Alpine CDA-9813 Car Audio, size: 1.3 MB
Here you can find all about Alpine CDA-9813 like manual and other informations. For example: review, ipod.
Alpine CDA-9813 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Alpine CDA-9813 please write about it to help other people.
[ Report abuse or wrong photo | Share your Alpine CDA-9813 photo ]
alpine cda 9813
User reviews and opinions
|bruce384||7:54pm on Wednesday, August 18th, 2010|
|Tons of features. Great power and sound. MP3 Text. XM compat A little tough to configure. Instructions not very thorough|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Single and Multi-Audio inputs + iPod charging Adapters for Aftermarket Radios
The following list of connection cables are designed to cover a wide variety of consumer electronics, including the Apple iPod to aftermarket radios such as Alpine, Kenwood, JVC and Pioneer and Sony and will allow users to route audio from any number of audio devices such as the iPod, mp3 players, any audio player using headphone outputs or any device using RCA outputs (DVD player, Game System, etc.). The Connex2car and 3NPUT products includes an iPod connector, 3.5mm headphone jack and stereo RCA connectors on one end and a radio specific connector on the other depending on application. They all connect to CD changer port on the radio providing great sound quality and even provide charging for the iPod. (Only) This innovation offers audio performance that is more enjoyable than substandard FM-modulated solutions that transmit audio into the FM tuner instead of the preferred accessory port connection. For the previously named head units, it is necessary to enter the radio's menu and turn on the Auxiliary input option. This will let the head unit know that an auxiliary device is connected to the CD changer port. Many customers have purchased our auxiliary input adapter cables plug them into the CD Changer port and report getting no sound this situation is normal because most if not all aftermarket Radios are programmed to automatically recognize a CD Changer--- connecting an auxiliary input to select aftermarket radios will require changing the menu option from CD Changer to AUX. Note: These input adapters do not display or control iPod products from the aftermarket radio, they will however charge and play iPod music on the aftermarket stereo.
PXA04 and JVC/J-3NPUT J-LINK iPod/Aux Input Cable.
Installation instructions 1. Connect the J-LINK connector on the PXA04 or JVC/J-3NPUT to the CD Changer port on the radio. 2. Connect iPod to the dock connector 3. Look up the user manual for the corresponding JVC radio to enable to AUX function Here is how to enable the AUX function on JVC KD-LX111
To select the external component to use EXT INPUT you can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57, KS-U58 etc. (not supplied). To use the external component as the playback source through this unit, you need to select which component CD changer or external component to use. When shipped from the factory, CD changer is selected as the external component. LINE INPUT: To use the external component other than CD changer. CD CHANGER: To use the CD changer.
PXA03 and ALP/M-3NPUT Alpine M-BUS iPod/AUX Input Cable.
Installation instructions 1. Connect the M-bus connector on the PXA03 or ALP/M-3NPUT to the CD Changer port on the radio 2. Connect iPod to the dock connector 3. Connect the red wire to +12V ignition wire and the gray to ground 3. Look up the user manual for the corresponding Alpine radio to enable to AUX function Here is how to enable the AUX function on Versatile Link (V-Link) Alpine CDM-7874
Setting the AUX Mode (i.e. CDM-7874) You can input TV/video sound by connecting an optional "M-Bus V-Link" (M-Bus/RCA interface cable KCM-122B) to this component. 1 Press and hold the SETUP button for at least 3seconds. 2 Press the | or DN or UP | button to select the AUX mode. 3 Press the BAND button to toggle the mode between AUX ON and AUX OFF. 4 Press the SETUP button to return to normal mode. 5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment. TUNER CD AUX NOTE When AUX ON is selected, a CD Changer cannot be used.
PXA06 and ALP/Ai-3NPUT Alpine Ai-Net iPod/Aux input Cable.
Installation instructions 1. Connect the Ai-Net connector on the PXA06 or ALP/AI-3NPUT to the CD Changer port on the radio 2. Connect the red wire to +12V ignition wire and the gray to ground 3. Look up the user manual for the corresponding Alpine radio to enable to AUX function 4. Connect iPod to the dock connector --- Here is how to enable the AUX ON function on Versatile Link (V-Link) Alpine CDA-9815, 9811, 9813
The common operation for SETUP is step 1 to 4 as follows. See down below for further information about each SETUP menu. 1. Press and hold F/SETUP for at least 3 seconds. SETUP mode is activated. 2. Press or to select the desired SETUP menu. (e.g. Select AUX ON) Here is the explanation for CDA-9815 display example. NORMAL/HI-FI/STABLE DIMMER*2 SUB-W SUB-W STEREO/SUB-W MONO*2 CD-DA / CD-DA/MP3 BEEP SCROLL SCROLL TYPE*1 MUTE INTERRUPT AUX (AUX name)*3 PWR-IC CONTRAST*1 FONT*1 AREA *4 DEMO NORMAL/HI-FI/STABLE *1 CDA-9815 only. *2 CDA-9815/CDA-9813 only. *3 Displayed only when AUX is ON. *4 Radio 3. Press BAND/TEL. to change the setting. (e.g. Select AUX OFF or AUX ON.) 4. Press F/SETUP again. The display returns to normal mode. Setting the AUX Mode (V-Link) AUX ON / AUX OFF (Initial setting) you can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA121B) or Versatile Link Terminal (KCA- 410C) to this component. You can change the AUX name display when AUX ON is set. a. Select the AUX name by pressing or b. Then press BAND/TEL. If the KCA-410C is connected, it is possible to select two AUX names. Note: with the KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND/TEL. to select your desired device.
PXA02 and PIO/P-3NPUT Pioneer P-BUS iPod/Aux input Cable.
Installation instructions 1. Connect the M-bus connector on the PXA02 or PIO/P-3NPUT to the CD Changer port on the radio 2. Connect iPod to the dock connector 3. Connect the red wire to +12V ignition wire and gray to ground. 3. Look up the user manual for the corresponding Pioneer radio to enable to AUX function Here is how to enable the AUX function on select P-BUS radios
Using the AUX Source Select AUX as the Source 1 Press Source and hold until the unit powers down 2 Press function button until AUX appears in the display if the Auxiliary setting is not turned ON AUX cannot be selected
PXA07 Sony AUX-LITE iPod/Auxiliary input Cable
Installation instructions 1. Connect the RCA inputs of the PXA07 to the BUS AUDIO IN AUX IN connectors on the back of the Sony radio 2. Connect iPod to the dock connector 3. Connect the red wire to +12V ignition wire and gray to ground. 3. Look up the user manual for the corresponding Sony radio to enable to AUX-Lite function Here is how to enable the AUX-LITE function on Sony CDX-630 CD Receiver
Selecting Auxiliary equipment It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. 1. Press SOURCE repeatedly until AUX Aux appears in the display. 2. Adjusting the volume level. Press MENU appears in the display. Press the repeatedly to select the AUX Level Press Enter Press the repeatedly to select the desired level the volume level is adjusted in 1dB steps from -6dB to + 6dB Press Enter
If you're looking for a way to play a portable audio device, video system, or anything else through your Sony system, we make it extremely simple. In models with Aux Lite, the BUS audio inputs can be used as an auxiliary input instead of a CD changer input, allowing any audio signal to play through the head unit, and the entire audio system. Warning: The Sony Radio must be AUX-LITE ready.
The following Sony radio are AUX-LITE ready: CDX-GT805DX MEX-BT5000 CDX-RA700 CDX-M7815X CDX-F7710 CDX-M8810 CDX-F7705X CDX-F7700 CDX-F5700 CDX-M800 CDX-CA900X CDX-GT705DX CDX-R505X CDX-GT500 CDX-M7810 CDX-M8815X CDX-F5710 CDX-M8805X CDX-F5705X CDX-M850MP CDX-M630 CDX-F605X CDX-F50M MEX-1GP CDX-F7715X CDX-R5715X CDX-F7005X CDX-M8800 CDX-F7000 CDX-M3DI MEX-5DI
Revised May 11, 2007 1995-06 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
This symbol means important instructions. Failure to heed them can result in serious injury or death.
This symbol means important instructions. Failure to heed them can result in injury or material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+ and ) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the product.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
Be sure the temperature inside the vehicle is between +60C (+140F) and 10C (+14F) before turning your unit on.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire, electric shock or other injury.
If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.
Changing the Audio Level Display Pattern (CDA-9815RB/CDA-9813R/CDA-9812RX only)
You can select the Audio Level display from three display patterns. You can also deactivate the display.
Detaching and Attaching the Front Panel
Press DISP/B.OUT to switch the display pattern.
Turn off the unit power. Press (Release) at the upper left side until the front panel pops out. Grasp the left side of the front panel and pull it out.
AUDIO ADJUSTMENT EQ ADJUSTMENT X-OVER ADJUSTMENT OFF AUDIO ADJUSTMENT
AUDIO ADJUSTMENT BASS ADJUSTMENT TREBLE ADJUSTMENT OFF AUDIO ADJUSTMENT
The indicators show the value that is set in each mode as shown below.
AUDIO ADJUSTMENT Level Indicator Width indicator Frequency Indicator Sub-W Indicator VOLUME BALANCE FADER SUB-W EQ/BASS/TREBLE ADJUSTMENT LEVEL WIDTH FREQUENCY X-OVER ADJUSTMENT LEVEL SLOPE FREQUENCY -
The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction. To protect the front panel, place it in the supplied carrying case.
Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. Push the left side of the front panel until it locks firmly into the main unit. 2
Only when SUB-W is set to ON
AUDIO Adjustment Display Example for CDA-9813R VOLUME : 18 BALANCE : L6 FADER SUB-W : F6 : 9dB
Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.
EQ Adjustment Display Example for CDA-9813R LEVEL WIDTH : +2 :2
X-OVER Adjustment Display Example for CDA-9813R LEVEL SLOPE : -7dB : 2 (-12dB/oct)
FREQUENCY : 2k
SOURCE/ POWER TUNE/ A.ME BAND/ TEL. Rotary encoder
Manual Storing of Station Presets
Select the radio band and tune in a desired radio station you wish to store in the preset memory. Press and hold any one of the preset buttons (1 through 6) that you want to store the station on for at least 2 seconds.
The selected station is stored. The display shows the band, preset no. and station frequency memorized.
Preset buttons (1 through 6)
Listening to Radio
A total of 30 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, FM3, MW and LW). If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. If the FUNC indicator (only the underlined portion of the FUNC indicator for CDA-9811R) is illuminated, turn off the indicator by pressing F/SETUP, then you can perform the operation.
Press SOURCE/POWER until a radio frequency appears in the display. Press BAND/TEL. repeatedly until the desired radio band is displayed.
FM1 (F1) FM2 (F2) FM3 (F3) MW LW FM1 (F1)
Automatic Memory of Station Presets
Press BAND/TEL. repeatedly until the desired radio band is displayed. Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location no. 1.
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK
DX SEEK (Distance mode) DX SEEK (Local mode) DX SEEK (Manual mode) DX SEEK
DX SEEK (Distance mode) DX SEEK (Local mode) DX SEEK(Manual mode) DX SEEK
If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.
The initial mode is Distance mode.
Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning).
Tuning to Preset Stations
Press BAND/TEL. repeatedly until the desired band is displayed. Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory.
The display shows the band, preset number and frequency of the station selected.
Press g or f to tune in the desired station.
Holding down g or f will change the frequency continuously.
The ST indicator appears on the display when a stereo FM station is tuned in.
If the FUNC indicator (only the underlined portion of the FUNC indicator for CDA-9811R) is illuminated, turn off the indicator by pressing F/SETUP, then you can perform the operation.
Station Title Search Function
If titles for radio stations are entered, you can search for a radio station from its title.
TUNER CD CD CHANGER* TUNER
* Only when the CD changer is connected
Press 4( played.
M.I.X. (Random Play)
Press 5( ) in the play or pause mode.
The tracks (files) on the disc will be played back in random sequence. To cancel M.I.X. play, press 5( ) again.
) to play back repeatedly the track being
The track (file) will be played repeatedly. ) again and select OFF to deactivate repeat play.
CD mode : RPT : Only a file is repeatedly played back *1 RPT : A disc is repeatedly played back (off)
CD mode : M.I.X.:
Track are played back in random sequence.
*1 When a CD changer is connected If REPEAT is set to ON during M.I.X. play in CD changer mode, M.I.X. will apply to the current disc only.
M.I.X.:The tracks on all the CDs in the current magazine will be included in the random playback sequence.
MP3/WMA mode : RPT : Only a file is repeatedly played back RPT : Only files in a folder are repeatedly played back *2 RPT : A disc is repeatedly played back (off)
*2 When an MP3 compatible CD changer is connected If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F/SETUP to illuminate the FUNC indicator (only underlined portions of the FUNC indicator are illuminated for CDA-9811R), and go to the step above within 5 seconds. If a 12-disc CD changer is connected: In CD changer mode, press F/SETUP twice to illuminate the FUNC indicator (only underlined portions of the FUNC indicator are illuminated for CDA-9811R), and go to the step above within 5 seconds.
*3 When a CD changer equipped with the All M.I.X. function is connected If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode : M.I.X.: Only files in a folder are played back in random sequence. M.I.X.: Files are played back in random sequence. If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc. (off)
If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F/SETUP to illuminate the FUNC indicator (only underlined portions of the FUNC indicator are illuminated for CDA-9811R), and go to the step above within 5 seconds. If a 12-disc CD changer is connected: In CD changer mode, press F/SETUP twice to illuminate the FUNC indicator (only underlined portions of the FUNC indicator are illuminated for CDA-9811R), and go to the step above within 5 seconds. A disc that contains more than 40 tracks may not be correctly played back with the M.I.X. function on the CDA-9811R.
TYPE 1 will sound best if you have a subwoofer in your system. Use TYPE 2 or 3 if you are using small diameter speakers.
Press EQ and select the EQ mode. Press either g or f.
With each press of the button, the equalizer mode will display the selected equalizer characteristic.
FLAT(OFF) POPS ROCK NEWS FLAT(OFF) FLAT POPS ROCK NEWS : Flat frequency : Emphasize midrange : Emphasize lows and highs : Boost midrange and suppress highs and lows
Press and hold CENTER f for at least 2 seconds to return to normal mode.
Bass centre frequency and bass band width previously set are replaced when selecting TYPE 1 through 3. When bass type is set to OFF, your previous settings are restored. Bass type is not selectable when connected to an external audio processor. When you press DISP/B.OUT on the CDA-9812RX, you can switch the level Indicator display to the BASS adjustment display. For details, see Changing the Audio Level Display Pattern (page 7).
Selecting directly Select the desired button (1 through 4). : FLAT(OFF) : ROCK : POPS : NEWS
Press EQ to return to normal mode.
This function is inoperable when DEFEAT is set to ON (page 17). EQ mode is automatically cancelled if no operation is performed within 15 seconds. When you press DISP/B.OUT, you can switch the Level Indicator display to the EQ Adjustment display. For details, see Changing the Audio Level Display Pattern (page 7).
Adjusting and Storing the Equalizer Curve (CDA-9815RB/CDA-9813R only)
You can modify the Equalizer settings to create a response curve more appealing to your personal taste.
About the Crossover (CDA-9815RB/CDA-9813R only)
This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs. Each channel is controlled independently. Thus, each speaker pair can be driven by the frequencies for which they have been optimally designed. The crossover adjusts the HPF (high pass filter) or LPF (low pass filter) of each band, and also the slope (how fast the filter rolls off the highs or lows). Adjustments should be made according to the reproduction characteristics of the speakers. Depending on the speakers, a passive network may not be necessary. If you are unsure about this point, please consult your authorized Alpine dealer.
Press EQ to select the EQ mode. Press and hold EQ for at least 2 seconds. Press BAND/TEL. to select your desired frequency band.
BAND1 BAND2 BAND3 BAND4 BAND5 BAND1 The initial setting of each BAND is as follows. Frequency BAND1: 50 Hz, BAND2: 250 Hz, BAND3: 1.0 kHz, BAND4: 3.2 kHz, BAND5: 10 kHz Level BAND1-5: 0 Width (Q) BAND1-5: 1
LOW MID-L MID-H HIGH (HI) LOW
Adjustable frequency bands:
LOW MID-L MID-H HIGH : 20Hz to 200Hz (in 1/3 octave steps) : 20Hz to 200Hz (in 1/3 octave steps) : 20Hz to 20kHz (in 1/3 octave steps) : 1kHz to 20kHz (in 1/3 octave steps)
Press SOURCE/POWER to select the desired slope.
Adjustable slope: 0 (FLAT* (OFF)), 1 (-6dB/oct), 2 (-12dB/ oct), 3 (-18dB/oct), 4 (-24dB/oct). * FLAT cannot be set for the HIGH slope.
For setting another channel, repeat the steps 2 to 5.
After setting, press T.CORR/X-OVER to return to normal mode.
About the 2way/3way system You can switch to 2way/3way system mode with the 2way/3way switch on the side of the unit (page 44). *1 When setting to 3 WAY : The unit can be operated in a 3 way system.
F/R Sub. W
When setting to F/R/Sub.W : The unit can be operated in a 2 way system.
Crossover mode is automatically cancelled if no operation is performed within 15 seconds. When you press DISP/B.OUT, you can switch the level Indicator display to the X-OVER adjustment display. For details, see Changing the Audio Level Display Pattern (page 7).
*1 Subwoofer speaker. CDA-9812RX/CDA-9811R only You cannot change the Time Correction value for the subwoofer, but you can set the subwoofer's apparent position to the front by adjusting the Time Correction value of the front and rear speakers. For details, refer to the *1 on page 22. The sound is not balanced because the distance between the listening position and the various speakers is different. The difference in distance between the front left speaker and the rear right speaker is 1.75 m (68-7/8"). Here we calculate the time correction value for the front left speaker in the diagram on the above.
Conditions: Farthest Speaker listening position : 2.25 m (88-9/16") Front left speaker listening position : 0.5 m (19-11/16") Calculation: L = 2.25 m 0.5 m = 1.75 m (68-7/8") Time correction = 1.75 343*= 5.1 (ms)
Recalling the Stored Crossover Settings (CDA-9815RB/CDA-9813R only)
Press and hold T.CORR/X-OVER for at least 2 seconds. Press any one of the preset buttons (1 through 6) that has your desired crossover settings in memory. Press T.CORR/X-OVER to return to normal mode.
*2 Speed of sound: 343 m/s (765 mph) at 20C In other words, giving the front left speaker a time correction value of 5.1 ms makes it seem as if its distance from the listener is the same as the distance to the farthest speaker. Time correction eliminates the differences in the time required for the sound to reach the listening position. The time of the front left speaker is corrected by 5.1 ms so that its sound reaches the listening position at the same time as the sound of other speakers.
About Time Correction
Turn the Rotary encoder to adjust the desired time correction value.
To store the adjusted contents (CDA-9815RB/CDA-9813R only) 1) Press and hold any one of the preset buttons (1 through 6) for at least 2 seconds into which you wish to store the adjusted contents.
Repeat step 2 and 3 to set another speaker. After setting, press and hold T.CORR/X-OVER for at least 2 seconds to return to normal mode.
If no operation is performed in 15 seconds, the unit returns to normal mode.
Recalling the Stored Time Correction Settings (CDA-9815RB/CDA-9813R only)
Bass Focus mode Time Correction mode Normal mode Bass Focus mode
Press Rotary encoder to return to normal mode.
Press the preset button (1 through 6) that has your desired time correction in memory. Press and hold T.CORR/X-OVER for at least 2 seconds to return to normal mode.
Time Correction mode is automatically cancelled if no operation is performed within 15 seconds.
To cancel MX mode for all music sources, press MX to turn MX off. MX mode is automatically cancelled if no operation is performed within 15 seconds. Each music source, such as radio, CD, and MP3/WMA can have its own MX setting. On disks with both MP3/WMA and CD-DA, when the source changes from MP3/WMA to CD-DA or CD-DA to MP3/ WMA, MX-mode switching may delay playback slightly. Setting to MX OFF sets MX mode of each music source to OFF. This function is inoperable when DEFEAT is set to ON. MX mode does not function when MX is set to ON for MW, LW radio. If the unit is connected to an audio processor with the MX function, such as PXA-H700, etc., the MX processing can be applied to the audio processor. In this case the audio processor needs to be adjusted. For details, refer to the Owners Manual of the audio processor. When entering RDS signals, the MX operation cannot be performed.
DISP/B.OUT (CDA-9815RB/CDA-9813R/CDA-9812RX) MUTE/B.OUT (CDA-9811R) -/J TITLE BAND/TEL.
The display in MP3/WMA mode (MP3 files can be played back with the CDA-9811R model if an MP3 compatible changer is connected): CDA-9815RB
FOLDER NO./ FILE NO. ELAPSED TIME FOLDER NAME*5 FILE NAME
FILE NAME TRACK NAME*3 ARTIST NAME*3 TRACK NAME*3 ARTIST NAME*3 ALBUM NAME*3 ALBUM NAME*3 FOLDER NO./FILE NO. FRAME*4 ELAPSED TIME
Displaying the Title/Text
It is possible to display the CD/Station title if the title has been previously inputted (Titling Disc/Stations page 25). Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name, and the tag, etc., while playing MP3/WMA files.
It is possible to title your favourite CD's or radio stations. You cannot input titles on MP3/WMA discs.
You cannot erase CD-TEXT. NO DATA is displayed for 2 seconds if the title is not input in step 2, or if the title is erased in step 4.
Press TITLE and select the Title Display.
For details, see Displaying the Title/Text (page 24). For CDA-9815RB, see asterisk 1 of Displaying the Title/Text (page 24).
Blackout Mode On and Off
When Blackout mode is turned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality.
Press and hold TITLE for at least 3 seconds. The first character will blink.
Press BAND/TEL. to select the characters/ symbols.
Upper case Lower case Numeral/Symbol Upper case
Press and hold DISP/B.OUT (CDA-9815RB/CDA9813R/CDA-9812RX) or MUTE/B.OUT (CDA-9811R) for at least 3 seconds to activate the blackout mode.
The display will turn off. If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. To cancel Blackout mode, press and hold DISP/B.OUT (CDA9815RB/CDA-9813R/CDA-9812RX) or MUTE/B.OUT (CDA9811R) for at least 3 seconds.
Turn the Rotary encoder to select the desired letter/numeral/symbol available for naming. Press Rotary encoder to store the first character.
The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.
i-Personalize Operation (CDA-9815RB/CDA9813R only)
SOURCE/ POWER -/J Rotary encoder
Insert the CD-R disc containing the data. If the source is not the CD mode, press SOURCE/ POWER to change to CD mode. Press and hold -/J for at least 2 seconds.
The mode switches to the download mode to show the download confirmation screen.
Turn the Rotary encoder to select OK, then press the Rotary encoder.
Data search of the disc starts and the first file name is displayed.
Selecting NG will halt the download mode. If a file is not found by the data search, NO FILE is indicated. The NO FILE display will automatically disappear if no operation is performed for 5 seconds.
You can download data (from Alpines website) to a CD-R, and download and store the data to the CDA-9815RB/CDA-9813R. To start i-Personalize, access the URL below and follow the on-screen instructions.
Setting the AUX Mode (V-Link)
AUX ON / AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA410C) to this component. You can change the AUX name display when AUX ON is set. Select the AUX name by pressing g or f. Then press BAND/TEL. If the KCA-410C is connected, it is possible to select two AUX names. Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/POWER to select AUX mode and then press BAND/TEL. to select your desired device.
SOURCE/ TUNE/ POWER A.ME BAND/ TEL. TITLE Preset buttons (1 through 6)
Dynamic Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Dynamic Label after receiving the broadcasting station. Frequency Display* : the frequency of received stations are displayed. To switch the frequency display on the CDA-9813R/CDA-9812RX/ CDA-9811R, press TITLE. For details, see Changing the Display Mode (page 31). When you use DAB, you can select a desired ensemble which may contain one or more services, any of which can be received. Furthermore, each service contains a Service Component, which itself can contain any number of Primary or Secondary services, depending on the Service Component. Several different kinds of service can therefore be selected. * CDA-9813R/CDA-9812RX/CDA-9811R only
Changing the Service Using DAB Receiver for the Ensemble Seek Tuning (Optional)
DAB (Digital Audio Broadcasting) offers excellent sound quality even in a moving vehicle, enabling you to receive various types of information, including weather and traffic information, and it also displays information sent from the broadcasting stations. You can also let urgent broadcasts or announcements interrupt a current broadcast. If you connect the DAB Receiver Box TUA-T100DAB (separately sold), you can control DAB for the reception of broadcast. CD quality sound can be obtained from DAB broadcasts, although quality may differ on some services. Some broadcasting stations may perform test broadcasts. When DAB reception is poor, metallic noise may occur. This is not a malfunction. Services are received within the ensemble that you are currently receiving.
While receiving the ensemble, momentarily press g or f, and select the service that you desire.
The selected service label is displayed for 2 seconds, and then you return to the display that you select with the steps described under the section Changing the Display Mode (page 31).
Calling by the address book
You can call up the address book registered in the portable telephone to call from.
Calling by the outgoing/incoming/absent incoming history
You can place a call to any of the last 999 calls by the outgoing/ incoming/absent incoming history.
Press SEARCH in Phone Book mode to select the History mode. Press 8 or 9 to select outgoing history (display example: DIALED), incoming history (display example: RECEIVED ), absent incoming history (display example: MISSED). Turn the Rotary encoder, or press g or f to select the addressee from the outgoing or incoming history. Press :/J or the Rotary encoder to place a call. Press BAND/TEL. to end the call.
Press and hold BAND/TEL. for at least 2 seconds. Press SEARCH to select Phone Book mode.
A list in alphabetic order is displayed.
Retrieving an addressee by Alphabetic Sort List When displaying the Alphabetic Sort List, turn the Rotary encoder or press g or f to select the addressee. Press :/J or Rotary encoder to place a call. Press BAND/TEL. to end the call.
Retrieving an addressee by Selecting Search (A-Z search)
Press 8 or 9 to select an initial letter (A to Z) of the addressee. Turn the Rotary encoder to select the addressee. Press the Rotary encoder to place a call.
If all telephone numbers and registered names cannot be displayed at once, press TITLE to show undisplayed numbers and names. NO MEMORY (NO MEM for CDA-9811R) is displayed if there is no incoming history.
SMS (Short Message Service) Operation
You can be informed when you receive a short message.
Receiving a short message
Press BAND/TEL. to end the call.
If all telephone numbers and registered names cannot be displayed at once, press TITLE to show undisplayed numbers and names. NO MEMORY (NO MEM for CDA-9811R) is displayed if nothing is registered in the Phone Book.
When a text message is received, NEW MESSAGE for CDA-9815RB, NEW MESSAG for CDA-9813R/CDA-9812RX or NEW MSG for CDA9811R is indicated on the display.
The contents of the received message can only be read from the portable phone's display.
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone numbers registered in No. 1 to 9 of the address book.
Press any one of the buttons on the unit to cancel the display. The buttons that are pressed will enter the mode or will be activated.
Press and hold BAND/TEL. for at least 2 seconds. Within 5 seconds, press and hold (for at least 2 seconds) a preset button (1 through 6) to place a call. By pressing F/SETUP, and then pressing a preset button (1 through 3) for at least 2 seconds, you can place a call to the number registered in 7 to 9.
You can place a call by pressing :/J after momentarily pressing the preset button (1 through 6) of the number you wish to call. You can place a call by pressing the Rotary encoder, after selecting a number which you wish to call, by pressing g or f , or by turning the Rotary encoder.
If there is no telephone number registered to a preset button, NO PRESET (NO P-SET for the CDA-9811R) is displayed when you try to place a call.
SOURCE/ -/J POWER BAND/TEL.
Playing MP3 Files with the CD Changer (Optional)
If you connect a changer compatible with MP3, you can play CDROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
Press SOURCE/POWER to switch to the MP3 Changer mode. Press any one of the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. To pause playback, press -/J.
Select buttons (1 through 6)
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of this unit, the CD Changer will be controllable from this unit. Using the KCA-400C (Multi-Changer Switching device) or the KCA410C (Versatile Link Terminal) multiple changers can be controlled by this unit. See Multi-Changer Selection on this page for selecting the CD Changers. The controls on this unit for CD Changer operation are operative only when a CD Changer is connected. The DVD changer (optional) is controllable from this unit as well as the CD changer.
Controllable With Remote Control The CDA-9811R can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote control sensor.
Remote control sensor
Connectable to Remote Control Interface Box You can operate this unit from the vehicle's control unit when an Alpine Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.
CD Player/Changer not functioning. Out of operating temperature range +50C (+120F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool. CD playback sound is wavering. Moisture condensation in the CD Module. - Allow enough time for the condensation to evaporate (about 1 hour).
CD insertion not possible. A CD is already in the CD player. - Eject the CD and remove it. The CD is being improperly inserted. - Make sure the CD is being inserted following instructions in the CD Player Operation section. Unable to fast forward or backward the CD. The CD has been damaged. - Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism. CD playback sound skips due to vibration. Improper mounting of the unit. - Securely re-mount the unit. The disc is very dirty. - Clean the disc. The disc has scratches. - Change the disc. The pick-up lens is dirty. - Do not use a commercial available lens cleaner disc. Consult your nearest ALPINE dealer. CD playback sound skips without vibration. The disc is dirty or scratched. - Clean the disc; damaged disc should be replaced. Error displays (built-in CD player only) Mechanical error - Press c. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest ALPINE dealer. CD-R/CD-RW playback not possible Close session (finalization) has not been performed. - Perform finalization and attempt playback again.
Mechanism error. 1) Press the c button and eject the CD. If not ejecting, consult your Alpine dealer. 2) When the error indication remains after ejecting, press the c button again. If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.
No magazine is loaded into the CD Changer. - Insert a magazine.
No indicated disc. - Choose another disc.
NOSEPIECE SIZE Width Height Depth
Due to continuous product improvement, specifications and design are subject to change without notice.
FM TUNER SECTION Tuning Range Mono Usable Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio MW TUNER SECTION Tuning Range Sensitivity (IEC Standard) LW TUNER SECTION Tuning Range Sensitivity (IEC Standard) CD SECTION Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation PICKUP Wave length Laser power 87.5 108.0 MHz 0.7 V 90 dB 65 dB 35 dB 2.0 dB 531 1,602 kHz 25.1 V/28 dB kHz 31.6 V/30 dB 5 20,000 Hz (1 dB) Below measurable limits 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) 795 nm CLASS I
CLASS 1 LASER PRODUCT
(Bottom side of player)
REMOTE CONTROL (CDA-9815RB/CDA-9813R/CDA-9812RX only) Battery Type AAA sized dry battery Battery Quantity 2 Dimensions (W H D) 42 mm (1-21/32") 121 mm (4-25/32") 23 mm (29/32") Weight (without battery) 50 g (1.8 oz) GENERAL Power Requirement 14.4 V DC (1116 V allowable) Maximum Power Output 60 W 4 Maximum Pre-Output Voltage 4 V/10k ohms Bass (CDA-9812RX/CDA-9811R only) 14 dB at 60 Hz Treble (CDA-9812RX/CDA-9811R only) 14 dB at 10 kHz Weight CDA-9815RB/CDA-9813R 1.7 kg (3 lbs. 12 oz) CDA-9812RX/CDA-9811R 1.5 kg (3 lbs. 5 oz)
Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.
SR-61NTB Fo-155 355 KEH-P6200RDS CMT-RB5 RX-V692RDS KX-P1150 Grade NEC LT30 880GMH-LE Usb3 Lwhd8000RY6 114 EQ Dista T300 1200SI TX-88 28DW6559 SDM-HS95 NF7 3IN1 KDL-32P3020 X3580 DFL-860E HB620T CI 482 HR2074 Roland D110 Keyboard A75-S206 HX270S SB916SK SF560R-XEF KDC-7090R MD-R3H Sbcsc280 VP-MX20CH SP-URC89c-0757 SC-HTB500 CA-1000 KRF-V5560D WAP54G Scaleo E Review KS890EC SCH-A950 Fo-50 Player 10 TX-710L Tycoon 740 Live Laserjet 8550 SA3045 02 HT-BD1255R AQV12nsbx OD-20 Gpsmap 178C Superb Xerox 2400 AW2126F MPA680 MDS-501 Equium L40 LBT-XB6 Ipod Nomad BOY 71 Easyshare C360 CMT-MX550I DTH220E SS-RXD8S GR10A Bermuda MP35 XT-V70 FX-9860GII SD 3600GT GFA-6000 MCD2662EM PRO 8 Kodak C643 Shotgun VGN-AR41L AJ-D400 SDC-620II Innov-IS 700E KR-A3070 YBR125-2004 Dvdr3330H 02 R250S PRO KDC-C719MP STR-DE897 KDC-122 1600 TSS CMT-A70 CDX-GT510 X854E 609 PE CW-29Z338P HL-2070N GT-C3212 XA-HD500 Cyclonic LX-M240A RX-DS15 Kxtg8521E Siemens S65
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101