko 1885 EOS-1DS KDL-40P302H Rmsthm303J-RM-sthm303 Edition Control 1X ICF2010 EOB53003X CT-5372E Install DD BD461 AJ-HD150P RS261mdbp EOS 50 YZF-R6s-2008 CC-ED200 Engines PW-AT760 NN-D801 BUA-100 ZWY180 3302 3342 Advance SP TX-28LK1F SGH-A137 SPH-M4800 KX-TG7301PD AV-M99 2 6 Freestar-2006 All-IN-ONE Jimmy 1997 Mercury Motorlift500
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101