Here you can find all about Alpine CDA-9830 like manual and other informations. For example: .
Alpine CDA-9830 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Alpine CDA-9830 please write about it to help other people. [ Report abuse or wrong photo | Share your Alpine CDA-9830 photo ]
Alpine CDA-9830 Car Audio, size: 1.1 MB
User reviews and opinions
|merry||3:28pm on Sunday, September 19th, 2010|
|Classic look with Alpine quality, Great sound not too pricey Somewhat dim and boring display|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
CQDFX883U CAR RECEIVER
Alpine CDA-9847 CD/MP3/WMA Rec CD/MP3/WMA Alpine CDA-9847 Receiver MP3 CD Receivers $299.99
Bazooka Bazooka BTSubwoofer Tube Non-powered BT8014 Subwoofers"
CD/MP3/WMA Receiver MP3 CD Receiver
Alpine HDA-5460 Hard Disk Drive Player
Clarion Sirius SIRCL Satellite Radio Sirius Satellite Radio Tuner SIRCL1 For Aftermarket Stereos
Clarion DXZ845MC AM/FM CD/MP3/WMA Clarion DXZ845MC Player/Digital Recorder $461.00
Receiver / Mobile Multimedia Station
Infinity 1230W 12" Subwoofer
Panasonic Panasonic CQ-C5310U CD Receiver w/ MP3 and CQ-C5310U WMA Playback
Sony XM-DS1300P5 Mono 500 Watt Amplifier
55W x 4 CD Deck with 2-Step Motorized Detachable Dual XD7500 Faceplate/CD-R/RW Playback - Gray/Silver - XD7500 This deck dazzles the eyes with a. $244.95
Sony RMX-4S Wired Rotary Commander
NUMARK CDN36 DUAL CD W/ SCRATCH
Sony XS-V6950H 6" x 9" 4-Way Speakers (Pair)
Pyramid 10 BAND GRAPHIC EQUALIZER/ AMPLIFIER 200 WATTS OUTPUT 903G
Delphi SA10113 MyFi XM2Go Portable XM Satellite Delphi SA10113 Tuner Universal Add-on $449.99
Infinity KAPPA 50.5CS 5 1/4" Two-Way Infinity KAPPA 50.5CS Component System $323.99
Type-S SPS171A 6-1/2IN. 2-way Component Speakers Alpine SPS171A System $299.99
Infinity KAPPA 10.5T
Infinity KAPPA 10.5T 1" C.M.M.D. Tweeter (Pair)
Sony CDX-F5500 CD Receiver
Kenwood Usa Kenwood KFC-P505IE 5 1/4" Midrange and 1" Tweeter Package KFC-P505IE
Q-LOGIC QLH-6510SE Q-Logic 10" Subwoofer Q Logic QLH-6510SE Enclosure This subwoofer box from Q-Logic is perfect for your 10" sub. It features a. $104.99
Q-Logic QL-C1FSX110 Black 00-up Ford Q Logic QL-C1FSX110-A01 Super Duty Ex-Cab 1x10 box Vehiclespecific Enclosures" $329.99
Polk Audio MM 4-ohm Component Subwoofer Polk AA2084-A 8" Component Subwoofers" $159.99
Metra VT-GMRC-01 GM Class II Data bus Interface Metra GMRC-01 Factory System Adapters $109.99
PIE Pioneer IP-Bus Din to Din 5.58 meter IP-Bus PIE PIO/P-DIN Cable male-to-male Adapters & Cables $59.99
Sirius Portable Satellite Radio Tuner with Car Docking XACT XTR1CK Kit - XTR1CK Tap into 120 channels of satellite radio, more than half of which. $262.00
Car CD Player
Kenwood Usa Kenwood KRC-335 Cassette Receiver with CD Changer Controls KRC-335
Sony CDX-F7700 CD Receiver
Alpine CDA-9831 CD MP3 WMA Player Detachable, Alpine CDA-9831 fold-down face, 4-volt front, rear and subwoofer preamp outputs, XM Satellite Ready. $429.99
Kenwood Usa KDC-3025
Alpine CDA-9835 CD/MP3/WMA Receiver
52W x 4 CD Deck with MOSFET Amp/MP3 Aiwa CDC-X504MP Playback/Detachable Faceplate - Silver - CDCX504MP Make the drive a rocking one with a CD deck. $239.99
Clarion ADB340MP CD/MP3/Cassette Receiver All CD Clarion ADB340MP Receivers $436.25
Neo Car Audio RCD Auto Changer
DETACHBLE FACE SINGLE CD PLAYER
Kenwood Usa Z727
Kenwood Z727 CD Receiver
Infinity REF1001T 1" Edge-Driven Textile-Dome Tweeter Infinity REF1001T (Pair) $93.99
Kenwood Usa Kenwood DPX-MP4070 CD/MP3/WMA/Cassette Receiver CD/Cassette Combos DPX-4070
MB Quart MB Quart Premium PCE213 5-1/4 Component System 51/4" Component Systems" PCE213
Alpine KCA-420i Ipod Control Interface Receiver Add-ons
Kenwood Usa Kenwood DPX-6020 Double-Din CD-Cassette Receiver pt# DPX-6020 DPX-6020
PAC UNIVERSAL STEERING WHEEL PAC SWI-X
Panasonic Panasonic CQC-5210U CD Receiver w/CD Changer CQC-5210U Controls
Kenwood Usa KGC6042A
KENWOOD 9 BAND CAR EQ
Clarion FM200 FM Modulator
Sony XA-C30 Multi-Changer Adapter
Sony CDX-F7000 CD Receiver
Panasonic Panasonic CQ-C9800U High Power Car CD Player CQ-C9800U Digital internal amp, 60 watts RMS x 4, Super Bass
Control Subwoofer, rear auxiliary input. $485.00
Blaupunkt BPVA08 Adapter For CDCA08 Changer or Blaupunkt F00E500029 AUX-In Adaptation Adapters & Cables $19.99
FARENHEIT Farenheit EFM-01 Phase Lock Loop FM Modulator FM Modulators EFM-01
Rockford Fosgate Rockford Fosgate PL3-Hatchback Subwoofer Non-powered Subwoofers" PL3110
Audiobahn AW1200Q 12" High Excursion Woofer
Alpine CDA-9820XM XM/CD Receiver
Kenwood Usa Kenwood Excelon KDC-X879 CD MP3 WMA Player plays MP3 and WMA files, 3D MASK Pro motorized, KDC-X879
detachable face, dual zone audio control. $479.00
Clarion SIRCR Car Kit w/Wireless FM Transmitter SIRIUS
Sony CDX-757MX 10-Disc CD Changer
PYLE DUAL CD PLAYER PYLE PDCD-4000
Panasonic Panasonic CQR111U Panasonic CQ-R111U Cassette CQR111U Receiver
Clarion SRW2541 10" Single Voice Coil Subwoofer
Lanzar SX7 In-Dash Electronic Crossover
Delphi SA10003 SKYFi FM Modulator
Panasonic CQ-C3100U CD Receiver
Kenwood Usa Car Docking Kit for Here2Anywhere Portable Sirius Satellite Radio Tuner - KPA-H2CFM Get rocking in KPA-H2CFM
your car with a docking kit designed. $59.99
Alpine MRD-M1001 500W x 1 Car Amplifier Mono Alpine MRD-M1001 Subwoofer Amps $899.99
Gli Pro XW-1088
Gli Pro XW-1088 '10" High Quality PA Woofer
Pyle PLCDCS300 Pyle PLCDCS300 Double Din Pyle PLCDCS300 AM/FM-MPX Cassette Player w/ Flip Down Detachable Face $255.00
Rosen Rosen R5600 Oem-Validated, Slot-Load DVD Player With R5600 Tuner
Rockford Fosgate Punch 12" Single-Voice-Coil 4-Ohms Subwoofer with Polypropylene Cone - P112S4 Bust out the P112S4
mean bass with this 12" sub and. $99.99
Kicker 04S15L7 Solo-Baric L7 15" Dual 4-ohm Voice Coil Kicker 04S15L74 Subwoofer $699.99
PIE PIO/P-RCA Adaptor P-Bus MCD To Aux Input PIE PIO/P-RCA FAB Adaptor Auxiliary Input Adapters $49.99
AUDIOVOX SIRIUS HOME DOCKING STATION
Kenwood Usa Kenwood KDC-MP825 3D MASK Sirius Ready CD/MP3 Receiver KDC-MP825
Rockford Fosgate Punch 900W Mono MOSFET Amplifier with Selectable Bass Boost - P3001 Unleash the P3001
hounds in your subwoofers with a MOSFET amp that shoots. $349.99
150 Watt Active Subwoofer
DELPHI Roady 2 XM Radio Receiver SA10109
Infinity KAPPA 63.5I
Infinity KAPPA 63.5I 6 1/2" 3-Way Loudspeaker
Micro Innovations 3PC DELUXE SUBWOOFER SPEAKER SYSTEM MM640D
Alpine KCA-130B Male Ai-Net to Female M-Bus Adapter
Kenwood Usa Kenwood KDC-X969 CD/MP3/WMA Receiver w/ CD Changer Controls KDC-X969
Kenwood Usa Kenwood KDC-MP625 CD/MP3/Sirius Ready Receiver KDC-MP625
RT-CHANNEL RIOT SERIES AMPLIFIER
Rockford Fosgate Rockford Fosgate Power Stage 1 T112DDual 4-ohm Component Sub 12" Component T112D4
Kenwood Usa KGC9044
Kenwood KGC-9044 11-Band Equalizer
TERK MARINE XM SATELITE RADIO ANTENNA
V12 AccuClass-D Mono Amplifier
Kenwood Usa KDC-205
Panasonic Panasonic CQ-C8100U CD Receiver w/CD Changer CQ-C8100U Controls
Clarion ProAudio DXZ555MP CD/MP3/WMA Receiver Clarion DXZ555MP MP3 CD Receivers $279.99
Panasonic CQ-SRX7000U Player/Receiver with Dot Panasonic CQSRX7000U Matrix LCD and CD Changer Control $919.99
10" Car Audio Vibrant Subwoofer Enclosure
55W x 4 CD Deck with 2.5" TFT LCD TV Dual XDV8125 Monitor/Digital AM/FM Tuner, Gray/Silver $499.99
Kenwood Usa Kenwood Excelon KVT-815DVD DVD CD MP3 KVT-815DVD WMA Receiver Dual-zone capability, touch-screen
controls, dual-zone capability, 3 sets of 5-volt. $1269.00
7" FLIP OUT SCREEN WITH AM/FM/TV TUNER Car Pyle PLTV7R Audio $578.98
Pyle PLTV64 6.4" In-Dash Monitor w/AM/FM Tuner & CD Pyle PLTV64 Changer Controls $493.00
Mobile Authority UTS-1300
Audio/Video Tuner Controller with Antennas
Clarion VRX745VD MP3 DVD Miltimedia Player Clarion VRX745VD ProAudio Touch-Panel Control unit, Plays MP3 Files on CD-R/RW Discs, IR Remote Control. $1499.99
Clarion AVC-L1-T 2000-2001 Lexus RX300 Tan
Starvision SPF-1502 LCD Monitor w/IR Transmitter
Kenwood Usa Kenwood SK-701RM Mounting Arm for Video Monitors SK-701RM
PANASONIC CY-VHD9500U Panasonic Overhead Panasonic CY-VHD9500U Mobile Video System with Digital Camera This Panasonic mobile video system offers a total. $1035.00
Sony XAV-7W A/V Receiver
7" Wide LCD Monitor AM/FM/DVD Player/Changer Control Lanzar STVD7IN $799.99
Sony XVM-H65 6.5 Flush Mount LCD Color Monitor
Sanyo CDV-7004 Mobile Video Entertainment System
Lanzar SVDVDIN70 7" In-Dash Monitor & DVD Player Lanzar SVDVDIN70 & Graphic Touch Screen $854.99
17" Overhead TFT-LCD 169 Widescreen Monitor
Power Acoustik PT-ID7300
7 Wide TFT/LCD Monitor
Pyle PLBINDV7 In-Dash Monitor w/ DVD/TV/FM/AM
Power Acoustik POWER ACOUSTIK PWA MOBILE AV ACCESSORY 85 UNIV. CEILING MOUNT PT852CM
POWER ACOUSTIK PT-852CM $387.95
Clarion TTX7501Z TV Tuner for CeNet
Power Acoustik PowerAcoustik PT-501MH 5" Headrest Color Monitor PT-501MH
Power Acoustik PowerAcoustik PT-75HB 7.5" STN-LCD Monitor with Headrest Kit PT-75HB
FARENHEIT Farenheit MDLCD Overhead Monitor Overhead" MD1000
Sanyo ECD-T1580DV DVD Receiver/6.5 Monitor Sanyo ECD-T1580DV DVD with Monitors" $799.99
Delphi MV10021 Neutral 10 Overhead DVD Delphi MV10021-11B1 Overhead" $999.99
Power Acoustik PT-74
7.2 Wide Screen Monitor
Clarion Clarion VDH910 VHS Hi-Fi Video Cassette Player with Tuner VDH910
Clarion VMA6491 6.4" Color LCD Monitor
10.4" Overhead TFT-LCD Monitor
Kenwood Usa LZ-H70W
Kenwood LZ-H70W Overhead Console
Legacy LM56 5.6" Color LCD Monitor w/ Front Controls
Power Acoustik POWER ACOUS 7 TFT LCD HEADREST MONITOR PT700MHR
TracVision KVHA5 Car Satellite TV system
Pyle PLVWR81IR 8" TFT LCD Mobile Roof Mount Pyle PLVWR81IR Monitor w//Wireless Headphones $315.00
Pyle PLTV165 6.5" In-Dash Monitor w/Built-In TV
PYLE 5 POP UP MONITOR R/C AM FM TV TUNER
Audiovox 4 Inch LCD Monitor
7.2 LCD SCREEN & BUILT IN SPEAKER Pyle built this Pyle PLWHR7 7.2" LCD monitor to withstand the abusive conditions of the car environment. $288.88
X 768 WXGA HDTV/PC Monitor 23 HDTV / PC Zenith L23W36 Monitor, Built-In NTSC Tuner, 1280 X 768 WXGA Resolution, $1499.00
Blitz BZTV7R 7" Wide Screen TFT LCD Monitor
Pyle PLTVCP85 Video Cassette Recorder w/Built-in TV Pyle PLTVCP85 Tuner $250.00
Kenwood Usa KVT-M700
Kenwood KVT-M700 In-Dash Television/Receiver
Mobile Authority MOBILE AUTHORITY AUDIO/ VIDEO SWITCHER AV44RF
Power Acoustik POWER ACOUSTIK 7 TFT LCD SUN VISOR MONITOR PT729MSV
Panasonic CQ-VD7200U DVD MP3 Player 7" Monitor Panasonic CQ-VD7200U DVD MP3 Playback, 7 " TFT Active Matrix, OneTouch Tilt, Anti-Shock Memory, TV. $1185.00
Power Acoustik PT-738MSV
PowerAcoustik PT-738MSV 7" Sunvisor Module
Power Acoustik POWER ACOUSTIK 10.4 FLIP-DOWN LCD MONITOR WITH DVD PLAYER PMD104CMX
Panasonic Panasonic PKG-AV1 Rear DVD & AV Device Package Rear Seat Video & SD Multi AV Device Package includes PKG-AV1
the CY-VHD9500U and. $1099.99
Power Acoustik POWER ACOUSTIK PWA MOBILE AV ACCESSORY 8.5 COMBO CEILING MT POWER PMD85CM
ACOUSTIK PMD-85CM $667.88
Starvision TM-720X Monitor Mobile Video Kit
Starvision TM-6F 6" Roof Mount LCD Monitor
Starvision SP-56H 5.6" TFT Color Monitor
Starvision SP-6HS 6" NTSC Full Color LCD Monitor
Starvision SPF11.3FM 11.3" Color TFT LCD Monitor w/ Starvision SPF-11.3FM IR & FM Transmitter $449.99
Starvision Starvision TM-703IR Flip Down Monitor With IR TM-703IR Transmitter
Starvision Starvision TM-RVM4 Universal Wide Angle Rearview TM-RVM4 Mirror with Built in 4" Monitor
8" All-In-One Mobile DVD/Video System (Neutral)
8" All-I-One Mobile DVD/Video System (Gray)
PYLE 6.5' LCD CAR DVD PLAYER, MOTORIZED PULL Pyle PLDVD65T OUT MONITOR => Model PLDVD65T 10 $484.99
Clarion TTX-001 Stand Alone/Slave TV Tuner
Turn the Rotary encoder until the desired sound is obtained.
Detaching and Attaching the Front Panel
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume level by 20 dB.
Turn off the unit power. Press (Release) at the upper left side until the front panel pops out. Grasp the left side of the front panel and pull it out.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its previous level.
Changing the Display Type
There are three selectable display types (only one for the CDA-9830). You can also deactivate the display.
The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction. To protect the front panel, place it in the supplied carrying case.
Press DISP/B.OUT to switch the display type.
Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. Push the left side of the front panel until it locks firmly into the main unit. 2 1
Type1 Type2 Type3 OFF Type1 Type1 : The indicator on the left changes in a fixed sequence. Type2 : The indicator on the left changes according to the setting (see "Setting the Multicolor Illumination" on page 22). Type3 : The indicator on the left changes according to audio level.
VOLUME SETTING LEVEL INDICATOR OFF VOLUME SETTING Audio Level Display
Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. Attach the front panel carefully. Hold the panel by its sides to avoid pushing any buttons by mistake.
SOURCE/ TUNE/ POWER A.ME BAND/ TEL. SEARCH
Press g or f to tune in the desired station.
Holding down g or f will change the frequency continuously.
Station Title Search Function
If the title of a radio station is entered, you can search for that radio station by its title while listening to the currently received radio station.
CD / MP3 / WMA
SOURCE/ POWER -/J TITLE 8 SEARCH
Press SEARCH Search mode.
in Radio mode to switch to Title
The first title input blinks in the display.
Select the desired title by turning the Rotary encoder within 10 seconds. Press the Rotary encoder to receive the frequency of the selected title.
Search mode in Title Search mode is canceled by pressing and holding SEARCH for at least 2 seconds. If a station has no title, "NO TITLE" is displayed for 2 seconds.
g f Rotary 9 encoder
Playback Frequency Search Function
You can search for a radio station by its frequency.
Press and hold SEARCH for at least 2 seconds in Radio mode to activate Frequency Search mode. Turn the Rotary encoder within 10 seconds to select the desired frequency. Press the Rotary encoder to receive the selected frequency.
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Search mode in Frequency Search mode is canceled by pressing and holding SEARCH for at least 2 seconds.
The movable display will close and playback will begin. When a disc is already inserted, press SOURCE/POWER to switch to the CD mode. The mode will change every time the button is pressed.
TUNER CD CD CHANGER* TUNER
* Only when the CD changer is connected
While playing back MP3/WMA, press 8 or 9 to select the desired folder.
Pressing and holding 8 or 9 will change folders continuously.
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file): Press g. Fast backward : Press and hold g. Advancing to the beginning of the next track (file) : Press f. Fast forward : Press and hold f.
To pause playback, press -/J.
Pressing -/J again will resume playback.
To eject the disc, press c.
Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. If the CD does not eject, press and hold c for at least 2 seconds with the movable display open.
The CD-player can play discs containing audio data, MP3 data and WMA data. A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit. "MP3" is displayed during MP3 playback. "WMA" is displayed during WMA playback. The track display for MP3/WMA data playback is the file numbers recorded on the disc. If the HDA-5460 model is connected to the unit, some operations (for example changing the source, selecting the file by holding buttons up or down, etc.), can be carried out on this unit.
Playing back a Playlist
You can play playlists you have prepared in advance on the computer. Both MP3 and WMA playlists can be played. Playlists that can be played back by this device have the file extension "m3u"/"asx."
Press 8 or 9 to select a playlist.
By pressing and holding 8 or 9, the playlists move up or down continuously. If there is a playlist and folder on the disc, the playlist starts to play back prior to the folder. Up to 5 playlist can be played back. Playlists from the 6th onwards cannot be played back. Refer to the software instruction manual on how to create a playlist.
MP3/WMA Play Display CDA-9831
The folder number, file number, sampling rate, and bit rate will be displayed as described below.
File number display
While playing back a playlist, the folder and file numbers that are stored in the playlist are displayed.
Sampling rate Folder number display display
The sampling rate and the bit rate (frame display) are alternately displayed.*
Bit rate display
Folder number display
* When the unit is connected to the Amplifier Link, the temperature is automatically indicated. Sampling rate Bit rate Temperature Sampling rate
The folder number and file number will be displayed as described below.
Folder number File number display display
Press TITLE to switch the display. Please see Displaying the Title/Text (page 19) for information about display switching.
Press 4 ( played.
Press 4 (
M.I.X. (Random Play)
Press 5 ( ) in the play or pause mode.
The tracks (files) on the disc will be played back in random sequence. To cancel M.I.X. play, press 5 ( ) again.
) to play back repeatedly the track being
The track (file) will be played repeatedly. ) again and select OFF to deactivate repeat play.
CD mode : RPT : Only a track is repeatedly played back *1 RPT (off) : A disc is repeatedly played back
CD mode : M.I.X.: Track are played back in random sequence.
*1 When a CD changer is connected If REPEAT is set to ON during M.I.X. play in CD changer mode, M.I.X. will apply to the current disc only.
*3 M.I.X.: The tracks on all the CDs in the current magazine will be included in the random playback sequence. (off)
*3 When a CD changer equipped with the All M.I.X. function is connected If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode : RPT RPT : Only a file is repeatedly played back : Only files in a folder or playlist are repeatedly played back
MP3/WMA mode : M.I.X.: Only files in a folder are played back in random sequence. M.I.X.: Files are played back in random sequence. If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc. (off)
*2 RPT : A disc is repeatedly played back (off)
*2 When an MP3 compatible CD changer is connected If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. If a 12-disc CD changer is connected: In CD changer mode, press F twice to illuminate the "FUNC" indicator, and go to the step above within 5 seconds.
If a 6-disc CD changer or an MP3 compatible CD changer is connected: In CD changer mode, press F to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. If a 12-disc CD changer is connected: In CD changer mode, press F twice to illuminate the "FUNC" indicator, and go to the step above within 5 seconds. When playing back a playlist, M.I.X. cannot be played.
Example 2. Listening Position: All Seats
Adjust the time correction level of each speaker to almost the same level.
Sit in the listening position (drivers seat, etc.) and measure the distance (in meters) between your head and the various speakers. Calculate the difference between the distance to the farthest speaker and the other speakers.
L = (distance to farthest speaker) (distance to other speakers)
Example 1. Listening Position: Front Left Seat
Adjust the time correction level of the front left speaker to a high value and the rear right to zero or a low value.
Divide the distances calculated for the speakers by the speed of sound (343 m/s (765 mph) at 20C).
These values are the time correction values for the different speakers.
The time difference between the front-rear/left-right speakers, can be adjusted at the same time. With an initial delay of 0.1 ms for each of the 0 to 99 steps, audible time correction can be done.
Press and hold MENU for at least 2 seconds. Press MENU to select T.CORR (T-CORR for CDA-9830). Press g or f to select the Bass Focus mode.
Bass Focus mode Time Correction mode
*1 Subwoofer speaker. You cannot change the Time Correction value for the subwoofer, but you can set the subwoofer's apparent position to the front by adjusting the Time Correction value of the front and rear speakers. For details, refer to the *1 on page 17. The sound is not balanced because the distance between the listening position and the various speakers is different. The difference in distance between the front left speaker and the rear right speaker is 1.75 m (68-7/8"). Here we calculate the time correction value for the front left speaker in the diagram on the above.
Conditions: Farthest Speaker listening position : 2.25 m (88-9/16") Front left speaker listening position : 0.5 m (19-11/16") Calculation: L = 2.25 m 0.5 m = 1.75 m (68-7/8") Time correction = 1.75 343*= 5.1 (ms)
Press BAND/TEL. to select the speakers to be adjusted (see below).
Front (left-right) speakers
Any manual time correction adjustments will also affect corrections made in Bass Focus. Bass Focus mode is automatically canceled if no operation is performed within 15 seconds.
Example setting for steps 4 and 5
(1) Press BAND/TEL. to select the front (left and right) speakers. Then turn the Rotary encoder to select 1.5 ms (Delay no. 15 in the table). The time difference is 1.5 ms for both front (left and right speakers.
(2) Press BAND/TEL. to select the left (front and rear) speakers. Then turn the Rotary encoder to select 1.5 ms (Delay no. 15 in the table). The time difference is 3.0 ms*2 for the front left speaker, and 1.5ms for the left rear speaker, creating the impression of an equal listening between the front left speaker and the other speakers.
3.0ms 1.5ms 1.5ms
*1 Subwoofer speaker. Delay (turn the rotary encoder) the audio signal to the front (left and right) speakers to make the apparent position of the subwoofer to be at the front. In doing this, the apparent position between the front (left and right) speakers and subwoofer will appear equal to the driver. After performing the above, you can change the positions of the left and right speakers by delaying the time. *2 Because the time difference was already set to 1.5 ms for the front left speaker to begin with, the additional correction of 1.5 ms makes the total time difference of the front left speaker 3.0 ms.
Adjusting and Storing the Time Correction
Before performing the following procedures, refer to "About Time Correction" (page 16).
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise.
Press and hold MENU for at least 2 seconds. Press MENU to select T.CORR (T-CORR for CDA-9830). Press g or f to make time corrections.
Each press changes the mode as follows:
Press MX to select MX ON. Press SOURCE/POWER to select the source to which you want to apply MX (Media Xpander). Press and hold MX for at least 2 seconds to activate the level setting mode. Turn the Rotary encoder to select your preferred level or OFF.
Press BAND/TEL. to select a speaker to be adjusted.
CDA-9831 Front L Front R Rear L Rear R Front L
FM (MX level 1 to 3): The medium to high frequencies become clearer, and produces well balanced sound at all frequencies. CD/WAV (MX level 1 to 3): CD mode processes a large amount of data during playback. MX takes advantage of this large data quantity to reproduce a more clear, clean output. MP3/WMA/XM (MX level 1 to 3): This corrects information that was lost at the time of compression. This reproduces a well-balanced sound close to the original. DVD (Video CD) (MOVIE MX level 1 to 2): The dialog portion of a video is reproduced more clearly. (MUSIC MX level 1): A DVD or Video CD contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately. AUX (MX level 1): Choose the MX mode (MP3, MUSIC, or MOVIE) that corresponds to the media connected. If two external devices are connected, a different MX mode for each media can be selected.
Press and hold DISP/B.OUT for at least 2 seconds to activate the blackout mode.
The display will turn off. If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. To cancel Blackout mode, press and hold DISP/B.OUT for at least 2 seconds.
Repeat steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder after entering the 8th character automatically stores the title into memory. When entering a title of less than 8 characters (for example, 3 character title): After entering 3 characters, the 4th character space will be blinking. Go to step 6 to complete the title.
to record the title.
If you cancel while entering a title, selected characters are not written. You can enter 24 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show FULL DATA. At this point, no more titles can be stored. To input a new title, one of the previously inputted titles must first be deleted. The CD Changer title length or memory capacity varies depending upon the model being used. When you want to erase a title, enter the ( for CDA9830) symbol into all spaces. The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be canceled if no action is taken for over 10 seconds.
Setting an Amplifier Link (CDA-9831 only)
With an external Amplifier Link compatible amplifier MRD-M501 or MRD-M301 is connected, the amplifier settings are adjustable from the head unit. A maximum of 8 external amplifiers can be adjusted.
To easily recall adjusted and stored contents
1) Press MENU to select A-Link. 2) Press g or f to select AMP 1 to 8. 3) Turn the Rotary encoder to select Preset 1 or Preset 2. 4) Press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. For details of each of the settings, refer to the Owner's Manual of the external amplifier. If amplifier settings are made on the CDA-9831 model, do not then change the setting with the amplifier buttons as the amplifier display may not match the operations of the CDA-9831 model. "NO Link" is displayed if the amplifier is removed or its power cannot be turned on, etc.
Successfully downloaded items are indicated as checked boxes on the confirmation screen.
http://www.alpine.com or http://www.alpine-usa.com
Downloadable data Parametric equalizer Time correction Crossover Data is memorized in Preset 2 of the Parametric EQ mode. Data is memorized in Preset 2 of the Time Correction mode. Data is memorized in Preset 2 of the crossover mode.
PARAMETRIC EQ data The data is memorized in Preset 2 of Parametric EQ mode. The memorized data settings in Preset 2 (Parametric EQ mode) are automatically applied. HPF/LPF (Cross over) data The data is memorized in Preset 2 of HPF/LPF mode. The memorized data settings in Preset 2 (HPF/LPF mode) are automatically applied. TIME CORRECTION data The data is memorized in Preset 2 of the Time correction mode. The memorized data settings in Preset 2 (Time Correction mode) are automatically applied.
The file name of download data shall be A_W*****.MP3. A_W.MP3 Extender (fixed) Identifier (alphabet or number 5 letters maximum) Header (fixed)
The display returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.
When you download the data again, the data is overwritten in Preset.
You can create a file name via the website. Do not change a file name once it has been created. Malfunction may result. For details about procedures of download, see ALPINEs Web site. If the HDA-5460 model is connected to this unit, the HDA-5460 hard disc can be used. Data that has been stored in the hard disc is downloaded by the Data Downloading operation to CDA-9831. For details on how to download data to the hard disc, refer to the Owners Manual of the HDA-5460 model. If an external audio processor is connected, data that is downloaded cannot be used.
You can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from Sound Customizing, Visual Customizing, etc., to select your desired setting.
SOURCE/ BAND/ POWER TEL.
Switching the Tuner Mode
TUNER MODE NORMAL (Initial setting) / HI-FI / STABLE
This unit incorporates the MAX TUNE SQ for the highest quality tuner audio. Moreover, you can choose between three settings to suit your own personal sound preferences and usage.
NORMAL: Standard setting HI-FI: Sound quality priority setting STABLE: Noiseless priority setting
If you find the sound is very noisy while listening to the tuner in HiFi mode, we recommend you change to Normal mode.
Subwoofer On and Off
SUBWOOFER ON (Initial setting) / SUBWOOFER OFF
When the subwoofer is on, perform the steps below to adjust the subwoofer output phase and level.
1 Press the Rotary encoder repeatedly to select the SUBW mode.
The selected station is stored.
Repeat the procedure to store up to 5 other channels onto the same band.
Press SOURCE/POWER to select XM mode. Press BAND/TEL. to select XM1, XM2 or XM3.
Each press changes the band:
XM1 XM2 XM3 XM1
To use this procedure for other bands, simply select the band desired and repeat the procedure. A total of 18 channels can be stored in the preset memory (6 channels for each band; XM1, XM2 and XM3). If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one.
Press 8 or 9 to select desired category.
Holding down 8 or 9 will change categories continuously.
Receiving Stored XM Channels
Press g or f to select the desired channel.
Holding down g or f will change channels continuously.
Press BAND/TEL. to select the desired band (XM1, XM2 or XM3).
When using the optional remote control (RUE-4190), an XM Channel can be directly called up with the numeric keypad of the remote control. 1 While in XM Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control. 2 Press ENTER or + 10/OK on the remote control within 5 seconds to receive the XM Channel. If the channel number is 3 digits, the XM Channel is automatically received after the channel number is input.
Press the channel preset button that has your desired satellite channel in memory.
Channel/Category Search Function
You can search for programs by Channel No. or Category.
Press SEARCH in the XM mode to select Channel Search mode or Category Search mode.
Channel Search mode:
Turn the Rotary encoder to select the desired Channel No.* within 10 seconds.
* The Channel No. is selected within the selected Category.
When the "Scroll Setting" (page 24) is set to "SCROLL AUTO," the display scrolls continuously. When the Scroll Setting is set to "SCROLL MANUAL," the display scrolls only once after any function is performed (PRESET, BAND, SEARCH, etc.). Press and hold TITLE for more than 2 seconds to scroll the display manually. Channel Number and Clock displays do not scroll. Depending on the model, the display may differ from the one shown above. When displaying the Music Title/Channel Name, the number 6, described in the section About the indicator display (page 19), is lit. When displaying the Artist Name, the number 4, described in the section About the indicator display (page 19), is lit.
Radio is being updated with latest encryption code. - Wait until encryption code is being updated. Channels 0 and 1 should function normally.
XM signal is too weak at the current location. - Wait until the car reaches a location with a stronger signal.
ERROR - 02
A disc is left inside the CD Changer. - Press the eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.
Radio is acquiring audio or program information. - Wait until the radio has received the information.
The channel currently selected has stopped broadcasting. - Select another channel.
No magazine is loaded into the CD Changer. - Insert a magazine.
No indicated disc. - Choose another disc.
The user has selected a channel number that does not exist or is not subscribed to. - The unit will revert back to the previously selected channel. There is no artist name/feature, song/program title, or additional information associated with the channel at that time. - No action needed.
FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) CD PLAYER SECTION Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation PICKUP Wave length Laser power REMOTE CONTROL Battery Type Width Height Depth Weight 87.7 107.9 MHz 9.3 dBf (0.8 V/75 ohms) 13.5 dBf (1.3 V/75 ohms) 80 dB 80 dB 45 dB 2.0 dB 530 1,710 kHz 22.5 V/27 dB 5 20,000 Hz (1 dB) Below measurable limits 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) 795 nm CLASS I AAA batteries (2 pcs.) 42 mm (1-21/32") 121 mm (4-25/32") 23 mm (29/32") 50 g (1.8 oz) GENERAL Power Requirement 14.4 V DC (1116 V allowable) Power Output 18 W RMS 4* * Primary amplifier ratings per CEA-2006 Standard Power output: measured at 4 Ohms and 1% THD+N S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 4 V/10 k ohms Weight 1.6 kg (3 lbs. 8 oz) 178 mm (7") 50 mm (2") 152 mm (6") 170 mm (6-11/16") 46 mm (1-13/16") 18 mm (11/16")
For the screw marked *2, use an appropriate screw for the chosen mounting location.
Secure the ground lead of the unit to a clean metal spot using a screw (*3) already attached to the vehicle's chassis.
To amplifier (CDA-9831 only)
Blue POWER ANT REMOTE TURN-ON AUDIO INTERRUPT IN
To power antenna
To amplifier or equalizer
To vehicle phone To the instrument cluster illumination lead (CDA-9831 only)
Gray SPEAKER RIGHT FRONT Gray/Black Violet/Black
# $ % & ( ) ~ +
Speakers Front right
SPEAKER RIGHT REAR Violet
Green SPEAKER LEFT REAR Green/Black
White/Black SPEAKER LEFT FRONT White
CD Changer (Sold Separately)
Speakers Front Left
Front Right Rear Left Amplifier Rear Right
* 1 The label is attached on the bottom of the unit.
1 Amplifier Link Connector Outputs Amplifier Link control signals. Connect this to a separately sold Amplifier Link-compatible amplifier, using the (also separately sold) Amplifier Link box KCE-510M. 2 Antenna Receptacle 3 Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable.
This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.
# Right Front (+) Speaker Output Lead (Gray) $ Right Front () Speaker Output Lead (Gray/Black) % Right Rear () Speaker Output Lead (Violet/Black) & Right Rear (+) Speaker Output Lead (Violet) ( Left Rear (+) Speaker Output Lead (Green) ) Left Rear () Speaker Output Lead (Green/Black) ~ Left Front () Speaker Output Lead (White/Black) + Left Front (+) Speaker Output Lead (White) , Ai-NET Connector Connect this to the output or input connector of another device (CD Changer, Equalizer, etc.) equipped with Ai-NET.
[HOW STATE/PROVINCIAL LAW RELATES TO THE WARRANTY:
This Warranty gives you specific legal rights, and you may also have other rights which vary form state to state and province to province. In addition, some states/provinces do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.
[IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized Installation Center, and this warranty stamped upon installation by the installation center.
[HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following number for your nearest Authorized Alpine Service Center. U.S.A. CANADA 1-800-ALPINE-1 (1-800-257-4631) 1-800-ALPINE-1 (1-800-257-4631)
[HOW TO OBTAIN WARRANTY SERVICE:
1 You are responsible for delivery of the product to an Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or Alpine, Alpine will pay the return shipping charges.
Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A. Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada
MHC-RXD5 MS-6367 NEC E606 KDC-419 EWF1030 MFC-8440 YP-C1V DMC-LX2GK WF-T1022TH DP32746 RKI8400 CHR-185X XJR1300-2006 WAY Wifi Nokia N85 LN-T3232H VCL-E07A SPP-C700 120SW Wtxg55 Sound DS26 Roland CD-2 Sesame HR-J590EU Z10FD FVL328 Cube-80XL 4241-tlxb 250 Q MX DUO SCH-N150 LE32C350 W150I Illustrator CS4 SA-W705 NAD C440 ZE-NC524 EX-9000 KDC-X590 VPL-HW15 RR-QR120 VPC-PD1 DF320 MX450 Hp 450 480DF Server Desktop Sets C475 IP Rout 54-N Sbcru545-00U Spektrum DX8 College II GZ-HD3E 6 JM4 Castle Avon STR-DH500 CJ-V313W Research D-76 TRU9488 Sup 012 Wide Zoom Soundstation 2W DM-R450 KDL-26S2030 VGN-SR29xn S DSC-S40 Dect1221S-19 Pokeball FZ6-2005 MHC-EC99T Ekp1L NAD 710 GX520 EMP-TWD1 PSR-I425 2442FX DXZ435 DVD-SH893 R2400 RTE114 DR-GA500 DZ-BD7HE Samsung M110 F-401 Mf 9545 Logicom L900 Apx500 LE19A656 HCS 455 HT-C306hla0 AV-28BD5EE Nemesis DPP-SV77 FA120C Racing Pslx520 X-COM-apocalypse TPS II 51100 G1
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101